Subversion Repositories mblite

----------------------------------------------------------------------------------------------

--

--      Input file         : core_wb_adapter.vhd

--      Design name        : core_wb_adapter.vhd

--      Author             : Tamar Kranenburg

--      Company            : Delft University of Technology

--                         : Faculty EEMCS, Department ME&CE

--                         : Systems and Circuits group

--

--      Description        : Wishbone adapter for the MB-Lite microprocessor. The data output

--                           is registered for multicycle transfers. This adapter implements

--                           the synchronous Wishbone Bus protocol, Rev3B.

--

----------------------------------------------------------------------------------------------

LIBRARY ieee;

USE ieee.std_logic_1164.ALL;

USE ieee.std_logic_unsigned.ALL;

LIBRARY mblite;

USE mblite.config_Pkg.ALL;

USE mblite.core_Pkg.ALL;

USE mblite.std_Pkg.ALL;

ENTITY core_wb_adapter IS PORT

(

    dmem_i : OUT dmem_in_type;

    wb_o   : OUT wb_mst_out_type;

    dmem_o : IN dmem_out_type;

    wb_i   : IN wb_mst_in_type

);

END core_wb_adapter;

ARCHITECTURE arch OF core_wb_adapter IS

    SIGNAL r_cyc_o : std_logic;

    SIGNAL rin_cyc_o : std_logic;

    SIGNAL r_data, rin_data : std_logic_vector(CFG_DMEM_WIDTH - 1 DOWNTO 0);

    SIGNAL s_wait : std_logic;

BEGIN

    -- Direct input-output connections

    wb_o.adr_o   <= dmem_o.adr_o;

    wb_o.sel_o   <= dmem_o.sel_o;

    wb_o.we_o    <= dmem_o.we_o;

    dmem_i.dat_i <= wb_i.dat_i;

    -- synchronous bus control connections

    wb_o.cyc_o <= r_cyc_o OR wb_i.ack_i;

    wb_o.stb_o <= r_cyc_o;

    -- asynchronous core enable connection

    dmem_i.ena_i <= '0' WHEN (dmem_o.ena_o = '1' AND rin_cyc_o = '1') OR s_wait = '1' ELSE '1';

    wb_o.dat_o   <= rin_data;

    -- logic for wishbone master

    wb_adapter_comb: PROCESS(wb_i, dmem_o, r_cyc_o, r_data)

    BEGIN

        IF wb_i.rst_i = '1' THEN

            -- reset bus

            rin_data <= r_data;

            rin_cyc_o <= '0';

            s_wait <= '0';

        ELSIF r_cyc_o = '1' AND wb_i.ack_i = '1' THEN

            -- terminate wishbone cycle

            rin_data <= r_data;

            rin_cyc_o <= '0';

            s_wait <= '0';

        ELSIF dmem_o.ena_o = '1' AND wb_i.ack_i = '1' THEN

            -- wishbone bus is occuppied

            rin_data <= r_data;

            rin_cyc_o <= '1';

            s_wait <= '1';

        ELSIF r_cyc_o = '0' AND dmem_o.ena_o = '1' AND wb_i.ack_i = '0' THEN

            -- start wishbone cycle

            rin_data <= dmem_o.dat_o;

            rin_cyc_o <= '1';

            s_wait <= '0';

        ELSE

            -- maintain wishbone cycle

            rin_data <= r_data;

            rin_cyc_o <= r_cyc_o;

            s_wait <= '0';

        END IF;

    END PROCESS;

    wb_adapter_seq: PROCESS(wb_i.clk_i)

    BEGIN

        IF rising_edge(wb_i.clk_i) THEN

            r_cyc_o <= rin_cyc_o;

            r_data <= rin_data;

        END IF;

    END PROCESS;

END arch;