URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [m68k/] [efi68k/] [console/] [console.c] - Blame information for rev 415

Go to most recent revision | Details | Compare with Previous | View Log


/*
 *  This file contains the efi68k console IO package.
 *
 *  COPYRIGHT (c) 1989-1999.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  $Id: console.c,v 1.2 2001-09-27 12:00:03 chris Exp $
 */
 
#include <stdlib.h>
#include <bsp.h>
#include <rtems/libio.h>
 
 
#define BAUD 38400
#define CLK_FREQ 8000000.0
 
/* BUFFER_LENGTH must be 2^n for n=1, 2, 3, .... */
#define BUFFER_LENGTH 256
#define RTS_STOP_SIZE BUFFER_LENGTH-64
#define RTS_START_SIZE 16
 
char xmt_buf[BUFFER_LENGTH];
char rcv_buf[BUFFER_LENGTH];
/* in: last entry into the buffer; always on a valid character */
/* out: points to the next character to be pull from the buffer */
/*    in+1=out => buffer empty */
/*    in+2=out => buffer full */
struct UART_buf {
  char *offset;
  char *in;
  char *out;
};
static volatile struct UART_buf  xmt = { xmt_buf, (char *)0, (char *)1};
static volatile struct UART_buf  rcv = { rcv_buf, (char *)0, (char *)1};
static volatile char _debug_flag = 0;
static volatile char _tx_stop = 0;
 
/* _catchUARTint is the interrupt front-end */
extern void _catchUARTint();
asm("   .text
        .align 2
        .globl _catchUARTint
_catchUARTint:
        lea    %sp@(4),%sp                /* pop return address */
        moveml %d0-%d7/%a0-%a6,%sp@-       /* save registers */
        jbsr    uart_interrupt
        moveml  %sp@+,%d0-%d7/%a0-%a6
        rte
    ");
 
/* _fake_trap_1 will continue the UART interrupt (%sr *still*
   UART_ISR_LEVEL) as a trap #1 to enter the debugger */
asm("   .text
        .align 2
_fake_trap_1:
        unlk %a6                /* clear interrupt frame */
        lea %sp@(4),%sp         /* remove jbsr instruction */
        moveml %sp@+,%d0-%d7/%a0-%a6 /* pop registers */
        jmp (33*6-12+_VBR)      /* jump exception 1 */
        ");
 
/* dispatch UART interrupt */
void xmit_interrupt(void);
void rcvr_interrupt(void);
void modem_status(void);
void _fake_trap_1(void);
void uart_interrupt(void) {
  register char a;
 
  a=*IIR & (NIP | IID_MASK); /* read interrupt id register */
  switch (a) {
  case 0x04: case 0x0c:
    rcvr_interrupt();
    break;
  case 0x02:
    xmit_interrupt();
    break;
  case 0x00:
    modem_status();
    break;
  default:
    break;
  }
  if (_debug_flag) {
    _debug_flag = 0;             /* reset the flag */
    _fake_trap_1();             /* fake a trap #1 */
  }
}
 
/* transfer received character to the buffer */
void rcvr_interrupt(void) {
  register char *a, c;
  register int length;
 
  while ( (*LSR & DR) != 0) {
    if ((c=*RBR) == 0x1a)       /* use ctl-z to reboot */
      reboot();
    else if (c == 0x03) {       /* use ctl-c to enter debugger */
      _debug_flag = 1;
      continue;
    }
    *(char *)((int)rcv.offset +(int)
              (a=(char *)(((int)rcv.in+1) & ((int)BUFFER_LENGTH-1)))) = c;
    if ((char *)(((int)rcv.in+2) & ((int)BUFFER_LENGTH-1)) != rcv.out)
      rcv.in=a;
  }
  length = (BUFFER_LENGTH -1) & (
    ( ((int)rcv.out <= (int)rcv.in) ? 0 : BUFFER_LENGTH) - (int)rcv.out
    + (int)rcv.in + 1);
  if (length >= RTS_STOP_SIZE)
    *MCR &= (char) (~RTS);
}
 
/* tranfer buffered characters to the UART */
void xmit_interrupt(void) {
  register short int i, oldsr;
 
