OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-stable/] [binutils-2.20.1/] [include/] [xregex2.h] - Blame information for rev 822

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 205 julius
/* Definitions for data structures and routines for the regular
2
   expression library, version 0.12.
3
 
4
   Copyright (C) 1985, 1989, 1990, 1991, 1992, 1993, 1995, 1996, 1997,
5
   1998, 2000, 2005 Free Software Foundation, Inc.
6
 
7
   This file is part of the GNU C Library.  Its master source is NOT part of
8
   the C library, however.  The master source lives in /gd/gnu/lib.
9
 
10
   The GNU C Library is free software; you can redistribute it and/or
11
   modify it under the terms of the GNU Lesser General Public
12
   License as published by the Free Software Foundation; either
13
   version 2.1 of the License, or (at your option) any later version.
14
 
15
   The GNU C Library is distributed in the hope that it will be useful,
16
   but WITHOUT ANY WARRANTY; without even the implied warranty of
17
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18
   Lesser General Public License for more details.
19
 
20
   You should have received a copy of the GNU Lesser General Public
21
   License along with the GNU C Library; if not, write to the Free
22
   Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
23
   02110-1301 USA.  */
24
 
25
#ifndef _REGEX_H
26
#define _REGEX_H 1
27
 
28
/* Allow the use in C++ code.  */
29
#ifdef __cplusplus
30
extern "C" {
31
#endif
32
 
33
/* POSIX says that <sys/types.h> must be included (by the caller) before
34
   <regex.h>.  */
35
 
36
#if !defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE && defined VMS
37
/* VMS doesn't have `size_t' in <sys/types.h>, even though POSIX says it
38
   should be there.  */
39
# include <stddef.h>
40
#endif
41
 
42
/* The following two types have to be signed and unsigned integer type
43
   wide enough to hold a value of a pointer.  For most ANSI compilers
44
   ptrdiff_t and size_t should be likely OK.  Still size of these two
45
   types is 2 for Microsoft C.  Ugh... */
46
typedef long int s_reg_t;
47
typedef unsigned long int active_reg_t;
48
 
49
/* The following bits are used to determine the regexp syntax we
50
   recognize.  The set/not-set meanings are chosen so that Emacs syntax
51
   remains the value 0.  The bits are given in alphabetical order, and
52
   the definitions shifted by one from the previous bit; thus, when we
53
   add or remove a bit, only one other definition need change.  */
54
typedef unsigned long int reg_syntax_t;
55
 
56
/* If this bit is not set, then \ inside a bracket expression is literal.
57
   If set, then such a \ quotes the following character.  */
58
#define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1)
59
 
60
/* If this bit is not set, then + and ? are operators, and \+ and \? are
61
     literals.
62
   If set, then \+ and \? are operators and + and ? are literals.  */
63
#define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1)
64
 
65
/* If this bit is set, then character classes are supported.  They are:
66
     [:alpha:], [:upper:], [:lower:],  [:digit:], [:alnum:], [:xdigit:],
67
     [:space:], [:print:], [:punct:], [:graph:], and [:cntrl:].
68
   If not set, then character classes are not supported.  */
69
#define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1)
70
 
71
/* If this bit is set, then ^ and $ are always anchors (outside bracket
72
     expressions, of course).
73
   If this bit is not set, then it depends:
74
        ^  is an anchor if it is at the beginning of a regular
75
           expression or after an open-group or an alternation operator;
76
        $  is an anchor if it is at the end of a regular expression, or
77
           before a close-group or an alternation operator.
78
 
79
   This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because
80
   POSIX draft 11.2 says that * etc. in leading positions is undefined.
81
   We already implemented a previous draft which made those constructs
82
   invalid, though, so we haven't changed the code back.  */
83
#define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1)
84
 
85
/* If this bit is set, then special characters are always special
86
     regardless of where they are in the pattern.
87
   If this bit is not set, then special characters are special only in
88
     some contexts; otherwise they are ordinary.  Specifically,
89
     * + ? and intervals are only special when not after the beginning,
90
     open-group, or alternation operator.  */
91
#define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1)
92
 
