Subversion Repositories mod_sim_exp

----------------------------------------------------------------------  

----  mod_sim_exp_pkg                                             ---- 

----                                                              ---- 

----  This file is part of the                                    ----

----    Modular Simultaneous Exponentiation Core project          ---- 

----    http://www.opencores.org/cores/mod_sim_exp/               ---- 

----                                                              ---- 

----  Description                                                 ---- 

----    Package for the Modular Simultaneous Exponentiation Core  ----

----    Project. Contains the component declarations and used     ----

----    constants.                                                ----

----                                                              ---- 

----  Dependencies: none                                          ---- 

----                                                              ---- 

----  Authors:                                                    ----

----      - Geoffrey Ottoy, DraMCo research group                 ----

----      - Jonas De Craene, JonasDC@opencores.org                ---- 

----                                                              ---- 

---------------------------------------------------------------------- 

----                                                              ---- 

---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG   ---- 

----                                                              ---- 

---- This source file may be used and distributed without         ---- 

---- restriction provided that this copyright statement is not    ---- 

---- removed from the file and that any derivative work contains  ---- 

---- the original copyright notice and the associated disclaimer. ---- 

----                                                              ---- 

---- This source file is free software; you can redistribute it   ---- 

---- and/or modify it under the terms of the GNU Lesser General   ---- 

---- Public License as published by the Free Software Foundation; ---- 

---- either version 2.1 of the License, or (at your option) any   ---- 

---- later version.                                               ---- 

----                                                              ---- 

---- This source is distributed in the hope that it will be       ---- 

---- useful, but WITHOUT ANY WARRANTY; without even the implied   ---- 

---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ---- 

---- PURPOSE.  See the GNU Lesser General Public License for more ---- 

---- details.                                                     ---- 

----                                                              ---- 

---- You should have received a copy of the GNU Lesser General    ---- 

---- Public License along with this source; if not, download it   ---- 

---- from http://www.opencores.org/lgpl.shtml                     ---- 

----                                                              ---- 

----------------------------------------------------------------------

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_unsigned.all;

package mod_sim_exp_pkg is

  --------------------------------------------------------------------

  -- d_flip_flop

  --------------------------------------------------------------------

  --    1-bit D flip-flop with asynchronous active high reset

  -- 

  component d_flip_flop is

    port(

      core_clk : in  std_logic; -- clock signal

      reset    : in  std_logic; -- active high reset

      din      : in  std_logic; -- data in

      dout     : out std_logic  -- data out

    );

  end component d_flip_flop;

  --------------------------------------------------------------------

  -- register_1b

  --------------------------------------------------------------------

  --    1-bit register with asynchronous reset and clock enable

  -- 

  component register_1b is

    port(

      core_clk : in  std_logic; -- clock input

      ce       : in  std_logic; -- clock enable (active high)

      reset    : in  std_logic; -- reset (active high)

      din      : in  std_logic; -- data in

      dout     : out std_logic  -- data out

    );

  end component register_1b;

  --------------------------------------------------------------------

  -- register_n

  --------------------------------------------------------------------

  --    n-bit register with asynchronous reset and clock enable

  -- 

  component register_n is

    generic(

      width : integer := 4

    );

    port(

      core_clk : in  std_logic; -- clock input

      ce       : in  std_logic; -- clock enable (active high)

      reset    : in  std_logic; -- reset (active high)

      din      : in  std_logic_vector((width-1) downto 0);  -- data in (width)-bit

      dout     : out std_logic_vector((width-1) downto 0)   -- data out (width)-bit

    );

  end component register_n;

  --------------------------------------------------------------------

  -- cell_1b_adder

  --------------------------------------------------------------------

  --    1-bit full adder cell using combinatorial logic

  --    

  component cell_1b_adder is

    port (

      -- input operands a, b

      a    : in  std_logic;

      b    : in  std_logic;

      -- carry in, out

      cin  : in  std_logic;

      cout : out  std_logic;

