Mon May 23 00:09:46 CEST 2005
Linux fizmo 2.4.26 #2 SMP Wed May 26 10:03:20 CEST 2004 i686 unknown
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... or32-unknown-uclinux-gnu
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for mawk... no
checking for gawk... gawk
checking whether make sets ${MAKE}... yes
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix... 
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for minix/config.h... no
checking whether make sets ${MAKE}... (cached) yes
checking whether gcc needs -traditional... no
checking for a BSD compatible install... /usr/bin/install -c
checking for ar... ar
checking for ranlib... ranlib
checking return type of signal handlers... void
checking whether stat file-mode macros are broken... no
checking for dirent.h that defines DIR... yes
checking for opendir in -ldir... no
checking for strcasecmp... yes
checking for select... yes
checking for setenv... yes
checking for putenv... yes
checking for tcgetattr... yes
checking for setlocale... yes
checking for lstat... yes
checking for strndup... yes
checking for grantpt... yes
checking for unlockpt... yes
checking for ptsname... yes
checking for on_exit... yes
checking for isblank... yes
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for working strcoll... yes
checking for unistd.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for varargs.h... yes
checking for stdarg.h... yes
checking for string.h... (cached) yes
checking for sys/ptem.h... no
checking for sys/pte.h... no
checking for sys/stream.h... no
checking for sys/stropts.h... yes
checking for sys/select.h... yes
checking for termcap.h... yes
checking for termios.h... yes
checking for termio.h... yes
checking for sys/file.h... yes
checking for locale.h... yes
checking for net/ethernet.h... yes
checking for sys/ethernet.h... no
checking for malloc.h... yes
checking for inttypes.h... (cached) yes
checking whether byte ordering is bigendian... no
checking for uint8_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for int8_t... yes
checking for int16_t... yes
checking for int32_t... yes
checking for char... yes
checking size of char... 1
checking for short... yes
checking size of short... 2
checking for int... yes
checking size of int... 4
checking for long... yes
checking size of long... 4
checking whether to enable profiling... no
checking whether to use simple execution... no
checking whether to enable ethernet phy emulation... no
checking whether to use raw range stats... no
checking whether instructions set overflow flag... no
checking whether arithmethic instructions set flag... no
checking for implementation-specific data... DEFAULT
configure: WARNING: using default environment
configure: creating ./config.status
config.status: creating Makefile
config.status: creating bpb/Makefile
config.status: creating cache/Makefile
config.status: creating cpu/Makefile
config.status: creating cpu/common/Makefile
config.status: creating cpu/or32/Makefile
config.status: creating cuc/Makefile
config.status: creating cpu/or1k/Makefile
config.status: creating cpu/dlx/Makefile
config.status: creating debug/Makefile
config.status: creating support/Makefile
config.status: creating mmu/Makefile
config.status: creating peripheral/Makefile
config.status: creating tick/Makefile
config.status: creating peripheral/channels/Makefile
config.status: creating pm/Makefile
config.status: creating pic/Makefile
config.status: creating vapi/Makefile
config.status: creating port/Makefile
config.status: creating config.h
cd ../or1ksim && /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run aclocal-1.6 
cd ../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  Makefile
cd ../or1ksim && /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run autoconf
configure.in:18: warning: AC_CANONICAL_HOST invoked multiple times
/bin/sh ./config.status --recheck
running /bin/sh ../or1ksim/configure  --target=or32-uclinux --prefix=/home/oc/testpool/or1k/or32-uclinux target_alias=or32-uclinux  --no-create --no-recursion
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... or32-unknown-uclinux-gnu
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for mawk... no
checking for gawk... gawk
checking whether make sets ${MAKE}... yes
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix... 
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for minix/config.h... no
checking whether make sets ${MAKE}... (cached) yes
checking whether gcc needs -traditional... no
checking for a BSD compatible install... /usr/bin/install -c
checking for ar... ar
checking for ranlib... ranlib
checking return type of signal handlers... void
checking whether stat file-mode macros are broken... no
checking for dirent.h that defines DIR... yes
checking for opendir in -ldir... no
checking for strcasecmp... yes
checking for select... yes
checking for setenv... yes
checking for putenv... yes
checking for tcgetattr... yes
checking for setlocale... yes
checking for lstat... yes
checking for strndup... yes
checking for grantpt... yes
checking for unlockpt... yes
checking for ptsname... yes
checking for on_exit... yes
checking for isblank... yes
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for working strcoll... yes
checking for unistd.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for varargs.h... yes
checking for stdarg.h... yes
checking for string.h... (cached) yes
checking for sys/ptem.h... no
checking for sys/pte.h... no
checking for sys/stream.h... no
checking for sys/stropts.h... yes
checking for sys/select.h... yes
checking for termcap.h... yes
checking for termios.h... yes
checking for termio.h... yes
checking for sys/file.h... yes
checking for locale.h... yes
checking for net/ethernet.h... yes
checking for sys/ethernet.h... no
checking for malloc.h... yes
checking for inttypes.h... (cached) yes
checking whether byte ordering is bigendian... no
checking for uint8_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for int8_t... yes
checking for int16_t... yes