93
/* If this bit is set, then *, +, ?, and { cannot be first in an re or
94
     immediately after an alternation or begin-group operator.  */
95
#define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1)
96
 
97
/* If this bit is set, then . matches newline.
98
   If not set, then it doesn't.  */
99
#define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1)
100
 
101
/* If this bit is set, then . doesn't match NUL.
102
   If not set, then it does.  */
103
#define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1)
104
 
105
/* If this bit is set, nonmatching lists [^...] do not match newline.
106
   If not set, they do.  */
107
#define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1)
108
 
109
/* If this bit is set, either \{...\} or {...} defines an
110
     interval, depending on RE_NO_BK_BRACES.
111
   If not set, \{, \}, {, and } are literals.  */
112
#define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1)
113
 
114
/* If this bit is set, +, ? and | aren't recognized as operators.
115
   If not set, they are.  */
116
#define RE_LIMITED_OPS (RE_INTERVALS << 1)
117
 
118
/* If this bit is set, newline is an alternation operator.
119
   If not set, newline is literal.  */
120
#define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1)
121
 
122
/* If this bit is set, then `{...}' defines an interval, and \{ and \}
123
     are literals.
124
  If not set, then `\{...\}' defines an interval.  */
125
#define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1)
126
 
127
/* If this bit is set, (...) defines a group, and \( and \) are literals.
128
   If not set, \(...\) defines a group, and ( and ) are literals.  */
129
#define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1)
130
 
131
/* If this bit is set, then \<digit> matches <digit>.
132
   If not set, then \<digit> is a back-reference.  */
133
#define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1)
134
 
135
/* If this bit is set, then | is an alternation operator, and \| is literal.
136
   If not set, then \| is an alternation operator, and | is literal.  */
137
#define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1)
138
 
139
/* If this bit is set, then an ending range point collating higher
140
     than the starting range point, as in [z-a], is invalid.
141
   If not set, then when ending range point collates higher than the
142
     starting range point, the range is ignored.  */
143
#define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1)
144
 
145
/* If this bit is set, then an unmatched ) is ordinary.
146
   If not set, then an unmatched ) is invalid.  */
147
#define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1)
148
 
149
/* If this bit is set, succeed as soon as we match the whole pattern,
150
   without further backtracking.  */
151
#define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1)
152
 
153
/* If this bit is set, do not process the GNU regex operators.
154
   If not set, then the GNU regex operators are recognized. */
155
#define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1)
156
 
157
/* If this bit is set, turn on internal regex debugging.
158
   If not set, and debugging was on, turn it off.
159
   This only works if regex.c is compiled -DDEBUG.
160
   We define this bit always, so that all that's needed to turn on
161
   debugging is to recompile regex.c; the calling code can always have
162
   this bit set, and it won't affect anything in the normal case. */
163
#define RE_DEBUG (RE_NO_GNU_OPS << 1)
164
 
165
/* If this bit is set, a syntactically invalid interval is treated as
166
   a string of ordinary characters.  For example, the ERE 'a{1' is
167
   treated as 'a\{1'.  */
168
#define RE_INVALID_INTERVAL_ORD (RE_DEBUG << 1)
169
 
170
/* This global variable defines the particular regexp syntax to use (for
171
   some interfaces).  When a regexp is compiled, the syntax used is
172
   stored in the pattern buffer, so changing this does not affect
173
   already-compiled regexps.  */
174
extern reg_syntax_t re_syntax_options;
175
 
176
/* Define combinations of the above bits for the standard possibilities.
177
   (The [[[ comments delimit what gets put into the Texinfo file, so
178
   don't delete them!)  */
179
/* [[[begin syntaxes]]] */
180
#define RE_SYNTAX_EMACS 0
181
 
182
#define RE_SYNTAX_AWK                                                   \
183
  (RE_BACKSLASH_ESCAPE_IN_LISTS   | RE_DOT_NOT_NULL                     \
184
   | RE_NO_BK_PARENS              | RE_NO_BK_REFS                       \
185
   | RE_NO_BK_VBAR                | RE_NO_EMPTY_RANGES                  \
186
   | RE_DOT_NEWLINE               | RE_CONTEXT_INDEP_ANCHORS            \
187
   | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS)
188
 
