Subversion Repositories ao486

#------------------------------------------------------------------------------

#                       BSP "PUBLIC" MAKEFILE CONTENT

#

# This file is intended to be included in an application or library

# Makefile that is using this BSP. You can create such a Makefile with

# the nios2-app-generate-makefile or nios2-lib-generate-makefile

# commands.

#

# The following variables must be defined before including this file:

#

#     ALT_LIBRARY_ROOT_DIR

#         Contains the path to the BSP top-level (aka root) directory

#------------------------------------------------------------------------------

#------------------------------------------------------------------------------

#                                  PATHS

#------------------------------------------------------------------------------

# Path to the provided linker script.

BSP_LINKER_SCRIPT := $(ALT_LIBRARY_ROOT_DIR)/linker.x

# Include paths:

# The path to root of all header files that a library wishes to make

# available for an application's use is specified here. Note that this

# may not be *all* folders within a hierarchy. For example, if it is

# desired that the application developer type:

#   #include 

#   #include 

# With files laid out like this:

#   /inc/sockets.h

#   /inc/ip/tcpip.h

#

# Then, only /inc need be added to the list of include

# directories. Alternatively, if you wish to be able to directly include

# all files in a hierarchy, separate paths to each folder in that

# hierarchy must be defined.

# The following are the "base" set of include paths for a BSP.

# These paths are appended to the list that individual software

# components, drivers, etc., add in the generated portion of this

# file (below).

ALT_INCLUDE_DIRS_TO_APPEND += \

        $(ALT_LIBRARY_ROOT_DIR) \

        $(ALT_LIBRARY_ROOT_DIR)/drivers/inc

# Additions to linker library search-path:

# Here we provide a path to "our self" for the application to construct a

# "-L " out of. This should contain a list of directories,

# relative to the library root, of all directories with .a files to link

# against.

ALT_LIBRARY_DIRS += $(ALT_LIBRARY_ROOT_DIR)

#------------------------------------------------------------------------------

#                               COMPILATION FLAGS

#------------------------------------------------------------------------------

# Default C pre-processor flags for a BSP:

ALT_CPPFLAGS += -DSYSTEM_BUS_WIDTH=32 \

                -pipe

#------------------------------------------------------------------------------

#                              MANAGED CONTENT

#

# All content between the lines "START MANAGED" and "END MANAGED" below is

# generated based on variables in the BSP settings file when the

# nios2-bsp-generate-files command is invoked. If you wish to persist any

# information pertaining to the build process, it is recomended that you

# utilize the BSP settings mechanism to do so.

#------------------------------------------------------------------------------

#START MANAGED

# The following TYPE comment allows tools to identify the 'type' of target this

# makefile is associated with.

# TYPE: BSP_PUBLIC_MAKEFILE

# This following VERSION comment indicates the version of the tool used to

# generate this makefile. A makefile variable is provided for VERSION as well.

# ACDS_VERSION: 14.0

ACDS_VERSION := 14.0

# This following BUILD_NUMBER comment indicates the build number of the tool

# used to generate this makefile.

# BUILD_NUMBER: 200

# Qsys--generated SOPCINFO file. Required for resolving node instance ID's with

# design component names.

SOPCINFO_FILE := $(ABS_BSP_ROOT_DIR)/../../system.sopcinfo

# Big-Endian operation.

# setting BIG_ENDIAN is false

# Path to the provided C language runtime initialization code.

BSP_CRT0 := $(ALT_LIBRARY_ROOT_DIR)/obj/HAL/src/crt0.o

# Name of BSP library as provided to linker using the "-msys-lib" flag or

# linker script GROUP command.

# setting BSP_SYS_LIB is hal_bsp

BSP_SYS_LIB := hal_bsp

ELF_PATCH_FLAG  += --thread_model hal

# Type identifier of the BSP library

# setting BSP_TYPE is hal

ALT_CPPFLAGS += -D__hal__

BSP_TYPE := hal

# CPU Name

# setting CPU_NAME is nios2_qsys_0

CPU_NAME = nios2_qsys_0

ELF_PATCH_FLAG  += --cpu_name $(CPU_NAME)

