OpenCores

Register Oriented Instruction Sets

Project maintainers

Details

Name: rois
Created: Mar 7, 2016
Updated: Sep 29, 2017
SVN Updated: Jan 20, 2017
SVN: Browse
Latest version: download (might take a bit to start...)
Statistics: View
Bugs: 0 reported / 0 solved
Star2you like it: star it!

Other project properties

Category:Processor
Language:VHDL
Development status:Alpha
Additional info:
WishBone compliant: No
WishBone version: n/a
License: LGPL

Description

The project is microprocessor (uP) architectural exploration with a goal of a high performance FPGA soft core processor(s) over a range of word sizes and instruction encodings. Basic resources are a register file, a block RAM and a "load/store" architecture. Most instructions have 6-bit op-code and three 6-bit source & destination register addresses. Some instructions use 6/12/18 bit immediate fields with corresponding reduction in number of register addresses.

The rois24_24min.zip download has a Xilinx ISE project for the Avnet Spartan-6 FPGA LX9 Micro-Board. It has a full set of basic instructions with a test bench exercising each instruction and condition code. Blinking LEDs code runs on the micro-board. Test bench runs correctly in simulation. This processor uses a 24-bit instruction, 24-bit data and has word addressing.

Performance:
Processor _ _ _ _ Device _ _ _ LUT count _ _ Fmax (in MHz)
ROIS24_24min _ _ Kintex-7-3 _ _ _ 384 _ _ _ _ _ 170

Implementation:
LUT RAM for the register file. Block RAM for program and data.
Single clock pipe: Read next instruction, decode, read operands from LUT RAM, do operation, write result & fetch next instruction on next clock.

Previously:
The rois24_24up_s6_noram.zip download has a Xilinx ISE project for the Avnet Spartan-6 FPGA LX9 Micro-Board. It is a very minimal processor with four instructions: add immediate, add immediate with carry, output and branch. This is sufficient to create blinking LEDs on the Micro-Board via a 48-bit binary counter.