Subversion Repositories uart16750

-- UART transactor

--

-- Author:   Sebastian Witt

-- Date:     03.02.2008

-- Version:  1.0

--

-- This code is free software; you can redistribute it and/or

-- modify it under the terms of the GNU Lesser General Public

-- License as published by the Free Software Foundation; either

-- version 2.1 of the License, or (at your option) any later version.

--

-- This code is distributed in the hope that it will be useful,

-- but WITHOUT ANY WARRANTY; without even the implied warranty of

-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

-- Lesser General Public License for more details.

--

-- You should have received a copy of the GNU Lesser General Public

-- License along with this library; if not, write to the

-- Free Software  Foundation, Inc., 59 Temple Place, Suite 330,

-- Boston, MA  02111-1307  USA

--

LIBRARY IEEE;

USE IEEE.std_logic_1164.all;

use std.textio.all;

use work.uart_package.all;

use work.txt_util.all;

entity uart_transactor is

    generic (

                stim_file    : string := "sim/uart_stim.dat";    -- Stimulus input file

                log_file     : string := "sim/uart_log.txt"      -- Log file

            );

end uart_transactor;

architecture tb of uart_transactor is

    file stimulus : TEXT open read_mode is stim_file;           -- Open stimulus file for read

    file log      : TEXT open write_mode is log_file;           -- Open log file for write

    -- The DUT

    component uart_16750 is

    port (

        CLK         : in std_logic;                             -- Clock

        RST         : in std_logic;                             -- Reset

        BAUDCE      : in std_logic;                             -- Baudrate generator clock enable

        CS          : in std_logic;                             -- Chip select

        WR          : in std_logic;                             -- Write to UART

        RD          : in std_logic;                             -- Read from UART

        A           : in std_logic_vector(2 downto 0);          -- Register select

        DIN         : in std_logic_vector(7 downto 0);          -- Data bus input

        DOUT        : out std_logic_vector(7 downto 0);         -- Data bus output

        DDIS        : out std_logic;                            -- Driver disable

        INT         : out std_logic;                            -- Interrupt output

        OUT1N       : out std_logic;                            -- Output 1

        OUT2N       : out std_logic;                            -- Output 2

        RCLK        : in std_logic;                             -- Receiver clock (16x baudrate)

        BAUDOUTN    : out std_logic;                            -- Baudrate generator output (16x baudrate)

        RTSN        : out std_logic;                            -- RTS output

        DTRN        : out std_logic;                            -- DTR output

        CTSN        : in std_logic;                             -- CTS input

        DSRN        : in std_logic;                             -- DSR input

        DCDN        : in std_logic;                             -- DCD input

        RIN         : in std_logic;                             -- RI input

        SIN         : in std_logic;                             -- Receiver input

        SOUT        : out std_logic                             -- Transmitter output

    );

    end component;

    component slib_clock_div is

        generic (

            RATIO       : integer := 18     -- Clock divider ratio

        );

        port (

            CLK         : in std_logic;     -- Clock

            RST         : in std_logic;     -- Reset

            CE          : in std_logic;     -- Clock enable input

            Q           : out std_logic     -- New clock enable output

        );

    end component;

    -- DUT signals

    signal clk, rst                 : std_logic;

    signal uart_if                  : uart_interface;

    signal dout                     : std_logic_vector (7 downto 0);

    signal ddis, int                : std_logic;

    signal baudce, rclk, baudoutn   : std_logic;

    signal out1n, out2n, rtsn, dtrn, ctsn, dsrn, dcdn, rin, sin, sout : std_logic;

    constant cycle : time := 30 ns;

begin

    -- Main clock

    CLOCK: process

    begin

        clk <= '0';

        wait for cycle/2;

        clk <= '1';

        wait for cycle/2;

    end process;

    -- Baudrate generator clock enable

    BGCE: slib_clock_div generic map (RATIO => 18) port map (clk, rst, '1', baudce);

    rclk <= baudoutn;

    -- Pull-up

    --uart_if.data <= (others => 'H');

