OpenCores

Project maintainers

Details

Name: ocrp-1
Created: Sep 25, 2001
Updated: Jan 22, 2004
SVN Updated: Mar 10, 2009
SVN: Browse
Latest version: download (might take a bit to start...)
Statistics: View
Bugs: 0 reported / 0 solved
Star1you like it: star it!

Other project properties

Category:Prototype board
Language:
Development status:Stable
Additional info:
WishBone compliant: No
WishBone version: n/a
License:

Specifications

- small form factor (1dm2)
- inexpensive surface mount technology (no Ball Grid Array (BGA) chips)
- fast 50k gates or bigger FPGA
- basic I/O capabilities like RS232 and IRDA
- FLASH memory for FPGA configuration and microprocessor code
- fast SDRAM for main memory
- direct access to important signals through Logic Analyzer connectors

Description

OpenCores Reference Platform 1 (OCRP-1) standalone board was designed as a common prototype platform for testing our IP cores. It has a central FPGA for evaluating and testing IP cores, I/O capabilities, DRAM and FLASH memory. It also has several I/O, JTAG and expansion connectors. It even has real-time clock and a battery. Current PCBs have four layers.

IMAGE: block.gif

FILE: block.gif
DESCRIPTION: Block diagram of a OCRP-1 standalone prototype board

Board snapshots

Status

Availability of bare PCBs through <a href="http://www.wilhelm.de/opencores">Wilhelm Mikroelektronik GmbH</a>

It is a 4 layer multilayer with solder mask, hot air leveling finish and component print on both sides. All boards have been electronicly tested against the Gerber data (picture).

Shipping is done by normal air mail in an envelope protected by sealed air. Each letter will contain an official invoice calling the product "printed carrier board for education and evaluation purpose". Wilhelm Mikroelektronik is not responsible for any problems with customs and they do not give any warranty on the board. They don't take responsibility for any problems that might occur when assembling the board and they can´t provide any support for the board.

We would like to stress that the fine pitch SMD parts are not intended for the unexperienced people. You should be sure that you can assemble it. If there is actually a problem with any of the boards (this should not happen because of electronic testing) Wilhelm Mikroelektronik will of course provide a free replacement of the PCB.

If anybody need the stencils for solder cream. They can provide that, too. The price per pair (top/bottom) is USD 100 including shipping. Just add to the order sheet manually. For manual soldering the stencils are not required.

Availability of assembled boards

Due to low demand we have decided not to offer assembled boards.

Ordering

Just completly fill in order form and it fax back to the Wilhelm Mikroelektronik. They will immediatly process the order. There should be sufficient number of boards on stock. Worldwide registered and insured shipping is now per piece. Payment options are credit card or prepayment to their account (if you can't do credit card payment).
If you need to get in contact with Wilhelm Mikroelektronik, you can send e-mail message to ocrp1@wilhelm.de.

The following options are available:

  • unassembled board USD 30,- (plus USD 10 shipping)
  • connector set: J1/J2, CONN-F, POD 1-3, B1, KE1 USD 37,- (USD 15 shipping)

There won´t be any component kits to avoid warranty problems.

Acknowledgment

Special thanks to Matija Golar and DD Digital Development for providing layout services.

Special thanks to Janez Smid, Tomaz Stare, Matija Milostnik and Brane Lipar from Iskratel for help with design, organizing PCB manufacturing and layout services. Special thanks to Franc Dolenc and Iskratel for sponsoring prototype development.

Special thanks to Igor Mohor and Asyst Electronic for assembling the first prototype.

Special thanks to info@wilhelm.de and Wilhelm Mikroelektronik GmbH for manufacturing and providing OCRP-1 boards to the OpenCores community.

Authors