Subversion Repositories openrisc

2003-02-24  Jonathan Larmour  

        * cdl/ser_mips_vrc437x.cdl: Remove irrelevant doc link.

2001-09-18  Nick Garnett  

        * cdl/ser_mips_vrc437x.cdl:

        * src/vrc437x_serial.h:

        * src/vrc437x_serial.c:

        Fixed VRC4373 -> VRC437X conversions that were missed.

        Also made default baud rates 38400 rather than 9600.

2001-09-10  Jonathan Larmour  

        * cdl/ser_mips_vrc437x.cdl:

        Fix 234000->230400 typo.

2001-09-07  Nick Garnett  

        * cdl/ser_mips_vrc437x.cdl:

        * src/vrc437x_serial.h:

        * src/vrc437x_serial.c:

        Moved this entire tree over to vrc437x from vrc4373 to make it

        generic to both kinds of board.

2000-10-12  Jesper Skov  

        * cdl/ser_mips_vrc4373.cdl: Moved testing parameters here.

2000-08-01  Jonathan Larmour  

        * src/vrc4373_serial.c (vrc4373_serial_set_config): Now use keys

        to make more flexible.

2000-07-22  Jonathan Larmour  

        * src/vrc4373_serial.c (vrc4373_serial_init): Add comment about broken

        interrupt handling

2000-06-22  Hugo Tyson  

        * cdl/.cdl: Remove the comment on the empty

        include_files directive; the tools now support this correctly.

        This keeps internal include files internal.

2000-04-11  Hugo Tyson  

        * cdl/ser_mips_vrc4373.cdl: Change the parent from CYGPKG_IO_SERIAL

        (which is enabled most of the time) to CYGPKG_IO_SERIAL_DEVICES

        (which is not...) thus allowing convenient control independent of

        platform.  Also enable all individual devices by default, now, so

        that they can be enabled simply by enabling the above new parent.

2000-04-07  Hugo Tyson  

        * ecos.db: Re-organize device packages.  This is a massive change

        involving deleting all the sources for serial and ethernet drivers

        from where they used to live in

            packages/io/serial/current/src/ARCH/PLATFORM.[ch]

            packages/net/drivers/eth/PLATFORM/current/src/...

        and reinstating them in

            packages/devs/serial/ARCH/PLATFORM/current/src/...

            packages/devs/eth/ARCH/PLATFORM/current/src/...

        All these new packages are properly defined in ecos.db, and are

        all of type "hardware" so that a "target" can grab them.

        This directory layout is descriptive of the devices we have right

        now, arch and platform are separate levels just to make it easier

        to navigate in the filesystem and similar to the HAL structure in

        the filesystem.

        It is *not* prescriptive of future work; for example, the mythical

        common highly-portable 16550 serial driver which works on many

        targets would be called "devs/serial/s16550/current", or a serial

        device for a particular board (cogent springs to mind) that can

        work with different CPUs fitted is "devs/serial/cogent/current".

        Changelogs have been preserved and replicated over all the new

        packages, so that no history is lost.

        The contents of individual source files are unchanged; they build

        in just the same emvironment except for a very few cases where the

        config file name changed in this movement.

        Targets in ecos.db have been redefined to bring in all relevant

        hardware packages including net and serial drivers (but the newly

        included packages are only active if their desired parent is

        available.)

        The names of CDL options (and their #defines of course) stay the

        same for the serial drivers, for backward compatibility.

        * templates/*/current.ect: these have had CYGPKG_IO_SERIAL added

        rather than it being in (almost) all target definitions.

2000-04-05  Jonathan Larmour  

        * src/common/tty.c (tty_read): CRLF conversion should use \r\n not \n\r

        (tty_write): Similarly

        * include/ttyio.h: Update CYG_TTY_IN_FLAGS_CRLF and

        CYG_TTY_IN_FLAGS_CRLF to match

2000-03-31  Jesper Skov  

        * cdl/ser_sh_edk7708.cdl: Limit legal baud rate range.

