Subversion Repositories openrisc

#

# Define types of data by mib type, and translate into needed C code.

#

############################################################################

# source variable typing information:

include: mib2c.vartypes.conf

# Begin code template section

############################################################################

# variable statemnts used in a couple of places below

############################################################################

type:   code-varInits

code:     /* variables we may use later */

code:     static long long_ret;

code:     static unsigned char string[SPRINT_MAX_LEN];

code:     static oid objid[MAX_OID_LEN];

code:     static struct counter64 c64;

############################################################################

# The .h file

############################################################################

type:   code-dot-h

code:   //==========================================================================

code:   //

code:   //      snmp/snmpagent/current/include/mibgroup/mibII/$outputName.h

code:   //

code:   //

code:   //==========================================================================

#####ECOSGPLCOPYRIGHTBEGIN####

## -------------------------------------------

## This file is part of eCos, the Embedded Configurable Operating System.

## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

##

## eCos is free software; you can redistribute it and/or modify it under

## the terms of the GNU General Public License as published by the Free

## Software Foundation; either version 2 or (at your option) any later version.

##

## eCos is distributed in the hope that it will be useful, but WITHOUT ANY

## WARRANTY; without even the implied warranty of MERCHANTABILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License along

## with eCos; if not, write to the Free Software Foundation, Inc.,

## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

##

## As a special exception, if other files instantiate templates or use macros

## or inline functions from this file, or you compile this file and link it

## with other works to produce a work based on this file, this file does not

## by itself cause the resulting work to be covered by the GNU General Public

## License. However the source code for this file must still be made available

## in accordance with section (3) of the GNU General Public License.

##

## This exception does not invalidate any other reasons why a work based on

## this file might be covered by the GNU General Public License.

##

## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

## at http://sources.redhat.com/ecos/ecos-license/

## -------------------------------------------

#####ECOSGPLCOPYRIGHTEND####

code:   //####UCDSNMPCOPYRIGHTBEGIN####

code:   //

code:   // -------------------------------------------

code:   //

code:   // Portions of this software may have been derived from the UCD-SNMP

code:   // project,    from the University of

code:   // California at Davis, which was originally based on the Carnegie Mellon

code:   // University SNMP implementation.  Portions of this software are therefore

code:   // covered by the appropriate copyright disclaimers included herein.

code:   //

code:   // The release used was version 4.1.2 of May 2000.  \"ucd-snmp-4.1.2\"

code:   // -------------------------------------------

code:   //

code:   //####UCDSNMPCOPYRIGHTEND####

code:   //==========================================================================

code:   //#####DESCRIPTIONBEGIN####

code:   //

code:   // Author(s):    hmt

code:   // Contributors: hmt

code:   // Date:         2000-05-30

code:   // Purpose:      Port of UCD-SNMP distribution to eCos.

code:   // Description:

code:   //

code:   //

code:   //####DESCRIPTIONEND####

code:   //

code:   //==========================================================================

code:   /********************************************************************

code:          Copyright 1989, 1991, 1992 by Carnegie Mellon University

code:   \

code:                             Derivative Work -

code:   Copyright 1996, 1998, 1999, 2000 The Regents of the University of California

code:   \

code:                            All Rights Reserved

code:   \

code:   Permission to use, copy, modify and distribute this software and its

code:   documentation for any purpose and without fee is hereby granted,

code:   provided that the above copyright notice appears in all copies and

code:   that both that copyright notice and this permission notice appear in

code:   supporting documentation, and that the name of CMU and The Regents of

code:   the University of California not be used in advertising or publicity

code:   pertaining to distribution of the software without specific written

code:   permission.

