Subversion Repositories zipcpu

///////////////////////////////////////////////////////////////////////////////

//

// Filename:    devbus.h

//

// Project:     UART to WISHBONE FPGA library

//

// Purpose:     The purpose of this file is to document an interface which

//              any devic with a bus, whether it be implemented over a UART,

//              an ethernet, or a PCI express bus, must implement.  This

//              describes only an interface, and not how that interface is

//              to be accomplished.

//

// Creator:     Dan Gisselquist

//              Gisselquist Tecnology, LLC

//

///////////////////////////////////////////////////////////////////////////////

//

// Copyright (C) 2015, Gisselquist Technology, LLC

//

// This program is free software (firmware): you can redistribute it and/or

// modify it under the terms of  the GNU General Public License as published

// by the Free Software Foundation, either version 3 of the License, or (at

// your option) any later version.

//

// This program is distributed in the hope that it will be useful, but WITHOUT

// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// License:     GPL, v3, as defined and found on www.gnu.org,

//              http://www.gnu.org/licenses/gpl.html

//

//

///////////////////////////////////////////////////////////////////////////////

//

//

#ifndef DEVBUS_H

#define DEVBUS_H

#include <unistd.h>

typedef unsigned int    uint32;

class   BUSERR {

public:

        uint32 addr;

        BUSERR(const uint32 a) : addr(a) {};

};

class   DEVBUS {

public:

        typedef uint32  BUSW;

        virtual void    kill(void) = 0;

        virtual void    close(void) = 0;

        // Write a single value to a single address

        virtual void    writeio(const BUSW a, const BUSW v) = 0;

        // Read a single value to a single address

        virtual BUSW    readio(const BUSW a) = 0;

        // Read a series of values from values from a block of memory

        virtual void    readi(const BUSW a, const int len, BUSW *buf) = 0;

        // Read a series of values from the same address in memory

        virtual void    readz(const BUSW a, const int len, BUSW *buf) = 0;

        virtual void    writei(const BUSW a, const int len, const BUSW *buf) = 0;

        virtual void    writez(const BUSW a, const int len, const BUSW *buf) = 0;

        // Query whether or not an interrupt has taken place

        virtual bool    poll(void) = 0;

        // Sleep until interrupt, but sleep no longer than msec milliseconds

        virtual void    usleep(unsigned msec) = 0;

        // Sleep until an interrupt, no matter how long it takes for that

        // interrupt to take place

        virtual void    wait(void) = 0;

        // Query whether or not a bus error has taken place.  This is somewhat

        // of a misnomer, as my current bus error detection code exits any

        // interface, but ... it is what it is.

        virtual bool    bus_err(void) const = 0;

        // Clear any bus error condition.

        virtual void    reset_err(void) = 0;

        // Clear any interrupt condition that has already been noticed by

        // the interface, does not check for further interrupt

        virtual void    clear(void) = 0;

};

#endif