OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /System09
    from Rev 147 to Rev 148
    ↔ Reverse comparison
  •

Rev 147 → Rev 148

/trunk/rtl/System09_Digilent_Atlys/Makefile
44,8 → 44,11
UCF_FILE := system09.ucf
#
# Technology family (unfortunately it cannot be extracted from ISE)
FAMILY := spartan3
FAMILY := spartan6
 
 
 
 
# List of ROM VHDL files
.PHONY: roms
roms:
52,7 → 55,7
@$(MAKE) -C ../../Tools/as09
@$(MAKE) -C ../../Tools/s19tovhd
@$(MAKE) -C ../../src/sys09bug sys09swt.vhd
@$(MAKE) -C ../../src/Flex9 flex9ide.vhd
@$(MAKE) -C ../../src/Flex9 flex9ram.vhd
 
#===================================================================
# You should not need to edit anything below this line
139,7 → 142,7
clean:
-$(MAKE) -C ../../src/sys09bug clean
-$(MAKE) -C ../../src/Flex9 clean
-$(RM) *.ncd *.cfi *_bitgen.xwbt *.ngc *.ngd *.twr *.bit *.mcs *.stx *.ucf.untf *.mrp *.ptwx *_map.map
-$(RM) *.cfi *_bitgen.xwbt *.ncd *.ngc *.ngd *.twr *.bit *.mcs *.stx *.ucf.untf *.mrp *.ptwx *_map.map
-$(RM) *.ncl *.ngm *.prm *_pad.txt *.twx *.log *.syr *.par *.exo *.xpi *.xrpt *.xml
-$(RM) *.cmd_log *.ngr *.bld *_summary.html *.nc1 *.pcf *.bgn tmp.ut
-$(RM) *.pad *.placed_ncd_tracker *.routed_ncd_tracker *_pad.csv *.drc
151,3 → 154,14
-$(MAKE) -C ../../Tools/as09 clean
-$(MAKE) -C ../../Tools/s19tovhd clean
 
XXST_FILE := $(DESIGN_NAME).xst
#XPRJ_FILE := $(shell $(AWK) '/^-ifn/ { printf("%s",$$2) }' $(SXST_FILE))
XPRJ_FILE := $(DESIGN_NAME).prj
XHDL_FILES := $(subst ",,$(shell $(AWK) '{ print $$3} ' $(XPRJ_FILE)))
 
#
foo:
@echo "FOO"
@echo "'$(XXST_FILE)'"
@echo "'$(XPRJ_FILE)'"
@echo "'$(XHDL_FILES)'"
/trunk/rtl/System09_Digilent_Atlys/system09.prj
1,8 → 1,7
vhdl work "common.vhd"
vhdl work "../VHDL/bit_funcs.vhd"
vhdl work "sdramcntl.vhd"
vhdl work "../../src/sys09bug/sys09xes.vhd"
vhdl work "../../src/Flex9/flex9ide.vhd"
vhdl work "../../src/sys09bug/sys09swt.vhd"
vhdl work "../../src/Flex9/flex9ram.vhd"
vhdl work "../VHDL/trap.vhd"
vhdl work "../VHDL/timer.vhd"
vhdl work "../VHDL/datram.vhd"
9,5 → 8,4
vhdl work "../VHDL/cpu09.vhd"
vhdl work "../VHDL/ACIA_Clock.vhd"
vhdl work "../VHDL/acia6850.vhd"
vhdl work "xsasdramcntl.vhd"
vhdl work "System09_Atlys.vhd"
vhdl work "system09.vhd"
/trunk/rtl/System09_Digilent_Atlys/system09.ucf
5,321 → 5,35
#####################################################
#
# Clocks
#
# clock pin for Atlys rev C board
NET "CLKA" LOC = "L15"; # Bank = 1, Pin name = IO_L42P_GCLK7_M1UDM, Type = GCLK, Sch name = GCLK
 
#
net CLKA loc=T9 | IOSTANDARD = LVCMOS33 ; # 100MHz
#net CLKB loc=P8 | IOSTANDARD = LVCMOS33 ; # 50MHz
#net CLKC loc=R9 | IOSTANDARD = LVCMOS33 ; # ??Mhz
#
# Push button switches
#
#NET SW1_3_N loc=K2 | IOSTANDARD = LVCMOS33 ; # Flash Block select
#NET SW1_4_N loc=J4 | IOSTANDARD = LVCMOS33 ; # Flash Block
NET SW2_N loc=E11 | IOSTANDARD = LVCMOS33 ; # active-low pushbutton
NET SW3_N loc=A13 | IOSTANDARD = LVCMOS33 ; # active-low pushbutton
#
# PS/2 Keyboard
#
net PS2_CLK loc=B16 | IOSTANDARD = LVCMOS33 ;
net PS2_DAT loc=E13 | IOSTANDARD = LVCMOS33 ;
#
# VGA Outputs
#
NET VGA_BLUE<0> LOC=C9 | IOSTANDARD = LVCMOS33 ;
NET VGA_BLUE<1> LOC=E7 | IOSTANDARD = LVCMOS33 ;
NET VGA_BLUE<2> LOC=D5 | IOSTANDARD = LVCMOS33 ;
NET VGA_GREEN<0> LOC=A8 | IOSTANDARD = LVCMOS33 ;
NET VGA_GREEN<1> LOC=A5 | IOSTANDARD = LVCMOS33 ;
NET VGA_GREEN<2> LOC=C3 | IOSTANDARD = LVCMOS33 ;
NET VGA_RED<0> LOC=C8 | IOSTANDARD = LVCMOS33 ;
NET VGA_RED<1> LOC=D6 | IOSTANDARD = LVCMOS33 ;
NET VGA_RED<2> LOC=B1 | IOSTANDARD = LVCMOS33 ;
NET VGA_HSYNC_N LOC=B7 | IOSTANDARD = LVCMOS33 ;
NET VGA_VSYNC_N LOC=D8 | IOSTANDARD = LVCMOS33 ;
#
# Manually assign locations for the DCMs along the bottom of the FPGA
# because PAR sometimes places them in opposing corners and that ruins the clocks.
#
INST "u1/gen_dlls.dllint" LOC="DCM_X0Y0";
INST "u1/gen_dlls.dllext" LOC="DCM_X1Y0";
NET "SW2_N" LOC = "N4"; # Bank = 3, Pin name = IO_L1P, Sch name = BTNU
NET "SW3_N" LOC = "P3"; # Bank = 3, Pin name = IO_L2N, Sch name = BTND
 