189
#define RE_SYNTAX_GNU_AWK                                               \
190
  ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG) \
191
   & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS))
192
 
193
#define RE_SYNTAX_POSIX_AWK                                             \
194
  (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS              \
195
   | RE_INTERVALS           | RE_NO_GNU_OPS)
196
 
197
#define RE_SYNTAX_GREP                                                  \
198
  (RE_BK_PLUS_QM              | RE_CHAR_CLASSES                         \
199
   | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS                            \
200
   | RE_NEWLINE_ALT)
201
 
202
#define RE_SYNTAX_EGREP                                                 \
203
  (RE_CHAR_CLASSES        | RE_CONTEXT_INDEP_ANCHORS                    \
204
   | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE                    \
205
   | RE_NEWLINE_ALT       | RE_NO_BK_PARENS                             \
206
   | RE_NO_BK_VBAR)
207
 
208
#define RE_SYNTAX_POSIX_EGREP                                           \
209
  (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES                     \
210
   | RE_INVALID_INTERVAL_ORD)
211
 
212
/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff.  */
213
#define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC
214
 
215
#define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC
216
 
217
/* Syntax bits common to both basic and extended POSIX regex syntax.  */
218
#define _RE_SYNTAX_POSIX_COMMON                                         \
219
  (RE_CHAR_CLASSES | RE_DOT_NEWLINE      | RE_DOT_NOT_NULL              \
220
   | RE_INTERVALS  | RE_NO_EMPTY_RANGES)
221
 
222
#define RE_SYNTAX_POSIX_BASIC                                           \
223
  (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM)
224
 
225
/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes
226
   RE_LIMITED_OPS, i.e., \? \+ \| are not recognized.  Actually, this
227
   isn't minimal, since other operators, such as \`, aren't disabled.  */
228
#define RE_SYNTAX_POSIX_MINIMAL_BASIC                                   \
229
  (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS)
230
 
231
#define RE_SYNTAX_POSIX_EXTENDED                                        \
232
  (_RE_SYNTAX_POSIX_COMMON  | RE_CONTEXT_INDEP_ANCHORS                  \
233
   | RE_CONTEXT_INDEP_OPS   | RE_NO_BK_BRACES                           \
234
   | RE_NO_BK_PARENS        | RE_NO_BK_VBAR                             \
235
   | RE_CONTEXT_INVALID_OPS | RE_UNMATCHED_RIGHT_PAREN_ORD)
236
 
237
/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INDEP_OPS is
238
   removed and RE_NO_BK_REFS is added.  */
239
#define RE_SYNTAX_POSIX_MINIMAL_EXTENDED                                \
240
  (_RE_SYNTAX_POSIX_COMMON  | RE_CONTEXT_INDEP_ANCHORS                  \
241
   | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES                           \
242
   | RE_NO_BK_PARENS        | RE_NO_BK_REFS                             \
243
   | RE_NO_BK_VBAR          | RE_UNMATCHED_RIGHT_PAREN_ORD)
244
/* [[[end syntaxes]]] */
245
 
246
/* Maximum number of duplicates an interval can allow.  Some systems
247
   (erroneously) define this in other header files, but we want our
248
   value, so remove any previous define.  */
249
#ifdef RE_DUP_MAX
250
# undef RE_DUP_MAX
251
#endif
252
/* If sizeof(int) == 2, then ((1 << 15) - 1) overflows.  */
253
#define RE_DUP_MAX (0x7fff)
254
 
255
 
256
/* POSIX `cflags' bits (i.e., information for `regcomp').  */
257
 
258
/* If this bit is set, then use extended regular expression syntax.
259
   If not set, then use basic regular expression syntax.  */
260
#define REG_EXTENDED 1
261
 
262
/* If this bit is set, then ignore case when matching.
263
   If not set, then case is significant.  */
264
#define REG_ICASE (REG_EXTENDED << 1)
265
 
266
/* If this bit is set, then anchors do not match at newline
267
     characters in the string.
268
   If not set, then anchors do match at newlines.  */
269
#define REG_NEWLINE (REG_ICASE << 1)
270
 
