| 1 |
12 |
dgisselq |
////////////////////////////////////////////////////////////////////////////////
|
| 2 |
|
|
//
|
| 3 |
|
|
// Filename: eqspiflashsim.cpp
|
| 4 |
|
|
//
|
| 5 |
|
|
// Project: OpenArty, an entirely open SoC based upon the Arty platform
|
| 6 |
|
|
//
|
| 7 |
|
|
// Purpose: This library simulates the operation of a Quad-SPI commanded
|
| 8 |
|
|
// flash, such as the Micron N25Q128A used on the Arty development
|
| 9 |
|
|
// board by Digilent. As such, it is defined by 16 MBytes of
|
| 10 |
|
|
// memory (4 MWord).
|
| 11 |
|
|
//
|
| 12 |
|
|
// This simulator is useful for testing in a Verilator/C++
|
| 13 |
|
|
// environment, where this simulator can be used in place of
|
| 14 |
|
|
// the actual hardware.
|
| 15 |
|
|
//
|
| 16 |
|
|
// Creator: Dan Gisselquist, Ph.D.
|
| 17 |
|
|
// Gisselquist Technology, LLC
|
| 18 |
|
|
//
|
| 19 |
|
|
////////////////////////////////////////////////////////////////////////////////
|
| 20 |
|
|
//
|
| 21 |
|
|
// Copyright (C) 2015-2016, Gisselquist Technology, LLC
|
| 22 |
|
|
//
|
| 23 |
|
|
// This program is free software (firmware): you can redistribute it and/or
|
| 24 |
|
|
// modify it under the terms of the GNU General Public License as published
|
| 25 |
|
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
| 26 |
|
|
// your option) any later version.
|
| 27 |
|
|
//
|
| 28 |
|
|
// This program is distributed in the hope that it will be useful, but WITHOUT
|
| 29 |
|
|
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
|
| 30 |
|
|
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
| 31 |
|
|
// for more details.
|
| 32 |
|
|
//
|
| 33 |
|
|
// You should have received a copy of the GNU General Public License along
|
| 34 |
|
|
// with this program. (It's in the $(ROOT)/doc directory, run make with no
|
| 35 |
|
|
// target there if the PDF file isn't present.) If not, see
|
| 36 |
|
|
// <http://www.gnu.org/licenses/> for a copy.
|
| 37 |
|
|
//
|
| 38 |
|
|
// License: GPL, v3, as defined and found on www.gnu.org,
|
| 39 |
|
|
// http://www.gnu.org/licenses/gpl.html
|
| 40 |
|
|
//
|
| 41 |
|
|
//
|
| 42 |
|
|
////////////////////////////////////////////////////////////////////////////////
|
| 43 |
|
|
//
|
| 44 |
|
|
//
|
| 45 |
|
|
#include <stdio.h>
|
| 46 |
|
|
#include <string.h>
|
| 47 |
|
|
#include <assert.h>
|
| 48 |
|
|
#include <stdlib.h>
|
| 49 |
|
|
|
| 50 |
|
|
#include "eqspiflashsim.h"
|
| 51 |
|
|
|
| 52 |
|
|
#define MEMBYTES (1<<24)
|
| 53 |
|
|
|
| 54 |
|
|
static const unsigned
|
| 55 |
|
|
DEVESD = 0x014,
|
| 56 |
|
|
// MICROSECONDS = 200,
|
| 57 |
|
|
// MILLISECONDS = MICROSECONDS * 1000,
|
| 58 |
|
|
// SECONDS = MILLISECONDS * 1000,
|
| 59 |
|
|
MICROSECONDS = 20,
|
| 60 |
|
|
MILLISECONDS = MICROSECONDS * 10,
|
| 61 |
|
|
SECONDS = MILLISECONDS * 10,
|
| 62 |
|
|
tSHSL1 = 4, // S# deselect time after a read command
|
| 63 |
|
|
tSHSL2 = 10, // S# deselect time after a non-read command
|
| 64 |
|
|
tW = 1300 * MICROSECONDS, // write config cycle time
|
| 65 |
|
|
tWNVCR = 200 * MILLISECONDS, // write nonvolatile-config cycle time
|
| 66 |
|
|
tWVECR = 8, // write volatile enhanced config cycle time
|
| 67 |
|
|
tBE = 32 * SECONDS, // Bulk erase time
|
| 68 |
|
|
tDP = 10 * SECONDS, // Deep power down
|
| 69 |
|
|
tRES = 30 * SECONDS,
|
| 70 |
|
|
// Shall we artificially speed up this process?
|
| 71 |
|
|
// These numbers are the "typical" times
|
| 72 |
|
|
tPP = 500 * MICROSECONDS, // Page program time
|
| 73 |
|
|
tSE = 700 * MILLISECONDS, // Sector erase time
|
| 74 |
|
|
tSS = 250 * MILLISECONDS; // Subsector erase time
|
| 75 |
|
|
// These are the maximum times
|
| 76 |
|
|
// tW = 8300 * MICROSECONDS, // write config cycle time
|
| 77 |
|
|
// tWNVCR = 3000 * MILLISECONDS, // write nonvolatile-config cycle time
|
| 78 |
|
|
// tWVECR = 8, // write volatile enhanced config cycle time
|
| 79 |
|
|
// tPP = 5000 * MICROSECONDS,
|
| 80 |
|
|
// tSE = 3000 * MILLISECONDS;
|
| 81 |
|
|
// tSS = 800 * MILLISECONDS;
|
| 82 |
|
|
|
| 83 |
|
|
static const char IDSTR[20]= {
|
| 84 |
|
|
0x20, // Micron's ID, assigned by JEDEC
|
| 85 |
|
|
(char)0xba, (char)0x18, // Memory type and capacity
|
| 86 |
|
|
(char)0x10, // Length of data to follow
|
| 87 |
|
|
(char)0xfe, (char)0xfd, // Extended device ID and device config info
|
| 88 |
|
|
(char)0xfc, (char)0xfb, (char)0xfa, (char)0xf9,
|
| 89 |
|
|
(char)0xf8, (char)0xf7, (char)0xf6, (char)0xf5,
|
| 90 |
|
|
(char)0xf4, (char)0xf3, (char)0xf2, (char)0xf1,
|
| 91 |
|
|
(char)0xf0, (char)0xef
|
| 92 |
|
|
};
|
| 93 |
|
|
|
| 94 |
|
|
EQSPIFLASHSIM::EQSPIFLASHSIM(void) {
