OpenCores
URL https://opencores.org/ocsvn/nand_controller/nand_controller/trunk

Subversion Repositories nand_controller

[/] [nand_controller/] - Rev 19

Rev

Filtering Options

Clear current filter

Rev Log message Author Age Path
19 Fixed r/w trigger in direct operations pradd 2856d 12h /nand_controller/
18 Fixed r/w trigger in direct operations pradd 2856d 12h /nand_controller/
17 Fixed documentation pradd 2856d 22h /nand_controller/
16 Added bypass commands to the controller's interface pradd 2856d 22h /nand_controller/
15 Added Avalon Memory Mapped slave interface pradd 3142d 00h /nand_controller/
14 Fixed READ_PAGE initial delay bug. Now the first byte is the first byte, not 0 :-) pradd 3142d 00h /nand_controller/
13 Fixed delay handling in M_NAND_READ_PARAM_PAGE pradd 3142d 21h /nand_controller/
12 Minor changes to nand_master.vhd and onfi_package.vhd.
Added documentation.
pradd 3161d 21h /nand_controller/
11 Changed io_unit data_reg assignment timing.

Added testbench.vhd.
pradd 3165d 00h /nand_controller/
10 Minor fixes. pradd 3165d 20h /nand_controller/
9 Submission of actually working code :-) pradd 3166d 03h /nand_controller/
8 Initial check in of nand_ctrl.vhd - this file implements the "system side" interface of the NAND
flash controller.
pradd 3254d 22h /nand_controller/
7 Added a note on clock_cycle generic signal pradd 3255d 01h /nand_controller/
6 Initial check in of 'NAND_STUFF' package. pradd 3255d 21h /nand_controller/
5 Added physical connection table for 'nand_io' bits/pins pradd 3255d 21h /nand_controller/
4 Added some explanation regarding x8 and x16 NAND devices pinout and the way
data input/output is organized in the module.
pradd 3255d 21h /nand_controller/
3 Added CE2# - Chip Enable for second die on 8Gbit x8 devices
Added is_x16 input - indicates whether the NAND being used is x8 or x16 device
Added die_select input - selects active die (on 8GBit devices only)

Fixed nand_io[15..0] pin mux to properly support x16 devices
pradd 3255d 22h /nand_controller/
2 Initial check-in:
nand_interface.vhd - contains implementation of simplistic NAND Flash interface. Although,
the module may be used as a standalone "controller", it is suggested to use the whole package.
pradd 3256d 01h /nand_controller/
1 The project and the structure was created root 3256d 12h /nand_controller/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.