271
/* If this bit is set, then report only success or fail in regexec.
272
   If not set, then returns differ between not matching and errors.  */
273
#define REG_NOSUB (REG_NEWLINE << 1)
274
 
275
 
276
/* POSIX `eflags' bits (i.e., information for regexec).  */
277
 
278
/* If this bit is set, then the beginning-of-line operator doesn't match
279
     the beginning of the string (presumably because it's not the
280
     beginning of a line).
281
   If not set, then the beginning-of-line operator does match the
282
     beginning of the string.  */
283
#define REG_NOTBOL 1
284
 
285
/* Like REG_NOTBOL, except for the end-of-line.  */
286
#define REG_NOTEOL (1 << 1)
287
 
288
 
289
/* If any error codes are removed, changed, or added, update the
290
   `re_error_msg' table in regex.c.  */
291
typedef enum
292
{
293
#ifdef _XOPEN_SOURCE
294
  REG_ENOSYS = -1,      /* This will never happen for this implementation.  */
295
#endif
296
 
297
  REG_NOERROR = 0,       /* Success.  */
298
  REG_NOMATCH,          /* Didn't find a match (for regexec).  */
299
 
300
  /* POSIX regcomp return error codes.  (In the order listed in the
301
     standard.)  */
302
  REG_BADPAT,           /* Invalid pattern.  */
303
  REG_ECOLLATE,         /* Not implemented.  */
304
  REG_ECTYPE,           /* Invalid character class name.  */
305
  REG_EESCAPE,          /* Trailing backslash.  */
306
  REG_ESUBREG,          /* Invalid back reference.  */
307
  REG_EBRACK,           /* Unmatched left bracket.  */
308
  REG_EPAREN,           /* Parenthesis imbalance.  */
309
  REG_EBRACE,           /* Unmatched \{.  */
310
  REG_BADBR,            /* Invalid contents of \{\}.  */
311
  REG_ERANGE,           /* Invalid range end.  */
312
  REG_ESPACE,           /* Ran out of memory.  */
313
  REG_BADRPT,           /* No preceding re for repetition op.  */
314
 
315
  /* Error codes we've added.  */
316
  REG_EEND,             /* Premature end.  */
317
  REG_ESIZE,            /* Compiled pattern bigger than 2^16 bytes.  */
318
  REG_ERPAREN           /* Unmatched ) or \); not returned from regcomp.  */
319
} reg_errcode_t;
320
 
321
/* This data structure represents a compiled pattern.  Before calling
322
   the pattern compiler, the fields `buffer', `allocated', `fastmap',
323
   `translate', and `no_sub' can be set.  After the pattern has been
324
   compiled, the `re_nsub' field is available.  All other fields are
325
   private to the regex routines.  */
326
 
327
#ifndef RE_TRANSLATE_TYPE
328
# define RE_TRANSLATE_TYPE char *
329
#endif
330
 
331
struct re_pattern_buffer
332
{
333
/* [[[begin pattern_buffer]]] */
334
        /* Space that holds the compiled pattern.  It is declared as
335
          `unsigned char *' because its elements are
336
           sometimes used as array indexes.  */
337
  unsigned char *buffer;
338
 
339
        /* Number of bytes to which `buffer' points.  */
340
  unsigned long int allocated;
341
 
342
        /* Number of bytes actually used in `buffer'.  */
343
  unsigned long int used;
344
 
345
        /* Syntax setting with which the pattern was compiled.  */
346
  reg_syntax_t syntax;
347
 
348
        /* Pointer to a fastmap, if any, otherwise zero.  re_search uses
349
           the fastmap, if there is one, to skip over impossible
350
           starting points for matches.  */
351
  char *fastmap;
352
 
353
        /* Either a translate table to apply to all characters before
354
           comparing them, or zero for no translation.  The translation
355
           is applied to a pattern when it is compiled and to a string
356
           when it is matched.  */
357
  RE_TRANSLATE_TYPE translate;
358
 
359
        /* Number of subexpressions found by the compiler.  */
360
  size_t re_nsub;
361
 