  _CPU_ISR_Disable( oldsr ); /* for when outbyte calls */
  if ( (*LSR & THRE) != 0 && _tx_stop == 0 )
    for (i=0;i<16;i++) {
      if ((char *)(((int)xmt.in+1) & ((int)BUFFER_LENGTH-1))== xmt.out)
        break;
      *THR=*(char *)((int)xmt.offset+(int)xmt.out);
      xmt.out= (char *)(((int)xmt.out+1) & ((int)BUFFER_LENGTH-1));
    }
  _CPU_ISR_Enable( oldsr );
}
 
void modem_status(void) {
  register char a;
 
  if ( ((a=*MDSR) & DCTS) != 0 )
    if ( (a & CTS) == 0)
      _tx_stop = 1;
    else {
      _tx_stop = 0;
      xmit_interrupt();
    }
}
 
/* transfer character from the buffer */
char inbyte(void) {
  register char a;
  register int length;
 
  while ((char *)(((int)rcv.in+1) & ((int)BUFFER_LENGTH-1))== rcv.out);
  a=*(char *)((int)rcv.offset+(int)rcv.out);
  rcv.out= (char *)(((int)rcv.out+1) & ((int)BUFFER_LENGTH-1));
  length = (BUFFER_LENGTH -1) & (
    ( ((int)rcv.out <= (int)rcv.in) ? 0 : BUFFER_LENGTH) - (int)rcv.out
    + (int)rcv.in + 1);
  if (length < RTS_START_SIZE)
    *MCR |= (char) RTS;
  return (a);
}
 
/* once room is avaliable in the buffer, transfer
   the character into the buffer and enable
   the xmtr interrupt */
void outbyte(char c) {
  register char *a;
 
  while ((char *)(((int)xmt.in+2) & ((int)BUFFER_LENGTH-1)) == xmt.out);
  *(char *)((int)xmt.offset+(int)
            (a=(char *)(((int)xmt.in+1) & ((int)BUFFER_LENGTH-1))))=c;
  xmt.in=a;
 
  if ( (*LSR & THRE) != 0 )      /* if THRE, uart has already interrupted */
    xmit_interrupt();           /*   and was ignored. Need to restart. */
}
 
void _UART_flush(void) {
  /* loop till xmt buffer empty. Works with interrupts disabled */
  while ((char *)(((int)xmt.in+1) & ((int)BUFFER_LENGTH-1)) != xmt.out)
    xmit_interrupt();
  /* loop till UART buffer empty */
  while ( (*LSR & TEMT) == 0 );
}
 
/*  console_initialize
 *
 *  This routine initializes the console IO driver.
 *
 *  Input parameters: NONE
 *
 *  Output parameters:  NONE
 *
 *  Return values:
 */
 
void console_init()
{
  /* set clock divisor */
  *LCR = (char)(DLAB);
  *DLL = (char)((int)(CLK_FREQ/BAUD/16.0+0.5) & 0xFF);
  *DLM = (char)(((int)(CLK_FREQ/BAUD/16.0+0.5) & 0xFF00) >> 8);
 
  /* Line control setup */
  *LCR = (char)(WL_8 | NSB);
 
  /* Interrupt setup */
  *IER = (char) 0x0b;           /* enable transmit, receive, modem stat int */
 
  /* FIFO setup */
  *FCR = (char)(FIFO_E | 0xc0);
 
  /* Modem control setup */
  *MCR = (char) RTS;
 
  /* init tx_stop with CTS */
  _tx_stop = ( (*MDSR & CTS) ? 0 : 1);
 
  set_vector(_catchUARTint, UART_ISR_LEVEL+24, 0);
}
 
rtems_device_driver console_initialize(
  rtems_device_major_number  major,
  rtems_device_minor_number  minor,
  void                      *arg
)
{
  rtems_status_code status;
 
  status = rtems_io_register_name(
    "/dev/console",
    major,
    (rtems_device_minor_number) 0
  );
 
  if (status != RTEMS_SUCCESSFUL)
    rtems_fatal_error_occurred(status);
 
  return RTEMS_SUCCESSFUL;
 