        * src/sh/sh_sci_serial.c: Use baud rate macro instead of hardwired

        constants.

2000-03-28  John Dallaway  

        * cdl/io_serial.cdl,

          cdl/ser_arm_aeb.cdl,

          cdl/ser_arm_cma230.cdl,

          cdl/ser_arm_edb7xxx.cdl,

          cdl/ser_arm_pid.cdl,

          cdl/ser_i386_pc.cdl,

          cdl/ser_mips_jmr3904.cdl,

          cdl/ser_mips_vrc4373.cdl,

          cdl/ser_mn10300.cdl,

          cdl/ser_powerpc_cogent.cdl,

          cdl/ser_quicc_smc.cdl,

          cdl/ser_sh_edk7708.cdl,

          cdl/ser_sparclite_sleb.cdl,

          cdl/tty.cdl:

        Adjust documentation URLs.

2000-03-07  Jesper Skov  

        * cdl/ser_mips_jmr3904.cdl: Rename devices to match CDL naming.

2000-02-29  Jonathan Larmour  

        * include/serialio.h: Correct baud rate typo: 230400 rather than

        234000. Thanks to Grant Edwards for the report.

2000-02-28  Gary Thomas  

        * src/powerpc/quicc_smc_serial.c: Use standard 'diag_dump_buf()'.

2000-02-28  Jesper Skov  

        * tests/ser_test_protocol.inl: Allow 115200 baud on Cogent

        again. Fixed interrupt problem.

2000-02-22  Jesper Skov  

        * tests/ser_test_protocol.inl: Don't use 115200 baud on

        Cogent. Our slower boards can't keep up.

2000-02-17  Gary Thomas  

        * cdl/ser_powerpc_cogent.cdl: Fix incorrect dependency.

2000-02-16  Nick Garnett  

        * include/pkgconf/io_serial.h:

        Added configury for PC serial device drivers.

        * cdl/ser_i386_pc.cdl:

        * src/i386/pc_serial.c:

        * src/i386/pc_serial.h:

        Added these files to implement PC serial line drivers.

        * cdl/io_serial.cdl:

        Added CYGPKG_IO_SERIAL_I386_PC.

        * tests/ser_test_protocol.inl:

        Added support for PC serial line testing.

2000-02-11  Jesper Skov  

        * src/sh/sh_sci_7708.inl (DEVTAB_ENTRY):

        * src/sparclite/sleb_sdtr.c:

        serial_devio => cyg_io_serial_devio

2000-02-10  Jonathan Larmour  

        * src/mn10300/mn10300_serial.c: Ensure all CYG_HAL_MN10300_*

        preprocessor conditionals use the correct CYGPKG_HAL_MN10300_AM3* form

        now.

2000-02-03  Jesper Skov  

        * src/powerpc/quicc_smc_serial.c: CYG_HAL_POWERPC_x->CYGPKG_...

2000-02-02  Jonathan Larmour  

        * src/arm/aeb_serial.h: Rename lower case register macros to REG_ upper

        case macros

        * src/arm/aeb_serial.c: Update to reflect above

2000-01-31 Simon FitzMaurice  

  * cdl/*.cdl:

  Adjust help URLs in line with new doc layout.

2000-01-28 Simon FitzMaurice  

  * cdl/*.cdl:

  Adjust help URLs in line with new doc layout.

2000-01-28  Gary Thomas  

        * src/common/tty.c (tty_read): Fix problem with backspace at start

        of line (size must be 'signed' for compare to work).

2000-01-19  Hugo Tyson  

        * cdl/*.cdl: Add descriptions to a number of options &c which were

        lacking same, also tidied up other typos as noticed en passant.

2000-01-17  Gary Thomas  

        * src/common/tty.c (tty_read): Avoid echoing "backspace/erase" at

        start of line.

2000-01-05  Gary Thomas  

        * src/common/serial.c (serial_write): Avoid potential deadlock if

        transmit start actually sends enough characters to signal cond wait.

2000-01-03  Gary Thomas  

        * include/serial.h: Fix namespace pollution -

        serial_devio => cyg_io_serial_devio

        serial_callbacks => cyg_io_serial_callbacks

        * src/mips/tx3904_serial.c:

        * src/mips/vrc4373_serial.c:

        * src/mn10300/mn10300_serial.c:

        * src/powerpc/quicc_smc_serial.c:

        * src/powerpc/cogent_serial_with_ints.c:

        * src/sparclite/sleb_sdtr.c:

        * src/arm/aeb_serial.c:

        * src/arm/pid_serial_with_ints.c:

        * src/arm/edb7xxx_serial.c:

        * src/arm/cma230_serial.c:

        * src/arm/ebsa285_serial.c:

        * src/common/haldiag.c:

        * src/common/serial.c: Fix namespace pollution -

        serial_devio => cyg_io_serial_devio

1999-12-06  Gary Thomas  

        * src/arm/pid_serial_with_ints.c (pid_serial_DSR): Add loop to handle

        case where an interrupt represents multiple events.

1999-11-19  Gary Thomas  

        * src/powerpc/quicc_smc_serial.c: Channel select for SMC2 was wrong.

1999-11-18  Gary Thomas  

        * include/pkgconf/io_serial.h: Remove mention of 7209/7212.

1999-11-03  John Dallaway  

        * cdl/io_serial.cdl: Define build options.

1999-10-26  Jesper Skov  

        * tests/serial5.c (serial_test): Reduce speed in thumb mode.

        * src/arm/pid_serial.h: Added BE support.

        * src/PKGconf.mak: Use CYGPKG_<> instead of CYG_<> to control what

        needs to be compiled.

1999-10-25  Gary Thomas  

        * src/arm/pid_serial.h (ISR_RxTO): Define - character received but

        not handled "promptly".

        * src/arm/pid_serial_with_ints.c (pid_serial_DSR): Handle rcv interrupts

        properly (can't ignore them even with TO bit set).

        * src/arm/cl7211_serial.c (cl7211_serial_rx_DSR): Need to handle all

        input (empty input FIFO) otherwise characters get dropped.

1999-10-15  Jesper Skov  

        * tests/ser_test_protocol.inl: Removed AEB rev C change. Was bogus.

1999-10-11  Nick Garnett  

        * tests/ser_test_protocol.inl: Added configury for VR4300 testing.

        * src/mips/vrc4373_serial.c: Added Bi-endian support.

        * include/pkgconf/io_serial.h: Adjusted default baud rates to

        38400.

1999-10-06  Jesper Skov  

        * tests/ser_test_protocol.inl: Run tests on AEB rev C as well.

1999-09-28  Hugo Tyson  

        * src/powerpc/quicc_smc_serial.c (quicc_smc_serial_init): Correct

        value supplied for interrupt priority - it may be unused, but it

        is asserted for range.  Initialize the diagnostic channel if on an

        MBX and if NOT using SMC1 ourselves, to ensure that diag output

        and built-in stubs work correctly; otherwise reset the quicc and

        ignore SMC1 as before.  Fix various warnings, mostly about

        casting/arg-passing/assigning away volatile.

1999-08-31  Jesper Skov  

        * tests/ser_test_protocol.inl: Define dummy crash ID.

1999-08-30  Jesper Skov  

        * tests/ser_test_protocol.inl: Added crash information which

        should help track down repeating errors.

1999-08-20  Jesper Skov  

        * tests/README: Added.

1999-08-18  Jesper Skov  

        * tests/tty1.c:

        * tests/tty2.c:

        * tests/serial1.c:

        * tests/serial2.c:

        * tests/serial3.c:

        * tests/serial4.c:

        * tests/serial5.c:

        * tests/PKGconf.mak:

        Require kernel and kernel C API.

1999-08-17  Nick Garnett  

        * src/mn10300/mn10300_serial.c: Added a simple implementation of a

        receive FIFO to try and reduce the overhead of receiving bytes.