code:   \

code:   CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL

code:   WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED

code:   WARRANTIES OF MERCHANTABILITY AND FITNESS.  IN NO EVENT SHALL CMU OR

code:   THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL,

code:   INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING

code:   FROM THE LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF

code:   CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN

code:   CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

code:   *********************************************************************/

code:   /* This file was generated by mib2c and is intended for use as a mib module

code:     for the ucd-snmp snmpd agent. */

code:

code:   #ifndef _MIBGROUP_${OUTPUTNAME}_H

code:   #define _MIBGROUP_${OUTPUTNAME}_H

code:

code:   /* we may use header_generic and header_simple_table from the util_funcs module */

code:

code:   config_require(util_funcs)

code:

code:   /* function prototypes */

code:

code:   void   init_$outputName(void);

code:   FindVarMethod var_$outputName;

code:   $variables{'code-var_table-decl'}{'processed'}

code:   $variables{'code-write-func-decl'}{'processed'}

code:

code:   #endif /* _MIBGROUP_${OUTPUTNAME}_H */

############################################################################

# The .c file, top

############################################################################

type:   code-main-part

code:   //==========================================================================

code:   //

code:   //      snmp/snmpagent/current/src/mibgroup/mibII/$outputName.c

code:   //

code:   //

code:   //==========================================================================

#####ECOSGPLCOPYRIGHTBEGIN####

## -------------------------------------------

## This file is part of eCos, the Embedded Configurable Operating System.

## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

##

## eCos is free software; you can redistribute it and/or modify it under

## the terms of the GNU General Public License as published by the Free

## Software Foundation; either version 2 or (at your option) any later version.

##

## eCos is distributed in the hope that it will be useful, but WITHOUT ANY

## WARRANTY; without even the implied warranty of MERCHANTABILITY or

## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

## for more details.

##

## You should have received a copy of the GNU General Public License along

## with eCos; if not, write to the Free Software Foundation, Inc.,

## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

##

## As a special exception, if other files instantiate templates or use macros

## or inline functions from this file, or you compile this file and link it

## with other works to produce a work based on this file, this file does not

## by itself cause the resulting work to be covered by the GNU General Public

## License. However the source code for this file must still be made available

## in accordance with section (3) of the GNU General Public License.

##

## This exception does not invalidate any other reasons why a work based on

## this file might be covered by the GNU General Public License.

##

## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

## at http://sources.redhat.com/ecos/ecos-license/

## -------------------------------------------

#####ECOSGPLCOPYRIGHTEND####

code:   //####UCDSNMPCOPYRIGHTBEGIN####

code:   //

code:   // -------------------------------------------

code:   //

code:   // Portions of this software may have been derived from the UCD-SNMP

code:   // project,    from the University of

code:   // California at Davis, which was originally based on the Carnegie Mellon

code:   // University SNMP implementation.  Portions of this software are therefore

code:   // covered by the appropriate copyright disclaimers included herein.

code:   //

code:   // The release used was version 4.1.2 of May 2000.  \"ucd-snmp-4.1.2\"

code:   // -------------------------------------------

code:   //

code:   //####UCDSNMPCOPYRIGHTEND####

code:   //==========================================================================

code:   //#####DESCRIPTIONBEGIN####

code:   //

code:   // Author(s):    hmt

code:   // Contributors: hmt

code:   // Date:         2000-05-30

code:   // Purpose:      Port of UCD-SNMP distribution to eCos.

code:   // Description:

code:   //

code:   //

code:   //####DESCRIPTIONEND####

code:   //

code:   //==========================================================================

code:   /********************************************************************

code:          Copyright 1989, 1991, 1992 by Carnegie Mellon University

code:   \

code:                             Derivative Work -

code:   Copyright 1996, 1998, 1999, 2000 The Regents of the University of California

code:   \

code:                            All Rights Reserved

code:   \

code:   Permission to use, copy, modify and distribute this software and its

code:   documentation for any purpose and without fee is hereby granted,

code:   provided that the above copyright notice appears in all copies and

code:   that both that copyright notice and this permission notice appear in

code:   supporting documentation, and that the name of CMU and The Regents of

code:   the University of California not be used in advertising or publicity

code:   pertaining to distribution of the software without specific written

code:   permission.