}
 
 
/*  is_character_ready
 *
 *  This routine returns TRUE if a character is available.
 *
 *  Input parameters: NONE
 *
 *  Output parameters:  NONE
 *
 *  Return values:
 */
 
rtems_boolean is_character_ready(
  char *ch
)
{
  if ((char *)(((int)rcv.in+1) & ((int)BUFFER_LENGTH-1))== rcv.out)
    return(FALSE);
  else
    return(TRUE);
}
 
/*
 *  Open entry point
 */
 
rtems_device_driver console_open(
  rtems_device_major_number major,
  rtems_device_minor_number minor,
  void                    * arg
)
{
  return RTEMS_SUCCESSFUL;
}
 
/*
 *  Close entry point
 */
 
rtems_device_driver console_close(
  rtems_device_major_number major,
  rtems_device_minor_number minor,
  void                    * arg
)
{
  return RTEMS_SUCCESSFUL;
}
 
/*
 * read bytes from the serial port. We only have stdin.
 */
 
rtems_device_driver console_read(
  rtems_device_major_number major,
  rtems_device_minor_number minor,
  void                    * arg
)
{
  rtems_libio_rw_args_t *rw_args;
  char *buffer;
  int maximum;
  int count = 0;
 
  rw_args = (rtems_libio_rw_args_t *) arg;
 
  buffer = rw_args->buffer;
  maximum = rw_args->count;
 
  for (count = 0; count < maximum; count++) {
    buffer[ count ] = inbyte();
    if (buffer[ count ] == '\n' || buffer[ count ] == '\r') {
      buffer[ count++ ]  = '\n';
      break;
    }
  }
 
  rw_args->bytes_moved = count;
  return (count >= 0) ? RTEMS_SUCCESSFUL : RTEMS_UNSATISFIED;
}
 
/*
 * write bytes to the serial port. Stdout and stderr are the same.
 */
 
rtems_device_driver console_write(
  rtems_device_major_number major,
  rtems_device_minor_number minor,
  void                    * arg
)
{
  int count;
  int maximum;
  rtems_libio_rw_args_t *rw_args;
  char *buffer;
 
  rw_args = (rtems_libio_rw_args_t *) arg;
 
  buffer = rw_args->buffer;
  maximum = rw_args->count;
 
  for (count = 0; count < maximum; count++) {
    if ( buffer[ count ] == '\n') {
      outbyte('\r');
    }
    outbyte( buffer[ count ] );
  }
 
  rw_args->bytes_moved = maximum;
  return 0;
}
 
/*
 *  IO Control entry point
 */
 
rtems_device_driver console_control(
  rtems_device_major_number major,
  rtems_device_minor_number minor,
  void                    * arg
)
{
  return RTEMS_SUCCESSFUL;
}

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [m68k/] [efi68k/] [console/] [console.c] - Blame information for rev 415

