OpenCores
no use no use 1/1 no use no use
Change core in fusesoc
by rxiang on Jan 16, 2016
rxiang
Posts: 2
Joined: May 18, 2015
Last seen: Jan 12, 2017
Hello all,

I am a master student and I am new to fusesoc.

I have booted Linux on DE0-Nano FPGA by following sources:

https://github.com/olofk/fusesoc
https://github.com/openrisc/orpsoc-cores
https://github.com/openrisc/linux
http://cear.ufpb.br/~isaac/site/tutoriais/openrisc (Tutorial)

http://i.imgur.com/X36qdzs.jpg
But the default core is "mor1kx", which is defined in orpsoc_defines.v.

Now I am wondering whether I can use OR1200 to boot Linux.

So I commented out "`define MOR1KX" in orpsoc_defines.v and run Quartus II programmer again.

http://i.imgur.com/oMZAwtu.jpg
But there is no message from SecureCRT window this time.

Should I do something to make it work like mor1kx?

Thanks!
RE: Change core in fusesoc
by fjullien on Jan 18, 2016
fjullien
Posts: 5
Joined: Mar 12, 2014
Last seen: Jan 23, 2018
Hi,

You should stick to mor1kx. Mor1kx is a modern implementation of openrisc architecture.
Plus, mor1kx is maintained.

Franck.
no use no use 1/1 no use no use
© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.