code:   \

code:   CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL

code:   WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED

code:   WARRANTIES OF MERCHANTABILITY AND FITNESS.  IN NO EVENT SHALL CMU OR

code:   THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL,

code:   INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING

code:   FROM THE LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF

code:   CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN

code:   CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

code:   *********************************************************************/

code:   /* This file was generated by mib2c and is intended for use as a mib module

code:      for the ucd-snmp snmpd agent. */

code:

code:   /* This should always be included first before anything else */

code:   #include 

code:

code:   /* minimal include directives */

code:   #include \"mibincl.h\"

code:   #include \"mibgroup/util_funcs.h\"

code:   #include \"mibgroup/mibII/$outputName.h\"

code:

code:   /*

code:    * ${outputName}_variables_oid:

code:    *   this is the top level oid that we want to register under.  This

code:    *   is essentially a prefix, with the suffix appearing in the

code:    *   variable below.

code:    */

code:

code:   oid ${outputName}_variables_oid[] = { $commaoid };

code:

code:   /*

code:    * variable$varlen ${outputName}_variables:

code:    *   this variable defines function callbacks and type return information

code:    *   for the $outputName mib section

code:    */

code:

code:   struct variable$varlen ${outputName}_variables[] = {

code:   /*  magic number        , variable type , ro/rw , callback fn  , L, oidsuffix */

code:   $variables{'variable-structure-info'}{'processed'}

code:   };

code:   /*    (L = length of the oidsuffix) */

code:

code:   /*

code:    * init_$outputName():

code:    *   Initialization routine.  This is called when the agent starts up.

code:    *   At a minimum, registration of your variables should take place here.

code:    */

code:   void init_$outputName(void) {

code:

code:     /* register ourselves with the agent to handle our mib tree */

code:     REGISTER_MIB(\"$outputName\", ${outputName}_variables, variable$varlen,\

code:                  ${outputName}_variables_oid);

code:

code:     /* place any other initialization junk you need here */

code:   }

code:

code:   /*

code:    * var_$outputName():

code:    *   This function is called every time the agent gets a request for

code:    *   a scalar variable that might be found within your mib section

code:    *   registered above.  It is up to you to do the right thing and

code:    *   return the correct value.

code:    *     You should also correct the value of \"var_len\" if necessary.

code:    *

code:    *   Please see the documentation for more information about writing

code:    *   module extensions, and check out the examples in the examples

code:    *   and mibII directories.

code:    */

code:   unsigned char *

code:   var_$outputName(struct variable *vp,

code:                   oid     *name,

code:                   size_t  *length,

code:                   int     exact,

code:                   size_t  *var_len,

code:                   WriteMethod **write_method)

code:   {

code:

code:   $variables{'code-varInits'}{'code'}

code:

code:     if (header_generic(vp,name,length,exact,var_len,write_method)

code:                                     == MATCH_FAILED )

code:       return NULL;

code:

code:     /*

code:      * this is where we do the value assignments for the mib results.

code:      */

code:     switch(vp->magic) {\n\n

code:   $variables{$outputName}{'code-case-statements'}{'processed'}

code:       default:

code:         ERROR_MSG(\"\");

code:     }

code:     return NULL;

code:   }

code:

code:   $variables{'code-var_table'}{'processed'}

code:

code:   $variables{'code-write-func'}{'processed'}

############################################################################

# var_ function for tables, which is handled specially and used above

#

#   Note: $vtable is set to the table name in the processtable loop.

############################################################################

#

# header file defs first

#

type:           code-var_table-decl

processtable:   code-var_table-decl

code:   FindVarMethod var_$vtable;

#

# Code code per table

#

type:           code-var_table

processtable:   code-var_table

code:   /*

code:    * var_$vtable():

code:    *   Handle this table separately from the scalar value case.

code:    *   The workings of this are basically the same as for var_$outputName above.

code:    */

code:   unsigned char *

code:   var_$vtable(struct variable *vp,

code:               oid     *name,

code:               size_t  *length,

code:               int     exact,

code:               size_t  *var_len,

code:               WriteMethod **write_method)

code:   {

code:

code:   $variables{'code-varInits'}{'code'}

code:

code:     /*

code:      * This assumes that the table is a \'simple\' table.