      -- result out

      r    : out  std_logic

    );

  end component cell_1b_adder;

  --------------------------------------------------------------------

  -- cell_1b_mux

  --------------------------------------------------------------------

  --    1-bit mux for a standard cell in the montgommery multiplier 

  --    systolic array

  -- 

  component cell_1b_mux is

    port (

      -- input bits

      my     : in  std_logic;

      y      : in  std_logic;

      m      : in  std_logic;

      -- selection bits

      x      : in  std_logic;

      q      : in  std_logic;

      -- mux out

      result : out std_logic

    );

  end component cell_1b_mux;

  --------------------------------------------------------------------

  -- cell_1b

  --------------------------------------------------------------------

  --    1-bit cell for the systolic array

  -- 

  component cell_1b is

    port (

      -- operand input bits (m+y, y and m)

      my   : in  std_logic;

      y    : in  std_logic;

      m    : in  std_logic;

      -- operand x input bit and q

      x    : in  std_logic;

      q    : in  std_logic;

      -- previous result input bit

      a    : in  std_logic;

      -- carry's

      cin  : in  std_logic;

      cout : out std_logic;

      -- cell result out

      r    : out std_logic

    );

  end component cell_1b;

  --------------------------------------------------------------------

  -- adder_block

  --------------------------------------------------------------------

  --    (width)-bit full adder block using cell_1b_adders with buffered

  --    carry out

  -- 

  component adder_block is

    generic (

      width : integer := 32 --adder operand widths

    );

    port (

      -- clock input

      core_clk : in std_logic;

      -- adder input operands a, b (width)-bit

      a : in std_logic_vector((width-1) downto 0);

      b : in std_logic_vector((width-1) downto 0);

      -- carry in, out

      cin   : in std_logic;

      cout  : out std_logic;

      -- adder result out (width)-bit

      r : out std_logic_vector((width-1) downto 0)

    );

  end component adder_block;

  --------------------------------------------------------------------

  -- adder_n

  --------------------------------------------------------------------

  --    n-bit adder using adder blocks. works in stages, to prevent 

  --    large carry propagation. 

  --    Result avaiable after (width/block_width) clock cycles

  -- 

  component adder_n is

    generic (

      width       : integer := 1536; -- adder operands width

      block_width : integer := 8     -- adder blocks size

    );

    port (

      -- clock input

      core_clk : in std_logic;

      -- adder input operands (width)-bit

      a : in std_logic_vector((width-1) downto 0);

      b : in std_logic_vector((width-1) downto 0);

      -- carry in, out

      cin   : in std_logic;

      cout  : out std_logic;

      -- adder output result (width)-bit

      r : out std_logic_vector((width-1) downto 0)

    );

  end component adder_n;

  --------------------------------------------------------------------

  -- standard_cell_block

  --------------------------------------------------------------------

  --    a standard cell block of (width)-bit for the montgommery multiplier 

  --    systolic array

  -- 

  component standard_cell_block is

    generic (

      width : integer := 16

    );

    port (

      -- modulus and y operand input (width)-bit

      my   : in  std_logic_vector((width-1) downto 0);

      y    : in  std_logic_vector((width-1) downto 0);

      m    : in  std_logic_vector((width-1) downto 0);

      -- q and x operand input (serial input)

      x    : in  std_logic;

      q    : in  std_logic;

      -- previous result in (width)-bit

      a    : in  std_logic_vector((width-1) downto 0);

      -- carry in and out

      cin  : in std_logic;

      cout : out std_logic;

      -- result out (width)-bit

      r    : out  std_logic_vector((width-1) downto 0)

    );

  end component standard_cell_block;

  --------------------------------------------------------------------

  -- standard_stage

  --------------------------------------------------------------------

  --    standard stage for use in the montgommery multiplier pipeline

  --    the result is available after 1 clock cycle

  -- 

  component standard_stage is

    generic(

      width : integer := 32

    );

    port(

      -- clock input

      core_clk : in  std_logic;