|
| 95 |
|
|
const int NSECTORS = MEMBYTES>>16;
|
| 96 |
|
|
m_mem = new char[MEMBYTES];
|
| 97 |
|
|
m_pmem = new char[256];
|
| 98 |
|
|
m_otp = new char[65];
|
| 99 |
|
|
for(int i=0; i<65; i++)
|
| 100 |
|
|
m_otp[i] = 0x0ff;
|
| 101 |
|
|
m_otp[64] = 1;
|
| 102 |
|
|
m_otp_wp = false;
|
| 103 |
|
|
m_lockregs = new char[NSECTORS];
|
| 104 |
|
|
for(int i=0; i<NSECTORS; i++)
|
| 105 |
|
|
m_lockregs[i] = 0;
|
| 106 |
|
|
|
| 107 |
|
|
m_state = EQSPIF_IDLE;
|
| 108 |
|
|
m_last_sck = 1;
|
| 109 |
|
|
m_write_count = 0;
|
| 110 |
|
|
m_ireg = m_oreg = 0;
|
| 111 |
|
|
m_sreg = 0x01c;
|
| 112 |
|
|
m_creg = 0x001; // Initial creg on delivery
|
| 113 |
14 |
dgisselq |
m_vconfig = 0x7; // Volatile configuration register
|
| 114 |
12 |
dgisselq |
m_nvconfig = 0x0fff; // Nonvolatile configuration register
|
| 115 |
|
|
m_quad_mode = false;
|
| 116 |
|
|
m_mode_byte = 0;
|
| 117 |
|
|
m_flagreg = 0x0a5;
|
| 118 |
|
|
|
| 119 |
|
|
m_debug = true;
|
| 120 |
|
|
|
| 121 |
|
|
memset(m_mem, 0x0ff, MEMBYTES);
|
| 122 |
|
|
}
|
| 123 |
|
|
|
| 124 |
|
|
void EQSPIFLASHSIM::load(const unsigned addr, const char *fname) {
|
| 125 |
|
|
FILE *fp;
|
| 126 |
|
|
size_t len;
|
| 127 |
|
|
|
| 128 |
|
|
if (addr >= MEMBYTES)
|
| 129 |
|
|
return; // return void
|
| 130 |
|
|
len = MEMBYTES-addr*4;
|
| 131 |
|
|
|
| 132 |
|
|
if (NULL != (fp = fopen(fname, "r"))) {
|
| 133 |
|
|
int nr = 0;
|
| 134 |
|
|
nr = fread(&m_mem[addr*4], sizeof(char), len, fp);
|
| 135 |
|
|
fclose(fp);
|
| 136 |
|
|
if (nr == 0) {
|
| 137 |
|
|
fprintf(stderr, "SPI-FLASH: Could not read %s\n", fname);
|
| 138 |
|
|
perror("O/S Err:");
|
| 139 |
|
|
}
|
| 140 |
|
|
} else {
|
| 141 |
|
|
fprintf(stderr, "SPI-FLASH: Could not open %s\n", fname);
|
| 142 |
|
|
perror("O/S Err:");
|
| 143 |
|
|
}
|
| 144 |
|
|
}
|
| 145 |
|
|
|
| 146 |
|
|
#define QOREG(A) m_oreg = ((m_oreg & (~0x0ff))|(A&0x0ff))
|
| 147 |
|
|
|
| 148 |
|
|
int EQSPIFLASHSIM::operator()(const int csn, const int sck, const int dat) {
|
| 149 |
|
|
// Keep track of a timer to determine when page program and erase
|
| 150 |
|
|
// cycles complete.
|
| 151 |
|
|
|
| 152 |
|
|
if (m_write_count > 0) {
|
| 153 |
|
|
if (0 == (--m_write_count)) {// When done with erase/page pgm,
|
| 154 |
|
|
// Clear the write in progress bit, together with the
|
| 155 |
|
|
// write enable bit.
|
| 156 |
|
|
m_sreg &= 0x0fc;
|
| 157 |
|
|
if (m_debug) printf("Write complete, clearing WIP (inside SIM)\n");
|
| 158 |
|
|
}
|
| 159 |
|
|
}
|
| 160 |
|
|
|
| 161 |
|
|
if (csn) {
|
| 162 |
|
|
m_last_sck = 1;
|
| 163 |
|
|
m_ireg = 0; m_oreg = 0;
|
| 164 |
|
|
|
| 165 |
|
|
if ((EQSPIF_PP == m_state)||(EQSPIF_QPP == m_state)) {
|
| 166 |
|
|
// Start a page program
|
| 167 |
|
|
if (m_debug) printf("EQSPI: Page Program write cycle begins\n");
|
| 168 |
|
|
if (m_debug) printf("CK = %d & 7 = %d\n", m_count, m_count & 0x07);
|
| 169 |
|
|
if (m_debug) printf("EQSPI: pmem = %08lx\n", (unsigned long)m_pmem);
|
| 170 |
|
|
assert((m_lockregs[(m_addr>>16)&0x0ff]&0x1)==0);
|
| 171 |
|
|
assert((m_count & 7)==0);
|
| 172 |
|
|
m_write_count = tPP;
|
| 173 |
|
|
m_state = EQSPIF_IDLE;
|
| 174 |
|
|
m_sreg &= (~EQSPIF_WEL_FLAG);
|
| 175 |
|
|
m_sreg |= (EQSPIF_WIP_FLAG);
|
| 176 |
|
|
for(int i=0; i<256; i++) {
|
| 177 |
|
|
/*
|
| 178 |
|
|
if (m_debug) printf("%02x: m_mem[%02x] = %02x &= %02x = %02x\n",
|
| 179 |
|
|
i, (m_addr&(~0x0ff))+i,
|
| 180 |
|
|
m_mem[(m_addr&(~0x0ff))+i]&0x0ff, m_pmem[i]&0x0ff,
|
| 181 |
|
|
m_mem[(m_addr&(~0x0ff))+i]& m_pmem[i]&0x0ff);
|
| 182 |
|
|
*/
|
| 183 |
|
|
m_mem[(m_addr&(~0x0ff))+i] &= m_pmem[i];
|
| 184 |
|
|
}
|
| 185 |
|
|
m_quad_mode = false;
|
| 186 |
|
|
} else if (EQSPIF_WRCR == m_state) {
|
| 187 |
|
|
if (m_debug) printf("Actually writing volatile config register\n");
|
| 188 |
|
|
if (m_debug) printf("CK = %d & 7 = %d\n", m_count, m_count & 0x07);
|
| 189 |
|
|
m_state = EQSPIF_IDLE;
|
| 190 |
|
|
} else if (EQSPIF_WRNVCONFIG == m_state) {
|
| 191 |
|
|
if (m_debug) printf("Actually writing nonvolatile config register\n");
|
| 192 |
|
|
m_write_count = tWNVCR;
|
| 193 |
|
|
m_state = EQSPIF_IDLE;
|
| 194 |
|
|
} else if (EQSPIF_WREVCONFIG == m_state) {
|
| 195 |
|
|
if (m_debug) printf("Actually writing Enhanced volatile config register\n");
|
| 196 |
|
|
m_state = EQSPIF_IDLE;
|
| 197 |
|
|
} else if (EQSPIF_WRSR == m_state) {
|
| 198 |
|
|
if (m_debug) printf("Actually writing status register\n");
|
| 199 |
|
|
m_write_count = tW;
|
| 200 |
|
|
m_state = EQSPIF_IDLE;
|
| 201 |
|
|
m_sreg &= (~EQSPIF_WEL_FLAG);
|
| 202 |
|
|
m_sreg |= (EQSPIF_WIP_FLAG);
|
| 203 |
|
|
} else if (EQSPIF_WRLOCK == m_state) {