code:      *    See the implementation documentation for the meaning of this.

code:      *    You will need to provide the correct value for the TABLE_SIZE parameter

code:      *

code:      * If this table does not meet the requirements for a simple table,

code:      *    you will need to provide the replacement code yourself.

code:      *    Mib2c is not smart enough to write this for you.

code:      *    Again, see the implementation documentation for what is required.

code:      */

code:     if (header_simple_table(vp,name,length,exact,var_len,write_method, TABLE_SIZE)

code:                                                   == MATCH_FAILED )

code:       return NULL;

code:

code:     /*

code:      * this is where we do the value assignments for the mib results.

code:      */

code:     switch(vp->magic) {\n\n

code:   $variables{$vtable}{'code-case-statements'}{'processed'}

code:       default:

code:         ERROR_MSG(\"\");

code:     }

code:     return NULL;

code:   }

############################################################################

# case statement sections

############################################################################

type:           code-case-statements

process:        code-case-statements

skipif:         $mib->{'access'} =~ /NoAccess/

code:               case $NAME:

code:                   " . (($mib->{'access'} =~ /ReadWrite|WriteOnly|Create/) ? "*write_method = write_$mib->{label};" : "") . "

code:           $variables{$mib->{'type'}}{'case'}

code:

############################################################################

# storage structure information

############################################################################

type:           variable-structure-info

process:        variable-structure-info

skipif:         $mib->{'access'} =~ /NoAccess/

code:           " . sprintf("#define   %-20s  $count", $NAME) . "

code:           " . sprintf("  { %-20s, %-14s, %-6.6s, %s, %d, { %s } },", $NAME, $variables{$mib->{'type'}}{'asnType'}, $accessToUCD{$mib->{'access'}}, "var_$vroutine", $depth-1, $subid) . "

############################################################################

# write function defitition, also appended to the end of the .c file.

############################################################################

#

# Header info: declair write functions for set processing

#

process:        code-write-func-decl

type:           code-write-func-decl

skipif:         $mib->{'access'} !~ /Write|Create/

code:           WriteMethod write_$name;

#

# C code

#

type:           code-write-func

process:        code-write-func

skipif:         $mib->{'access'} !~ /Write|Create/

code:   int

code:   write_$name(int      action,

code:               u_char   *var_val,

code:               u_char   var_val_type,

code:               size_t   var_val_len,

code:               u_char   *statP,

code:               oid      *name,

code:               size_t   name_len)

code:   {

code:     $variables{$mib->{'type'}}{writeInit}

code:     int size;

code:

code:     switch ( action ) {

code:           case RESERVE1:

code:             if (var_val_type != $variables{$mib->{'type'}}{asnType}){

code:                 fprintf(stderr, \"write to $name not $variables{$mib->{'type'}}{asnType}\\n\");

code:                 return SNMP_ERR_WRONGTYPE;

code:             }

code:             if (var_val_len > sizeof($variables{$mib->{'type'}}{variable})){

code:                 fprintf(stderr,\"write to $name: bad length\\n\");

code:                 return SNMP_ERR_WRONGLENGTH;

code:             }

code:             break;

code:

code:           case RESERVE2:

code:             size = var_val_len;

code:             $variables{$mib->{'type'}}{variable} = ($variables{$mib->{'type'}}{cast}) var_val;

code:

code:             break;

code:

code:           case FREE:

code:                /* Release any resources that have been allocated */

code:             break;

code:

code:           case ACTION:

code:                /* The variable has been stored in $variables{$mib->{'type'}}{variable} for

code:                you to use, and you have just been asked to do something with

code:                it.  Note that anything done here must be reversable in the UNDO case */

code:             break;

code:

code:           case UNDO:

code:                /* Back out any changes made in the ACTION case */

code:             break;

code:

code:           case COMMIT:

code:                /* Things are working well, so it's now safe to make the change

code:                permanently.  Make sure that anything done here can't fail! */

code:             break;

code:     }

code:     return SNMP_ERR_NOERROR;

code:   }

code:

code: