OpenCores
URL https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk

Subversion Repositories open8_urisc

[/] [open8_urisc/] [trunk/] [VHDL/] [async_ser_rx.vhd] - Blame information for rev 220

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 207 jshamlet
-- Copyright (c)2006, 2016, 2019 Jeremy Seth Henry
2
-- All rights reserved.
3
--
4
-- Redistribution and use in source and binary forms, with or without
5
-- modification, are permitted provided that the following conditions are met:
6
--     * Redistributions of source code must retain the above copyright
7
--       notice, this list of conditions and the following disclaimer.
8
--     * Redistributions in binary form must reproduce the above copyright
9
--       notice, this list of conditions and the following disclaimer in the
10
--       documentation and/or other materials provided with the distribution,
11
--       where applicable (as part of a user interface, debugging port, etc.)
12
--
13
-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY
14
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
15
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
16
-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY
17
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
18
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
19
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
20
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21 220 jshamlet
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22
-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23 207 jshamlet
--
24
-- VHDL Units :  async_ser_rx
25
-- Description:  Asynchronous receiver wired for 8[N/E/O]1 data. Parity mode
26
--                and bit rate are set with generics.
27 209 jshamlet
--
28
-- Note: The baud rate generator will produce an approximate frequency. The
29
--        final bit rate should be within +/- 1% of the true bit rate to
30
--        ensure the receiver can successfully receive. With a sufficiently
31
--        high core clock, this is generally achievable for common PC serial
32
--        data rates.
33 218 jshamlet
--
34
-- Revision History
35
-- Author          Date     Change
36
------------------ -------- ---------------------------------------------------
37
-- Seth Henry      04/14/20 Code cleanup and revision section added
38 207 jshamlet
 
39
library ieee;
40
use ieee.std_logic_1164.all;
41
use ieee.std_logic_unsigned.all;
42
use ieee.std_logic_arith.all;
43
use ieee.std_logic_misc.all;
44
 
45
entity async_ser_rx is
46
generic(
47 215 jshamlet
  Reset_Level                : std_logic;
48
  Enable_Parity              : boolean;
49
  Parity_Odd_Even_n          : std_logic;
50
  Clock_Divider              : integer
51 207 jshamlet
);
52
port(
53 215 jshamlet
  Clock                      : in  std_logic;
54
  Reset                      : in  std_logic;
55
  --
56
  Rx_In                      : in  std_logic;
57
  --
58
  Rx_Data                    : out std_logic_vector(7 downto 0);
59
  Rx_Valid                   : out std_logic;
60
  Rx_PErr                    : out std_logic
61 207 jshamlet
);
62
end entity;
63
 
64
architecture behave of async_ser_rx is
65
 
66
  -- The ceil_log2 function returns the minimum register width required to
67
  --  hold the supplied integer.
68
  function ceil_log2 (x : in natural) return natural is
69
    variable retval          : natural;
70
  begin
71
    retval                   := 1;
72
    while ((2**retval) - 1) < x loop
73
      retval                 := retval + 1;
74
    end loop;
75
    return retval;
76
  end ceil_log2;
77
 
78
  -- Period of each bit in sub-clocks (subtract one to account for zero)
79
  constant Half_Per_i        : integer := (Clock_Divider / 2) - 1;
80
  constant Full_Per_i        : integer := Clock_Divider - 1;
81
  constant Baud_Bits         : integer := ceil_log2(Full_Per_i);
82
 
83
  constant HALF_PERIOD       : std_logic_vector(Baud_Bits - 1 downto 0) :=
84
                                 conv_std_logic_vector(Half_Per_i, Baud_Bits);
85
  constant FULL_PERIOD       : std_logic_vector(Baud_Bits - 1 downto 0) :=
86
                                 conv_std_logic_vector(Full_Per_i, Baud_Bits);
87
 
88 208 jshamlet
  signal Rx_Baud_Cntr        : std_logic_vector(Baud_Bits - 1 downto 0) :=
89
                                 (others => '0');
90 207 jshamlet
 
91 208 jshamlet
  signal Rx_In_SR            : std_logic_vector(3 downto 0) := x"0";
92 207 jshamlet
  alias  Rx_In_Q             is Rx_In_SR(3);
93
 
94 208 jshamlet
  signal Rx_Buffer           : std_logic_vector(7 downto 0) := x"00";
95
  signal Rx_Parity           : std_logic := '0';
96
  signal Rx_PErr_int         : std_logic := '0';
97 207 jshamlet
 
98 208 jshamlet
  signal Rx_State            : std_logic_vector(3 downto 0) := x"0";
99 207 jshamlet
  alias  Rx_Bit_Sel          is Rx_State(2 downto 0);
100
 
101
  -- State machine definitions
102
  constant IO_RSV0           : std_logic_vector(3 downto 0) := "1011"; -- B
103
  constant IO_RSV1           : std_logic_vector(3 downto 0) := "1100"; -- C
104
  constant IO_STRT           : std_logic_vector(3 downto 0) := "1101"; -- D
105
  constant IO_IDLE           : std_logic_vector(3 downto 0) := "1110"; -- E
106
  constant IO_SYNC           : std_logic_vector(3 downto 0) := "1111"; -- F
107
  constant IO_BIT0           : std_logic_vector(3 downto 0) := "0000"; -- 0
108
  constant IO_BIT1           : std_logic_vector(3 downto 0) := "0001"; -- 1
109
  constant IO_BIT2           : std_logic_vector(3 downto 0) := "0010"; -- 2
110
  constant IO_BIT3           : std_logic_vector(3 downto 0) := "0011"; -- 3
111
  constant IO_BIT4           : std_logic_vector(3 downto 0) := "0100"; -- 4
112
  constant IO_BIT5           : std_logic_vector(3 downto 0) := "0101"; -- 5
113
  constant IO_BIT6           : std_logic_vector(3 downto 0) := "0110"; -- 6
114
  constant IO_BIT7           : std_logic_vector(3 downto 0) := "0111"; -- 7
115
  constant IO_PARI           : std_logic_vector(3 downto 0) := "1000"; -- 8
116
  constant IO_STOP           : std_logic_vector(3 downto 0) := "1001"; -- 9
117
  constant IO_DONE           : std_logic_vector(3 downto 0) := "1010"; -- A
118
 
119
begin
120
 
121
  Rx_Perr                    <= Rx_PErr_int;
122
 
123
  UART_Regs: process( Clock, Reset )
124
  begin
125
    if( Reset = Reset_Level )then
126
      Rx_In_SR               <= (others => '0');
127
      Rx_State               <= IO_IDLE;
128
      Rx_Baud_Cntr           <= (others => '0');
129
      Rx_Buffer              <= (others => '0');
130
      Rx_Parity              <= '0';
131
      Rx_Data                <= (others => '0');
132
      Rx_Valid               <= '0';
133
      Rx_PErr_int            <= '0';
134
    elsif( rising_edge(Clock) )then
135
      Rx_In_SR               <= Rx_In_SR(2 downto 0) & Rx_In;
136
 
137
      Rx_Valid               <= '0';
138
      case( Rx_State )is
139
        when IO_STRT =>
140
          if( Rx_In_Q = '1' )then
141
            Rx_State         <= Rx_State + 1;
142
          end if;
143
 
144
        when IO_IDLE =>
145
          Rx_Baud_Cntr       <= HALF_PERIOD;
146
          Rx_Parity          <= Parity_Odd_Even_n;
147
          if( Rx_In_Q = '0' )then
148
            Rx_State         <= Rx_State + 1;
149
          end if;
150
 
151
        when IO_SYNC =>
152
          Rx_Baud_Cntr       <= Rx_Baud_Cntr - 1;
153
          if( Rx_Baud_Cntr = 0)then
154
            Rx_Baud_Cntr     <= FULL_PERIOD;
155
            Rx_State         <= Rx_State + 1;
156
            if( Rx_In_Q = '1' )then -- RxD going low was spurious
157
              Rx_State       <= IO_IDLE;
158
            end if;
159
          end if;
160
 
161
        when IO_BIT0 | IO_BIT1 | IO_BIT2 | IO_BIT3 |
162
             IO_BIT4 | IO_BIT5 | IO_BIT6 | IO_BIT7 =>
163
          Rx_Baud_Cntr       <= Rx_Baud_Cntr - 1;
164
          if( Rx_Baud_Cntr = 0 )then
165
            Rx_Baud_Cntr     <= FULL_PERIOD;
166
            Rx_Buffer(conv_integer(Rx_Bit_Sel)) <= Rx_In_Q;
167
            if( Enable_Parity )then
168
              Rx_Parity      <= Rx_Parity xor Rx_In_Q;
169
              Rx_State       <= Rx_State + 1;
170
            else
171
              Rx_PErr_int    <= '0';
172
              Rx_State       <= Rx_State + 2;
173
            end if;
174
          end if;
175
 
176
        when IO_PARI =>
177
          Rx_Baud_Cntr       <= Rx_Baud_Cntr - 1;
178
          if( Rx_Baud_Cntr = 0 )then
179
            Rx_Baud_Cntr     <= FULL_PERIOD;
180
            Rx_PErr_int      <= Rx_Parity xor Rx_In_Q;
181
            Rx_State         <= Rx_State + 1;
182
          end if;
183
 
184
        when IO_STOP =>
185
          Rx_Baud_Cntr       <= Rx_Baud_Cntr - 1;
186
          if( Rx_Baud_Cntr = 0 )then
187
            Rx_State         <= Rx_State + 1;
188
          end if;
189
 
190
        when IO_DONE =>
191
          Rx_Data            <= Rx_Buffer;
192
          Rx_Valid           <= not Rx_PErr_int;
193
          Rx_State           <= Rx_State + 1;
194
 
195
        when others =>
196
          Rx_State           <= IO_IDLE;
197
 
198
      end case;
199
 
200
    end if;
201
  end process;
202
 
203
end architecture;

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.