# Manually assign locations for the DCMs along the bottom of the FPGA
# because PAR sometimes places them in opposing corners and that ruins the clocks.
#INST "u2_dllint" LOC="DCM_X0Y0";
#INST "u2_dllext" LOC="DCM_X1Y0";
#
# SDRAM memory pin assignments
#
net SDRAM_clkfb loc=N8 | IOSTANDARD = LVCMOS33 ; # feedback SDRAM clock after PCB delays
net SDRAM_clkout loc=E10 | IOSTANDARD = LVCMOS33 ; # clock to SDRAM
net SDRAM_CKE loc=D7 | IOSTANDARD = LVCMOS33 ; # SDRAM clock enable
net SDRAM_CS_N loc=B8 | IOSTANDARD = LVCMOS33 ; # SDRAM chip-select
net SDRAM_RAS_N loc=A9 | IOSTANDARD = LVCMOS33 ;
net SDRAM_CAS_N loc=A10 | IOSTANDARD = LVCMOS33 ;
net SDRAM_WE_N loc=B10 | IOSTANDARD = LVCMOS33 ;
net SDRAM_DQMH loc=D9 | IOSTANDARD = LVCMOS33 ;
net SDRAM_DQML loc=C10 | IOSTANDARD = LVCMOS33 ;
net SDRAM_A<0> loc=B5 | IOSTANDARD = LVCMOS33 ;
net SDRAM_A<1> loc=A4 | IOSTANDARD = LVCMOS33 ;
net SDRAM_A<2> loc=B4 | IOSTANDARD = LVCMOS33 ;
net SDRAM_A<3> loc=E6 | IOSTANDARD = LVCMOS33 ;
net SDRAM_A<4> loc=E3 | IOSTANDARD = LVCMOS33 ;
net SDRAM_A<5> loc=C1 | IOSTANDARD = LVCMOS33 ;
net SDRAM_A<6> loc=E4 | IOSTANDARD = LVCMOS33 ;
net SDRAM_A<7> loc=D3 | IOSTANDARD = LVCMOS33 ;
net SDRAM_A<8> loc=C2 | IOSTANDARD = LVCMOS33 ;
net SDRAM_A<9> loc=A3 | IOSTANDARD = LVCMOS33 ;
net SDRAM_A<10> loc=B6 | IOSTANDARD = LVCMOS33 ;
net SDRAM_A<11> loc=C5 | IOSTANDARD = LVCMOS33 ;
net SDRAM_A<12> loc=C6 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<0> loc=C15 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<1> loc=D12 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<2> loc=A14 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<3> loc=B13 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<4> loc=D11 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<5> loc=A12 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<6> loc=C11 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<7> loc=D10 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<8> loc=B11 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<9> loc=B12 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<10> loc=C12 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<11> loc=B14 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<12> loc=D14 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<13> loc=C16 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<14> loc=F12 | IOSTANDARD = LVCMOS33 ;
net SDRAM_D<15> loc=F13 | IOSTANDARD = LVCMOS33 ;
net SDRAM_BA<0> loc=A7 | IOSTANDARD = LVCMOS33 ;
net SDRAM_BA<1> loc=C7 | IOSTANDARD = LVCMOS33 ;
#
# Flash memory interface
#
#net FLASH_A<0> LOC=N5 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<1> LOC=K14 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<2> LOC=K13 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<3> LOC=K12 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<4> LOC=L14 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<5> LOC=M16 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<6> LOC=L13 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<7> LOC=N16 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<8> LOC=N14 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<9> LOC=P15 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<10> LOC=R16 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<11> LOC=P14 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<12> LOC=P13 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<13> LOC=N12 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<14> LOC=T14 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<15> LOC=R13 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<16> LOC=N10 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<17> LOC=M14 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<18> LOC=K3 | IOSTANDARD = LVCMOS33 ;
#net FLASH_A<19> LOC=K4 | IOSTANDARD = LVCMOS33 ;
#
#net FLASH_D<0> LOC=M11 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<1> LOC=N11 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<2> LOC=P10 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<3> LOC=R10 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<4> LOC=T7 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<5> LOC=R7 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<6> LOC=N6 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<7> LOC=M6 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<8> LOC=T4 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<9> LOC=R5 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<10> LOC=T5 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<11> LOC=P6 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<12> LOC=M7 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<13> LOC=R6 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<14> LOC=N7 | IOSTANDARD = LVCMOS33 ;
#net FLASH_D<15> LOC=P7 | IOSTANDARD = LVCMOS33 ;
net FLASH_CE_N LOC=R4 | IOSTANDARD = LVCMOS33 ;
#net FLASH_OE_N LOC=P5 | IOSTANDARD = LVCMOS33 ;
#net FLASH_WE_N LOC=M13 | IOSTANDARD = LVCMOS33 ;
#net FLASH_BYTE_N LOC=T8 | IOSTANDARD = LVCMOS33 ;
#net FLASH_RDY LOC=L12 | IOSTANDARD = LVCMOS33 ;
#net FLASH_RST_N LOC=P16 | IOSTANDARD = LVCMOS33 ;
#
# FPGA Programming interface
#
#net FPGA_D<0> LOC=M11 | IOSTANDARD = LVCMOS33 ; # shared with FLASH_D0, S1, LED_C
#net FPGA_D<1> LOC=N11 | IOSTANDARD = LVCMOS33 ; # shared with FLASH_D1, S7, LED_DP
#net FPGA_D<2> LOC=P10 | IOSTANDARD = LVCMOS33 ; # shared with FLASH_D2, S4, LED_B
#net FPGA_D<3> LOC=R10 | IOSTANDARD = LVCMOS33 ; # shared with FLASH_D3, S6, LED_A
#net FPGA_D<4> LOC=T7 | IOSTANDARD = LVCMOS33 ; # shared with FLASH_D4, S5, LED_F
#net FPGA_D<5> LOC=R7 | IOSTANDARD = LVCMOS33 ; # shared with FLASH_D5, S3, LED_G
#net FPGA_D<6> LOC=N6 | IOSTANDARD = LVCMOS33 ; # shared with FLASH_D6, S2, LED_E
#net FPGA_D<7> LOC=M6 | IOSTANDARD = LVCMOS33 ; # shared with FLASH_D7, S0, LED_D
#net FPGA_CCLK LOC=T15 | IOSTANDARD = LVCMOS33 ;
#net FPGA_DONE LOC=R14 | IOSTANDARD = LVCMOS33 ;
#net FPGA_INIT_N LOC=N9 | IOSTANDARD = LVCMOS33 ;
#net FPGA_PROG_N LOC=B3 | IOSTANDARD = LVCMOS33 ;
#net FPGA_TCK LOC=C14 | IOSTANDARD = LVCMOS33 ;
#net FPGA_TDI LOC=A2 | IOSTANDARD = LVCMOS33 ;
#net FPGA_TDI_CSN LOC=R3 | IOSTANDARD = LVCMOS33 ;
#net FPGA_TDO LOC=A15 | IOSTANDARD = LVCMOS33 ;
#net FPGA_TDO_WRN LOC=T3 | IOSTANDARD = LVCMOS33 ;
#net FPGA_TMS LOC=C13 | IOSTANDARD = LVCMOS33 ;
#net FPGA_TMS_BSY LOC=P9 | IOSTANDARD = LVCMOS33 ;
#
# Status LED
#
net S<0> loc=M6 | IOSTANDARD = LVCMOS33 ; # FPGA_D7, LED_D
net S<1> loc=M11 | IOSTANDARD = LVCMOS33 ; # FPGA_D0, LED_C
net S<2> loc=N6 | IOSTANDARD = LVCMOS33 ; # FPGA_D6, LED_E
net S<3> loc=R7 | IOSTANDARD = LVCMOS33 ; # FPGA_D5, LED_G
net S<4> loc=P10 | IOSTANDARD = LVCMOS33 ; # FPGA_D2, LED_B
net S<5> loc=T7 | IOSTANDARD = LVCMOS33 ; # FPGA_D4, LED_F
net S<6> loc=R10 | IOSTANDARD = LVCMOS33 ; # FPGA_D3, LED_A
net S<7> loc=N11 | IOSTANDARD = LVCMOS33 ; # FPGA_D1, LED_DP
NET "S<0>" LOC = "U18"; # Bank = 1, Pin name = IO_L52N_M1DQ15, Sch name = LD0
NET "S<1>" LOC = "M14"; # Bank = 1, Pin name = IO_L53P, Sch name = LD1
NET "S<2>" LOC = "N14"; # Bank = 1, Pin name = IO_L53N_VREF, Sch name = LD2
NET "S<3>" LOC = "L14"; # Bank = 1, Pin name = IO_L61P, Sch name = LD3
NET "S<4>" LOC = "M13"; # Bank = 1, Pin name = IO_L61N, Sch name = LD4
NET "S<5>" LOC = "D4"; # Bank = 0, Pin name = IO_L1P_HSWAPEN_0, Sch name = HSWAP/LD5
NET "S<6>" LOC = "P16"; # Bank = 1, Pin name = IO_L74N_DOUT_BUSY_1, Sch name = LD6
NET "S<7>" LOC = "N12"; # Bank = 2, Pin name = IO_L13P_M1_2, Sch name = M1/LD7
 
#
# Parallel Port
#
#net PPORT_load loc=N14 | IOSTANDARD = LVCMOS33 ;
#net PPORT_clk loc=P15 | IOSTANDARD = LVCMOS33 ;
#net PPORT_din<0> loc=R16 | IOSTANDARD = LVCMOS33 ;
#net PPORT_din<1> loc=P14 | IOSTANDARD = LVCMOS33 ;
#net PPORT_din<2> loc=P13 | IOSTANDARD = LVCMOS33 ;
#net PPORT_din<3> loc=N12 | IOSTANDARD = LVCMOS33 ;
#
#net PPORT_dout<0> loc=N5 | IOSTANDARD = LVCMOS33 ;
#net PPORT_dout<1> loc=K14 | IOSTANDARD = LVCMOS33 ;
#net PPORT_dout<2> loc=K13 | IOSTANDARD = LVCMOS33 ;
#net PPORT_dout<3> loc=T10 | IOSTANDARD = LVCMOS33 ;
#
#net PPORT_d<0> loc=N14 | IOSTANDARD = LVCMOS33 ; # FLASH_A<8> / PPORT_LOAD
#net PPORT_d<1> loc=P15 | IOSTANDARD = LVCMOS33 ; # FLASH_A<9> / PPORT_CLK
#net PPORT_d<2> loc=R16 | IOSTANDARD = LVCMOS33 ; # FLASH_A<10> / PPORT_DIN<0>
#net PPORT_d<3> loc=P14 | IOSTANDARD = LVCMOS33 ; # FLASH_A<11> / PPORT_DIN<1>
#net PPORT_d<4> loc=P13 | IOSTANDARD = LVCMOS33 ; # FLASH_A<12> / PPORT_DIN<2>
#net PPORT_d<5> loc=N12 | IOSTANDARD = LVCMOS33 ; # FLASH_A<13> / PPORT_DIN<3>
##net PPORT_d<6> loc=T14 | IOSTANDARD = LVCMOS33 ; # FLASH_A<14>
##net PPORT_d<7> loc=R13 | IOSTANDARD = LVCMOS33 ; # FLASH_A<15>
#
#net PPORT_s<3> loc=N5 | IOSTANDARD = LVCMOS33 ; # FLASH_A<0> / PPORT_DOUT<0>
#net PPORT_s<4> loc=K14 | IOSTANDARD = LVCMOS33 ; # FLASH_A<1> / PPORT_DOUT<1>
#net PPORT_s<5> loc=K13 | IOSTANDARD = LVCMOS33 ; # FLASH_A<2> / PPORT_DOUT<2>
#net PPORT_s<6> loc=T10 | IOSTANDARD = LVCMOS33 ; # / PPORT_DOUT<3>
#
########################################################
#
# XST3.0 pins
#
########################################################
#
# BAR LED
#
#net BAR<1> loc=L5 | IOSTANDARD = LVCMOS33 ; # bar led 1, PB_A0
#net BAR<2> loc=N2 | IOSTANDARD = LVCMOS33 ; # bar led 2, PB_A1
#net BAR<3> loc=M3 | IOSTANDARD = LVCMOS33 ; # bar led 3, PB_A2
#net BAR<4> loc=N1 | IOSTANDARD = LVCMOS33 ; # bar led 4, PB_A3
#net BAR<5> loc=T13 | IOSTANDARD = LVCMOS33 ; # bar led 5, PB_A4
#net BAR<6> loc=L15 | IOSTANDARD = LVCMOS33 ; # bar led 6, ETHER_IRQ
#net BAR<7> loc=J13 | IOSTANDARD = LVCMOS33 ; # bar led 7, USB_IRQ_N
#net BAR<8> loc=H15 | IOSTANDARD = LVCMOS33 ; # bar led 8, IDE_IRQ
#net BAR<9> loc=J16 | IOSTANDARD = LVCMOS33 ; # bar led 9, SLOT1_IRQ
#net BAR<10> loc=J14 | IOSTANDARD = LVCMOS33 ; # bar led 10, SLOT2_IRQ
#
# Push Buttons
#
#net PB1_N loc=H4 | IOSTANDARD = LVCMOS33 ; # Shared with PB_D15
#net PB2_N loc=L5 | IOSTANDARD = LVCMOS33 ; # Shared with BAR1, PB_A0
#net PB3_N loc=N2 | IOSTANDARD = LVCMOS33 ; # Shared with BAR2, PB_A1
#net PB4_N loc=M3 | IOSTANDARD = LVCMOS33 ; # Shared with BAR3, PB_A2
#
# RS232 PORT
#
net RS232_TXD loc=J2 | IOSTANDARD = LVCMOS33 ; # RS232 TD pin 3
net RS232_RXD loc=G5 | IOSTANDARD = LVCMOS33 ; # RS232 RD pin 2
net RS232_CTS loc=D1 | IOSTANDARD = LVCMOS33 ; # RS232 CTS
net RS232_RTS loc=F4 | IOSTANDARD = LVCMOS33 ; # RS232 RTS
NET "RS232_RXD" LOC = "A16"; # Bank = 0, Pin name = IO_L66N_SCP0, Sch name = USBB-RXD
NET "RS232_TXD" LOC = "B16"; # Bank = 0, Pin name = IO_L66P_SCP1, Sch name = USBB-TXD
 