|
| 204 |
|
|
if (m_debug) printf("Actually writing lock register\n");
|
| 205 |
|
|
m_write_count = tW;
|
| 206 |
|
|
m_state = EQSPIF_IDLE;
|
| 207 |
|
|
} else if (EQSPIF_CLRFLAGS == m_state) {
|
| 208 |
|
|
if (m_debug) printf("Actually clearing the flags register bits\n");
|
| 209 |
|
|
m_state = EQSPIF_IDLE;
|
| 210 |
|
|
m_flagreg &= 0x09f;
|
| 211 |
|
|
} else if (m_state == EQSPIF_SUBSECTOR_ERASE) {
|
| 212 |
|
|
if (m_debug) printf("Actually Erasing subsector, from %08x\n", m_addr);
|
| 213 |
|
|
if (m_debug) printf("CK = %d & 7 = %d\n", m_count, m_count & 0x07);
|
| 214 |
|
|
assert(((m_count & 7)==0)&&(m_count == 32));
|
| 215 |
|
|
assert((m_lockregs[(m_addr>>16)&0x0ff]&0x1)==0);
|
| 216 |
|
|
m_write_count = tSS;
|
| 217 |
|
|
m_state = EQSPIF_IDLE;
|
| 218 |
|
|
m_sreg &= (~EQSPIF_WEL_FLAG);
|
| 219 |
|
|
m_sreg |= (EQSPIF_WIP_FLAG);
|
| 220 |
|
|
m_addr &= (-1<<12);
|
| 221 |
|
|
for(int i=0; i<(1<<12); i++)
|
| 222 |
|
|
m_mem[m_addr + i] = 0x0ff;
|
| 223 |
|
|
if (m_debug) printf("Now waiting %d ticks delay\n", m_write_count);
|
| 224 |
|
|
} else if (m_state == EQSPIF_SECTOR_ERASE) {
|
| 225 |
|
|
if (m_debug) printf("Actually Erasing sector, from %08x\n", m_addr);
|
| 226 |
|
|
m_write_count = tSE;
|
| 227 |
|
|
if (m_debug) printf("CK = %d & 7 = %d\n", m_count, m_count & 0x07);
|
| 228 |
|
|
assert(((m_count & 7)==0)&&(m_count == 32));
|
| 229 |
|
|
assert((m_lockregs[(m_addr>>16)&0x0ff]&0x1)==0);
|
| 230 |
|
|
m_state = EQSPIF_IDLE;
|
| 231 |
|
|
m_sreg &= (~EQSPIF_WEL_FLAG);
|
| 232 |
|
|
m_sreg |= (EQSPIF_WIP_FLAG);
|
| 233 |
|
|
m_addr &= (-1<<16);
|
| 234 |
|
|
for(int i=0; i<(1<<16); i++)
|
| 235 |
|
|
m_mem[m_addr + i] = 0x0ff;
|
| 236 |
|
|
if (m_debug) printf("Now waiting %d ticks delay\n", m_write_count);
|
| 237 |
|
|
} else if (m_state == EQSPIF_BULK_ERASE) {
|
| 238 |
|
|
m_write_count = tBE;
|
| 239 |
|
|
m_state = EQSPIF_IDLE;
|
| 240 |
|
|
m_sreg &= (~EQSPIF_WEL_FLAG);
|
| 241 |
|
|
m_sreg |= (EQSPIF_WIP_FLAG);
|
| 242 |
|
|
// Should I be checking the lock register(s) here?
|
| 243 |
|
|
for(int i=0; i<MEMBYTES; i++)
|
| 244 |
|
|
m_mem[i] = 0x0ff;
|
| 245 |
|
|
} else if (m_state == EQSPIF_PROGRAM_OTP) {
|
| 246 |
|
|
// Program the One-Time Programmable (OTP memory
|
| 247 |
|
|
if (m_debug) printf("EQSPI: OTP Program write cycle begins\n");
|
| 248 |
|
|
if (m_debug) printf("CK = %d & 7 = %d\n", m_count, m_count & 0x07);
|
| 249 |
|
|
// assert((m_lockregs[(m_addr>>16)&0x0ff]&0x1)==0);
|
| 250 |
|
|
assert((m_count & 7)==0);
|
| 251 |
|
|
m_write_count = tPP; // OTP cycle time as well
|
| 252 |
|
|
m_state = EQSPIF_IDLE;
|
| 253 |
|
|
m_sreg &= (~EQSPIF_WEL_FLAG);
|
| 254 |
|
|
m_sreg |= (EQSPIF_WIP_FLAG);
|
| 255 |
|
|
for(int i=0; i<65; i++)
|
| 256 |
|
|
m_otp[i] &= m_pmem[i];
|
| 257 |
|
|
m_otp_wp = ((m_otp[64]&1)==0);
|
| 258 |
|
|
/*
|
| 259 |
|
|
} else if (m_state == EQSPIF_DEEP_POWER_DOWN) {
|
| 260 |
|
|
m_write_count = tDP;
|
| 261 |
|
|
m_state = EQSPIF_IDLE;
|
| 262 |
|
|
} else if (m_state == EQSPIF_RELEASE) {
|
| 263 |
|
|
m_write_count = tRES;
|
| 264 |
|
|
m_state = EQSPIF_IDLE;
|
| 265 |
|
|
*/
|
| 266 |
|
|
} else if (m_state == EQSPIF_QUAD_READ_CMD) {
|
| 267 |
|
|
m_state = EQSPIF_IDLE;
|
| 268 |
|
|
if (m_mode_byte!=0)
|
| 269 |
|
|
m_quad_mode = false;
|
| 270 |
|
|
else
|
| 271 |
|
|
m_state = EQSPIF_XIP;
|
| 272 |
|
|
} else if (m_state == EQSPIF_QUAD_READ) {
|
| 273 |
|
|
m_state = EQSPIF_IDLE;
|
| 274 |
|
|
if (m_mode_byte!=0)
|
| 275 |
|
|
m_quad_mode = false;
|
| 276 |
|
|
else
|
| 277 |
|
|
m_state = EQSPIF_XIP;
|
| 278 |
|
|
// } else if (m_state == EQSPIF_XIP) {
|
| 279 |
|
|
}
|
| 280 |
|
|
|
| 281 |
|
|
m_oreg = 0x0fe;
|
| 282 |
|
|
m_count= 0;
|
| 283 |
|
|
int out = m_nxtout[3];
|
| 284 |
|
|
m_nxtout[3] = m_nxtout[2];
|
| 285 |
|
|
m_nxtout[2] = m_nxtout[1];
|
| 286 |
|
|
m_nxtout[1] = m_nxtout[0];
|
| 287 |
|
|
m_nxtout[0] = dat;
|
| 288 |
|
|
return out;
|
| 289 |
|
|
} else if ((!m_last_sck)||(sck == m_last_sck)) {
|
| 290 |
|
|
// Only change on the falling clock edge
|
| 291 |
|
|
// printf("SFLASH-SKIP, CLK=%d -> %d\n", m_last_sck, sck);
|
| 292 |
|
|
m_last_sck = sck;
|
| 293 |
|
|
int out = m_nxtout[3];
|
| 294 |
|
|
m_nxtout[3] = m_nxtout[2];
|
| 295 |
|
|
m_nxtout[2] = m_nxtout[1];
|
| 296 |
|
|
m_nxtout[1] = m_nxtout[0];
|
| 297 |
|
|
if (m_quad_mode)
|
| 298 |
|
|
m_nxtout[0] = (m_oreg>>8)&0x0f;
|
| 299 |
|
|
else
|
| 300 |
|
|
// return ((m_oreg & 0x0100)?2:0) | (dat & 0x0d);
|
| 301 |
|
|
m_nxtout[0] = (m_oreg & 0x0100)?2:0;
|
| 302 |
|
|
return out;
|
| 303 |
|
|
}
|
| 304 |
|
|
|
| 305 |
|
|
// We'll only get here if ...
