Subversion Repositories spi_master_slave

-- TestBench Template 

library ieee;

use ieee.std_logic_1164.all;

use ieee.numeric_std.all;

entity testbench is

end testbench;

architecture behavior of testbench is

    --=============================================================================================

    -- Constants

    --=============================================================================================

    -- clock period

    constant SCLK_PERIOD : time := 11 ns;           -- serial high speed clock

    constant PCLK_PERIOD : time := 10 ns;           -- parallel high-speed clock

    -- button definitions

    constant btRESET    : integer := 0;             -- these are constants to use as btn_i(x)

    constant btUP       : integer := 1;

    constant btLEFT     : integer := 2;

    constant btDOWN     : integer := 3;

    constant btRIGHT    : integer := 4;

    constant btCENTER   : integer := 5;

    --=============================================================================================

    -- COMPONENT DECLARATIONS

    --=============================================================================================

    component spi_master_atlys_top

    port(

        sclk_i : in std_logic;

        pclk_i : in std_logic;

        sw_i : in std_logic_vector(7 downto 0);

        btn_i : in std_logic_vector(5 downto 0);

        spi_ssel_o : out std_logic;

        spi_sck_o : out std_logic;

        spi_mosi_o : out std_logic;

        spi_miso_o : out std_logic;

        led_o : out std_logic_vector(7 downto 0);

        s_do_o : out std_logic_vector (7 downto 0);

        m_do_o : out std_logic_vector (7 downto 0);

        m_state_o : out std_logic_vector (3 downto 0);

        s_state_o : out std_logic_vector (3 downto 0);

        dbg_o : out std_logic_vector(11 downto 0)

    );

    end component;

    --=============================================================================================

    -- Signals for state machine control

    --=============================================================================================

    --=============================================================================================

    -- Signals for internal operation

    --=============================================================================================

    --- clock signals ---

    signal sysclk           : std_logic := '0';                                 -- 100MHz clock

    signal pclk             : std_logic := '0';                                 -- 100MHz clock

    --- switch debouncer signals ---

    signal sw_data          : std_logic_vector (7 downto 0) := (others => '0'); -- switch data

    --- pushbutton debouncer signals ---

    signal btn_data         : std_logic_vector (5 downto 0) := (others => '0'); -- pushbuttons

    --- spi port signals ---

    signal spi_ssel         : std_logic;

    signal spi_sck          : std_logic;

    signal spi_mosi         : std_logic;

    signal spi_miso         : std_logic;

    -- debug output signals

    signal leds             : std_logic_vector (7 downto 0) := (others => '0');

    signal dbg              : std_logic_vector (11 downto 0) := (others => '0');

    -- debug ports --

    signal s_do_reg       : std_logic_vector (7 downto 0);

    signal m_do_reg       : std_logic_vector (7 downto 0);

    -- master signals mapped on dbg

    signal wren_m           : std_logic;

    signal wr_ack_m         : std_logic;

    signal di_req_m         : std_logic;

    signal do_valid_m       : std_logic;

    signal master_state     : std_logic_vector (3 downto 0);

    -- slave signals mapped on dbg

    signal wren_s           : std_logic;

    signal wr_ack_s         : std_logic;

    signal di_req_s         : std_logic;

    signal do_valid_s       : std_logic;

    signal slave_state      : std_logic_vector (3 downto 0);

begin

    --=============================================================================================

    -- COMPONENT INSTANTIATIONS FOR THE CORES UNDER TEST

    --=============================================================================================

    -- spi_master_atlys_top:

    --      receives the 100 MHz clock from the board clock oscillator

    --      receives the 8 slide switches and 5 pushbuttons as test stimuli

    --      connects to 4 spi signals

    --      connects to 8 board LEDs

    --      connects to 12 debug pins

    --      set debounce time to 2 us to save simulation time

        Inst_spi_master_atlys_top: spi_master_atlys_top

        port map(

            sclk_i => sysclk,

            pclk_i => pclk,

            spi_ssel_o => spi_ssel,

            spi_sck_o => spi_sck,

            spi_mosi_o => spi_mosi,

            spi_miso_o => spi_miso,

            sw_i => sw_data,

            btn_i => btn_data,

            led_o => leds,

            m_do_o => m_do_reg,

            s_do_o => s_do_reg,

            m_state_o => master_state,

            s_state_o => slave_state,

            dbg_o => dbg

        );

    -- master signals mapped on dbg

    wren_m      <= dbg(11);

    wr_ack_m    <= dbg(10);

    di_req_m    <= dbg(9);

    do_valid_m  <= dbg(8);

    -- slave signals mapped on dbg

    wren_s      <= dbg(7);

    wr_ack_s    <= dbg(6);

    di_req_s    <= dbg(5);

    do_valid_s  <= dbg(4);

    --=============================================================================================

    -- CLOCK GENERATION

    --=============================================================================================

    sysclk_proc: process is

    begin

        loop

            sysclk <= not sysclk;

            wait for SCLK_PERIOD / 2;

        end loop;

    end process sysclk_proc;

    pclk_proc: process is

    begin

        loop

            pclk <= not pclk;

            wait for PCLK_PERIOD / 2;

        end loop;

    end process pclk_proc;

    --=============================================================================================

    -- TEST BENCH STIMULI

    --=============================================================================================

    tb : process

    begin

        wait for 100 ns; -- wait until global set/reset completes

        btn_data(btUP) <= '1';

        wait for 1 us;

        btn_data(btUP) <= '0';

        sw_data <= X"81";

        wait for 5 us;

        sw_data <= X"65";

        wait for 5 us;

        sw_data <= X"C9";

        wait for 5 us;

        sw_data <= X"55";

        wait for 5 us;

        sw_data <= X"AA";

        wait for 5 us;

        sw_data <= X"1e";

        wait for 5 us;

        sw_data <= X"79";

        wait for 5 us;

        sw_data <= X"40";

        wait for 5 us;

        assert false report "End Simulation" severity failure; -- stop simulation

    end process tb;

    --  End Test Bench 

END;