#
# 16 Bit Peripheral Bus
#
# 5-bit Peripheral address bus
net PB_A<0> loc=L5 | IOSTANDARD = LVCMOS33 ; # Shared with BAR1, PB2
net PB_A<1> loc=N2 | IOSTANDARD = LVCMOS33 ; # Shared with BAR2, PB3
net PB_A<2> loc=M3 | IOSTANDARD = LVCMOS33 ; # Shared with BAR3, PB4
net PB_A<3> loc=N1 | IOSTANDARD = LVCMOS33 ; # Shared with BAR4
net PB_A<4> loc=T13 | IOSTANDARD = LVCMOS33 ; # Shared with BAR5
# 16-bit peripheral data bus
net PB_D<0> loc=P12 | IOSTANDARD = LVCMOS33 ; # Shared with DIPSW1
net PB_D<1> loc=J1 | IOSTANDARD = LVCMOS33 ; # Shared with DIPSW2
net PB_D<2> loc=H1 | IOSTANDARD = LVCMOS33 ; # Shared with DIPSW3
net PB_D<3> loc=H3 | IOSTANDARD = LVCMOS33 ; # Shared with DIPSW4
net PB_D<4> loc=G2 | IOSTANDARD = LVCMOS33 ; # Shared with DIPSW5
net PB_D<5> loc=K15 | IOSTANDARD = LVCMOS33 ; # Shared with DIPSW6
net PB_D<6> loc=K16 | IOSTANDARD = LVCMOS33 ; # Shared with DIPSW7
net PB_D<7> loc=F15 | IOSTANDARD = LVCMOS33 ; # Shared with DIPSW8
net PB_D<8> loc=E2 | IOSTANDARD = LVCMOS33 ; # Shared with LED2_A
net PB_D<9> loc=E1 | IOSTANDARD = LVCMOS33 ; # Shared with LED2_B
net PB_D<10> loc=F3 | IOSTANDARD = LVCMOS33 ; # Shared with LED2_C
net PB_D<11> loc=F2 | IOSTANDARD = LVCMOS33 ; # Shared with LED2_D
net PB_D<12> loc=G4 | IOSTANDARD = LVCMOS33 ; # Shared with LED2_E
net PB_D<13> loc=G3 | IOSTANDARD = LVCMOS33 ; # Shared with LED2_F
net PB_D<14> loc=G1 | IOSTANDARD = LVCMOS33 ; # Shared with LED2_G
net PB_D<15> loc=H4 | IOSTANDARD = LVCMOS33 ; # Shared with LED2_DP, PB1
net PB_RD_N loc=P2 | IOSTANDARD = LVCMOS33 ; # disk I/O read control
net PB_WR_N loc=R1 | IOSTANDARD = LVCMOS33 ; # disk I/O write control
#
# IDE Interface
#
net IDE_CS0_N loc=G15 | IOSTANDARD = LVCMOS33 ; # disk register-bank select
net IDE_CS1_N loc=G14 | IOSTANDARD = LVCMOS33 ; # disk register-bank select
net IDE_DMACK_N loc=K1 | IOSTANDARD = LVCMOS33 ; # (out) IDE DMA acknowledge
#net IDE_DMARQ loc=L4 | IOSTANDARD = LVCMOS33 ; # (in) IDE DMA request
#net IDE_IORDY loc=L2 | IOSTANDARD = LVCMOS33 ; # (in) IDE IO ready
#net IDE_IRQ loc=H15 | IOSTANDARD = LVCMOS33 ; # (in) IDE interrupt # shared with BAR8
#
# Ethernet Controller
# Disable if not used
#
net ether_cs_n loc=G13 | IOSTANDARD = LVCMOS33 ; # (out)Ethernet chip-enable
net ether_aen loc=E14 | IOSTANDARD = LVCMOS33 ; # (out) Ethernet address enable not
net ether_bhe_n loc=J3 | IOSTANDARD = LVCMOS33 ; # (out) Ethernet bus high enable
net ether_clk loc=R9 | IOSTANDARD = LVCMOS33 ; # (in) Ethernet clock
net ether_irq loc=L15 | IOSTANDARD = LVCMOS33 ; # (in) Ethernet irq - Shared with BAR6
net ether_rdy loc=M2 | IOSTANDARD = LVCMOS33 ; # (in) Ethernet ready
#
# Expansion slots
#
net slot1_cs_n loc=E15 | IOSTANDARD = LVCMOS33 ; # (out)
#net slot1_irq loc=J16 | IOSTANDARD = LVCMOS33 ; # (in) Shared with BAR9
net slot2_cs_n loc=D16 | IOSTANDARD = LVCMOS33 ; # (out)
#net slot2_irq loc=J14 | IOSTANDARD = LVCMOS33 ; # (in) Shared with BAR10
#
# Audio codec
#
#net audio_lrck loc=R12 | IOSTANDARD = LVCMOS33 ; # (out)
#net audio_mclk loc=P11 | IOSTANDARD = LVCMOS33 ; # (out)
#net audio_sclk loc=T12 | IOSTANDARD = LVCMOS33 ; # (out)
#net audio_sdti loc=M10 | IOSTANDARD = LVCMOS33 ; # (out)
#net audio_sdto loc=K5 | IOSTANDARD = LVCMOS33 ; # (in)
#
# i2c
#
#net i2c_scl loc=F5 | IOSTANDARD = LVCMOS33 ; #(out)
#net i2c_sda loc=D2 | IOSTANDARD = LVCMOS33 ; # (in/out)
#
# USB
#
#NET USB_CLK LOC=M1 | IOSTANDARD = LVCMOS33 ; # (IN)
#NET USB_IRQ_N LOC=J13 | IOSTANDARD = LVCMOS33 ; # (IN) Shared with BAR7
#NET USB_SUSPEND LOC=l3 | IOSTANDARD = LVCMOS33 ; # (IN)
#
# VIDEO DIGITIZER
#
#NET VIDIN_AVID LOC= | IOSTANDARD = LVCMOS33 ; # (IN)
#NET VIDIN_CLK LOC=H16 | IOSTANDARD = LVCMOS33 ; # (IN)
#NET VIDIN_FID LOC= | IOSTANDARD = LVCMOS33 ; # (IN)
#NET VIDIN_HSYNC LOC= | IOSTANDARD = LVCMOS33 ; # (IN)
#NET VIDIN_IRQ LOC= | IOSTANDARD = LVCMOS33 ; # (IN)
#NET VIDIN_VSYNC LOC= | IOSTANDARD = LVCMOS33 ; # (IN)
#NET VIDIN_Y<0> LOC=H14 | IOSTANDARD = LVCMOS33 ; # (IN) Shared with LED1_A
#NET VIDIN_Y<1> LOC=M4 | IOSTANDARD = LVCMOS33 ; # (IN) Shared with LED1_B
#NET VIDIN_Y<2> LOC=P1 | IOSTANDARD = LVCMOS33 ; # (IN) Shared with LED1_C
#NET VIDIN_Y<3> LOC=N3 | IOSTANDARD = LVCMOS33 ; # (IN) Shared with LED1_D
#NET VIDIN_Y<4> LOC=M15 | IOSTANDARD = LVCMOS33 ; # (IN) Shared with LED1_E
#NET VIDIN_Y<5> LOC=H13 | IOSTANDARD = LVCMOS33 ; # (IN) Shared with LED1_F
#NET VIDIN_Y<6> LOC=G16 | IOSTANDARD = LVCMOS33 ; # (IN) Shared with LED1_G
#NET VIDIN_Y<7> LOC=N15 | IOSTANDARD = LVCMOS33 ; # (IN) Shared with LED1_DP
#
# Timing Constraints
#
NET "CLKA" TNM_NET="CLKA";
/trunk/rtl/System09_Digilent_Atlys/system09.vhd
132,7 → 132,6
use ieee.numeric_std.all;
library work;
use work.common.all;
use WORK.xsasdram.all;
library unisim;
use unisim.vcomponents.all;
 