|
| 306 |
|
|
// last_sck = 1, and sck = 0, thus transitioning on the
|
| 307 |
|
|
// negative edge as with everything else in this interface
|
| 308 |
|
|
if (m_quad_mode) {
|
| 309 |
|
|
m_ireg = (m_ireg << 4) | (dat & 0x0f);
|
| 310 |
|
|
m_count+=4;
|
| 311 |
|
|
m_oreg <<= 4;
|
| 312 |
|
|
} else {
|
| 313 |
|
|
m_ireg = (m_ireg << 1) | (dat & 1);
|
| 314 |
|
|
m_count++;
|
| 315 |
|
|
m_oreg <<= 1;
|
| 316 |
|
|
}
|
| 317 |
|
|
|
| 318 |
|
|
|
| 319 |
|
|
// printf("PROCESS, COUNT = %d, IREG = %02x\n", m_count, m_ireg);
|
| 320 |
|
|
if (m_state == EQSPIF_XIP) {
|
| 321 |
|
|
assert(m_quad_mode);
|
| 322 |
|
|
if (m_count == 24) {
|
| 323 |
|
|
if (m_debug) printf("EQSPI: Entering from Quad-Read Idle to Quad-Read\n");
|
| 324 |
|
|
if (m_debug) printf("EQSPI: QI/O Idle Addr = %02x\n", m_ireg&0x0ffffff);
|
| 325 |
|
|
m_addr = (m_ireg) & 0x0ffffff;
|
| 326 |
|
|
assert((m_addr & 0xfc00000)==0);
|
| 327 |
|
|
m_state = EQSPIF_QUAD_READ;
|
| 328 |
|
|
} m_oreg = 0;
|
| 329 |
|
|
} else if (m_count == 8) {
|
| 330 |
|
|
QOREG(0x0a5);
|
| 331 |
|
|
// printf("SFLASH-CMD = %02x\n", m_ireg & 0x0ff);
|
| 332 |
|
|
// Figure out what command we've been given
|
| 333 |
|
|
if (m_debug) printf("SPI FLASH CMD %02x\n", m_ireg&0x0ff);
|
| 334 |
|
|
switch(m_ireg & 0x0ff) {
|
| 335 |
|
|
case 0x01: // Write status register
|
| 336 |
|
|
if (2 !=(m_sreg & 0x203)) {
|
| 337 |
|
|
if (m_debug) printf("EQSPI: WEL not set, cannot write status reg\n");
|
| 338 |
|
|
m_state = EQSPIF_INVALID;
|
| 339 |
|
|
} else
|
| 340 |
|
|
m_state = EQSPIF_WRSR;
|
| 341 |
|
|
break;
|
| 342 |
|
|
case 0x02: // Normal speed (normal SPI, 1wire MOSI) Page program
|
| 343 |
|
|
if (2 != (m_sreg & 0x203)) {
|
| 344 |
|
|
if (m_debug) printf("EQSPI: Cannot program at this time, SREG = %x\n", m_sreg);
|
| 345 |
|
|
m_state = EQSPIF_INVALID;
|
| 346 |
|
|
} else {
|
| 347 |
|
|
m_state = EQSPIF_PP;
|
| 348 |
|
|
if (m_debug) printf("PAGE-PROGRAM COMMAND ACCEPTED\n");
|
| 349 |
|
|
}
|
| 350 |
|
|
break;
|
| 351 |
|
|
case 0x03: // Read data bytes
|
| 352 |
|
|
// Our clock won't support this command, so go
|
| 353 |
|
|
// to an invalid state
|
| 354 |
|
|
if (m_debug) printf("EQSPI INVALID: This sim does not support slow reading\n");
|
| 355 |
|
|
m_state = EQSPIF_INVALID;
|
| 356 |
|
|
break;
|
| 357 |
|
|
case 0x04: // Write disable
|
| 358 |
|
|
m_state = EQSPIF_IDLE;
|
| 359 |
|
|
m_sreg &= (~EQSPIF_WEL_FLAG);
|
| 360 |
|
|
break;
|
| 361 |
|
|
case 0x05: // Read status register
|
| 362 |
|
|
m_state = EQSPIF_RDSR;
|
| 363 |
|
|
if (m_debug) printf("EQSPI: READING STATUS REGISTER: %02x\n", m_sreg);
|
| 364 |
|
|
QOREG(m_sreg);
|
| 365 |
|
|
break;
|
| 366 |
|
|
case 0x06: // Write enable
|
| 367 |
|
|
m_state = EQSPIF_IDLE;
|
| 368 |
|
|
m_sreg |= EQSPIF_WEL_FLAG;
|
| 369 |
|
|
if (m_debug) printf("EQSPI: WRITE-ENABLE COMMAND ACCEPTED\n");
|
| 370 |
|
|
break;
|
| 371 |
|
|
case 0x0b: // Here's the read that we support
|
| 372 |
|
|
if (m_debug) printf("EQSPI: FAST-READ (single-bit)\n");
|
| 373 |
|
|
m_state = EQSPIF_FAST_READ;
|
| 374 |
|
|
break;
|
| 375 |
|
|
case 0x20: // Subsector Erase
|
| 376 |
|
|
if (2 != (m_sreg & 0x203)) {
|
| 377 |
|
|
if (m_debug) printf("EQSPI: WEL not set, cannot do a subsector erase\n");
|
| 378 |
|
|
m_state = EQSPIF_INVALID;
|
| 379 |
|
|
assert(0&&"WEL not set");
|
| 380 |
|
|
} else
|
| 381 |
|
|
m_state = EQSPIF_SUBSECTOR_ERASE;
|
| 382 |
|
|
break;
|
| 383 |
|
|
case 0x32: // QUAD Page program, 4 bits at a time
|
| 384 |
|
|
if (2 != (m_sreg & 0x203)) {
|
| 385 |
|
|
if (m_debug) printf("EQSPI: Cannot program at this time, SREG = %x\n", m_sreg);
|
| 386 |
|
|
m_state = EQSPIF_INVALID;
|
| 387 |
|
|
assert(0&&"WEL not set");
|
| 388 |
|
|
} else {
|
| 389 |
|
|
m_state = EQSPIF_QPP;
|
| 390 |
|
|