1999-08-16  Jonathan Larmour  

        * src/PKGconf.mak:

        * src/mn10300/mn10300_serial.c:

        * tests/ser_test_protocol.inl:

        Rename all am32 -> am31

1999-08-12  Nick Garnett  

        Imported following changes from development branch:

    1999-08-11  Nick Garnett  

        * tests/serial5.c: Modified config test for boards that need a lower

        speed for this test.

        * tests/ser_test_protocol.inl: Removed 14400 baud tests for all

        MN10300 variants. The MN10300 cannot currently do this speed.

        * src/mn10300/mn10300_serial.c: Tidied up the transmit interrupt

        enable/disable code to be variant specific.

        * include/pkgconf/io_serial.h: Undid Jonathan's change, since the

        same options are used for all MN10300 variants.

    1999-08-10  Jonathan Larmour  

        * include/pkgconf/io_serial.h:

        Reparent CYGPKG_IO_SERIAL_MN10300 from under CYGPKG_HAL_MN10300 to

        CYGPKG_HAL_MN10300_AM32_STDEVAL1 since it's stdeval1 specific

    1999-08-04  Nick Garnett  

        * tests/ser_test_protocol.inl:

        Changed names of MN10300 defines tested. Added AM33 definitions.

        * src/mn10300/mn10300_serial.c:

        Modified driver to work on am33 too. This simply requires some

        alternate definitions of things like register addresses and some

        bits in them plus some extra parameterization of some register

        values.

        * src/PKGconf.mak:

        Added am33 to list of architectures supporting serial lines.

1999-07-28  Gary Thomas  

        * include/pkgconf/io_serial.h: Update descriptions to be more

        generic (CL7x11 instead of CL7211).

1999-07-28  Jonathan Larmour  

        * include/pkgconf/io_serial.h: Correct typos in CDL description

        for serial port 2 driver

1999-07-26  Hugo Tyson  

        * src/arm/ebsa285_serial.c: New file: device driver for the serial

        device of the Intel StrongARM EBSA-285 evaluation board.

        * include/pkgconf/io_serial.h (CYGPKG_IO_SERIAL_ARM_EBSA285):

        Config for it.

        * src/PKGconf.mak (EXTRAS_COMPILE): Compile it.

        * tests/ser_test_protocol.inl (TEST_SER_DEV): Enable testing of it.

1999-07-08  Jesper Skov  

        * tests/ser_test_protocol.inl (change_config): Changed implementation.

1999-06-27  Gary Thomas  

        * src/powerpc/quicc_smc_serial.c (quicc_smc_serial_init): More robust

        initialization, with data cache disabled.  This seems to fix the

        random failures described below.

        * tests/ser_test_protocol.inl: Add configuration for QUICC/MBX860.

        Added some delays in the configuration change code to make QUICC

        happy [didn't help much although the manual says they are required].

        * src/powerpc/quicc_smc_serial.h (UART_BITRATE): Rewrote macro to

        match what the Linux driver uses - still doesn't work well, though.

        * src/powerpc/quicc_smc_serial.c: Lots of changes trying to get the

        serial driver working and robust.  At this point it works quite well,

        using the default buffer sizes.  Changing from the defaults seem to

        easily break it though, certainly on input.  Also, changing the baud

        rate seems to not work reliably.

        * src/common/serial.c: Add some tracing/debug info to try and debug

        problems with QUICC serial driver.  These are hard disabled with

        "XX_" prepended to "CYGDBG_DIAG_BUF".  Enabling them gives information

        about how/when data are delivered from the serial driver.

        * include/pkgconf/io_serial.h: Adjust limits and defaults on number and

        size of buffers with values that seem to work.

1999-06-21  Jesper Skov  

        * src/sh/sh_sci_serial.c: Rearranged inclusion of .inl file a bit

        to avoid compiler warnings.

1999-06-21  Gary Thomas  

        * include/pkgconf/io_serial.h: Fix CDL for number of buffers.

        * src/powerpc/quicc_smc_serial.c: Force number of buffers = 1.