checking for int32_t... yes
checking for char... yes
checking size of char... 1
checking for short... yes
checking size of short... 2
checking for int... yes
checking size of int... 4
checking for long... yes
checking size of long... 4
checking whether to enable profiling... no
checking which execution style to use... checking whether to enable ethernet phy emulation... no
checking whether to use raw range stats... no
checking whether instructions set overflow flag... no
checking whether arithmethic instructions set flag... no
checking for implementation-specific data... DEFAULT
configure: WARNING: using default environment
configure: creating ./config.status
cd . && /bin/sh ./config.status Makefile depfiles
config.status: creating Makefile
cd ../or1ksim && /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run autoheader
touch ../or1ksim/config.h.in
cd . && /bin/sh ./config.status config.h
config.status: creating config.h
/usr/bin/make  all-recursive
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim'
Making all in cpu
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu'
cd ../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  cpu/Makefile
cd .. && /bin/sh ./config.status cpu/Makefile 
config.status: creating cpu/Makefile
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu'
Making all in common
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu/common'
cd ../../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  cpu/common/Makefile
cd ../.. && /bin/sh ./config.status cpu/common/Makefile depfiles
config.status: creating cpu/common/Makefile
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu/common'
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu/common'
source='abstract.c' object='abstract.o' libtool=no \
depfile='.deps/abstract.Po' tmpdepfile='.deps/abstract.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/cpu/common -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'abstract.c' || echo '../../../or1ksim/cpu/common/'`abstract.c
abstract.c: In function `register_memoryarea_mask':
abstract.c:121: warning: suggest parentheses around && within ||
source='parse.c' object='parse.o' libtool=no \
depfile='.deps/parse.Po' tmpdepfile='.deps/parse.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/cpu/common -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'parse.c' || echo '../../../or1ksim/cpu/common/'`parse.c
parse.c: In function `readfile_elf':
parse.c:435: warning: `elf_phdata' might be used uninitialized in this function
source='stats.c' object='stats.o' libtool=no \
depfile='.deps/stats.Po' tmpdepfile='.deps/stats.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/cpu/common -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'stats.c' || echo '../../../or1ksim/cpu/common/'`stats.c
stats.c:60: warning: missing braces around initializer
stats.c:60: warning: (near initialization for `raw_stats.reg')
source='trace.c' object='trace.o' libtool=no \
depfile='.deps/trace.Po' tmpdepfile='.deps/trace.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/cpu/common -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'trace.c' || echo '../../../or1ksim/cpu/common/'`trace.c
source='labels.c' object='labels.o' libtool=no \
depfile='.deps/labels.Po' tmpdepfile='.deps/labels.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/cpu/common -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'labels.c' || echo '../../../or1ksim/cpu/common/'`labels.c
rm -f libcommon.a
ar cru libcommon.a abstract.o parse.o stats.o trace.o labels.o 
ranlib libcommon.a
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu/common'
Making all in or1k
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu/or1k'
cd ../../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  cpu/or1k/Makefile
cd ../.. && /bin/sh ./config.status cpu/or1k/Makefile depfiles
config.status: creating cpu/or1k/Makefile
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu/or1k'
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu/or1k'
source='sprs.c' object='sprs.o' libtool=no \
depfile='.deps/sprs.Po' tmpdepfile='.deps/sprs.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/cpu/or1k -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'sprs.c' || echo '../../../or1ksim/cpu/or1k/'`sprs.c
sprs.c: In function `mtspr':
sprs.c:188: warning: unsigned int format, sprword arg (arg 6)
source='except.c' object='except.o' libtool=no \
depfile='.deps/except.Po' tmpdepfile='.deps/except.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/cpu/or1k -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'except.c' || echo '../../../or1ksim/cpu/or1k/'`except.c
rm -f libor1k.a
ar cru libor1k.a sprs.o except.o 
ranlib libor1k.a
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu/or1k'
Making all in or32
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu/or32'
cd ../../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  cpu/or32/Makefile
cd ../.. && /bin/sh ./config.status cpu/or32/Makefile depfiles
config.status: creating cpu/or32/Makefile
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu/or32'
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu/or32'
source='or32.c' object='or32.o' libtool=no \
depfile='.deps/or32.Po' tmpdepfile='.deps/or32.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/cpu/or32 -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'or32.c' || echo '../../../or1ksim/cpu/or32/'`or32.c
or32.c: In function `cover_insn':
or32.c:800: warning: implicit declaration of function `debug'
source='generate.c' object='generate.o' libtool=no \
depfile='.deps/generate.Po' tmpdepfile='.deps/generate.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/cpu/or32 -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'generate.c' || echo '../../../or1ksim/cpu/or32/'`generate.c
gcc  -g -Wall -O2 -DOR32   -o generate  or32.o generate.o  
./generate ../../../or1ksim/cpu/or32/insnset.c execgen.c
Building automata... done, num uncovered: 0/212.
Parsing operands data... done.