if (m_debug) printf("EQSPI: QUAD-PAGE-PROGRAM COMMAND ACCEPTED\n");
|
| 391 |
|
|
if (m_debug) printf("EQSPI: pmem = %08lx\n", (unsigned long)m_pmem);
|
| 392 |
|
|
}
|
| 393 |
|
|
break;
|
| 394 |
|
|
case 0x42: // Program OTP array
|
| 395 |
|
|
if (2 != (m_sreg & 0x203)) {
|
| 396 |
|
|
if (m_debug) printf("EQSPI: WEL not set, cannot program OTP\n");
|
| 397 |
|
|
m_state = EQSPIF_INVALID;
|
| 398 |
|
|
} else if (m_otp_wp) {
|
| 399 |
|
|
if (m_debug) printf("EQSPI: OTP Write protect is set, cannot program OTP ever again\n");
|
| 400 |
|
|
m_state = EQSPIF_INVALID;
|
| 401 |
|
|
} else
|
| 402 |
|
|
m_state = EQSPIF_PROGRAM_OTP;
|
| 403 |
|
|
break;
|
| 404 |
|
|
case 0x4b: // Read OTP array
|
| 405 |
|
|
m_state = EQSPIF_READ_OTP;
|
| 406 |
|
|
QOREG(0);
|
| 407 |
|
|
if (m_debug) printf("EQSPI: Read OTP array command\n");
|
| 408 |
|
|
break;
|
| 409 |
|
|
case 0x50: // Clear flag status register
|
| 410 |
|
|
m_state = EQSPIF_CLRFLAGS;
|
| 411 |
|
|
if (m_debug) printf("EQSPI: Clearing FLAGSTATUS REGISTER: %02x\n", m_flagreg);
|
| 412 |
|
|
QOREG(m_flagreg);
|
| 413 |
|
|
break;
|
| 414 |
|
|
case 0x61: // WRITE Enhanced volatile config register
|
| 415 |
|
|
m_state = EQSPIF_WREVCONFIG;
|
| 416 |
|
|
if (m_debug) printf("EQSPI: WRITING EVCONFIG REGISTER\n");
|
| 417 |
|
|
break;
|
| 418 |
|
|
case 0x65: // Read Enhanced volatile config register
|
| 419 |
|
|
m_state = EQSPIF_RDEVCONFIG;
|
| 420 |
|
|
if (m_debug) printf("EQSPI: READING EVCONFIG REGISTER: %02x\n", m_evconfig);
|
| 421 |
|
|
QOREG(m_evconfig);
|
| 422 |
|
|
break;
|
| 423 |
|
|
case 0x06b:
|
| 424 |
|
|
m_state = EQSPIF_QUAD_READ_CMD;
|
| 425 |
|
|
// m_quad_mode = true; // Not yet, need to wait past dummy registers
|
| 426 |
|
|
break;
|
| 427 |
|
|
case 0x70: // Read flag status register
|
| 428 |
|
|
m_state = EQSPIF_RDFLAGS;
|
| 429 |
|
|
if (m_debug) printf("EQSPI: READING FLAGSTATUS REGISTER: %02x\n", m_flagreg);
|
| 430 |
|
|
QOREG(m_flagreg);
|
| 431 |
|
|
break;
|
| 432 |
|
|
case 0x81: // Write volatile config register
|
| 433 |
|
|
m_state = EQSPIF_WRCR;
|
| 434 |
14 |
dgisselq |
if (m_debug) printf("EQSPI: WRITING VOLATILE CONFIG REGISTER: %02x\n", m_vconfig);
|
| 435 |
12 |
dgisselq |
break;
|
| 436 |
|
|
case 0x85: // Read volatile config register
|
| 437 |
|
|
m_state = EQSPIF_RDCR;
|
| 438 |
14 |
dgisselq |
if (m_debug) printf("EQSPI: READING VOLATILE CONFIG REGISTER: %02x\n", m_vconfig);
|
| 439 |
|
|
QOREG(m_vconfig);
|
| 440 |
12 |
dgisselq |
break;
|
| 441 |
|
|
case 0x9e: // Read ID (fall through)
|
| 442 |
|
|
case 0x9f: // Read ID
|
| 443 |
|
|
m_state = EQSPIF_RDID; m_addr = 0;
|
| 444 |
|
|
if (m_debug) printf("EQSPI: READING ID\n");
|
| 445 |
|
|
QOREG(IDSTR[0]);
|
| 446 |
|
|
break;
|
| 447 |
|
|
case 0xb1: // Write nonvolatile config register
|
| 448 |
|
|
m_state = EQSPIF_WRNVCONFIG;
|
| 449 |
|
|
if (m_debug) printf("EQSPI: WRITING NVCONFIG REGISTER: %02x\n", m_nvconfig);
|
| 450 |
|
|
break;
|
| 451 |
|
|
case 0xb5: // Read nonvolatile config register
|
| 452 |
|
|
m_state = EQSPIF_RDNVCONFIG;
|
| 453 |
|
|
if (m_debug) printf("EQSPI: READING NVCONFIG REGISTER: %02x\n", m_nvconfig);
|
| 454 |
|
|
QOREG(m_nvconfig>>8);
|
| 455 |
|
|
break;
|
| 456 |
|
|
case 0xc7: // Bulk Erase
|
| 457 |
|
|
if (2 != (m_sreg & 0x203)) {
|
| 458 |
|
|
if (m_debug) printf("EQSPI: WEL not set, cannot erase device\n");
|
| 459 |
|
|
m_state = EQSPIF_INVALID;
|
| 460 |
|
|
} else
|
| 461 |
|
|
m_state = EQSPIF_BULK_ERASE;
|
| 462 |
|
|
break;
|
| 463 |
|
|
case 0xd8: // Sector Erase
|
| 464 |
|
|
if (2 != (m_sreg & 0x203)) {
|
| 465 |
|
|
if (m_debug) printf("EQSPI: WEL not set, cannot erase sector\n");
|
| 466 |
|
|
m_state = EQSPIF_INVALID;
|
| 467 |
|
|
assert(0&&"WEL not set");
|
| 468 |
|
|
} else {
|
| 469 |
|
|
m_state = EQSPIF_SECTOR_ERASE;
|
| 470 |
|
|
