Subversion Repositories simple_spi

/////////////////////////////////////////////////////////////////////

////                                                             ////

////  SPI Slave Model                                            ////

////                                                             ////

////  Authors: Richard Herveille (richard@asics.ws) www.asics.ws ////

////                                                             ////

////  http://www.opencores.org/projects/simple_spi/              ////

////                                                             ////

/////////////////////////////////////////////////////////////////////

////                                                             ////

//// Copyright (C) 2004 Richard Herveille                        ////

////                         richard@asics.ws                    ////

////                                                             ////

//// This source file may be used and distributed without        ////

//// restriction provided that this copyright statement is not   ////

//// removed from the file and that any derivative work contains ////

//// the original copyright notice and the associated disclaimer.////

////                                                             ////

////     THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY     ////

//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   ////

//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   ////

//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR      ////

//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,         ////

//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES    ////

//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE   ////

//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR        ////

//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  ////

//// LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT  ////

//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  ////

//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE         ////

//// POSSIBILITY OF SUCH DAMAGE.                                 ////

////                                                             ////

/////////////////////////////////////////////////////////////////////

//  CVS Log

//

//  $Id: spi_slave_model.v,v 1.1 2004-02-28 16:01:47 rherveille Exp $

//

//  $Date: 2004-02-28 16:01:47 $

//  $Revision: 1.1 $

//  $Author: rherveille $

//  $Locker:  $

//  $State: Exp $

//

// Change History:

//               $Log: not supported by cvs2svn $

//

//

//

// Requires: Verilog2001

`include "timescale.v"

module spi_slave_model (

        input  wire csn;

        input  wire sck

        input  wire di;

        output wire do

);

        //

        // Variable declaration

        //

        wire debug = 1'b1;

        wire cpol = 1'b0;

        wire cpha  = 1'b0;

        reg [7:0] mem [7:0]; // initiate memory

        reg [2:0] mem_adr;   // memory address

        reg [7:0] mem_do;    // memory data output

        reg [7:0] sri, sro;  // 8bit shift register

        reg [2:0] bit_cnt;

        reg       ld;

        wire clk;

        //

        // module body

        //

        assign clk = cpol ^ cpha ^ sck;

        // generate shift registers

        always @(posedge clk)

          sri <= #1 {sri[6:0],di};

        always @(posedge clk)

          if (&bit_cnt)

            sro <= #1 mem[mem_adr];

          else

            sro <= #1 {sro[6:0],1'bx};

        assign do = sro[7];

        //generate bit-counter

        always @(posedge clk, posedge csn)

          if(csn)

            bit_cnt <= #1 3'b111;

          else

            bit_cnt <= #1 bit_cnt - 3'h1;

        //generate access done signal

        always @(posedge clk)

          ld <= #1 ~(|bit_cnt);

        always @(negedge clk)

          if (ld) begin

            mem[mem_adr] <= #1 sri;

            mem_adr      <= #1 mem_adr + 1'b1;

          end

        initial

        begin

          bit_cnt=3'b111;

          mem_adr = 0;

          sro = mem[mem_adr];

        end

endmodule