362
        /* Zero if this pattern cannot match the empty string, one else.
363
           Well, in truth it's used only in `re_search_2', to see
364
           whether or not we should use the fastmap, so we don't set
365
           this absolutely perfectly; see `re_compile_fastmap' (the
366
           `duplicate' case).  */
367
  unsigned can_be_null : 1;
368
 
369
        /* If REGS_UNALLOCATED, allocate space in the `regs' structure
370
             for `max (RE_NREGS, re_nsub + 1)' groups.
371
           If REGS_REALLOCATE, reallocate space if necessary.
372
           If REGS_FIXED, use what's there.  */
373
#define REGS_UNALLOCATED 0
374
#define REGS_REALLOCATE 1
375
#define REGS_FIXED 2
376
  unsigned regs_allocated : 2;
377
 
378
        /* Set to zero when `regex_compile' compiles a pattern; set to one
379
           by `re_compile_fastmap' if it updates the fastmap.  */
380
  unsigned fastmap_accurate : 1;
381
 
382
        /* If set, `re_match_2' does not return information about
383
           subexpressions.  */
384
  unsigned no_sub : 1;
385
 
386
        /* If set, a beginning-of-line anchor doesn't match at the
387
           beginning of the string.  */
388
  unsigned not_bol : 1;
389
 
390
        /* Similarly for an end-of-line anchor.  */
391
  unsigned not_eol : 1;
392
 
393
        /* If true, an anchor at a newline matches.  */
394
  unsigned newline_anchor : 1;
395
 
396
/* [[[end pattern_buffer]]] */
397
};
398
 
399
typedef struct re_pattern_buffer regex_t;
400
 
401
/* Type for byte offsets within the string.  POSIX mandates this.  */
402
typedef int regoff_t;
403
 
404
 
405
/* This is the structure we store register match data in.  See
406
   regex.texinfo for a full description of what registers match.  */
407
struct re_registers
408
{
409
  unsigned num_regs;
410
  regoff_t *start;
411
  regoff_t *end;
412
};
413
 
414
 
415
/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer,
416
   `re_match_2' returns information about at least this many registers
417
   the first time a `regs' structure is passed.  */
418
#ifndef RE_NREGS
419
# define RE_NREGS 30
420
#endif
421
 
422
 
423
/* POSIX specification for registers.  Aside from the different names than
424
   `re_registers', POSIX uses an array of structures, instead of a
425
   structure of arrays.  */
426
typedef struct
427
{
428
  regoff_t rm_so;  /* Byte offset from string's start to substring's start.  */
429
  regoff_t rm_eo;  /* Byte offset from string's start to substring's end.  */
430
} regmatch_t;
431
 
432
/* Declarations for routines.  */
433
 
434
/* To avoid duplicating every routine declaration -- once with a
435
   prototype (if we are ANSI), and once without (if we aren't) -- we
436
   use the following macro to declare argument types.  This
437
   unfortunately clutters up the declarations a bit, but I think it's
438
   worth it.  */
439
 
440
/* Sets the current default syntax to SYNTAX, and return the old syntax.
441
   You can also simply assign to the `re_syntax_options' variable.  */
442
extern reg_syntax_t re_set_syntax (reg_syntax_t syntax);
443
 
444
/* Compile the regular expression PATTERN, with length LENGTH
445
   and syntax given by the global `re_syntax_options', into the buffer
446
   BUFFER.  Return NULL if successful, and an error string if not.  */
447
extern const char *re_compile_pattern (const char *pattern, size_t length,
448
                                       struct re_pattern_buffer *buffer);
449
 
450
 
451
/* Compile a fastmap for the compiled pattern in BUFFER; used to
452
   accelerate searches.  Return 0 if successful and -2 if was an
453
   internal error.  */
454
extern int re_compile_fastmap (struct re_pattern_buffer *buffer);
455
 
456
 
457
/* Search in the string STRING (with length LENGTH) for the pattern
458
   compiled into BUFFER.  Start searching at position START, for RANGE
459
   characters.  Return the starting position of the match, -1 for no
460
   match, or -2 for an internal error.  Also return register
461
   information in REGS (if REGS and BUFFER->no_sub are nonzero).  */
462
extern int re_search (struct re_pattern_buffer *buffer, const char *string,
463
                      int length, int start, int range,
464
                      struct re_registers *regs);
465
 