Line No.	Rev	Author	Line
1	30	unneback	`/*`
2			`* This file contains the efi68k console IO package.`
3			`*`
4			`* COPYRIGHT (c) 1989-1999.`
5			`* On-Line Applications Research Corporation (OAR).`
6			`*`
7			`* The license and distribution terms for this file may be`
8			`* found in the file LICENSE in this distribution or at`
9			`* http://www.OARcorp.com/rtems/license.html.`
10			`*`
11			`* $Id: console.c,v 1.2 2001-09-27 12:00:03 chris Exp $`
12			`*/`
13
14			`#include <stdlib.h>`
15			`#include <bsp.h>`
16			`#include <rtems/libio.h>`
17
18
19			`#define BAUD 38400`
20			`#define CLK_FREQ 8000000.0`
21
22			`/* BUFFER_LENGTH must be 2^n for n=1, 2, 3, .... */`
23			`#define BUFFER_LENGTH 256`
24			`#define RTS_STOP_SIZE BUFFER_LENGTH-64`
25			`#define RTS_START_SIZE 16`
26
27			`char xmt_buf[BUFFER_LENGTH];`
28			`char rcv_buf[BUFFER_LENGTH];`
29			`/* in: last entry into the buffer; always on a valid character */`
30			`/* out: points to the next character to be pull from the buffer */`
31			`/* in+1=out => buffer empty */`
32			`/* in+2=out => buffer full */`
33			`struct UART_buf {`
34			`char *offset;`
35			`char *in;`
36			`char *out;`
37			`};`
38			`static volatile struct UART_buf xmt = { xmt_buf, (char )0, (char )1};`
39			`static volatile struct UART_buf rcv = { rcv_buf, (char )0, (char )1};`
40			`static volatile char _debug_flag = 0;`
41			`static volatile char _tx_stop = 0;`
42
43			`/* _catchUARTint is the interrupt front-end */`
44			`extern void _catchUARTint();`
45			`asm(" .text`
46			`.align 2`
47			`.globl _catchUARTint`
48			`_catchUARTint:`
49			`lea %sp@(4),%sp /* pop return address */`
50			`moveml %d0-%d7/%a0-%a6,%sp@- /* save registers */`
51			`jbsr uart_interrupt`
52			`moveml %sp@+,%d0-%d7/%a0-%a6`
53			`rte`
54			`");`
55
56			`/* _fake_trap_1 will continue the UART interrupt (%sr still`
57			`UART_ISR_LEVEL) as a trap #1 to enter the debugger */`
58			`asm(" .text`
59			`.align 2`
60			`_fake_trap_1:`
61			`unlk %a6 /* clear interrupt frame */`
62			`lea %sp@(4),%sp /* remove jbsr instruction */`
63			`moveml %sp@+,%d0-%d7/%a0-%a6 /* pop registers */`
64			`jmp (336-12+_VBR) / jump exception 1 */`
65			`");`
66
67			`/* dispatch UART interrupt */`
68			`void xmit_interrupt(void);`
69			`void rcvr_interrupt(void);`
70			`void modem_status(void);`
71			`void _fake_trap_1(void);`
72			`void uart_interrupt(void) {`
73			`register char a;`
74
75			`a=IIR & (NIP \| IID_MASK); / read interrupt id register */`
76			`switch (a) {`
77			`case 0x04: case 0x0c:`
78			`rcvr_interrupt();`
79			`break;`
80			`case 0x02:`
81			`xmit_interrupt();`
82			`break;`
83			`case 0x00:`
84			`modem_status();`
85			`break;`
86			`default:`
87			`break;`
88			`}`
89			`if (_debug_flag) {`
90			`_debug_flag = 0; /* reset the flag */`
91			`_fake_trap_1(); /* fake a trap #1 */`
92			`}`
93			`}`
94
95			`/* transfer received character to the buffer */`
96			`void rcvr_interrupt(void) {`
97			`register char *a, c;`
98			`register int length;`
99
100			`while ( (*LSR & DR) != 0) {`
101			`if ((c=RBR) == 0x1a) / use ctl-z to reboot */`
102			`reboot();`
103			`else if (c == 0x03) { /* use ctl-c to enter debugger */`
104			`_debug_flag = 1;`
105			`continue;`
106			`}`
107			`(char )((int)rcv.offset +(int)`
108			`(a=(char *)(((int)rcv.in+1) & ((int)BUFFER_LENGTH-1)))) = c;`
109			`if ((char *)(((int)rcv.in+2) & ((int)BUFFER_LENGTH-1)) != rcv.out)`