/usr/bin/make  all-am
make[4]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu/or32'
source='execute.c' object='execute.o' libtool=no \
depfile='.deps/execute.Po' tmpdepfile='.deps/execute.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/cpu/or32 -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'execute.c' || echo '../../../or1ksim/cpu/or32/'`execute.c
In file included from execute.c:706:
execgen.c: In function `decode_execute':
execgen.c:161: warning: implicit declaration of function `simprintf'
rm -f libarch.a
ar cru libarch.a execute.o or32.o 
ranlib libarch.a
make[4]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu/or32'
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu/or32'
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu'
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu'
Making all in bpb
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/bpb'
cd ../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  bpb/Makefile
cd .. && /bin/sh ./config.status bpb/Makefile depfiles
config.status: creating bpb/Makefile
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/bpb'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/bpb'
source='branch_predict.c' object='branch_predict.o' libtool=no \
depfile='.deps/branch_predict.Po' tmpdepfile='.deps/branch_predict.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/bpb -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'branch_predict.c' || echo '../../or1ksim/bpb/'`branch_predict.c
rm -f libbpb.a
ar cru libbpb.a branch_predict.o 
ranlib libbpb.a
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/bpb'
Making all in support
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/support'
cd ../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  support/Makefile
cd .. && /bin/sh ./config.status support/Makefile depfiles
config.status: creating support/Makefile
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/support'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/support'
source='simprintf.c' object='simprintf.o' libtool=no \
depfile='.deps/simprintf.Po' tmpdepfile='.deps/simprintf.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/support -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'simprintf.c' || echo '../../or1ksim/support/'`simprintf.c
simprintf.c: In function `simprintf':
simprintf.c:110: warning: implicit declaration of function `evalsim_reg'
simprintf.c:118: warning: suggest parentheses around && within ||
source='dumpverilog.c' object='dumpverilog.o' libtool=no \
depfile='.deps/dumpverilog.Po' tmpdepfile='.deps/dumpverilog.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/support -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'dumpverilog.c' || echo '../../or1ksim/support/'`dumpverilog.c
source='profile.c' object='profile.o' libtool=no \
depfile='.deps/profile.Po' tmpdepfile='.deps/profile.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/support -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'profile.c' || echo '../../or1ksim/support/'`profile.c
source='sched.c' object='sched.o' libtool=no \
depfile='.deps/sched.Po' tmpdepfile='.deps/sched.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/support -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'sched.c' || echo '../../or1ksim/support/'`sched.c
sched.c:93:2: warning: #warning Scheduler should continue from previous cycles not current ones
source='debug.c' object='debug.o' libtool=no \
depfile='.deps/debug.Po' tmpdepfile='.deps/debug.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/support -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'debug.c' || echo '../../or1ksim/support/'`debug.c
debug.c: In function `parse_dbchs':
debug.c:78: warning: `dbcl' might be used uninitialized in this function
rm -f libsupport.a
ar cru libsupport.a simprintf.o dumpverilog.o profile.o sched.o debug.o 
ranlib libsupport.a
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/support'
Making all in cache
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/cache'
cd ../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  cache/Makefile
cd .. && /bin/sh ./config.status cache/Makefile depfiles
config.status: creating cache/Makefile
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cache'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/cache'
source='dcache_model.c' object='dcache_model.o' libtool=no \
depfile='.deps/dcache_model.Po' tmpdepfile='.deps/dcache_model.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/cache -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'dcache_model.c' || echo '../../or1ksim/cache/'`dcache_model.c
dcache_model.c: In function `dc_simulate_read':
dcache_model.c:87: warning: `tmp' might be used uninitialized in this function
dcache_model.c:182: warning: control reaches end of non-void function
dcache_model.c: In function `dc_nsets':
dcache_model.c:324: warning: implicit declaration of function `is_power2'
dcache_model.c:326: warning: implicit declaration of function `log2'
source='icache_model.c' object='icache_model.o' libtool=no \
depfile='.deps/icache_model.Po' tmpdepfile='.deps/icache_model.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/cache -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'icache_model.c' || echo '../../or1ksim/cache/'`icache_model.c
icache_model.c: In function `ic_nsets':
icache_model.c:203: warning: implicit declaration of function `is_power2'
icache_model.c:205: warning: implicit declaration of function `log2'
rm -f libcache.a
ar cru libcache.a dcache_model.o icache_model.o 
ranlib libcache.a
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cache'
Making all in mmu
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/mmu'
cd ../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  mmu/Makefile
cd .. && /bin/sh ./config.status mmu/Makefile depfiles
config.status: creating mmu/Makefile
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/mmu'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/mmu'
source='dmmu.c' object='dmmu.o' libtool=no \
depfile='.deps/dmmu.Po' tmpdepfile='.deps/dmmu.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/mmu -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'dmmu.c' || echo '../../or1ksim/mmu/'`dmmu.c
dmmu.c: In function `dmmu_simulate_tlb':
dmmu.c:91: warning: suggest parentheses around && within ||
dmmu.c:95: warning: suggest parentheses around && within ||
dmmu.c: In function `peek_into_dtlb':
dmmu.c:176: warning: suggest parentheses around && within ||
dmmu.c:182: warning: suggest parentheses around && within ||
dmmu.c: In function `dmmu_nsets':
