#######################################################################
## File: single_port_ram.IP
##
## Copyright (C) 2014-2016 Alireza Monemi
##
## This file is part of ProNoC 1.8.0
##
## WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT
## MAY CAUSE UNEXPECTED BEHAIVOR.
################################################################################
$ipgen = bless( {
'description_pdf' => '/mpsoc/src_peripheral/ram/RAM.pdf',
'unused' => undef,
'gui_status' => {
'timeout' => 0,
'status' => 'ideal'
},
'modules' => {
'wb_single_port_ram' => {}
},
'parameters' => {
'Aw' => {
'global_param' => 'Parameter',
'info' => 'Memory address width',
'type' => 'Spin-button',
'redefine_param' => 1,
'default' => '12',
'content' => '4,31,1'
},
'INITIAL_EN' => {
'content' => '"YES","NO"',
'redefine_param' => 1,
'default' => '"NO"',
'info' => 'If selected as "ENABLED", the memory content will be initialized at compilation time using MEM_CONTENT_FILE_NAME.',
'type' => 'Combo-box',
'global_param' => 'Localparam'
},
'WB_Aw' => {
'global_param' => 'Don\'t include',
'info' => undef,
'type' => 'Fixed',
'redefine_param' => 1,
'default' => 'Aw+2',
'content' => ''
},
'BYTE_WR_EN' => {
'info' => 'Byte enable',
'type' => 'Combo-box',
'global_param' => 'Localparam',
'redefine_param' => 1,
'content' => '"YES","NO"',
'default' => '"YES"'
},
'TAGw' => {
'global_param' => 'Localparam',
'info' => 'Parameter',
'type' => 'Fixed',
'content' => '',
'default' => '3',
'redefine_param' => 1
},
'FPGA_VENDOR' => {
'content' => '"ALTERA","GENERIC"',
'redefine_param' => 1,
'default' => '"GENERIC"',
'info' => '',
'type' => 'Combo-box',
'global_param' => 'Localparam'
},
'MEM_CONTENT_FILE_NAME' => {
'default' => '"ram0"',
'content' => '',
'redefine_param' => 1,
'type' => 'Entry',
'info' => 'MEM_FILE_NAME:
The memory file name (without file type extension ) that is used for writting the memory content either at run time or at initialization time.
File Path:
For bus-based SoC the file path is {ProNoC_work}/SOC/{soc_name}/sw/RAM/{file_type}/{MEM_FILE_NAME}.
For NoC-based MPSoC the file path is {ProNoC_work}/MPSOC/{mpsoc_name}/sw/tile{tile_num}/RAM/{file_type}/{MEM_FILE_NAME}
file_type:
bin: raw binary format . It will be used by JTAG_WB to change the memory content at runtime.
memh: hexadecimal-string format . It will be used for initialing the Generic RAM using $readmemh command.
mif: memory initialization file format. This file can be used to initialize Altera FPGA memory. Also if the JTAG_CONECT is selected as ALTERA_IEMC it can be used for changing memory content at run time . ',
'global_param' => 'Localparam'
},
'Dw' => {
'content' => '8,1024,1',
'redefine_param' => 1,
'default' => '32',
'global_param' => 'Parameter',
'info' => 'Memory data width in Bits.',
'type' => 'Spin-button'
},
'JTAG_INDEX' => {
'content' => '',
'default' => 'CORE_ID',
'redefine_param' => 1,
'info' => ' A unique index number which will be used for accessing to the memory content using JTAG cable.The default value is the processing tile id (CORE_ID) . You can also inter a unique number for each individula memory.
In case you have \'n\' memory in each processing core you can define their index as "n*CORE_ID+1 , n*CORE_ID+2 ...n*CORE_ID+n-1).
You also can disabled JTAG access here and connect one jtag to wb interface (jtag_wb) to the wishbone bus. Using single jtag index number, a jtag_wb module can read/wr any IP that is connected to wishbone bus slave port (including all memory units).