110			`rcv.in=a;`
111			`}`
112			`length = (BUFFER_LENGTH -1) & (`
113			`( ((int)rcv.out <= (int)rcv.in) ? 0 : BUFFER_LENGTH) - (int)rcv.out`
114			`+ (int)rcv.in + 1);`
115			`if (length >= RTS_STOP_SIZE)`
116			`*MCR &= (char) (~RTS);`
117			`}`
118
119			`/* tranfer buffered characters to the UART */`
120			`void xmit_interrupt(void) {`
121			`register short int i, oldsr;`
122
123			`_CPU_ISR_Disable( oldsr ); /* for when outbyte calls */`
124			`if ( (*LSR & THRE) != 0 && _tx_stop == 0 )`
125			`for (i=0;i<16;i++) {`
126			`if ((char *)(((int)xmt.in+1) & ((int)BUFFER_LENGTH-1))== xmt.out)`
127			`break;`
128			`THR=(char *)((int)xmt.offset+(int)xmt.out);`
129			`xmt.out= (char *)(((int)xmt.out+1) & ((int)BUFFER_LENGTH-1));`
130			`}`
131			`_CPU_ISR_Enable( oldsr );`
132			`}`
133
134			`void modem_status(void) {`
135			`register char a;`
136
137			`if ( ((a=*MDSR) & DCTS) != 0 )`
138			`if ( (a & CTS) == 0)`
139			`_tx_stop = 1;`
140			`else {`
141			`_tx_stop = 0;`
142			`xmit_interrupt();`
143			`}`
144			`}`
145
146			`/* transfer character from the buffer */`
147			`char inbyte(void) {`
148			`register char a;`
149			`register int length;`
150
151			`while ((char *)(((int)rcv.in+1) & ((int)BUFFER_LENGTH-1))== rcv.out);`
152			`a=(char )((int)rcv.offset+(int)rcv.out);`
153			`rcv.out= (char *)(((int)rcv.out+1) & ((int)BUFFER_LENGTH-1));`
154			`length = (BUFFER_LENGTH -1) & (`
155			`( ((int)rcv.out <= (int)rcv.in) ? 0 : BUFFER_LENGTH) - (int)rcv.out`
156			`+ (int)rcv.in + 1);`
157			`if (length < RTS_START_SIZE)`
158			`*MCR \|= (char) RTS;`
159			`return (a);`
160			`}`
161
162			`/* once room is avaliable in the buffer, transfer`
163			`the character into the buffer and enable`
164			`the xmtr interrupt */`
165			`void outbyte(char c) {`
166			`register char *a;`
167
168			`while ((char *)(((int)xmt.in+2) & ((int)BUFFER_LENGTH-1)) == xmt.out);`
169			`(char )((int)xmt.offset+(int)`
170			`(a=(char *)(((int)xmt.in+1) & ((int)BUFFER_LENGTH-1))))=c;`
171			`xmt.in=a;`
172
173			`if ( (LSR & THRE) != 0 ) / if THRE, uart has already interrupted */`
174			`xmit_interrupt(); /* and was ignored. Need to restart. */`
175			`}`
176
177			`void _UART_flush(void) {`
178			`/* loop till xmt buffer empty. Works with interrupts disabled */`
179			`while ((char *)(((int)xmt.in+1) & ((int)BUFFER_LENGTH-1)) != xmt.out)`
180			`xmit_interrupt();`
181			`/* loop till UART buffer empty */`
182			`while ( (*LSR & TEMT) == 0 );`
183			`}`
184
185			`/* console_initialize`
186			`*`
187			`* This routine initializes the console IO driver.`
188			`*`
189			`* Input parameters: NONE`
190			`*`
191			`* Output parameters: NONE`
192			`*`
193			`* Return values:`
194			`*/`
195
196			`void console_init()`
197			`{`
198			`/* set clock divisor */`
199			`*LCR = (char)(DLAB);`
200			`*DLL = (char)((int)(CLK_FREQ/BAUD/16.0+0.5) & 0xFF);`
201			`*DLM = (char)(((int)(CLK_FREQ/BAUD/16.0+0.5) & 0xFF00) >> 8);`
202
203			`/* Line control setup */`
204			`*LCR = (char)(WL_8 \| NSB);`
205
206			`/* Interrupt setup */`
207			`IER = (char) 0x0b; / enable transmit, receive, modem stat int */`
208
209			`/* FIFO setup */`
210			`*FCR = (char)(FIFO_E \| 0xc0);`
211
212			`/* Modem control setup */`
213			`*MCR = (char) RTS;`
214
215			`/* init tx_stop with CTS */`
216			`_tx_stop = ( (*MDSR & CTS) ? 0 : 1);`
217