dmmu.c:286: warning: implicit declaration of function `is_power2'
dmmu.c:288: warning: implicit declaration of function `log2'
source='immu.c' object='immu.o' libtool=no \
depfile='.deps/immu.Po' tmpdepfile='.deps/immu.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/mmu -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'immu.c' || echo '../../or1ksim/mmu/'`immu.c
immu.c:48: warning: static declaration for `immu_simulate_tlb' follows non-static
immu.c: In function `immu_nsets':
immu.c:263: warning: implicit declaration of function `is_power2'
immu.c:265: warning: implicit declaration of function `log2'
rm -f libmmu.a
ar cru libmmu.a dmmu.o immu.o 
ranlib libmmu.a
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/mmu'
Making all in peripheral
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/peripheral'
cd ../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  peripheral/Makefile
cd .. && /bin/sh ./config.status peripheral/Makefile depfiles
config.status: creating peripheral/Makefile
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/peripheral'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/peripheral'
Making all in channels
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/peripheral/channels'
cd ../../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  peripheral/channels/Makefile
cd ../.. && /bin/sh ./config.status peripheral/channels/Makefile depfiles
config.status: creating peripheral/channels/Makefile
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/peripheral/channels'
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/peripheral/channels'
source='channel.c' object='channel.o' libtool=no \
depfile='.deps/channel.Po' tmpdepfile='.deps/channel.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/peripheral/channels -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'channel.c' || echo '../../../or1ksim/peripheral/channels/'`channel.c
source='fd.c' object='fd.o' libtool=no \
depfile='.deps/fd.Po' tmpdepfile='.deps/fd.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/peripheral/channels -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'fd.c' || echo '../../../or1ksim/peripheral/channels/'`fd.c
source='file.c' object='file.o' libtool=no \
depfile='.deps/file.Po' tmpdepfile='.deps/file.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/peripheral/channels -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'file.c' || echo '../../../or1ksim/peripheral/channels/'`file.c
source='generic.c' object='generic.o' libtool=no \
depfile='.deps/generic.Po' tmpdepfile='.deps/generic.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/peripheral/channels -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'generic.c' || echo '../../../or1ksim/peripheral/channels/'`generic.c
source='xterm.c' object='xterm.o' libtool=no \
depfile='.deps/xterm.Po' tmpdepfile='.deps/xterm.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/peripheral/channels -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'xterm.c' || echo '../../../or1ksim/peripheral/channels/'`xterm.c
xterm.c:102: warning: `xterm_exit' defined but not used
source='tcp.c' object='tcp.o' libtool=no \
depfile='.deps/tcp.Po' tmpdepfile='.deps/tcp.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/peripheral/channels -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'tcp.c' || echo '../../../or1ksim/peripheral/channels/'`tcp.c
source='tty.c' object='tty.o' libtool=no \
depfile='.deps/tty.Po' tmpdepfile='.deps/tty.TPo' \
depmode=gcc3 /bin/sh ../../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../../or1ksim/peripheral/channels -I../.. -I../../cpu/or32 -I../../../or1ksim -I../../../or1ksim/cpu/common -I../../../or1ksim/cpu/or1k -I../../../or1ksim/cache -I../../../or1ksim/mmu -I../../../or1ksim/bpb -I../../../or1ksim/peripheral -I../../../or1ksim/tick -I../../../or1ksim/peripheral/channels -I../../../or1ksim/pm -I../../../or1ksim/pic -I../../../or1ksim/debug -I../../../or1ksim/vapi -I../../../or1ksim/support -I../../../or1ksim/cuc -I../../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'tty.c' || echo '../../../or1ksim/peripheral/channels/'`tty.c
tty.c: In function `tty_init':
tty.c:78: warning: `fd' might be used uninitialized in this function
tty.c: At top level:
tty.c:172: warning: `tty_read' defined but not used
tty.c:177: warning: `tty_write' defined but not used
rm -f libchannels.a
ar cru libchannels.a channel.o fd.o file.o generic.o xterm.o tcp.o tty.o 
ranlib libchannels.a
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/peripheral/channels'
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/peripheral'
source='16450.c' object='16450.o' libtool=no \
depfile='.deps/16450.Po' tmpdepfile='.deps/16450.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/peripheral -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f '16450.c' || echo '../../or1ksim/peripheral/'`16450.c
source='dma.c' object='dma.o' libtool=no \
depfile='.deps/dma.Po' tmpdepfile='.deps/dma.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/peripheral -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'dma.c' || echo '../../or1ksim/peripheral/'`dma.c
source='mc.c' object='mc.o' libtool=no \
depfile='.deps/mc.Po' tmpdepfile='.deps/mc.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/peripheral -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'mc.c' || echo '../../or1ksim/peripheral/'`mc.c
source='eth.c' object='eth.o' libtool=no \
depfile='.deps/eth.Po' tmpdepfile='.deps/eth.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/peripheral -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'eth.c' || echo '../../or1ksim/peripheral/'`eth.c
eth.c:460: warning: `eth_rewind_rx_file' defined but not used
source='crc32.c' object='crc32.o' libtool=no \
depfile='.deps/crc32.Po' tmpdepfile='.deps/crc32.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/peripheral -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'crc32.c' || echo '../../or1ksim/peripheral/'`crc32.c
source='gpio.c' object='gpio.o' libtool=no \
depfile='.deps/gpio.Po' tmpdepfile='.deps/gpio.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/peripheral -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'gpio.c' || echo '../../or1ksim/peripheral/'`gpio.c
source='vga.c' object='vga.o' libtool=no \
depfile='.deps/vga.Po' tmpdepfile='.deps/vga.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/peripheral -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'vga.c' || echo '../../or1ksim/peripheral/'`vga.c
vga.c: In function `vga_dump_image':
vga.c:142: warning: `x' might be used uninitialized in this function
vga.c:142: warning: `y' might be used uninitialized in this function
source='fb.c' object='fb.o' libtool=no \
depfile='.deps/fb.Po' tmpdepfile='.deps/fb.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/peripheral -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'fb.c' || echo '../../or1ksim/peripheral/'`fb.c
fb.c: In function `fb_read32':
fb.c:91: warning: suggest parentheses around arithmetic in operand of |
fb.c: In function `fb_dump_image8':
fb.c:126: warning: `x' might be used uninitialized in this function
fb.c:126: warning: `y' might be used uninitialized in this function
fb.c: In function `fb_dump_image24':
fb.c:204: warning: `x' might be used uninitialized in this function
fb.c:204: warning: `y' might be used uninitialized in this function
source='ps2kbd.c' object='ps2kbd.o' libtool=no \
depfile='.deps/ps2kbd.Po' tmpdepfile='.deps/ps2kbd.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/peripheral -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'ps2kbd.c' || echo '../../or1ksim/peripheral/'`ps2kbd.c
ps2kbd.c: In function `kbd_read8':
ps2kbd.c:191: warning: `rc' might be used uninitialized in this function
ps2kbd.c: In function `kbd_sec_end':
ps2kbd.c:352: warning: assignment from incompatible pointer type
ps2kbd.c:353: warning: assignment from incompatible pointer type
source='atahost.c' object='atahost.o' libtool=no \
depfile='.deps/atahost.Po' tmpdepfile='.deps/atahost.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/peripheral -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'atahost.c' || echo '../../or1ksim/peripheral/'`atahost.c
atahost.c: In function `ata_read32':
atahost.c:131: warning: control reaches end of non-void function
source='atadevice.c' object='atadevice.o' libtool=no \
depfile='.deps/atadevice.Po' tmpdepfile='.deps/atadevice.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/peripheral -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'atadevice.c' || echo '../../or1ksim/peripheral/'`atadevice.c
atadevice.c: In function `ata_devices_read':
atadevice.c:454: warning: control reaches end of non-void function
source='atadevice_cmdi.c' object='atadevice_cmdi.o' libtool=no \
depfile='.deps/atadevice_cmdi.Po' tmpdepfile='.deps/atadevice_cmdi.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/peripheral -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'atadevice_cmdi.c' || echo '../../or1ksim/peripheral/'`atadevice_cmdi.c
source='memory.c' object='memory.o' libtool=no \
depfile='.deps/memory.Po' tmpdepfile='.deps/memory.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/peripheral -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'memory.c' || echo '../../or1ksim/peripheral/'`memory.c
memory.c: In function `simmem_read8':
memory.c:71: warning: suggest parentheses around + or - in operand of &
memory.c: In function `simmem_write8':
memory.c:86: warning: suggest parentheses around + or - in operand of &
memory.c: In function `memory_sec_end':
memory.c:335: warning: implicit declaration of function `mc_reg_mem_area'
rm -f libperipheral.a
ar cru libperipheral.a 16450.o dma.o mc.o eth.o crc32.o gpio.o vga.o fb.o ps2kbd.o atahost.o atadevice.o atadevice_cmdi.o memory.o 
ranlib libperipheral.a
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/peripheral'
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/peripheral'
Making all in tick
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/tick'
cd ../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  tick/Makefile
cd .. && /bin/sh ./config.status tick/Makefile depfiles
config.status: creating tick/Makefile
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/tick'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/tick'
source='tick.c' object='tick.o' libtool=no \
depfile='.deps/tick.Po' tmpdepfile='.deps/tick.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/tick -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'tick.c' || echo '../../or1ksim/tick/'`tick.c
rm -f libtick.a
ar cru libtick.a tick.o 
ranlib libtick.a
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/tick'
Making all in pm
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/pm'
cd ../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  pm/Makefile
cd .. && /bin/sh ./config.status pm/Makefile depfiles
config.status: creating pm/Makefile
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/pm'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/pm'
source='pm.c' object='pm.o' libtool=no \
depfile='.deps/pm.Po' tmpdepfile='.deps/pm.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/pm -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'pm.c' || echo '../../or1ksim/pm/'`pm.c
rm -f libpm.a
ar cru libpm.a pm.o 
ranlib libpm.a
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/pm'
Making all in pic
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/pic'
cd ../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  pic/Makefile
cd .. && /bin/sh ./config.status pic/Makefile depfiles
config.status: creating pic/Makefile
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/pic'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/pic'
source='pic.c' object='pic.o' libtool=no \
depfile='.deps/pic.Po' tmpdepfile='.deps/pic.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/pic -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'pic.c' || echo '../../or1ksim/pic/'`pic.c
rm -f libpic.a
ar cru libpic.a pic.o 
ranlib libpic.a
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/pic'
Making all in debug
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/debug'
cd ../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  debug/Makefile
cd .. && /bin/sh ./config.status debug/Makefile depfiles
config.status: creating debug/Makefile
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/debug'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/debug'
source='debug_unit.c' object='debug_unit.o' libtool=no \
depfile='.deps/debug_unit.Po' tmpdepfile='.deps/debug_unit.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/debug -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'debug_unit.c' || echo '../../or1ksim/debug/'`debug_unit.c
debug_unit.c: In function `DebugGetRegister':
debug_unit.c:233: warning: unsigned int format, long unsigned int arg (arg 4)
debug_unit.c:248: warning: enumeration value `JTAG_CHAIN_GLOBAL' not handled in switch
debug_unit.c:248: warning: enumeration value `JTAG_CHAIN_TEST' not handled in switch
debug_unit.c:248: warning: enumeration value `JTAG_CHAIN_BLOCK1' not handled in switch
debug_unit.c:248: warning: enumeration value `JTAG_CHAIN_BLOCK2' not handled in switch
debug_unit.c:248: warning: enumeration value `JTAG_CHAIN_OPTIONAL0' not handled in switch
debug_unit.c:248: warning: enumeration value `JTAG_CHAIN_OPTIONAL1' not handled in switch
debug_unit.c:248: warning: enumeration value `JTAG_CHAIN_OPTIONAL2' not handled in switch
debug_unit.c:248: warning: enumeration value `JTAG_CHAIN_OPTIONAL3' not handled in switch
debug_unit.c:248: warning: enumeration value `JTAG_CHAIN_OPTIONAL4' not handled in switch
debug_unit.c:248: warning: enumeration value `JTAG_CHAIN_OPTIONAL5' not handled in switch
debug_unit.c:248: warning: enumeration value `JTAG_CHAIN_OPTIONAL6' not handled in switch
debug_unit.c:248: warning: enumeration value `JTAG_CHAIN_OPTIONAL7' not handled in switch
debug_unit.c: In function `DebugSetRegister':
debug_unit.c:282: warning: enumeration value `JTAG_CHAIN_GLOBAL' not handled in switch
debug_unit.c:282: warning: enumeration value `JTAG_CHAIN_TEST' not handled in switch
debug_unit.c:282: warning: enumeration value `JTAG_CHAIN_BLOCK1' not handled in switch
debug_unit.c:282: warning: enumeration value `JTAG_CHAIN_BLOCK2' not handled in switch
debug_unit.c:282: warning: enumeration value `JTAG_CHAIN_OPTIONAL0' not handled in switch
debug_unit.c:282: warning: enumeration value `JTAG_CHAIN_OPTIONAL1' not handled in switch
debug_unit.c:282: warning: enumeration value `JTAG_CHAIN_OPTIONAL2' not handled in switch
debug_unit.c:282: warning: enumeration value `JTAG_CHAIN_OPTIONAL3' not handled in switch
debug_unit.c:282: warning: enumeration value `JTAG_CHAIN_OPTIONAL4' not handled in switch
debug_unit.c:282: warning: enumeration value `JTAG_CHAIN_OPTIONAL5' not handled in switch
debug_unit.c:282: warning: enumeration value `JTAG_CHAIN_OPTIONAL6' not handled in switch
debug_unit.c:282: warning: enumeration value `JTAG_CHAIN_OPTIONAL7' not handled in switch
source='gdbcomm.c' object='gdbcomm.o' libtool=no \
depfile='.deps/gdbcomm.Po' tmpdepfile='.deps/gdbcomm.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/debug -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'gdbcomm.c' || echo '../../or1ksim/debug/'`gdbcomm.c
gdbcomm.c: In function `HandleServerSocket':
gdbcomm.c:230: warning: suggest parentheses around && within ||
gdbcomm.c: In function `GDBRequest':
gdbcomm.c:417: warning: passing arg 2 of `DebugGetRegister' from incompatible pointer type
gdbcomm.c:510: warning: passing arg 2 of `DebugGetRegister' from incompatible pointer type
gdbcomm.c: In function `ProtocolClean':
gdbcomm.c:574: warning: suggest parentheses around && within ||
gdbcomm.c: In function `gdbcomm_init':
gdbcomm.c:670: warning: control reaches end of non-void function
rm -f libdebug.a
ar cru libdebug.a debug_unit.o gdbcomm.o 
ranlib libdebug.a
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/debug'
Making all in vapi
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/vapi'
cd ../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  vapi/Makefile
cd .. && /bin/sh ./config.status vapi/Makefile depfiles
config.status: creating vapi/Makefile
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/vapi'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/vapi'
source='vapi.c' object='vapi.o' libtool=no \
depfile='.deps/vapi.Po' tmpdepfile='.deps/vapi.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/vapi -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'vapi.c' || echo '../../or1ksim/vapi/'`vapi.c
vapi.c: In function `vapi_install_multi_handler':
vapi.c:553: warning: flag `0' used with type `p'
rm -f libvapi.a
ar cru libvapi.a vapi.o 
ranlib libvapi.a
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/vapi'
Making all in cuc
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/cuc'
cd ../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  cuc/Makefile
cd .. && /bin/sh ./config.status cuc/Makefile depfiles
config.status: creating cuc/Makefile
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cuc'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/cuc'
source='cuc.c' object='cuc.o' libtool=no \
depfile='.deps/cuc.Po' tmpdepfile='.deps/cuc.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/cuc -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'cuc.c' || echo '../../or1ksim/cuc/'`cuc.c
cuc.c: In function `set_func_deps':
cuc.c:509: warning: `c' might be used uninitialized in this function
cuc.c: In function `main_cuc':
cuc.c:571: warning: `j' might be used uninitialized in this function
source='load.c' object='load.o' libtool=no \
depfile='.deps/load.Po' tmpdepfile='.deps/load.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/cuc -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'load.c' || echo '../../or1ksim/cuc/'`load.c
load.c: In function `cuc_load':
load.c:497: warning: suggest parentheses around && within ||
source='bb.c' object='bb.o' libtool=no \
depfile='.deps/bb.Po' tmpdepfile='.deps/bb.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/cuc -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'bb.c' || echo '../../or1ksim/cuc/'`bb.c
bb.c:1222:2: warning: #warning TODO: do not count interrupts
bb.c: In function `cpy_bb':
bb.c:110: warning: control reaches end of non-void function
bb.c: In function `cuc_check':
bb.c:375: warning: suggest parentheses around && within ||
bb.c:375: warning: suggest parentheses around && within ||
bb.c:355: warning: `j' might be used uninitialized in this function
bb.c:355: warning: `k' might be used uninitialized in this function
bb.c: In function `join_bb':
bb.c:486: warning: `cond_op' might be used uninitialized in this function
bb.c:486: warning: `cond_opt' might be used uninitialized in this function
bb.c: In function `reg_dep_rec':
bb.c:923: warning: `return' with no value, in function returning non-void
bb.c:941: warning: control reaches end of non-void function
bb.c: In function `reg_dep':
bb.c:992: warning: suggest parentheses around comparison in operand of |
bb.c:964: warning: `minb' might be used uninitialized in this function
source='memory.c' object='memory.o' libtool=no \
depfile='.deps/memory.Po' tmpdepfile='.deps/memory.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/cuc -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'memory.c' || echo '../../or1ksim/cuc/'`memory.c
source='verilog.c' object='verilog.o' libtool=no \
depfile='.deps/verilog.Po' tmpdepfile='.deps/verilog.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/cuc -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'verilog.c' || echo '../../or1ksim/cuc/'`verilog.c
verilog.c: In function `find_lsc_index':
verilog.c:59: warning: suggest parentheses around && within ||
verilog.c: In function `print_insn_v':
verilog.c:127: warning: format argument is not a pointer (arg 3)
verilog.c:127: warning: too few arguments for format
verilog.c: In function `output_verilog':
verilog.c:597: warning: suggest parentheses around && within ||
verilog.c:597: warning: suggest parentheses around && within ||
verilog.c:616: warning: suggest parentheses around && within ||
verilog.c:616: warning: suggest parentheses around && within ||
verilog.c:587: warning: `c' might be used uninitialized in this function
verilog.c:588: warning: `s' might be used uninitialized in this function
verilog.c: In function `generate_main':
verilog.c:805: warning: too few arguments for format
verilog.c:977: warning: too many arguments for format
verilog.c:1021: warning: too few arguments for format
verilog.c:1022: warning: too few arguments for format
verilog.c: At top level:
verilog.c:176: warning: `bin_str' defined but not used
source='timings.c' object='timings.o' libtool=no \
depfile='.deps/timings.Po' tmpdepfile='.deps/timings.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/cuc -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'timings.c' || echo '../../or1ksim/cuc/'`timings.c
timings.c: In function `load_timing_table':
timings.c:276: warning: `index' might be used uninitialized in this function
source='insn.c' object='insn.o' libtool=no \
depfile='.deps/insn.Po' tmpdepfile='.deps/insn.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/cuc -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'insn.c' || echo '../../or1ksim/cuc/'`insn.c
insn.c:1414:2: warning: #warning some code here (2)
insn.c: In function `optimize_tree':
insn.c:766: warning: `value' might be used uninitialized in this function
insn.c: In function `remove_dead':
insn.c:918: warning: suggest parentheses around && within ||
insn.c: In function `add_latches':
insn.c:1003: warning: implicit declaration of function `expand_bb'
insn.c: At top level:
insn.c:981: warning: `relocate_bb' defined but not used
source='adv.c' object='adv.o' libtool=no \
depfile='.deps/adv.Po' tmpdepfile='.deps/adv.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/cuc -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'adv.c' || echo '../../or1ksim/cuc/'`adv.c
rm -f libcuc.a
ar cru libcuc.a cuc.o load.o bb.o memory.o verilog.o timings.o insn.o adv.o 
ranlib libcuc.a
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cuc'
Making all in port
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/port'
cd ../../or1ksim && \
  /bin/sh /home/oc/testpool/or1k/or1ksim/missing --run automake-1.6 --gnu  port/Makefile
cd .. && /bin/sh ./config.status port/Makefile depfiles
config.status: creating port/Makefile
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/port'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/port'
source='strndup.c' object='strndup.o' libtool=no \
depfile='.deps/strndup.Po' tmpdepfile='.deps/strndup.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/port -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'strndup.c' || echo '../../or1ksim/port/'`strndup.c
source='isblank.c' object='isblank.o' libtool=no \
depfile='.deps/isblank.Po' tmpdepfile='.deps/isblank.TPo' \
depmode=gcc3 /bin/sh ../../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../../or1ksim/port -I.. -I../cpu/or32 -I../../or1ksim -I../../or1ksim/cpu/common -I../../or1ksim/cpu/or1k -I../../or1ksim/cache -I../../or1ksim/mmu -I../../or1ksim/bpb -I../../or1ksim/peripheral -I../../or1ksim/tick -I../../or1ksim/peripheral/channels -I../../or1ksim/pm -I../../or1ksim/pic -I../../or1ksim/debug -I../../or1ksim/vapi -I../../or1ksim/support -I../../or1ksim/cuc -I../../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'isblank.c' || echo '../../or1ksim/port/'`isblank.c
rm -f libport.a
ar cru libport.a strndup.o isblank.o 
ranlib libport.a
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/port'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim'
source='toplevel.c' object='toplevel.o' libtool=no \
depfile='.deps/toplevel.Po' tmpdepfile='.deps/toplevel.TPo' \
depmode=gcc3 /bin/sh ../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../or1ksim -I. -I./cpu/or32 -I../or1ksim -I../or1ksim/cpu/common -I../or1ksim/cpu/or1k -I../or1ksim/cache -I../or1ksim/mmu -I../or1ksim/bpb -I../or1ksim/peripheral -I../or1ksim/tick -I../or1ksim/peripheral/channels -I../or1ksim/pm -I../or1ksim/pic -I../or1ksim/debug -I../or1ksim/vapi -I../or1ksim/support -I../or1ksim/cuc -I../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'toplevel.c' || echo '../or1ksim/'`toplevel.c
toplevel.c: In function `main':
toplevel.c:367: warning: implicit declaration of function `reg_config_secs'
source='sim-config.c' object='sim-config.o' libtool=no \
depfile='.deps/sim-config.Po' tmpdepfile='.deps/sim-config.TPo' \
depmode=gcc3 /bin/sh ../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../or1ksim -I. -I./cpu/or32 -I../or1ksim -I../or1ksim/cpu/common -I../or1ksim/cpu/or1k -I../or1ksim/cache -I../or1ksim/mmu -I../or1ksim/bpb -I../or1ksim/peripheral -I../or1ksim/tick -I../or1ksim/peripheral/channels -I../or1ksim/pm -I../or1ksim/pic -I../or1ksim/debug -I../or1ksim/vapi -I../or1ksim/support -I../or1ksim/cuc -I../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'sim-config.c' || echo '../or1ksim/'`sim-config.c
sim-config.c: In function `init_defconfig':
sim-config.c:66: warning: unused variable `i'
sim-config.c: In function `parse_args':
sim-config.c:212: warning: implicit declaration of function `version'
sim-config.c: In function `read_script_file':
sim-config.c:655: warning: suggest parentheses around && within ||
source='profiler.c' object='profiler.o' libtool=no \
depfile='.deps/profiler.Po' tmpdepfile='.deps/profiler.TPo' \
depmode=gcc3 /bin/sh ../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../or1ksim -I. -I./cpu/or32 -I../or1ksim -I../or1ksim/cpu/common -I../or1ksim/cpu/or1k -I../or1ksim/cache -I../or1ksim/mmu -I../or1ksim/bpb -I../or1ksim/peripheral -I../or1ksim/tick -I../or1ksim/peripheral/channels -I../or1ksim/pm -I../or1ksim/pic -I../or1ksim/debug -I../or1ksim/vapi -I../or1ksim/support -I../or1ksim/cuc -I../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'profiler.c' || echo '../or1ksim/'`profiler.c
source='mprofiler.c' object='mprofiler.o' libtool=no \
depfile='.deps/mprofiler.Po' tmpdepfile='.deps/mprofiler.TPo' \