1999-06-20  Gary Thomas  

        * include/pkgconf/io_serial.h: Some clean up (removed commented

        obsolete CDL parenting structure).

        Add support for Motorola PowerPC QUICC/SMC.

        * src/arm/cma230_serial.c:

        * src/arm/cl7211_serial.c:

        * src/arm/aeb_serial.c:

        * src/arm/pid_serial_with_ints.c: Use #include to get 'diag_printf()'

        prototypes.

1999-06-17  Gary Thomas  

        * src/arm/cl7211_serial.c (cl7211_serial_start_xmit): Fix race which

        cause xmitter to get stuck.

1999-06-16  Jesper Skov  

        * src/sh/sh_serial.c:          [removed]

        * src/sh/sh_sci_serial.c:      [added]

        * src/sh/sh_sci_7708.inl:      [added]

        * include/pkgconf/io_serial.h:

        * src/PKGconf.mak (EXTRAS_COMPILE):

        * tests/ser_test_protocol.inl:

        Renamed CDL options and restructered driver.

        Fixed CDL typo.

1999-06-04  Jesper Skov  

        * include/pkgconf/io_serial.h: Fixed CDL string for BAUD rate option.

1999-06-04  Gary Thomas  

        * tests/ser_test_protocol.inl: Disable testing at 115200

        for Cogent CMA230 (ARM).

        * src/arm/cma230_serial.c: Fix interrupt for port B.

1999-05-31  Jesper Skov  

        * src/sh/sh_serial.c: Fixed receive interrupts and added handler for

        error interrupts.

1999-05-28  Jesper Skov  

        * io/serial/current/src/PKGconf.mak:

        * io/serial/current/tests/ser_test_protocol.inl:

        * include/pkgconf/io_serial.h:

        Renamed SH platform package to edk7708.

1999-05-27  Jesper Skov  

        * tests/ser_test_protocol.inl: Added ability to change options in

        host software.

1999-05-27  Jonathan Larmour  

        * src/mn10300/mn10300_serial.c (mn10300_serial_config_port):

        Wait for the serial device to become acquiescent before disabling

        it. This prevents cygmon's outgoing characters getting corrupted

        due to transmission being disabled.

        Fix for PR 20047

1999-05-26  Gary Thomas  

        * include/pkgconf/io_serial.h:

        * tests/ser_test_protocol.inl: Add Cogent CMA230 setup.

        * src/arm/cma230_serial.c: Make names compatible with Cogent

        PowerPC board.

1999-05-26  Gary Thomas  

        * tests/ser_test_protocol.inl: Add Cirrus Logic CL7211 setup.

1999-05-26  Jesper Skov  

        * src/sh/sh_serial.c: Added more baud rate values. Disabled

        interrupt driven receive. Fixed config_port to enable proper

        interrupt flags.

1999-05-25  Jonathan Larmour  

        * tests/ser_test_protocol.inl:

        Change all mentions of CYGPKG_HAL_TX39_JMR3904 to

        CYGPKG_HAL_MIPS_TX39_JMR3904

1999-05-25  Jonathan Larmour  

        * src/PKGconf.mak (EXTRAS_COMPILE): Change CYG_HAL_TX39 to

        CYG_HAL_MIPS_TX39

1999-05-25  Jesper Skov  

        * tests/ser_test_protocol.inl: Added sh entry.

1999-05-24  Jesper Skov  

        * src/PKGconf.mak:

        * include/pkgconf/io_serial.h:

        * src/sh/sh_serial.c:

        Added sh driver.

1999-05-18  Jesper Skov  

        PR 19926

        * src/sparclite/sleb_sdtr.c (sleb_sdtr_rx_DSR): Only read chan if

        there is one.

1999-05-18  Jesper Skov  

        PR 19926

        * src/arm/cl7211_serial.c (cl7211_serial_rx_DSR): Only read char

        if there is one.

1999-05-16  Gary Thomas  

        * src/arm/cl7211_serial.c: Clean up, first working version.