    -- UART interface bus tri-state buffer

    LPCBUF: process (ddis, dout)

    begin

        if (ddis = '0') then

            uart_if.data <= dout;

        else

            uart_if.data <= (others => 'Z');

        end if;

    end process;

    DUT: uart_16750 port map (  CLK     => CLK,

                                RST     => RST,

                                BAUDCE  => BAUDCE,

                                CS      => uart_if.cs,

                                WR      => uart_if.wr,

                                RD      => uart_if.rd,

                                A       => uart_if.a,

                                DIN     => uart_if.data,

                                DOUT    => dout,

                                DDIS    => ddis,

                                INT     => int,

                                OUT1N   => out1n,

                                OUT2N   => out2n,

                                RCLK    => rclk,

                                BAUDOUTN=> baudoutn,

                                RTSN    => rtsn,

                                DTRN    => dtrn,

                                CTSN    => ctsn,

                                DSRN    => dsrn,

                                DCDN    => dcdn,

                                RIN     => rin,

                                SIN     => sin,

                                SOUT    => sout

                             );

    -- Main transaction process

    TRANPROC: process

        variable s          : string(1 to 100);

        variable address    : std_logic_vector(2 downto 0);

        variable data       : std_logic_vector(7 downto 0);

        variable data2      : std_logic_vector(7 downto 0);

    begin

        -- Default values

        rst  <= '1';

        ctsn <= '1';

        dsrn <= '1';

        dcdn <= '1';

        rin  <= '1';

        sin  <= '1';

        uart_if.a    <= (others => '0');

        uart_if.data <= (others => 'Z');

        uart_if.cs   <= '0';

        uart_if.rd   <= '0';

        uart_if.wr   <= '0';

        wait until falling_edge(clk);

        -- Get commands from stimulus file

        while not endfile(stimulus) loop

            str_read(stimulus, s);                                  -- Read line into string

            if (s(1 to 4) = "#SET") then                            -- Set values

                                                                    -- Format: RSTN CTSN DSRN DCDN RIN

                rst          <= to_std_logic(s(6));

                --CTSN         <= to_std_logic(s(8));

                --DSRN         <= to_std_logic(s(10));

                --DCDN         <= to_std_logic(s(12));

                --RIN          <= to_std_logic(s(14));

            elsif (s(1 to 5) = "#WAIT") then                        -- Wait n cycles

                wait for integer'value(s(7 to 12))*cycle;

            elsif (s(1 to 3) = "#RD") then                          -- Read from UART and compare

                address := to_std_logic_vector(s(5 to 7));

                data := to_std_logic_vector(s(9 to 16));

                uart_read (uart_if, address, data2, log);

                if (not compare(data, data2)) then

                    print (log, time'image(now) & ": " & "Failed: Expected 0x" & hstr(data) & " got 0x" & hstr(data2));

                end if;

            elsif (s(1 to 3) = "#WR") then                          -- Write to LPC

                address := to_std_logic_vector(s(5 to 7));

                data := to_std_logic_vector(s(9 to 16));

                uart_write (uart_if, address, data, log);

            elsif (s(1 to 4) = "#LOG") then                         -- Write message to log

                print (log, time'image(now) & ": " & s(6 to 80));

            elsif (s(1 to 4) = "#CUO") then                         -- Check UART outputs INT OUT1N OUT2N RTSN DTRN

                data2(4 downto 0) := to_std_logic_vector(s(6 to 10));

                data(4 downto 0) := INT & OUT1N & OUT2N & RTSN & DTRN;

                if (not compare(data(3 downto 0), data2(3 downto 0))) then

                    print (log, time'image(now) & ": " & "UART outputs failed: Expected " &

                    str(data2(4 downto 0)) & " got " & str(data(4 downto 0)));

                else

                    print (log, time'image(now) & ": " & "UART outputs: " & str(data(4 downto 0)));

                end if;

            else

                print ("Unknown command: " & s);

            end if;

        end loop;

        wait;

    end process;

end tb;