depmode=gcc3 /bin/sh ../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../or1ksim -I. -I./cpu/or32 -I../or1ksim -I../or1ksim/cpu/common -I../or1ksim/cpu/or1k -I../or1ksim/cache -I../or1ksim/mmu -I../or1ksim/bpb -I../or1ksim/peripheral -I../or1ksim/tick -I../or1ksim/peripheral/channels -I../or1ksim/pm -I../or1ksim/pic -I../or1ksim/debug -I../or1ksim/vapi -I../or1ksim/support -I../or1ksim/cuc -I../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'mprofiler.c' || echo '../or1ksim/'`mprofiler.c
source='sim-cmd.c' object='sim-cmd.o' libtool=no \
depfile='.deps/sim-cmd.Po' tmpdepfile='.deps/sim-cmd.TPo' \
depmode=gcc3 /bin/sh ../or1ksim/depcomp \
gcc -DHAVE_CONFIG_H -I. -I../or1ksim -I. -I./cpu/or32 -I../or1ksim -I../or1ksim/cpu/common -I../or1ksim/cpu/or1k -I../or1ksim/cache -I../or1ksim/mmu -I../or1ksim/bpb -I../or1ksim/peripheral -I../or1ksim/tick -I../or1ksim/peripheral/channels -I../or1ksim/pm -I../or1ksim/pic -I../or1ksim/debug -I../or1ksim/vapi -I../or1ksim/support -I../or1ksim/cuc -I../or1ksim/port    -g -Wall -O2 -DOR32 -c `test -f 'sim-cmd.c' || echo '../or1ksim/'`sim-cmd.c
gcc  -g -Wall -O2 -DOR32   -o sim -lm  toplevel.o sim-config.o profiler.o mprofiler.o sim-cmd.o cpu/common/libcommon.a cpu/or32/libarch.a cpu/or1k/libor1k.a support/libsupport.a mmu/libmmu.a bpb/libbpb.a cache/libcache.a peripheral/libperipheral.a peripheral/channels/libchannels.a tick/libtick.a pm/libpm.a pic/libpic.a debug/libdebug.a vapi/libvapi.a cuc/libcuc.a port/libport.a 
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim'
Making install in cpu
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu'
Making install in common
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu/common'
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu/common'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu/common'
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu/common'
Making install in or1k
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu/or1k'
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu/or1k'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu/or1k'
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu/or1k'
Making install in or32
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu/or32'
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu/or32'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu/or32'
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu/or32'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu'
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/cpu'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu'
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cpu'
Making install in bpb
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim/bpb'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/bpb'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/bpb'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim/bpb'
Making install in support
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim/support'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/support'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/support'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim/support'
Making install in cache
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim/cache'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/cache'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cache'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cache'
Making install in mmu
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim/mmu'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/mmu'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/mmu'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim/mmu'
Making install in peripheral
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim/peripheral'
Making install in channels
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/peripheral/channels'
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/peripheral/channels'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/peripheral/channels'
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/peripheral/channels'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/peripheral'
make[3]: Entering directory `/home/oc/testpool/or1k/or1ksim/peripheral'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/oc/testpool/or1k/or1ksim/peripheral'
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/peripheral'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim/peripheral'
Making install in tick
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim/tick'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/tick'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/tick'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim/tick'
Making install in pm
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim/pm'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/pm'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/pm'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim/pm'
Making install in pic
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim/pic'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/pic'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/pic'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim/pic'
Making install in debug
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim/debug'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/debug'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/debug'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim/debug'
Making install in vapi
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim/vapi'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/vapi'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/vapi'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim/vapi'
Making install in cuc
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim/cuc'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/cuc'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cuc'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim/cuc'
Making install in port
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim/port'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim/port'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim/port'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim/port'
make[1]: Entering directory `/home/oc/testpool/or1k/or1ksim'
make[2]: Entering directory `/home/oc/testpool/or1k/or1ksim'
/bin/sh ../or1ksim/mkinstalldirs /home/oc/testpool/or1k/or32-uclinux/bin
  /usr/bin/install -c sim /home/oc/testpool/or1k/or32-uclinux/bin/or32-uclinux-sim
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/oc/testpool/or1k/or1ksim'
make[1]: Leaving directory `/home/oc/testpool/or1k/or1ksim'