1999-05-14  Jesper Skov  

        * tests/ser_test_protocol.inl: Removed workaround for spurious

        Cogent reads.

        * src/arm/aeb_serial.c:

        * src/arm/aeb_serial.h:

        * src/arm/pid_serial_with_ints.c:

        * src/arm/pid_serial.h:

        * src/powerpc/cogent_serial.h:

        * src/powerpc/cogent_serial_with_ints.c:

        Check for receive interrupt before reading.

1999-05-13  Nick Garnett  

        The follow changes were made in a branch an have now been merged:

    1999-04-21  Gary Thomas  

        * src/mips/vrc4373_serial.c: Small changes to get working with

        interrupts.

    1999-04-20  John Dallaway  

        * include/pkgconf/io_serial.h: Fix CYGPKG_IO_SERIAL_TX39_JMR3904

        parent attribute.

1999-05-11  Gary Thomas  

        * src/arm/cl7211_serial.c: Fix compile problems from merged code.

1999-05-05  Jesper Skov  

        * tests/ser_test_protocol.inl: Tidied up a bit and added

        description of protocol.

1999-05-05  Jesper Skov  

        * src/common/serial.c (serial_write, serial_read): Clear abort

        flag at entry.

1999-05-05  Jesper Skov  

        * tests/serial4.c (serial_test): Handle config fails correctly.

        * tests/ser_test_protocol.inl: Better change_config

        handling. Simple recovery and negotiation isn't timing

        dependant.

1999-05-05  Jesper Skov  

        * tests/timeout.inl: Updated with the below changes.

1999-05-05  Gary Thomas  

        * misc/timeout.inl (timeout): Timeouts are relative, but alarms

        need absolute time values.

1999-05-04  Jesper Skov  

        PR 20018

        * tests/serial1.c (serial_test): Always PASS, regardless of

        configuration.

1999-05-04  Jesper Skov  

        * tests/ser_test_protocol.inl: Reverse order of configurations -

        run tests with slow baud rate first.

        Only check CYG_KERNEL_DIAG_GDB_SERIAL_DIRECT for SLEB on RAM startup.

1999-05-04  Jesper Skov  

        * src/mn10300/mn10300_serial.c:

        Use interrupt enable/disable feature of serial port2 to allow

        coexistence with CygMon/hal_diag.

        * tests/ser_test_protocol.inl: Use port2 for MN10300.

1999-04-28  Bart Veer  

        * src/PKGconf.mak (EXTRAS_COMPILE):

        Use the new rules for generating libextras.a

1999-04-26  Gary Thomas  

        * include/pkgconf/io_serial.h: Add support for Cirrus Logic CL7211.

1999-04-20  Gary Thomas  

        * src/arm/aeb_serial.c:

        * src/arm/pid_serial_with_ints.c: Fix default baud rate if unbuffered.

1999-04-20  Jesper Skov  

        * tests/ser_test_protocol.inl: Added some comments. Disabled 38400

        for SLEB. Only run test on SLEB if CygMon isn't used for diag

        output.

1999-04-15  Jesper Skov  

        PR 19752

        * tests/serial3.c:

        * tests/serial5.c:

        Run these tests at a lower baud rate on ARM AEB.

1999-04-14  Jesper Skov  

        PR 19839

        * src/mn10300/mn10300_serial.c:

        Fix compiler warnings.

1999-04-14  Bart Veer  

        * include/pkgconf/io_serial.h:

        Reparent the board-specific serial devices below the actual boards.

1999-04-13  Jesper Skov  

        * tests/ser_test_protocol.inl:

        NA when run from simulator.

1999-04-12  Jesper Skov  

        * tests/ser_test_protocol.inl:

        Disabled 115200 for MN10300.

        Reclaim interrupt vectors from CygMon when testing on SLEB.

1999-04-09  Gary Thomas  

        * include/serial.h: Change SERIAL_CHANNEL setup so all channels

        have serial callbacks, regardless of buffering.