143,67 → 142,17
SW2_N : in Std_logic; -- Master Reset input (active low)
SW3_N : in Std_logic; -- Non Maskable Interrupt input (active low)
 
-- PS/2 Keyboard
ps2_clk : inout Std_logic;
ps2_dat : inout Std_Logic;
 
-- CRTC output signals
vga_vsync_n : out Std_Logic;
vga_hsync_n : out Std_Logic;
vga_blue : out std_logic_vector(2 downto 0);
vga_green : out std_logic_vector(2 downto 0);
vga_red : out std_logic_vector(2 downto 0);
 
-- RS232 Port
RS232_RXD : in Std_Logic;
RS232_TXD : out Std_Logic;
RS232_CTS : in Std_Logic;
RS232_RTS : out Std_Logic;
 
 
-- Status 7 segment LED
S : out std_logic_vector(7 downto 0);
S : out std_logic_vector(7 downto 0)
 
-- SDRAM side
SDRAM_clkfb : in std_logic; -- feedback SDRAM clock after PCB delays
SDRAM_clkout : out std_logic; -- clock to SDRAM
SDRAM_CKE : out std_logic; -- clock-enable to SDRAM
SDRAM_CS_N : out std_logic; -- chip-select to SDRAM
SDRAM_RAS_N : out std_logic; -- SDRAM row address strobe
SDRAM_CAS_N : out std_logic; -- SDRAM column address strobe
SDRAM_WE_N : out std_logic; -- SDRAM write enable
SDRAM_BA : out std_logic_vector(1 downto 0); -- SDRAM bank address
SDRAM_A : out std_logic_vector(12 downto 0); -- SDRAM row/column address
SDRAM_D : inout std_logic_vector(15 downto 0); -- data from SDRAM
SDRAM_DQMH : out std_logic; -- enable upper-byte of SDRAM databus if true
SDRAM_DQML : out std_logic; -- enable lower-byte of SDRAM databus if true
 
-- Peripheral I/O bus $E100 - $E1FF
PB_RD_N : out std_logic;
PB_WR_N : out std_logic;
PB_A : out std_logic_vector(4 downto 0);
PB_D : inout std_logic_vector(15 downto 0);
 
-- IDE Compact Flash $E100 - $E13F
ide_dmack_n : out std_logic;
ide_cs0_n : out std_logic;
ide_cs1_n : out std_logic;
 
-- Ethernet $E140 - $E17F
ether_cs_n : out std_logic;
ether_aen : out std_logic; -- Ethernet address enable not
ether_bhe_n : out std_logic; -- Ethernet bus high enable
ether_clk : in std_logic; -- Ethernet clock
ether_rdy : in std_logic; -- Ethernet ready
ether_irq : in std_logic; -- Ethernet irq - Shared with BAR6
 