# Hardware Divider present.

# setting HARDWARE_DIVIDE is false

ALT_CFLAGS += -mno-hw-div

# Hardware Multiplier present.

# setting HARDWARE_MULTIPLY is false

ALT_CFLAGS += -mno-hw-mul

# Hardware Mulx present.

# setting HARDWARE_MULX is false

ALT_CFLAGS += -mno-hw-mulx

# Debug Core present.

# setting HAS_DEBUG_CORE is true

CPU_HAS_DEBUG_CORE = 1

# Qsys generated design

# setting QSYS is 1

QSYS := 1

ELF_PATCH_FLAG += --qsys true

# Design Name

# setting SOPC_NAME is system

SOPC_NAME := system

# SopcBuilder Simulation Enabled

# setting SOPC_SIMULATION_ENABLED is false

ELF_PATCH_FLAG  += --simulation_enabled false

# Enable JTAG UART driver to recover when host is inactive causing buffer to

# full without returning error. Printf will not fail with this recovery. none

# setting altera_avalon_jtag_uart_driver.enable_jtag_uart_ignore_fifo_full_error is false

# Small-footprint (polled mode) driver none

# setting altera_avalon_jtag_uart_driver.enable_small_driver is false

# Build a custom version of newlib with the specified space-separated compiler

# flags. The custom newlib build will be placed in the /newlib

# directory, and will be used only for applications that utilize this BSP.

# setting hal.custom_newlib_flags is none

# Enable support for a subset of the C++ language. This option increases code

# footprint by adding support for C++ constructors. Certain features, such as

# multiple inheritance and exceptions are not supported. If false, adds

# -DALT_NO_C_PLUS_PLUS to ALT_CPPFLAGS in public.mk, and reduces code

# footprint. none

# setting hal.enable_c_plus_plus is false

ALT_CPPFLAGS += -DALT_NO_C_PLUS_PLUS

# When your application exits, close file descriptors, call C++ destructors,

# etc. Code footprint can be reduced by disabling clean exit. If disabled, adds

# -DALT_NO_CLEAN_EXIT to ALT_CPPFLAGS -D'exit(a)=_exit(a)' in public.mk. none

# setting hal.enable_clean_exit is true

# Add exit() support. This option increases code footprint if your "main()"

# routine does "return" or call "exit()". If false, adds -DALT_NO_EXIT to

# ALT_CPPFLAGS in public.mk, and reduces footprint none

# setting hal.enable_exit is true

# Causes code to be compiled with gprof profiling enabled and the application

# ELF to be linked with the GPROF library. If true, adds -DALT_PROVIDE_GMON to

# ALT_CPPFLAGS and -pg to ALT_CFLAGS in public.mk. none

# setting hal.enable_gprof is false

# Enables lightweight device driver API. This reduces code and data footprint

# by removing the HAL layer that maps device names (e.g. /dev/uart0) to file

# descriptors. Instead, driver routines are called directly. The open(),

# close(), and lseek() routines will always fail if called. The read(),

# write(), fstat(), ioctl(), and isatty() routines only work for the stdio

# devices. If true, adds -DALT_USE_DIRECT_DRIVERS to ALT_CPPFLAGS in public.mk.

# The Altera Host and read-only ZIP file systems can't be used if

# hal.enable_lightweight_device_driver_api is true.

# setting hal.enable_lightweight_device_driver_api is false

# Adds code to emulate multiply and divide instructions in case they are

# executed but aren't present in the CPU. Normally this isn't required because

# the compiler won't use multiply and divide instructions that aren't present

# in the CPU. If false, adds -DALT_NO_INSTRUCTION_EMULATION to ALT_CPPFLAGS in

# public.mk. none

# setting hal.enable_mul_div_emulation is false

ALT_CPPFLAGS += -DALT_NO_INSTRUCTION_EMULATION

# Certain drivers are compiled with reduced functionality to reduce code

# footprint. Not all drivers observe this setting. The altera_avalon_uart and

# altera_avalon_jtag_uart drivers switch from interrupt-driven to polled

# operation. CAUTION: Several device drivers are disabled entirely. These

# include the altera_avalon_cfi_flash, altera_avalon_epcs_flash_controller, and

# altera_avalon_lcd_16207 drivers. This can result in certain API (HAL flash

# access routines) to fail. You can define a symbol provided by each driver to

# prevent it from being removed. If true, adds -DALT_USE_SMALL_DRIVERS to

# ALT_CPPFLAGS in public.mk. none

# setting hal.enable_reduced_device_drivers is false

# Turns on HAL runtime stack checking feature. Enabling this setting causes

# additional code to be placed into each subroutine call to generate an

# exception if a stack collision occurs with the heap or statically allocated

# data. If true, adds -DALT_STACK_CHECK and -fstack-limit-register=et to

# ALT_CPPFLAGS in public.mk. none

# setting hal.enable_runtime_stack_checking is false

# The BSP is compiled with optimizations to speedup HDL simulation such as

# initializing the cache, clearing the .bss section, and skipping long delay

# loops. If true, adds -DALT_SIM_OPTIMIZE to ALT_CPPFLAGS in public.mk. When

# this setting is true, the BSP shouldn't be used to build applications that

# are expected to run real hardware.