if (m_debug) printf("EQSPI: SECTOR_ERASE COMMAND\n");
|
| 471 |
|
|
}
|
| 472 |
|
|
break;
|
| 473 |
|
|
case 0xe5: // Write lock register
|
| 474 |
|
|
m_state = EQSPIF_WRLOCK;
|
| 475 |
|
|
if (m_debug) printf("EQSPI: WRITING LOCK REGISTER\n");
|
| 476 |
|
|
break;
|
| 477 |
|
|
case 0xe8: // Read lock register
|
| 478 |
|
|
m_state = EQSPIF_RDLOCK;
|
| 479 |
|
|
if (m_debug) printf("EQSPI: READ LOCK REGISTER (Waiting on address)\n");
|
| 480 |
|
|
break;
|
| 481 |
|
|
case 0x0eb: // Here's the (other) read that we support
|
| 482 |
|
|
// printf("EQSPI: QUAD-I/O-READ\n");
|
| 483 |
|
|
// m_state = EQSPIF_QUAD_READ_CMD;
|
| 484 |
|
|
// m_quad_mode = true;
|
| 485 |
|
|
assert(0 && "Quad Input/Output fast read not supported");
|
| 486 |
|
|
break;
|
| 487 |
|
|
default:
|
| 488 |
|
|
printf("EQSPI: UNRECOGNIZED SPI FLASH CMD: %02x\n", m_ireg&0x0ff);
|
| 489 |
|
|
m_state = EQSPIF_INVALID;
|
| 490 |
|
|
assert(0 && "Unrecognized command\n");
|
| 491 |
|
|
break;
|
| 492 |
|
|
}
|
| 493 |
|
|
} else if ((0 == (m_count&0x07))&&(m_count != 0)) {
|
| 494 |
|
|
QOREG(0);
|
| 495 |
|
|
switch(m_state) {
|
| 496 |
|
|
case EQSPIF_IDLE:
|
| 497 |
|
|
printf("TOO MANY CLOCKS, SPIF in IDLE\n");
|
| 498 |
|
|
break;
|
| 499 |
|
|
case EQSPIF_WRSR:
|
| 500 |
|
|
if (m_count == 16) {
|
| 501 |
|
|
m_sreg = (m_sreg & 0x07c) | (m_ireg & 0x07c);
|
| 502 |
|
|
if (m_debug) printf("Request to set sreg to 0x%02x\n",
|
| 503 |
|
|
m_ireg&0x0ff);
|
| 504 |
|
|
} else {
|
| 505 |
|
|
printf("TOO MANY CLOCKS FOR WRR!!!\n");
|
| 506 |
|
|
exit(-2);
|
| 507 |
|
|
m_state = EQSPIF_IDLE;
|
| 508 |
|
|
}
|
| 509 |
|
|
break;
|
| 510 |
|
|
case EQSPIF_WRCR: // Write volatile config register, 0x81
|
| 511 |
14 |
dgisselq |
if (m_count == 8+8) {
|
| 512 |
|
|
m_vconfig = m_ireg & 0x0ff;
|
| 513 |
|
|
printf("Setting volatile config register to %08x\n", m_vconfig);
|
| 514 |
|
|
assert((m_vconfig & 0xfb)==0x8b);
|
| 515 |
12 |
dgisselq |
} break;
|
| 516 |
|
|
case EQSPIF_WRNVCONFIG: // Write nonvolatile config register
|
| 517 |
14 |
dgisselq |
if (m_count == 8+8) {
|
| 518 |
12 |
dgisselq |
m_nvconfig = m_ireg & 0x0ffdf;
|
| 519 |
14 |
dgisselq |
printf("Setting nonvolatile config register to %08x\n", m_nvconfig);
|
| 520 |
12 |
dgisselq |
assert((m_nvconfig & 0xffc5)==0x8fc5);
|
| 521 |
|
|
} break;
|
| 522 |
|
|
case EQSPIF_WREVCONFIG: // Write enhanced volatile config reg
|
| 523 |
14 |
dgisselq |
if (m_count == 8+8) {
|
| 524 |
12 |
dgisselq |
m_evconfig = m_ireg & 0x0ff;
|
| 525 |
|
|
printf("Setting enhanced volatile config register to %08x\n", m_evconfig);
|
| 526 |
|
|
assert((m_evconfig & 0x0d7)==0xd7);
|
| 527 |
|
|
} break;
|
| 528 |
|
|
case EQSPIF_WRLOCK:
|
| 529 |
|
|
if (m_count == 32) {
|
| 530 |
|
|
m_addr = (m_ireg>>24)&0x0ff;
|
| 531 |
|
|
if ((m_lockregs[m_addr]&2)==0)
|
| 532 |
|
|
m_lockregs[m_addr] = m_ireg&3;
|
| 533 |
|
|
printf("Setting lock register[%02x] to %d\n", m_addr, m_lockregs[m_addr]);
|
| 534 |
|
|
assert((m_config & 0xfb)==0x8b);
|
| 535 |
|
|
} break;
|
| 536 |
|
|
case EQSPIF_RDLOCK:
|
| 537 |
|
|
if (m_count == 24) {
|
| 538 |
|
|
m_addr = (m_ireg>>16)&0x0ff;
|
| 539 |
|
|
QOREG(m_lockregs[m_addr]);
|
| 540 |
|
|
printf("Reading lock register[%02x]: %d\n", m_addr, m_lockregs[m_addr]);
|
| 541 |
|
|
} else
|
| 542 |
|
|
QOREG(m_lockregs[m_addr]);
|
| 543 |
|
|
break;
|
| 544 |
|
|
case EQSPIF_CLRFLAGS:
|
| 545 |
|
|
assert(0 && "Too many clocks for CLSR command!!\n");
|
| 546 |
|
|
break;
|
| 547 |
|
|
case EQSPIF_READ_OTP:
|
| 548 |
|
|
if (m_count == 32) {
|
| 549 |
|
|
m_addr = m_ireg & 0x0ffffff;
|
| 550 |
|
|
assert(m_addr < 65);
|
| 551 |
|
|
m_otp[64] = (m_otp_wp)?0:1;
|
| 552 |
|
|
|
| 553 |
|
|
if (m_debug) printf("READOTP, SETTING ADDR = %08x (%02x:%02x:%02x:%02x)\n", m_addr,
|
| 554 |
|
|
((m_addr<65)?m_otp[m_addr]:0)&0x0ff,
|
| 555 |
|
|