1999-04-09  Jesper Skov  

        * src/common/tty.c:

        * include/pkgconf/io_serial.h:

        Added new ttydiag device layered on top of haldiag, so that tty0

        can be layered on top of ser0.

1999-04-08  Jesper Skov  

        * tests/tty1.c:                [added]

        * tests/tty2.c:                [added]

        * tests/PKGconf.mak:

        * tests/ser_test_protocol.inl:

        Added two simple TTY tests.

1999-04-07  Hugo Tyson  

        * src/sparclite/sleb_sdtr.h: Include cyg/hal/hal_io.h for I/O

        macros instead of hal_diag.h where they had evolved before.

1999-04-06  Jesper Skov  

        * tests/serial4.c (serial_test):

        * tests/serial3.c (serial_test):

        Reduce packet sizes.

1999-03-31  Jesper Skov  

        * tests/ser_test_protocol.inl: Added remaining targets to the

        test.

1999-03-31  Gary Thomas  

        * src/sparclite/sleb_sdtr.c (sleb_sdtr_start_xmit): Fix timing race

        when enabling xmit interrupts.

1999-03-26  Gary Thomas  

        * src/sparclite/sleb_sdtr.c: Change how the port is set up.  The transmitter

        is now always enabled, just the interrupts are masked/unmasked to control it.

        This lets the serial driver cooperate with Cygmon on the port used for GDB.

        Note that currently serial input does not work for CON1 since Cygmon is

        taking all of the receive interrupts for itself.

        (sleb_sdtr_tx_DSR): Need to keep track whether xmit interrupt should be

        enabled - otherwise it can get enabled incorrectly and we get interrupted

        to death!

1999-03-26  Jesper Skov  

        * tests/ser_test_protocol.inl: Send a DONE message after a no-echo

        binary packet.

1999-03-26  Hugo Tyson  

        * tests/serial5.c:

        * tests/serial4.c:

        * tests/serial3.c:

        * tests/serial2.c:

        * tests/serial1.c:

        Make these build when no kernel present; include of testcase

        was the wrong side of the ifdef.

1999-03-26  Jesper Skov  

        * tests/serial5.c:

        * tests/serial4.c:

        * tests/serial3.c:

        * tests/serial2.c:

        * tests/serial1.c:

        Moved NOP check to ser_test_protocol open call.

        * tests/ser_test_protocol.inl: Make sure the proper device is

        selected for testing. Do NOP check in open call.

1999-03-25  Gary Thomas  

        * include/pkgconf/io_serial.h:

        * misc/console.c:

        * src/arm/aeb_serial.c:

        * src/arm/pid_serial_with_ints.c:

        * src/common/tty.c:

        * src/mips/tx3904_serial.c:

        * src/mn10300/mn10300_serial.c:

        * src/powerpc/cogent_serial_with_ints.c:

        * src/sparclite/sleb_sdtr.c: Update CDL to follow naming conventions.

        * src/mips/tx3904_serial.c (tx3904_serial_config_port):

        Make sure port is enabled (CDL) before using it.

        * src/mn10300/mn10300_serial.c (mn10300_serial_config_port):

        * src/powerpc/cogent_serial_with_ints.c (cogent_serial_config_port):

        * src/arm/aeb_serial.c (aeb_serial_config_port):

        * src/arm/pid_serial_with_ints.c (pid_serial_config_port): Change so that

        the physical port is not modified unless the provided configuration is valid.

        * src/sparclite/sleb_sdtr.c (sleb_sdtr_config_port):

        Using wrong config data.

        * include/serialio.h: Add macros to support baud rate from CDL.

        * include/pkgconf/io_serial.h:

        * src/mn10300/mn10300_serial.c:

        * src/mips/tx3904_serial.c (tx3904_serial_ISR):

        * src/sparclite/sleb_sdtr.c:

        * src/powerpc/cogent_serial_with_ints.c:

        * src/arm/pid_serial_with_ints.c:

        * src/arm/aeb_serial.c: Add configury for baud rate and buffer size.

