Subversion Repositories openrisc

# ====================================================================

#

#      flexanet_eth_drivers.cdl

#

#      Ethernet drivers - support for LAN91CXX ethernet controller

#      on the BSE Flexanet/SA1110 board.

#

# ====================================================================

#####ECOSGPLCOPYRIGHTBEGIN####

## -------------------------------------------

## This file is part of eCos, the Embedded Configurable Operating System.

## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

##

## eCos is free software; you can redistribute it and/or modify it under

## the terms of the GNU General Public License as published by the Free

## Software Foundation; either version 2 or (at your option) any later version.

##

## eCos is distributed in the hope that it will be useful, but WITHOUT ANY

## WARRANTY; without even the implied warranty of MERCHANTABILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License along

## with eCos; if not, write to the Free Software Foundation, Inc.,

## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

##

## As a special exception, if other files instantiate templates or use macros

## or inline functions from this file, or you compile this file and link it

## with other works to produce a work based on this file, this file does not

## by itself cause the resulting work to be covered by the GNU General Public

## License. However the source code for this file must still be made available

## in accordance with section (3) of the GNU General Public License.

##

## This exception does not invalidate any other reasons why a work based on

## this file might be covered by the GNU General Public License.

##

## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

## at http://sources.redhat.com/ecos/ecos-license/

## -------------------------------------------

#####ECOSGPLCOPYRIGHTEND####

# ====================================================================

######DESCRIPTIONBEGIN####

#

# Author(s):      Jordi Colomer 

# Contributors:   Jordi Colomer

# Date:           2001-06-18

#

#####DESCRIPTIONEND####

#

# ====================================================================

cdl_package CYGPKG_DEVS_ETH_ARM_FLEXANET {

    display       "Flexanet SMC91C96 ethernet driver"

    parent        CYGPKG_IO_ETH_DRIVERS

    active_if     CYGPKG_IO_ETH_DRIVERS

    active_if     CYGPKG_HAL_ARM_SA11X0_FLEXANET

    # chip wired in PCMCIA, 16-bit mode, no EEPROM

    implements    CYGHWR_NET_DRIVERS

    implements    CYGHWR_NET_DRIVER_ETH0

    implements    CYGINT_DEVS_ETH_SMSC_LAN91CXX_REQUIRED

    implements    CYGINT_DEVS_ETH_SMSC_LAN91CXX_PCMCIA_MODE

    implements    CYGINT_DEVS_ETH_SMSC_LAN91CXX_STATIC_ESA

    requires      CYGPKG_DEVS_ETH_SMSC_LAN91CXX

    description   "Ethernet driver for Flexanet boards."

    include_dir   cyg/io

    compile       if_flexanet.c

    define_proc {

        puts $::cdl_system_header "/***** ethernet driver proc output start *****/"

        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_SMSC_LAN91CXX_INL "

        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_SMSC_LAN91CXX_CFG "

        puts $::cdl_system_header "/*****  ethernet driver proc output end  *****/"

    }

    # Arguably this should do in the generic package

    # but then there is a logic loop so you can never enable it.

    cdl_interface CYGINT_DEVS_ETH_SMSC_LAN91CXX_REQUIRED {

        display   "SMSC LAN91CXX driver required"

    }

    cdl_option CYGDAT_DEVS_ETH_ARM_FLEXANET_NAME {

        display       "Device name for the ethernet driver"

        flavor        data

        default_value {"\"eth0\""}

        description   "

            This option sets the name of the ethernet device for the

            ethernet port."

    }

    cdl_option CYGDAT_DEVS_ETH_ARM_FLEXANET_ESA {

        display       "The ethernet station address (MAC)"

        flavor        data

        default_value {"{0x12, 0x13, 0x14, 0x15, 0x16, 0x17}"}

        description   "A static ethernet station address.

            Caution: Booting two systems with the same MAC on the same

            network, will cause severe conflicts."

        active_if     !CYGSEM_DEVS_ETH_ARM_FLEXANET_REDBOOT_ESA

    }

    cdl_option CYGSEM_DEVS_ETH_ARM_FLEXANET_REDBOOT_ESA {

        display "Use the RedBoot ESA (MAC address)"

        default_value 0

        flavor        bool

        description   "

            Use the ESA that is stored as a RedBoot variable instead of

            a static ESA."

    }

}

# EOF flexanet_eth_drivers.cdl