218			`set_vector(_catchUARTint, UART_ISR_LEVEL+24, 0);`
219			`}`
220
221			`rtems_device_driver console_initialize(`
222			`rtems_device_major_number major,`
223			`rtems_device_minor_number minor,`
224			`void *arg`
225			`)`
226			`{`
227			`rtems_status_code status;`
228
229			`status = rtems_io_register_name(`
230			`"/dev/console",`
231			`major,`
232			`(rtems_device_minor_number) 0`
233			`);`
234
235			`if (status != RTEMS_SUCCESSFUL)`
236			`rtems_fatal_error_occurred(status);`
237
238			`return RTEMS_SUCCESSFUL;`
239
240			`}`
241
242
243			`/* is_character_ready`
244			`*`
245			`* This routine returns TRUE if a character is available.`
246			`*`
247			`* Input parameters: NONE`
248			`*`
249			`* Output parameters: NONE`
250			`*`
251			`* Return values:`
252			`*/`
253
254			`rtems_boolean is_character_ready(`
255			`char *ch`
256			`)`
257			`{`
258			`if ((char *)(((int)rcv.in+1) & ((int)BUFFER_LENGTH-1))== rcv.out)`
259			`return(FALSE);`
260			`else`
261			`return(TRUE);`
262			`}`
263
264			`/*`
265			`* Open entry point`
266			`*/`
267
268			`rtems_device_driver console_open(`
269			`rtems_device_major_number major,`
270			`rtems_device_minor_number minor,`
271			`void * arg`
272			`)`
273			`{`
274			`return RTEMS_SUCCESSFUL;`
275			`}`
276
277			`/*`
278			`* Close entry point`
279			`*/`
280
281			`rtems_device_driver console_close(`
282			`rtems_device_major_number major,`
283			`rtems_device_minor_number minor,`
284			`void * arg`
285			`)`
286			`{`
287			`return RTEMS_SUCCESSFUL;`
288			`}`
289
290			`/*`
291			`* read bytes from the serial port. We only have stdin.`
292			`*/`
293
294			`rtems_device_driver console_read(`
295			`rtems_device_major_number major,`
296			`rtems_device_minor_number minor,`
297			`void * arg`
298			`)`
299			`{`
300			`rtems_libio_rw_args_t *rw_args;`
301			`char *buffer;`
302			`int maximum;`
303			`int count = 0;`
304
305			`rw_args = (rtems_libio_rw_args_t *) arg;`
306
307			`buffer = rw_args->buffer;`
308			`maximum = rw_args->count;`
309
310			`for (count = 0; count < maximum; count++) {`
311			`buffer[ count ] = inbyte();`
312			`if (buffer[ count ] == '\n' \|\| buffer[ count ] == '\r') {`
313			`buffer[ count++ ] = '\n';`
314			`break;`
315			`}`
316			`}`
317
318			`rw_args->bytes_moved = count;`
319			`return (count >= 0) ? RTEMS_SUCCESSFUL : RTEMS_UNSATISFIED;`
320			`}`
321
322			`/*`
323			`* write bytes to the serial port. Stdout and stderr are the same.`
324			`*/`
325
326			`rtems_device_driver console_write(`
327			`rtems_device_major_number major,`
328			`rtems_device_minor_number minor,`
329			`void * arg`
330			`)`
331			`{`
332			`int count;`
333			`int maximum;`
334			`rtems_libio_rw_args_t *rw_args;`
335			`char *buffer;`
336
337			`rw_args = (rtems_libio_rw_args_t *) arg;`
338
339			`buffer = rw_args->buffer;`
340			`maximum = rw_args->count;`
341
342			`for (count = 0; count < maximum; count++) {`
343			`if ( buffer[ count ] == '\n') {`
344			`outbyte('\r');`
345			`}`
346			`outbyte( buffer[ count ] );`
347			`}`
348
349			`rw_args->bytes_moved = maximum;`
350			`return 0;`
351			`}`
352
353			`/*`
354			`* IO Control entry point`
355			`*/`
356
357			`rtems_device_driver console_control(`
358			`rtems_device_major_number major,`
359			`rtems_device_minor_number minor,`
360			`void * arg`
361			`)`
362			`{`
363			`return RTEMS_SUCCESSFUL;`
364			`}`