      -- modulus and y operand input (width)-bit

      my       : in  std_logic_vector((width-1) downto 0);

      y        : in  std_logic_vector((width-1) downto 0);

      m        : in  std_logic_vector((width-1) downto 0);

      -- q and x operand input (serial input)

      xin      : in  std_logic;

      qin      : in  std_logic;

      -- q and x operand output (serial output)

      xout     : out std_logic;

      qout     : out std_logic;

      -- msb input (lsb from next stage, for shift right operation)

      a_msb    : in  std_logic;

      -- carry out(clocked) and in

      cin      : in  std_logic;

      cout     : out std_logic;

      -- control singals

      start    : in  std_logic;

      reset    : in  std_logic;

      done : out std_logic;

      -- result out

      r    : out std_logic_vector((width-1) downto 0)

    );

  end component standard_stage;

  --------------------------------------------------------------------

  -- first_stage

  --------------------------------------------------------------------

  --    first stage for use in the montgommery multiplier pipeline

  --    generates the q signal for all following stages

  --    the result is available after 1 clock cycle

  -- 

  component first_stage is

    generic(

      width : integer := 16 -- must be the same as width of the standard stage

    );

    port(

      -- clock input

      core_clk : in  std_logic;

      -- modulus and y operand input (width+1)-bit

      my       : in  std_logic_vector((width) downto 0);

      y        : in  std_logic_vector((width) downto 0);

      m        : in  std_logic_vector((width) downto 0);

      -- x operand input (serial input)

      xin      : in  std_logic;

      -- q and x operand output (serial output)

      xout     : out std_logic;

      qout     : out std_logic;

      -- msb input (lsb from next stage, for shift right operation)

      a_msb    : in  std_logic;

      -- carry out

      cout     : out std_logic;

      -- control signals

      start    : in  std_logic;

      reset    : in  std_logic;

      done     : out std_logic;

      -- result out

      r        : out std_logic_vector((width-1) downto 0)

    );

  end component first_stage;

  --------------------------------------------------------------------

  -- last_stage

  --------------------------------------------------------------------

  --    last stage for use in the montgommery multiplier pipeline

  --    the result is available after 1 clock cycle

  -- 

  component last_stage is

    generic(

      width : integer := 16 -- must be the same as width of the standard stage

    );

    port(

      -- clock input

      core_clk : in  std_logic;

      -- modulus and y operand input (width(-1))-bit

      my       : in  std_logic_vector((width-1) downto 0);

      y        : in  std_logic_vector((width-2) downto 0);

      m        : in  std_logic_vector((width-2) downto 0);

      -- q and x operand input (serial input)

      xin      : in  std_logic;

      qin      : in  std_logic;

      -- carry in

      cin      : in  std_logic;

      -- control signals

      start    : in  std_logic;

      reset    : in  std_logic;

      -- result out

      r        : out std_logic_vector((width+1) downto 0)

    );

  end component last_stage;

  component autorun_cntrl is

    port (

      clk              : in  std_logic;

      reset            : in  std_logic;

      start            : in  std_logic;

      done             : out  std_logic;

      op_sel           : out  std_logic_vector (1 downto 0);

      start_multiplier : out  std_logic;

      multiplier_done  : in  std_logic;

      read_buffer      : out  std_logic;

      buffer_din       : in  std_logic_vector (31 downto 0);

      buffer_empty     : in  std_logic

    );

  end component autorun_cntrl;

  component counter_sync is

    generic(

      max_value : integer := 1024

    );

    port(

      reset_value : in integer;

      core_clk    : in std_logic;

      ce          : in std_logic;

      reset       : in std_logic;

      overflow    : out std_logic

    );

  end component counter_sync;

  component fifo_primitive is

    port (

      clk    : in  std_logic;

      din    : in  std_logic_vector (31 downto 0);

      dout   : out  std_logic_vector (31 downto 0);

      empty  : out  std_logic;

      full   : out  std_logic;

      push   : in  std_logic;

      pop    : in  std_logic;

      reset  : in std_logic;

      nopop  : out std_logic;

      nopush : out std_logic

    );

  end component fifo_primitive;

  component modulus_ram is

    port(

      clk           : in std_logic;

      modulus_addr  : in std_logic_vector(5 downto 0);

      write_modulus : in std_logic;

      modulus_in    : in std_logic_vector(31 downto 0);

      modulus_out   : out std_logic_vector(1535 downto 0)