1999-03-24  Nick Garnett  

        * src/mips/tx3904_serial.c:

        Now uses CYGHWR_HAL_MIPS_CPU_FREQ_ACTUAL to get CPU

        frequency. This is a little more accurate than using

        CYGHWR_HAL_MIPS_CPU_FREQ.

1999-03-24  Gary Thomas  

        * include/serialio.h (CYGNUM_SERIAL_BAUD_MIN/MAX): Add for completeness.

        * src/arm/aeb_serial.c (aeb_serial_stop_xmit):

        * src/arm/pid_serial_with_ints.c (pid_serial_stop_xmit): Fix typo in comment.

1999-03-24  Jesper Skov  

        * tests/ser_test_protocol.inl: Weeded out configs TX39 doesn't

        like.

        * src/powerpc/cogent_serial.h:

        Added copyright header.

        * tests/ser_test_protocol.inl:

        * tests/serial1.c:

        * tests/serial2.c:

        * tests/serial3.c:

        * tests/serial4.c:

        * tests/serial5.c:

        Don't try to run tests when no IO device has been specified.

1999-03-23  Jesper Skov  

        * misc/serial1.c, misc/serial2.c, misc/serial3.c, misc/serial4.c,

        * misc/serial5.c, misc/ser_test_protocol.inl

        Deleted.

1999-03-23  Jesper Skov  

        * misc/PKGconf.mak:

        * tests/timeout.inl:

        * tests/PKGconf.mak:

        * tests/serial1.c:

        * tests/serial2.c:

        * tests/serial3.c:

        * tests/serial4.c:

        * tests/serial5.c:

        * tests/ser_test_protocol.inl:

        Moved the serial tests from the misc directory to the tests

        directory.

1999-03-23  Nick Garnett  

        * src/mn10300/mn10300_serial.c: Now initially mask TX interrupts

        at initialization and unmask/remask in start/stop xmit

        routines. This has no real effect on the hardware, but the

        simulator does not implement the LCR_TXE bit properly, resulting

        in spurious TX interrupts during diagnostic output.

        This was the cause of the slow output reported in PR 19559.

1999-03-23  Gary Thomas  

        * include/pkgconf/io_serial.h: Fix "display" strings to have appropriate

        case - mostly lower case.

1999-03-22  Hugo Tyson  

        * misc/console.c:

        * misc/serial.c:

        * misc/serial1.c:

        * misc/serial2.c:

        * misc/serial3.c:

        * misc/serial4.c:

        * misc/serial5.c:

        Use CYGNUM_HAL_STACK_SIZE_TYPICAL for the stack size instead of

        CYGNUM_HAL_MINIMUM_STACK_SIZE.

1999-03-22  Gary Thomas  

        * src/mn10300/mn10300_serial.c:

        * src/mips/tx3904_serial.c: Add CDL configury.

        * include/pkgconf/io_serial.h: Update CDL to add device name

        configurability for all devices.

        * src/sparclite/sleb_sdtr.c:

        * src/powerpc/cogent_serial_with_ints.c:

        * src/arm/aeb_serial.c:

        * src/arm/pid_serial_with_ints.c: Use CDL configured device names.

1999-03-22  Jesper Skov  

        * misc/serial1.c:

        * misc/serial2.c:

        * misc/serial3.c:

        * misc/serial4.c:

        * misc/serial5.c:

        Requires kernel as well.

1999-03-22  Jesper Skov  

        * src/sparclite/sleb_sdtr.c:

        Moved include statement to avoid warnings.

1999-03-19  Jesper Skov  

        * misc/ser_test_protocol.inl:

        * misc/serial5.c:

        * misc/PKGconf.mak:

        Replace complex and not very stable duplex test with a simpler

        test that works better.

        Added serial5 using that test.

1999-03-19  Jesper Skov  

        * misc/PKGconf.mak:

        * misc/serial1.c:

        * misc/serial2.c:

        Added API test and made serial2 do simple string output.

1999-03-19  Jesper Skov