-- Slot 1 $E180 - $E1BF
slot1_cs_n : out std_logic;
-- slot1_irq : in std_logic;
 
-- Slot 2 $E1C0 - $E1FF
slot2_cs_n : out std_logic;
-- slot2_irq : in std_logic;
 
-- CPU Debug Interface signals
-- cpu_reset_o : out Std_Logic;
-- cpu_clk_o : out Std_Logic;
218,9 → 167,7
-- cpu_data_in_o : out std_logic_vector(7 downto 0);
-- cpu_data_out_o : out std_logic_vector(7 downto 0);
-- Disable Flash
FLASH_CE_N : out std_logic
);
);
end system09;
 
-------------------------------------------------------------------------------
329,13 → 276,13
 
-- Peripheral Bus port
signal pb_data_out : std_logic_vector(7 downto 0);
signal pb_cs : std_logic; -- peripheral bus chip select
signal pb_wru : std_logic; -- upper byte write strobe
signal pb_wrl : std_logic; -- lower byte write strobe
signal pb_rdu : std_logic; -- upper byte read strobe
signal pb_rdl : std_logic; -- lower byte read strobe
signal pb_hold : std_logic; -- hold peripheral bus access
signal pb_release : std_logic; -- release hold of peripheral bus
signal pb_cs : std_logic; -- peripheral bus chip select
signal pb_wru : std_logic; -- upper byte write strobe
signal pb_wrl : std_logic; -- lower byte write strobe
signal pb_rdu : std_logic; -- upper byte read strobe
signal pb_rdl : std_logic; -- lower byte read strobe
signal pb_hold : std_logic; -- hold peripheral bus access
signal pb_release : std_logic; -- release hold of peripheral bus
signal pb_count : std_logic_vector(3 downto 0); -- hold counter
signal pb_hold_state : hold_state_type;
signal pb_wreg : std_logic_vector(7 downto 0); -- lower byte write register
343,9 → 290,9
 
-- Peripheral chip selects on Peripheral Bus
signal ide_cs : std_logic; -- IDE CF interface
signal ether_cs : std_logic; -- Ethernet interface
signal slot1_cs : std_logic; -- Expansion slot 1
signal slot2_cs : std_logic; -- Expansion slot 2
signal ether_cs : std_logic; -- Ethernet interface
signal slot1_cs : std_logic; -- Expansion slot 1
signal slot2_cs : std_logic; -- Expansion slot 2
 
signal rst_i : std_logic; -- internal reset signal
signal clk_i : std_logic; -- internal master clock signal
368,16 → 315,26
type ram_type is (ram_state_0,
ram_state_rd1, ram_state_rd2,
ram_state_wr1,
ram_state_3 );
ram_state_3 );
signal ram_state : ram_type;
 
signal flash_ce_n : std_logic;
signal rs232_cts : Std_Logic;
signal rs232_rts : Std_Logic;
signal ether_cs_n : std_logic;
signal ether_aen : std_logic;
signal ether_bhe_n : std_logic;
signal slot1_cs_n : std_logic;
signal slot2_cs_n : std_logic;
-- signal BaudCount : std_logic_vector(5 downto 0);
 
-- signal BaudCount : std_logic_vector(5 downto 0);
signal CountL : std_logic_vector(23 downto 0);
signal clk_count : natural range 0 to CPU_CLK_DIV;
signal Clk25 : std_logic;
signal vga_clk : std_logic;
 
signal vga_clk : std_logic;
-----------------------------------------------------------------
--
-- CPU09 CPU core
401,25 → 358,25
);
end component;
 
 
----------------------------------------
--
-- 4K Block RAM Monitor ROM
-- $F000 - $FFFF
--
----------------------------------------
 
component mon_rom
Port (
clk : in std_logic;
rst : in std_logic;
cs : in std_logic;
rw : in std_logic;
addr : in std_logic_vector (11 downto 0);
data_out : out std_logic_vector (7 downto 0);
data_in : in std_logic_vector (7 downto 0)
);
Port (
clk : in std_logic;
rst : in std_logic;
cs : in std_logic;
rw : in std_logic;
addr : in std_logic_vector (11 downto 0);
data_out : out std_logic_vector (7 downto 0);
data_in : in std_logic_vector (7 downto 0)
);
end component;
 
 
----------------------------------------
--
-- 8KBytes Block RAM for FLEX9
426,6 → 383,7
-- $C000 - $DFFF
--
----------------------------------------
 
component flex_ram
Port (
clk : in std_logic;
435,7 → 393,7
addr : in std_logic_vector (12 downto 0);
data_out : out std_logic_vector (7 downto 0);
data_in : in std_logic_vector (7 downto 0)
);
);
end component;
 