    );

  end component modulus_ram;

  component mont_ctrl is

    port (

      clk   : in std_logic;

      reset : in std_logic;

        -- bus side

      start           : in std_logic;

      x_sel_single    : in std_logic_vector(1 downto 0);

      y_sel_single    : in std_logic_vector(1 downto 0);

      run_auto        : in std_logic;

      op_buffer_empty : in std_logic;

      op_sel_buffer   : in std_logic_vector(31 downto 0);

      read_buffer     : out std_logic;

      buffer_noread   : in std_logic;

      done            : out std_logic;

      calc_time       : out std_logic;

        -- multiplier side

      op_sel           : out std_logic_vector(1 downto 0);

      load_x           : out std_logic;

      load_result      : out std_logic;

      start_multiplier : out std_logic;

      multiplier_ready : in std_logic

    );

  end component mont_ctrl;

  component mont_mult_sys_pipeline is

    generic (

      n          : integer := 1536;

      nr_stages  : integer := 96; --(divides n, bits_low & (n-bits_low))

      stages_low : integer := 32

    );

    port (

      core_clk : in std_logic;

      xy       : in std_logic_vector((n-1) downto 0);

      m        : in std_logic_vector((n-1) downto 0);

      r        : out std_logic_vector((n-1) downto 0);

      start    : in std_logic;

      reset    : in std_logic;

      p_sel    : in std_logic_vector(1 downto 0);

      load_x   : in std_logic;

      ready    : out std_logic

    );

  end component mont_mult_sys_pipeline;

  component multiplier_core is

    port(

      clk   : in  std_logic;

      reset : in  std_logic;

        -- operand memory interface (plb shared memory)

      write_enable : in  std_logic;

      data_in      : in  std_logic_vector (31 downto 0);

      rw_address   : in  std_logic_vector (8 downto 0);

      data_out     : out std_logic_vector (31 downto 0);

      collision    : out std_logic;

        -- op_sel fifo interface

      fifo_din    : in  std_logic_vector (31 downto 0);

      fifo_push   : in  std_logic;

      fifo_full   : out std_logic;

      fifo_nopush : out std_logic;

        -- ctrl signals

      start          : in  std_logic;

      run_auto       : in  std_logic;

      ready          : out std_logic;

      x_sel_single   : in  std_logic_vector (1 downto 0);

      y_sel_single   : in  std_logic_vector (1 downto 0);

      dest_op_single : in  std_logic_vector (1 downto 0);

      p_sel          : in  std_logic_vector (1 downto 0);

      calc_time      : out std_logic

    );

  end component multiplier_core;

  component operand_dp is

    port (

      clka  : in std_logic;

      wea   : in std_logic_vector(0 downto 0);

      addra : in std_logic_vector(5 downto 0);

      dina  : in std_logic_vector(31 downto 0);

      douta : out std_logic_vector(511 downto 0);

      clkb  : in std_logic;

      web   : in std_logic_vector(0 downto 0);

      addrb : in std_logic_vector(5 downto 0);

      dinb  : in std_logic_vector(511 downto 0);

      doutb : out std_logic_vector(31 downto 0)

    );

  end component operand_dp;

  component operand_mem is

    generic(n : integer := 1536

    );

    port(

        -- data interface (plb side)

      data_in    : in  std_logic_vector(31 downto 0);

      data_out   : out  std_logic_vector(31 downto 0);

      rw_address : in  std_logic_vector(8 downto 0);

        -- address structure:

        -- bit:  8   -> '1': modulus

        --              '0': operands

        -- bits: 7-6 -> operand_in_sel in case of bit 8 = '0'

        --              don't care in case of modulus

        -- bits: 5-0 -> modulus_addr / operand_addr resp.

