Subversion Repositories openrisc

# ====================================================================

#

#      ser_sh_se77x9.cdl

#

#      eCos serial SH/SE77X9 configuration data

#

# ====================================================================

#####ECOSGPLCOPYRIGHTBEGIN####

## -------------------------------------------

## This file is part of eCos, the Embedded Configurable Operating System.

## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

##

## eCos is free software; you can redistribute it and/or modify it under

## the terms of the GNU General Public License as published by the Free

## Software Foundation; either version 2 or (at your option) any later version.

##

## eCos is distributed in the hope that it will be useful, but WITHOUT ANY

## WARRANTY; without even the implied warranty of MERCHANTABILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License along

## with eCos; if not, write to the Free Software Foundation, Inc.,

## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

##

## As a special exception, if other files instantiate templates or use macros

## or inline functions from this file, or you compile this file and link it

## with other works to produce a work based on this file, this file does not

## by itself cause the resulting work to be covered by the GNU General Public

## License. However the source code for this file must still be made available

## in accordance with section (3) of the GNU General Public License.

##

## This exception does not invalidate any other reasons why a work based on

## this file might be covered by the GNU General Public License.

##

## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

## at http://sources.redhat.com/ecos/ecos-license/

## -------------------------------------------

#####ECOSGPLCOPYRIGHTEND####

# ====================================================================

######DESCRIPTIONBEGIN####

#

# Author(s):      jskov

# Contributors:

# Date:           2001-06-18

#

#####DESCRIPTIONEND####

#

# ====================================================================

cdl_package CYGPKG_IO_SERIAL_SH_SE77X9 {

    display       "SH3 SE77X9 serial device drivers"

    parent        CYGPKG_IO_SERIAL_DEVICES

    active_if     CYGPKG_IO_SERIAL

    active_if     CYGPKG_HAL_SH_SH77X9_SE77X9

    requires      CYGPKG_ERROR

    include_dir   cyg/io

    description   "

        This option enables the serial device drivers for the

        Hitachi SH3 SE77X9 board, based on the generic SH SCI driver."

    # FIXME: This really belongs in the SH_SCIF package

    cdl_interface CYGINT_IO_SERIAL_SH_SCIF_REQUIRED {

        display   "SH SCI driver required"

    }

    # FIXME: This really belongs in the GENERIC_16X5X package

    cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED {

        display   "Generic 16x5x serial driver required"

    }

    define_proc {

        puts $::cdl_system_header "/***** serial driver proc output start *****/"

        puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_INL "

        puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_CFG "

        puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_SH_SCIF_INL "

        puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_SH_SCIF_CFG "

        puts $::cdl_system_header "/*****  serial driver proc output end  *****/"

    }

    cdl_component CYGPKG_IO_SERIAL_SH_SE77X9_COM1 {

        display       "SH SE77X9 serial 1 driver (SuperIO)"

        flavor        bool

        calculated    0

        description   "

            This option includes the serial device driver for the COM1

            port. FIXME: Disabled due to being broken."

        implements CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED

        implements CYGINT_IO_SERIAL_FLOW_CONTROL_HW

        implements CYGINT_IO_SERIAL_LINE_STATUS_HW

        cdl_option CYGDAT_IO_SERIAL_SH_SE77X9_COM1_NAME {

            display       "Device name for COM1"

            flavor        data

            default_value {"\"/dev/ser1\""}

            description   "

                This option specifies the device name for COM1."

        }

        cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BAUD {

            display       "Baud rate for COM1"

            flavor        data

            legal_values  { 4800 9600 14400 19200 38400 57600 115200 }

            default_value 38400

            description   "

                This option specifies the default baud rate (speed)

                for the COM1 port."

        }

        cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BUFSIZE {

            display       "Buffer size for COM1"

            flavor        data

            legal_values  0 to 8192

            default_value 128

            description   "

                This option specifies the size of the internal buffers

                used for the COM1 port."

        }

    }

    # SCIF port

    cdl_component CYGPKG_IO_SERIAL_SH_SE77X9_COM2 {

        display       "SE77X9 serial, SCIF port 2 driver"

        flavor        bool

        default_value 1

        description   "

            This option includes the serial device driver for SCIF

            port 2."

        implements CYGINT_IO_SERIAL_SH_SCIF_REQUIRED

        implements CYGINT_IO_SERIAL_FLOW_CONTROL_HW

        implements CYGINT_IO_SERIAL_LINE_STATUS_HW

        cdl_option CYGDAT_IO_SERIAL_SH_SE77X9_COM2_NAME {

            display       "Device name"

            flavor        data

            default_value {"\"/dev/ser2\""}

            description   "

                This option specifies the device name for the serial

                port."

        }

        cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BAUD {

            display       "Baud rate"

            flavor        data

            legal_values  { 4800 9600 14400 19200 38400 57600 115200 }

            default_value 38400

            description   "

                This option specifies the default baud rate (speed)

                for the serial driver."

        }

        cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BUFSIZE {

            display       "Buffer size"

            flavor        data

            legal_values  0 to 8192

            default_value 128

            description   "

                This option specifies the size of the internal buffers

                used for the serial driver."

        }

        cdl_option CYGSEM_IO_SERIAL_SH_SE77X9_COM2_DMA {

            display       "Enable SCIF serial driver DMA"

            active_if     CYGINT_HAL_SH_DMA_CHANNELS

            implements    CYGINT_HAL_SH_DMA_CHANNELS_USED

            implements    CYGINT_IO_SERIAL_SH_SCIF_DMA

            default_value 1

            description   "

                Enable DMA for this port."

        }

    }

    cdl_component CYGPKG_IO_SERIAL_SH_SE77X9_TESTING {

        display    "Testing parameters"

        flavor     bool

        calculated 1

        no_define

        active_if  CYGPKG_IO_SERIAL_SH_SE77X9_COM2

        define_proc {

            puts $::cdl_header "#define CYGPRI_SER_TEST_CRASH_ID \"sh-se77x9\""

            puts $::cdl_header "#define CYGPRI_SER_TEST_SER_DEV  CYGDAT_IO_SERIAL_SH_SE77X9_COM2_NAME"

            puts $::cdl_header "#define CYGPRI_SER_TEST_TTY_DEV  \"/dev/tty2\""

        }

    }

}

# EOF ser_sh_se77x9.cdl