# setting hal.enable_sim_optimize is false

# Causes the small newlib (C library) to be used. This reduces code and data

# footprint at the expense of reduced functionality. Several newlib features

# are removed such as floating-point support in printf(), stdin input routines,

# and buffered I/O. The small C library is not compatible with Micrium

# MicroC/OS-II. If true, adds -msmallc to ALT_LDFLAGS in public.mk. none

# setting hal.enable_small_c_library is true

ALT_LDFLAGS += -msmallc

ALT_CPPFLAGS += -DSMALL_C_LIB

# Enable SOPC Builder System ID. If a System ID SOPC Builder component is

# connected to the CPU associated with this BSP, it will be enabled in the

# creation of command-line arguments to download an ELF to the target.

# Otherwise, system ID and timestamp values are left out of public.mk for

# application Makefile "download-elf" target definition. With the system ID

# check disabled, the Nios II EDS tools will not automatically ensure that the

# application .elf file (and BSP it is linked against) corresponds to the

# hardware design on the target. If false, adds --accept-bad-sysid to

# SOPC_SYSID_FLAG in public.mk. none

# setting hal.enable_sopc_sysid_check is false

SOPC_SYSID_FLAG += --accept-bad-sysid

# Enable BSP generation to query if SOPC system is big endian. If true ignores

# export of 'ALT_CFLAGS += -meb' to public.mk if big endian system. none

# setting hal.make.ignore_system_derived.big_endian is false

# Enable BSP generation to query if SOPC system has a debug core present. If

# true ignores export of 'CPU_HAS_DEBUG_CORE = 1' to public.mk if a debug core

# is found in the system. If true ignores export of 'CPU_HAS_DEBUG_CORE = 0' if

# no debug core is found in the system. none

# setting hal.make.ignore_system_derived.debug_core_present is false

# Enable BSP generation to query if SOPC system has FPU present. If true

# ignores export of 'ALT_CFLAGS += -mhard-float' to public.mk if FPU is found

# in the system. If true ignores export of 'ALT_CFLAGS += -mhard-soft' if FPU

# is not found in the system. none

# setting hal.make.ignore_system_derived.fpu_present is false

# Enable BSP generation to query if SOPC system has hardware divide present. If

# true ignores export of 'ALT_CFLAGS += -mno-hw-div' to public.mk if no

# division is found in system. If true ignores export of 'ALT_CFLAGS +=

# -mhw-div' if division is found in the system. none

# setting hal.make.ignore_system_derived.hardware_divide_present is false

# Enable BSP generation to query if SOPC system floating point custom

# instruction with a divider is present. If true ignores export of 'ALT_CFLAGS

# += -mcustom-fpu-cfg=60-2' and 'ALT_LDFLAGS += -mcustom-fpu-cfg=60-2' to

# public.mk if the custom instruction is found in the system. none

# setting hal.make.ignore_system_derived.hardware_fp_cust_inst_divider_present is false

# Enable BSP generation to query if SOPC system floating point custom

# instruction without a divider is present. If true ignores export of

# 'ALT_CFLAGS += -mcustom-fpu-cfg=60-1' and 'ALT_LDFLAGS +=

# -mcustom-fpu-cfg=60-1' to public.mk if the custom instruction is found in the

# system. none

# setting hal.make.ignore_system_derived.hardware_fp_cust_inst_no_divider_present is false

# Enable BSP generation to query if SOPC system has multiplier present. If true

# ignores export of 'ALT_CFLAGS += -mno-hw-mul' to public.mk if no multiplier

# is found in the system. If true ignores export of 'ALT_CFLAGS += -mhw-mul' if

# multiplier is found in the system. none

# setting hal.make.ignore_system_derived.hardware_multiplier_present is false

# Enable BSP generation to