Subversion Repositories openrisc

/*

    FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd.

    ***************************************************************************

    *                                                                         *

    * If you are:                                                             *

    *                                                                         *

    *    + New to FreeRTOS,                                                   *

    *    + Wanting to learn FreeRTOS or multitasking in general quickly       *

    *    + Looking for basic training,                                        *

    *    + Wanting to improve your FreeRTOS skills and productivity           *

    *                                                                         *

    * then take a look at the FreeRTOS books - available as PDF or paperback  *

    *                                                                         *

    *        "Using the FreeRTOS Real Time Kernel - a Practical Guide"        *

    *                  http://www.FreeRTOS.org/Documentation                  *

    *                                                                         *

    * A pdf reference manual is also available.  Both are usually delivered   *

    * to your inbox within 20 minutes to two hours when purchased between 8am *

    * and 8pm GMT (although please allow up to 24 hours in case of            *

    * exceptional circumstances).  Thank you for your support!                *

    *                                                                         *

    ***************************************************************************

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under

    the terms of the GNU General Public License (version 2) as published by the

    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.

    ***NOTE*** The exception to the GPL is included to allow you to distribute

    a combined work that includes FreeRTOS without being obliged to provide the

    source code for proprietary components outside of the FreeRTOS kernel.

    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT

    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

    more details. You should have received a copy of the GNU General Public

    License and the FreeRTOS license exception along with FreeRTOS; if not it

    can be viewed here: http://www.freertos.org/a00114.html and also obtained

    by writing to Richard Barry, contact details for whom are available on the

    FreeRTOS WEB site.

    1 tab == 4 spaces!

    http://www.FreeRTOS.org - Documentation, latest information, license and

    contact details.

    http://www.SafeRTOS.com - A version that is certified for use in safety

    critical systems.

    http://www.OpenRTOS.com - Commercial support, development, porting,

    licensing and training services.

*/

/*-----------------------------------------------------------

 * Implementation of functions defined in portable.h for the ST STR75x ARM7

 * port.

 *----------------------------------------------------------*/

/* Library includes. */

#include "75x_tb.h"

#include "75x_eic.h"

/* Scheduler includes. */

#include "FreeRTOS.h"

#include "task.h"

/* Constants required to setup the initial stack. */

#define portINITIAL_SPSR                                ( ( portSTACK_TYPE ) 0x1f ) /* System mode, ARM mode, interrupts enabled. */

#define portTHUMB_MODE_BIT                              ( ( portSTACK_TYPE ) 0x20 )

#define portINSTRUCTION_SIZE                    ( ( portSTACK_TYPE ) 4 )

/* Constants required to handle critical sections. */

#define portNO_CRITICAL_NESTING                 ( ( unsigned long ) 0 )

/* Prescale used on the timer clock when calculating the tick period. */

#define portPRESCALE 20

/*-----------------------------------------------------------*/

/* Setup the TB to generate the tick interrupts. */

static void prvSetupTimerInterrupt( void );

/*-----------------------------------------------------------*/

/*

 * Initialise the stack of a task to look exactly as if a call to

 * portSAVE_CONTEXT had been called.

 *

 * See header file for description.

 */

portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters )

{

portSTACK_TYPE *pxOriginalTOS;

        pxOriginalTOS = pxTopOfStack;

        /* Setup the initial stack of the task.  The stack is set exactly as

        expected by the portRESTORE_CONTEXT() macro. */

        /* First on the stack is the return address - which in this case is the

        start of the task.  The offset is added to make the return address appear

        as it would within an IRQ ISR. */

        *pxTopOfStack = ( portSTACK_TYPE ) pxCode + portINSTRUCTION_SIZE;

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) 0xaaaaaaaa;  /* R14 */

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) pxOriginalTOS; /* Stack used when task starts goes in R13. */

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) 0x12121212;  /* R12 */

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) 0x11111111;  /* R11 */

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) 0x10101010;  /* R10 */

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) 0x09090909;  /* R9 */

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) 0x08080808;  /* R8 */

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) 0x07070707;  /* R7 */

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) 0x06060606;  /* R6 */

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) 0x05050505;  /* R5 */

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) 0x04040404;  /* R4 */

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) 0x03030303;  /* R3 */

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) 0x02020202;  /* R2 */

        pxTopOfStack--;

        *pxTopOfStack = ( portSTACK_TYPE ) 0x01010101;  /* R1 */

        pxTopOfStack--;

        /* When the task starts is will expect to find the function parameter in

        R0. */

        *pxTopOfStack = ( portSTACK_TYPE ) pvParameters; /* R0 */

        pxTopOfStack--;

        /* The status register is set for system mode, with interrupts enabled. */

        *pxTopOfStack = ( portSTACK_TYPE ) portINITIAL_SPSR;

        #ifdef THUMB_INTERWORK

        {

                /* We want the task to start in thumb mode. */

                *pxTopOfStack |= portTHUMB_MODE_BIT;

        }

        #endif

        pxTopOfStack--;

        /* Interrupt flags cannot always be stored on the stack and will

        instead be stored in a variable, which is then saved as part of the

        tasks context. */

        *pxTopOfStack = portNO_CRITICAL_NESTING;

        return pxTopOfStack;

}

/*-----------------------------------------------------------*/

portBASE_TYPE xPortStartScheduler( void )

{

extern void vPortISRStartFirstTask( void );

        /* Start the timer that generates the tick ISR.  Interrupts are disabled

        here already. */

        prvSetupTimerInterrupt();

        /* Start the first task. */

        vPortISRStartFirstTask();

        /* Should not get here! */

        return 0;

}

/*-----------------------------------------------------------*/

void vPortEndScheduler( void )

{

        /* It is unlikely that the ARM port will require this function as there

        is nothing to return to.  */

}

/*-----------------------------------------------------------*/

static void prvSetupTimerInterrupt( void )

{

EIC_IRQInitTypeDef  EIC_IRQInitStructure;

TB_InitTypeDef      TB_InitStructure;

        /* Setup the EIC for the TB. */

        EIC_IRQInitStructure.EIC_IRQChannelCmd = ENABLE;

        EIC_IRQInitStructure.EIC_IRQChannel = TB_IRQChannel;

        EIC_IRQInitStructure.EIC_IRQChannelPriority = 1;

        EIC_IRQInit(&EIC_IRQInitStructure);

        /* Setup the TB for the generation of the tick interrupt. */

        TB_InitStructure.TB_Mode = TB_Mode_Timing;

        TB_InitStructure.TB_CounterMode = TB_CounterMode_Down;

        TB_InitStructure.TB_Prescaler = portPRESCALE - 1;

        TB_InitStructure.TB_AutoReload = ( ( configCPU_CLOCK_HZ / portPRESCALE ) / configTICK_RATE_HZ );

        TB_Init(&TB_InitStructure);

        /* Enable TB Update interrupt */

        TB_ITConfig(TB_IT_Update, ENABLE);

        /* Clear TB Update interrupt pending bit */

        TB_ClearITPendingBit(TB_IT_Update);

        /* Enable TB */

        TB_Cmd(ENABLE);

}

/*-----------------------------------------------------------*/