((m_addr<64)?m_otp[m_addr+1]:0)&0x0ff,
|
| 556 |
|
|
((m_addr<63)?m_otp[m_addr+2]:0)&0x0ff,
|
| 557 |
|
|
((m_addr<62)?m_otp[m_addr+3]:0)&0x0ff);
|
| 558 |
|
|
if (m_debug) printf("READOTP, Array is %s, m_otp[64] = %d\n",
|
| 559 |
|
|
(m_otp_wp)?"Locked":"Unlocked",
|
| 560 |
|
|
m_otp[64]);
|
| 561 |
|
|
QOREG(m_otp[m_addr]);
|
| 562 |
|
|
} else if (m_count < 40) {
|
| 563 |
|
|
} // else if (m_count == 40)
|
| 564 |
|
|
else if ((m_count&7)==0) {
|
| 565 |
|
|
if (m_debug) printf("READOTP, ADDR = %08x\n", m_addr);
|
| 566 |
|
|
if (m_addr < 65)
|
| 567 |
|
|
QOREG(m_otp[m_addr]);
|
| 568 |
|
|
else
|
| 569 |
|
|
QOREG(0);
|
| 570 |
|
|
if (m_debug) printf("EQSPI: READING OTP, %02x%s\n",
|
| 571 |
|
|
(m_addr<65)?m_otp[m_addr]&0x0ff:0xfff,
|
| 572 |
|
|
(m_addr > 65)?"-- PAST OTP LENGTH!":"");
|
| 573 |
|
|
m_addr++;
|
| 574 |
|
|
}
|
| 575 |
|
|
break;
|
| 576 |
|
|
case EQSPIF_RDID:
|
| 577 |
|
|
if ((m_count&7)==0) {
|
| 578 |
|
|
m_addr++;
|
| 579 |
|
|
if (m_debug) printf("READID, ADDR = %08x\n", m_addr);
|
| 580 |
|
|
if (m_addr < sizeof(IDSTR))
|
| 581 |
|
|
QOREG(IDSTR[m_addr]);
|
| 582 |
|
|
else
|
| 583 |
|
|
QOREG(0);
|
| 584 |
|
|
if (m_debug) printf("EQSPI: READING ID, %02x%s\n",
|
| 585 |
|
|
IDSTR[m_addr]&0x0ff,
|
| 586 |
|
|
(m_addr >= sizeof(IDSTR))?"-- PAST ID LENGTH!":"");
|
| 587 |
|
|
}
|
| 588 |
|
|
break;
|
| 589 |
|
|
case EQSPIF_RDSR:
|
| 590 |
|
|
// printf("Read SREG = %02x, wait = %08x\n", m_sreg,
|
| 591 |
|
|
// m_write_count);
|
| 592 |
|
|
QOREG(m_sreg);
|
| 593 |
|
|
break;
|
| 594 |
|
|
case EQSPIF_RDCR:
|
| 595 |
14 |
dgisselq |
if (m_debug) printf("Read VCONF = %02x\n", m_vconfig);
|
| 596 |
12 |
dgisselq |
QOREG(m_creg);
|
| 597 |
|
|
break;
|
| 598 |
|
|
case EQSPIF_FAST_READ:
|
| 599 |
|
|
if (m_count < 32) {
|
| 600 |
|
|
if (m_debug) printf("FAST READ, WAITING FOR FULL COMMAND (count = %d)\n", m_count);
|
| 601 |
|
|
QOREG(0x0c3);
|
| 602 |
|
|
} else if (m_count == 32) {
|
| 603 |
|
|
m_addr = m_ireg & 0x0ffffff;
|
| 604 |
|
|
if (m_debug) printf("FAST READ, ADDR = %08x\n", m_addr);
|
| 605 |
|
|
QOREG(0x0c3);
|
| 606 |
|
|
assert((m_addr & 0xf000003)==0);
|
| 607 |
|
|
} else if ((m_count >= 40)&&(0 == (m_sreg&0x01))) {
|
| 608 |
|
|
if (m_count == 40)
|
| 609 |
|
|
printf("DUMMY BYTE COMPLETE ...\n");
|
| 610 |
|
|
QOREG(m_mem[m_addr++]);
|
| 611 |
|
|
if (m_debug) printf("SPIF[%08x] = %02x -> %02x\n", m_addr-1, m_mem[m_addr-1]&0x0ff, m_oreg);
|
| 612 |
|
|
} else if (0 != (m_sreg&0x01)) {
|
| 613 |
|
|
m_oreg = 0;
|
| 614 |
|
|
if (m_debug) printf("CANNOT READ WHEN WRITE IN PROGRESS, m_sreg = %02x\n", m_sreg);
|
| 615 |
|
|
} else printf("How did I get here, m_count = %d\n", m_count);
|
| 616 |
|
|
break;
|
| 617 |
|
|
case EQSPIF_QUAD_READ_CMD:
|
| 618 |
|
|
// The command to go into quad read mode took 8 bits
|
| 619 |
|
|
// that changes the timings, else we'd use quad_Read
|
| 620 |
|
|
// below
|
| 621 |
|
|
if (m_count == 32) {
|
| 622 |
|
|
m_addr = m_ireg & 0x0ffffff;
|
| 623 |
|
|
// printf("FAST READ, ADDR = %08x\n", m_addr);
|
| 624 |
|
|
printf("EQSPI: QUAD READ, ADDR = %06x (%02x:%02x:%02x:%02x)\n", m_addr,
|
| 625 |
|
|
(m_addr<0x1000000)?(m_mem[m_addr]&0x0ff):0,
|
| 626 |
|
|
(m_addr<0x0ffffff)?(m_mem[m_addr+1]&0x0ff):0,
|
| 627 |
|
|
(m_addr<0x0fffffe)?(m_mem[m_addr+2]&0x0ff):0,
|
| 628 |
|
|
(m_addr<0x0fffffd)?(m_mem[m_addr+3]&0x0ff):0);
|
| 629 |
|
|
assert((m_addr & (~(MEMBYTES-1)))==0);
|
| 630 |
|
|
} else if (m_count == 32+8) {
|
| 631 |
|
|
QOREG(m_mem[m_addr++]);
|
| 632 |
|
|
m_quad_mode = true;
|
| 633 |
|
|
m_mode_byte = (m_ireg & 0x080);
|
| 634 |
|
|
printf("EQSPI: (QUAD) MODE BYTE = %02x\n", m_mode_byte);
|
| 635 |
|
|
} else if ((m_count > 32+8)&&(0 == (m_sreg&0x01))) {
|
| 636 |
|
|
QOREG(m_mem[m_addr++]);
|
| 637 |
|
|
// printf("EQSPIF[%08x]/QR = %02x\n",