query if SOPC system has hardware mulx present. If

# true ignores export of 'ALT_CFLAGS += -mno-hw-mulx' to public.mk if no mulx

# is found in the system. If true ignores export of 'ALT_CFLAGS += -mhw-mulx'

# if mulx is found in the system. none

# setting hal.make.ignore_system_derived.hardware_mulx_present is false

# Enable BSP generation to query if SOPC system has simulation enabled. If true

# ignores export of 'ELF_PATCH_FLAG += --simulation_enabled' to public.mk. none

# setting hal.make.ignore_system_derived.sopc_simulation_enabled is false

# Enable BSP generation to query SOPC system for system ID base address. If

# true ignores export of 'SOPC_SYSID_FLAG += --sidp=
' and

# 'ELF_PATCH_FLAG += --sidp=
' to public.mk. none

# setting hal.make.ignore_system_derived.sopc_system_base_address is false

# Enable BSP generation to query SOPC system for system ID. If true ignores

# export of 'SOPC_SYSID_FLAG += --id=' and 'ELF_PATCH_FLAG +=

# --id=' to public.mk. none

# setting hal.make.ignore_system_derived.sopc_system_id is false

# Enable BSP generation to query SOPC system for system timestamp. If true

# ignores export of 'SOPC_SYSID_FLAG += --timestamp=' and

# 'ELF_PATCH_FLAG += --timestamp=' to public.mk. none

# setting hal.make.ignore_system_derived.sopc_system_timestamp is false

# Slave descriptor of STDERR character-mode device. This setting is used by the

# ALT_STDERR family of defines in system.h. none

# setting hal.stderr is jtag_uart

ELF_PATCH_FLAG  += --stderr_dev jtag_uart

# Slave descriptor of STDIN character-mode device. This setting is used by the

# ALT_STDIN family of defines in system.h. none

# setting hal.stdin is jtag_uart

ELF_PATCH_FLAG  += --stdin_dev jtag_uart

# Slave descriptor of STDOUT character-mode device. This setting is used by the

# ALT_STDOUT family of defines in system.h. none

# setting hal.stdout is jtag_uart

ELF_PATCH_FLAG  += --stdout_dev jtag_uart

#------------------------------------------------------------------------------

#                 SOFTWARE COMPONENT & DRIVER INCLUDE PATHS

#------------------------------------------------------------------------------

ALT_INCLUDE_DIRS += $(ALT_LIBRARY_ROOT_DIR)/HAL/inc

#------------------------------------------------------------------------------

#        SOFTWARE COMPONENT & DRIVER PRODUCED ALT_CPPFLAGS ADDITIONS

#------------------------------------------------------------------------------

ALT_CPPFLAGS += -DALT_SINGLE_THREADED

#END MANAGED

#------------------------------------------------------------------------------

#                             LIBRARY INFORMATION

#------------------------------------------------------------------------------

# Assemble the name of the BSP *.a file using the BSP library name

# (BSP_SYS_LIB) in generated content above.

BSP_LIB := lib$(BSP_SYS_LIB).a

# Additional libraries to link against:

# An application including this file will prefix each library with "-l".

# For example, to include the Newlib math library "m" is included, which

# becomes "-lm" when linking the application.

ALT_LIBRARY_NAMES += m

# Additions to linker dependencies:

# An application Makefile will typically add these directly to the list

# of dependencies required to build the executable target(s). The BSP

# library (*.a) file is specified here.

ALT_LDDEPS += $(ALT_LIBRARY_ROOT_DIR)/$(BSP_LIB)

# Is this library "Makeable"?

# Add to list of root library directories that support running 'make'

# to build them. Because libraries may or may not have a Makefile in their

# root, appending to this variable tells an application to run 'make' in

# the library root to build/update this library.

MAKEABLE_LIBRARY_ROOT_DIRS += $(ALT_LIBRARY_ROOT_DIR)

# Additional Assembler Flags

# -gdwarf2 flag is required for stepping through assembly code

ALT_ASFLAGS += -gdwarf2

#------------------------------------------------------------------------------

#                       FINAL INCLUDE PATH LIST

#------------------------------------------------------------------------------

# Append static include paths to paths specified by OS/driver/sw package

# additions to the BSP thus giving them precedence in case a BSP addition

# is attempting to override BSP sources.

ALT_INCLUDE_DIRS += $(ALT_INCLUDE_DIRS_TO_APPEND)