        -- operand interface (multiplier side)

      op_sel    : in  std_logic_vector(1 downto 0);

      xy_out    : out  std_logic_vector(1535 downto 0);

      m         : out  std_logic_vector(1535 downto 0);

      result_in : in std_logic_vector(1535 downto 0);

        -- control signals

      load_op        : in std_logic;

      load_m         : in std_logic;

      load_result    : in std_logic;

      result_dest_op : in std_logic_vector(1 downto 0);

      collision      : out std_logic;

        -- system clock

      clk : in  std_logic

    );

  end component operand_mem;

  component operand_ram is

    port( -- write_operand_ack voorzien?

      -- global ports

      clk       : in std_logic;

      collision : out std_logic;

      -- bus side connections (32-bit serial)

      operand_addr   : in std_logic_vector(5 downto 0);

      operand_in     : in std_logic_vector(31 downto 0);

      operand_in_sel : in std_logic_vector(1 downto 0);

      result_out     : out std_logic_vector(31 downto 0);

      write_operand  : in std_logic;

      -- multiplier side connections (1536 bit parallel)

      result_dest_op  : in std_logic_vector(1 downto 0);

      operand_out     : out std_logic_vector(1535 downto 0);

      operand_out_sel : in std_logic_vector(1 downto 0); -- controlled by bus side

      write_result    : in std_logic;

      result_in       : in std_logic_vector(1535 downto 0)

    );

  end component operand_ram;

  component operands_sp is

    port (

      clka  : in std_logic;

      wea   : in std_logic_vector(0 downto 0);

      addra : in std_logic_vector(4 downto 0);

      dina  : in std_logic_vector(31 downto 0);

      douta : out std_logic_vector(511 downto 0)

    );

  end component operands_sp;

  component stepping_logic is

    generic(

      n : integer := 1536; -- max nr of steps required to complete a multiplication

      t : integer := 192 -- total nr of steps in the pipeline

    );

    port(

      core_clk          : in  std_logic;

      start             : in  std_logic;

      reset             : in  std_logic;

      t_sel             : in integer range 0 to t; -- nr of stages in the pipeline piece

      n_sel             : in integer range 0 to n; -- nr of steps required for a complete multiplication

      start_first_stage : out std_logic;

      stepping_done     : out std_logic

    );

  end component stepping_logic;

  component systolic_pipeline is

    generic(

      n  : integer := 1536; -- width of the operands (# bits)

      t  : integer := 192;  -- number of stages (divider of n) >= 2

      tl : integer := 64    -- best take t = sqrt(n)

    );

    port(

      core_clk : in  std_logic;

      my       : in  std_logic_vector((n) downto 0);

      y        : in  std_logic_vector((n-1) downto 0);

      m        : in  std_logic_vector((n-1) downto 0);

      xi       : in  std_logic;

      start    : in  std_logic;

      reset    : in  std_logic;

      p_sel    : in  std_logic_vector(1 downto 0); -- select which piece of the multiplier will be used

      ready    : out std_logic;

      next_x   : out std_logic;

      r        : out std_logic_vector((n+1) downto 0)

    );

  end component systolic_pipeline;

  component x_shift_reg is

    generic(

      n  : integer := 1536;

      t  : integer := 48;

      tl : integer := 16

    );

    port(

      clk    : in  std_logic;

      reset  : in  std_logic;

      x_in   : in  std_logic_vector((n-1) downto 0);

      load_x : in  std_logic;

      next_x : in  std_logic;

      p_sel  : in  std_logic_vector(1 downto 0);

      x_i    : out std_logic

    );

  end component x_shift_reg;

end package mod_sim_exp_pkg;