|
| 638 |
|
|
// m_addr-1, m_oreg);
|
| 639 |
|
|
} else {
|
| 640 |
14 |
dgisselq |
// printf("ERR: EQSPIF--TRYING TO READ WHILE BUSY! (count = %d)\n", m_count);
|
| 641 |
12 |
dgisselq |
m_oreg = 0;
|
| 642 |
|
|
}
|
| 643 |
|
|
break;
|
| 644 |
|
|
case EQSPIF_QUAD_READ:
|
| 645 |
|
|
if (m_count == 24+8*4) {// Requires 8 QUAD clocks
|
| 646 |
|
|
m_mode_byte = (m_ireg>>24) & 0x10;
|
| 647 |
|
|
printf("EQSPI/QR: MODE BYTE = %02x\n", m_mode_byte);
|
| 648 |
|
|
QOREG(m_mem[m_addr++]);
|
| 649 |
|
|
} else if ((m_count >= 64)&&(0 == (m_sreg&0x01))) {
|
| 650 |
|
|
QOREG(m_mem[m_addr++]);
|
| 651 |
|
|
printf("EQSPIF[%08x]/QR = %02x\n", m_addr-1, m_oreg & 0x0ff);
|
| 652 |
|
|
} else {
|
| 653 |
|
|
m_oreg = 0;
|
| 654 |
|
|
printf("EQSPI/QR ... m_count = %d\n", m_count);
|
| 655 |
|
|
}
|
| 656 |
|
|
break;
|
| 657 |
|
|
case EQSPIF_PP:
|
| 658 |
|
|
if (m_count == 32) {
|
| 659 |
|
|
m_addr = m_ireg & 0x0ffffff;
|
| 660 |
|
|
if (m_debug) printf("EQSPI: PAGE-PROGRAM ADDR = %06x\n", m_addr);
|
| 661 |
|
|
assert((m_addr & 0xfc00000)==0);
|
| 662 |
|
|
// m_page = m_addr >> 8;
|
| 663 |
|
|
for(int i=0; i<256; i++)
|
| 664 |
|
|
m_pmem[i] = 0x0ff;
|
| 665 |
|
|
} else if (m_count >= 40) {
|
| 666 |
|
|
m_pmem[m_addr & 0x0ff] = m_ireg & 0x0ff;
|
| 667 |
|
|
// printf("EQSPI: PMEM[%02x] = 0x%02x -> %02x\n", m_addr & 0x0ff, m_ireg & 0x0ff, (m_pmem[(m_addr & 0x0ff)]&0x0ff));
|
| 668 |
|
|
m_addr = (m_addr & (~0x0ff)) | ((m_addr+1)&0x0ff);
|
| 669 |
|
|
} break;
|
| 670 |
|
|
case EQSPIF_QPP:
|
| 671 |
|
|
if (m_count == 32) {
|
| 672 |
|
|
m_addr = m_ireg & 0x0ffffff;
|
| 673 |
|
|
m_quad_mode = true;
|
| 674 |
|
|
if (m_debug) printf("EQSPI/QR: PAGE-PROGRAM ADDR = %06x\n", m_addr);
|
| 675 |
|
|
assert((m_addr & 0xfc00000)==0);
|
| 676 |
|
|
// m_page = m_addr >> 8;
|
| 677 |
|
|
for(int i=0; i<256; i++)
|
| 678 |
|
|
m_pmem[i] = 0x0ff;
|
| 679 |
|
|
} else if (m_count >= 40) {
|
| 680 |
|
|
m_pmem[m_addr & 0x0ff] = m_ireg & 0x0ff;
|
| 681 |
|
|
// printf("EQSPI/QR: PMEM[%02x] = 0x%02x -> %02x\n", m_addr & 0x0ff, m_ireg & 0x0ff, (m_pmem[(m_addr & 0x0ff)]&0x0ff));
|
| 682 |
|
|
m_addr = (m_addr & (~0x0ff)) | ((m_addr+1)&0x0ff);
|
| 683 |
|
|
} break;
|
| 684 |
|
|
case EQSPIF_SUBSECTOR_ERASE:
|
| 685 |
|
|
if (m_count == 32) {
|
| 686 |
|
|
m_addr = m_ireg & 0x0fff000;
|
| 687 |
|
|
if (m_debug) printf("SUBSECTOR_ERASE ADDRESS = %08x\n", m_addr);
|
| 688 |
|
|
assert((m_addr & 0xff000000)==0);
|
| 689 |
|
|
} break;
|
| 690 |
|
|
case EQSPIF_SECTOR_ERASE:
|
| 691 |
|
|
if (m_count == 32) {
|
| 692 |
|
|
m_addr = m_ireg & 0x0ff0000;
|
| 693 |
|
|
if (m_debug) printf("SECTOR_ERASE ADDRESS = %08x\n", m_addr);
|
| 694 |
|
|
assert((m_addr & 0xf000000)==0);
|
| 695 |
|
|
} break;
|
| 696 |
|
|
case EQSPIF_PROGRAM_OTP:
|
| 697 |
|
|
if (m_count == 32) {
|
| 698 |
|
|
m_addr = m_ireg & 0x0ff;
|
| 699 |
|
|
for(int i=0; i<65; i++)
|
| 700 |
|
|
m_pmem[i] = 0x0ff;
|
| 701 |
|
|
} else if ((m_count >= 40)&&(m_addr < 65)) {
|
| 702 |
|
|
m_pmem[m_addr++] = m_ireg & 0x0ff;
|
| 703 |
|
|
} break;
|
| 704 |
|
|
/*
|
| 705 |
|
|
case EQSPIF_RELEASE:
|
| 706 |
|
|
if (m_count >= 32) {
|
| 707 |
|
|
QOREG(DEVESD);
|
| 708 |
|
|
} break;
|
| 709 |
|
|
*/
|
| 710 |
|
|
default:
|
| 711 |
|
|
printf("EQSPI ... DEFAULT OP???\n");
|
| 712 |
|
|
QOREG(0xff);
|
| 713 |
|
|
break;
|
| 714 |
|
|
}
|
| 715 |
|
|
} // else printf("SFLASH->count = %d\n", m_count);
|
| 716 |
|
|
|
| 717 |
|
|
m_last_sck = sck;
|
| 718 |
|
|
int out = m_nxtout[3];
|
| 719 |
|
|
m_nxtout[3] = m_nxtout[2];
|
| 720 |
|
|
m_nxtout[2] = m_nxtout[1];
|
| 721 |
|
|
m_nxtout[1] = m_nxtout[0];
|
| 722 |
|
|
if (m_quad_mode)
|
| 723 |
|
|
m_nxtout[0] = (m_oreg>>8)&0x0f;
|
| 724 |
|
|
else
|
| 725 |
|
|
m_nxtout[0] = (m_oreg & 0x0100)?2:0;
|
| 726 |
|
|
return out;
|
| 727 |
|
|
}
|
| 728 |
|
|
|