466
 
467
/* Like `re_search', but search in the concatenation of STRING1 and
468
   STRING2.  Also, stop searching at index START + STOP.  */
469
extern int re_search_2 (struct re_pattern_buffer *buffer, const char *string1,
470
                        int length1, const char *string2, int length2,
471
                        int start, int range, struct re_registers *regs,
472
                        int stop);
473
 
474
 
475
/* Like `re_search', but return how many characters in STRING the regexp
476
   in BUFFER matched, starting at position START.  */
477
extern int re_match (struct re_pattern_buffer *buffer, const char *string,
478
                     int length, int start, struct re_registers *regs);
479
 
480
 
481
/* Relates to `re_match' as `re_search_2' relates to `re_search'.  */
482
extern int re_match_2 (struct re_pattern_buffer *buffer, const char *string1,
483
                       int length1, const char *string2, int length2,
484
                       int start, struct re_registers *regs, int stop);
485
 
486
 
487
/* Set REGS to hold NUM_REGS registers, storing them in STARTS and
488
   ENDS.  Subsequent matches using BUFFER and REGS will use this memory
489
   for recording register information.  STARTS and ENDS must be
490
   allocated with malloc, and must each be at least `NUM_REGS * sizeof
491
   (regoff_t)' bytes long.
492
 
493
   If NUM_REGS == 0, then subsequent matches should allocate their own
494
   register data.
495
 
496
   Unless this function is called, the first search or match using
497
   PATTERN_BUFFER will allocate its own register data, without
498
   freeing the old data.  */
499
extern void re_set_registers (struct re_pattern_buffer *buffer,
500
                              struct re_registers *regs,
501
                              unsigned num_regs, regoff_t *starts,
502
                              regoff_t *ends);
503
 
504
#if defined _REGEX_RE_COMP || defined _LIBC
505
# ifndef _CRAY
506
/* 4.2 bsd compatibility.  */
507
extern char *re_comp (const char *);
508
extern int re_exec (const char *);
509
# endif
510
#endif
511
 
512
/* GCC 2.95 and later have "__restrict"; C99 compilers have
513
   "restrict", and "configure" may have defined "restrict".  */
514
#ifndef __restrict
515
# if ! (2 < __GNUC__ || (2 == __GNUC__ && 95 <= __GNUC_MINOR__))
516
#  if defined restrict || 199901L <= __STDC_VERSION__
517
#   define __restrict restrict
518
#  else
519
#   define __restrict
520
#  endif
521
# endif
522
#endif
523
 
524
/* GCC 3.1 and later support declaring arrays as non-overlapping
525
   using the syntax array_name[restrict]  */
526
#ifndef __restrict_arr
527
# if ! (3 < __GNUC__ || (3 == __GNUC__ && 1 <= __GNUC_MINOR__)) || defined (__GNUG__)
528
#  define __restrict_arr
529
# else
530
#  define __restrict_arr __restrict
531
# endif
532
#endif
533
 
534
/* POSIX compatibility.  */
535
extern int regcomp (regex_t *__restrict __preg,
536
                    const char *__restrict __pattern,
537
                    int __cflags);
538
 
539
#if (__GNUC__)
540
__extension__
541
#endif
542
extern int regexec (const regex_t *__restrict __preg,
543
                    const char *__restrict __string, size_t __nmatch,
544
                    regmatch_t __pmatch[__restrict_arr],
545
                    int __eflags);
546
 
547
extern size_t regerror (int __errcode, const regex_t *__preg,
548
                        char *__errbuf, size_t __errbuf_size);
549
 
550
extern void regfree (regex_t *__preg);
551
 
552
 
553
#ifdef __cplusplus
554
}
555
#endif  /* C++ */
556
 
557
#endif /* regex.h */
558
 
559
/*
560
Local variables:
561
make-backup-files: t
562
version-control: t
563
trim-versions-without-asking: nil
564
End:
565
*/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.