',
'type' => 'Entry',
'global_param' => 'Localparam'
},
'CTIw' => {
'content' => '',
'redefine_param' => 1,
'default' => '3',
'global_param' => 'Localparam',
'type' => 'Fixed',
'info' => 'Parameter'
},
'SELw' => {
'content' => '',
'redefine_param' => 1,
'default' => 'Dw/8',
'info' => 'Parameter',
'type' => 'Fixed',
'global_param' => 'Localparam'
},
'BURST_MODE' => {
'default' => '"ENABLED"',
'content' => '"DISABLED","ENABLED"',
'redefine_param' => 1,
'info' => 'Enable the Wishbone bus Incrementing burst mode data transfer. Support Linear burst and 4,8,16-beat wrap burst types. ',
'type' => 'Combo-box',
'global_param' => 'Localparam'
},
'BTEw' => {
'redefine_param' => 1,
'default' => '2',
'content' => '',
'type' => 'Fixed',
'info' => 'Parameter',
'global_param' => 'Localparam'
},
'INIT_FILE_PATH' => {
'type' => 'Fixed',
'info' => undef,
'global_param' => 'Localparam',
'content' => '',
'default' => 'SW_LOC',
'redefine_param' => 1
},
'JTAG_CONNECT' => {
'type' => 'Combo-box',
'info' => 'JTAG_CONNECT:
if it is not disabled then the actual memory is implemented as a dual port RAM with the second port is connected either to In-System Memory Content Editor or Jtag_to_wb. This allows that the memory content can be read/written using JTAG. ',
'global_param' => 'Localparam',
'default' => '"DISABLED"',
'redefine_param' => 1,
'content' => '"DISABLED", "JTAG_WB" , "ALTERA_IMCE"'
}
},
'version' => 22,
'ports' => {
'reset' => {
'type' => 'input',
'range' => '',
'intfc_port' => 'reset_i',
'intfc_name' => 'plug:reset[0]'
},
'sa_bte_i' => {
'intfc_name' => 'plug:wb_slave[0]',
'intfc_port' => 'bte_i',
'type' => 'input',
'range' => 'BTEw-1 : 0'
},
'sa_ack_o' => {
'intfc_name' => 'plug:wb_slave[0]',
'intfc_port' => 'ack_o',
'range' => '',
'type' => 'output'
},
'sa_sel_i' => {
'intfc_port' => 'sel_i',
'intfc_name' => 'plug:wb_slave[0]',
'range' => 'SELw-1 : 0',
'type' => 'input'
},
'sa_err_o' => {
'type' => 'output',
'range' => '',
'intfc_name' => 'plug:wb_slave[0]',
'intfc_port' => 'err_o'
},
'sa_tag_i' => {
'intfc_name' => 'plug:wb_slave[0]',
'intfc_port' => 'tag_i',
'type' => 'input',
'range' => 'TAGw-1 : 0'
},
'sa_dat_i' => {
'type' => 'input',
'range' => 'Dw-1 : 0',
'intfc_port' => 'dat_i',
'intfc_name' => 'plug:wb_slave[0]'
},
'sa_cyc_i' => {
'intfc_name' => 'plug:wb_slave[0]',
'intfc_port' => 'cyc_i',
'type' => 'input',
'range' => ''
},
'sa_rty_o' => {
'intfc_name' => 'plug:wb_slave[0]',
'intfc_port' => 'rty_o',
'range' => '',
'type' => 'output'
},
'sa_cti_i' => {
'range' => 'CTIw-1 : 0',
'type' => 'input',
'intfc_name' => 'plug:wb_slave[0]',
'intfc_port' => 'cti_i'
},
'sa_we_i' => {
'type' => 'input',
'range' => '',
'intfc_port' => 'we_i',
'intfc_name' => 'plug:wb_slave[0]'
},
'sa_dat_o' => {
'intfc_port' => 'dat_o',
'intfc_name' => 'plug:wb_slave[0]',
'type' => 'output',
'range' => 'Dw-1 : 0'
},
'clk' => {
'type' => 'input',
'range' => '',
'intfc_name' => 'plug:clk[0]',
'intfc_port' => 'clk_i'
},
'sa_stb_i' => {
'intfc_name' => 'plug:wb_slave[0]',
'intfc_port' => 'stb_i',
'range' => '',
'type' => 'input'
},
'sa_addr_i' => {
'intfc_port' => 'adr_i',
'intfc_name' => 'plug:wb_slave[0]',
'range' => 'Aw-1 : 0',
'type' => 'input'
}
},
'parameters_order' => [
'Dw',
'Aw',
'BYTE_WR_EN',
'FPGA_VENDOR',
'JTAG_CONNECT',
'JTAG_INDEX',
'TAGw',
'SELw',
'CTIw',
'BTEw',
'WB_Aw',
'BURST_MODE',
'MEM_CONTENT_FILE_NAME',
'INITIAL_EN',
'INIT_FILE_PATH'
],
'plugs' => {
'reset' => {
'0' => {
'name' => 'reset'
},
'type' => 'num',
'value' => 1,
'reset' => {}
},
'wb_slave' => {
'type' => 'num',
'0' => {
'name' => 'wb',
'addr' => '0x0000_0000 0x3fff_ffff RAM',
'width' => 'WB_Aw'
},
'wb_slave' => {},
'value' => 1
},
'clk' => {
'value' => 1,
'clk' => {},
'type' => 'num',
'0' => {
'name' => 'clk'
}
}
},
'hdl_files' => [
'/mpsoc/src_peripheral/ram/wb_single_port_ram.v',
'/mpsoc/src_peripheral/ram/generic_ram.v',
'/mpsoc/src_peripheral/ram/byte_enabled_generic_ram.sv',
'/mpsoc/src_peripheral/ram/wb_bram_ctrl.v'
],
'ip_name' => 'single_port_ram',
'ports_order' => [
'clk',
'reset',
'sa_dat_i',
'sa_sel_i',
'sa_addr_i',
'sa_tag_i',
'sa_cti_i',
'sa_bte_i',
'sa_stb_i',
'sa_cyc_i',
'sa_we_i',
'sa_dat_o',
'sa_ack_o',
'sa_err_o',
'sa_rty_o'
],
'module_name' => 'wb_single_port_ram',
'description' => 'Single port ram with wishbone bus interface.',
'file_name' => '/home/alireza/Mywork/mpsoc/src_peripheral/ram/wb_single_port_ram.v',
'category' => 'RAM'
}, 'ip_gen' );
Error running this command: diff -w -U 5 "/tmp/ELAclJ" ""
diff: : No such file or directory