-----------------------------------------------------------------
446,24 → 404,24
 
component acia6850
port (
clk : in Std_Logic; -- System Clock
rst : in Std_Logic; -- Reset input (active high)
cs : in Std_Logic; -- miniUART Chip Select
rw : in Std_Logic; -- Read / Not Write
addr : in Std_Logic; -- Register Select
data_in : in Std_Logic_Vector(7 downto 0); -- Data Bus In
data_out : out Std_Logic_Vector(7 downto 0); -- Data Bus Out
irq : out Std_Logic; -- Interrupt
RxC : in Std_Logic; -- Receive Baud Clock
TxC : in Std_Logic; -- Transmit Baud Clock
RxD : in Std_Logic; -- Receive Data
TxD : out Std_Logic; -- Transmit Data
DCD_n : in Std_Logic; -- Data Carrier Detect
CTS_n : in Std_Logic; -- Clear To Send
RTS_n : out Std_Logic ); -- Request To send
clk : in Std_Logic; -- System Clock
rst : in Std_Logic; -- Reset input (active high)
cs : in Std_Logic; -- miniUART Chip Select
rw : in Std_Logic; -- Read / Not Write
addr : in Std_Logic; -- Register Select
data_in : in Std_Logic_Vector(7 downto 0); -- Data Bus In
data_out : out Std_Logic_Vector(7 downto 0); -- Data Bus Out
irq : out Std_Logic; -- Interrupt
RxC : in Std_Logic; -- Receive Baud Clock
TxC : in Std_Logic; -- Transmit Baud Clock
RxD : in Std_Logic; -- Receive Data
TxD : out Std_Logic; -- Transmit Data
DCD_n : in Std_Logic; -- Data Carrier Detect
CTS_n : in Std_Logic; -- Clear To Send
RTS_n : out Std_Logic -- Request To send
);
end component;
 
 
-----------------------------------------------------------------
--
-- ACIA Clock divider
472,83 → 430,20
 
component ACIA_Clock
generic (
SYS_CLK_FREQ : integer := SYS_CLK_FREQ;
ACIA_CLK_FREQ : integer := ACIA_CLK_FREQ
SYS_CLK_FREQ : integer := SYS_CLK_FREQ;
ACIA_CLK_FREQ : integer := ACIA_CLK_FREQ
);
port (
clk : in Std_Logic; -- System Clock Input
ACIA_clk : out Std_logic -- ACIA Clock output
clk : in Std_Logic; -- System Clock Input
ACIA_clk : out Std_logic -- ACIA Clock output
);
end component;
 
 
----------------------------------------
--
-- PS/2 Keyboard
--
----------------------------------------
 
component keyboard
generic(
KBD_CLK_FREQ : integer := CPU_CLK_FREQ
);
port(
clk : in std_logic;
rst : in std_logic;
cs : in std_logic;
rw : in std_logic;
addr : in std_logic;
data_in : in std_logic_vector(7 downto 0);
data_out : out std_logic_vector(7 downto 0);
irq : out std_logic;
kbd_clk : inout std_logic;
kbd_data : inout std_logic
);
end component;
 
----------------------------------------
--
-- Video Display Unit.
--
----------------------------------------
component vdu8
generic(
VDU_CLK_FREQ : integer := CPU_CLK_FREQ; -- HZ
VGA_CLK_FREQ : integer := VGA_CLK_FREQ; -- HZ
VGA_HOR_CHARS : integer := 80; -- CHARACTERS
VGA_VER_CHARS : integer := 25; -- CHARACTERS
VGA_PIX_PER_CHAR : integer := 8; -- PIXELS
VGA_LIN_PER_CHAR : integer := 16; -- LINES
VGA_HOR_BACK_PORCH : integer := 40; -- PIXELS
VGA_HOR_SYNC : integer := 96; -- PIXELS
VGA_HOR_FRONT_PORCH : integer := 24; -- PIXELS
VGA_VER_BACK_PORCH : integer := 13; -- LINES
VGA_VER_SYNC : integer := 2; -- LINES
VGA_VER_FRONT_PORCH : integer := 35 -- LINES
);
port(
-- control register interface
vdu_clk : in std_logic; -- CPU Clock - 25MHz
vdu_rst : in std_logic;
vdu_cs : in std_logic;
vdu_rw : in std_logic;
vdu_addr : in std_logic_vector(2 downto 0);
vdu_data_in : in std_logic_vector(7 downto 0);
vdu_data_out : out std_logic_vector(7 downto 0);
 
-- vga port connections
vga_clk : in std_logic; -- VGA Pixel Clock - 25 MHz
vga_red_o : out std_logic;
vga_green_o : out std_logic;
vga_blue_o : out std_logic;
vga_hsync_o : out std_logic;
vga_vsync_o : out std_logic
);
end component;
 
 
----------------------------------------
--
-- Timer module
--
----------------------------------------
555,15 → 450,15
 
component timer
port (
clk : in std_logic;
rst : in std_logic;
cs : in std_logic;
rw : in std_logic;
addr : in std_logic;
data_in : in std_logic_vector(7 downto 0);
data_out : out std_logic_vector(7 downto 0);
irq : out std_logic
);
clk : in std_logic;
rst : in std_logic;
cs : in std_logic;
rw : in std_logic;
addr : in std_logic;
data_in : in std_logic_vector(7 downto 0);
data_out : out std_logic_vector(7 downto 0);
irq : out std_logic
);
end component;
 
------------------------------------------------------------
573,7 → 468,7
------------------------------------------------------------
 
component trap
port (
port (
clk : in std_logic;
rst : in std_logic;
cs : in std_logic;
586,12 → 481,12
);
end component;
 
 
----------------------------------------
--
-- Dynamic Address Translation Registers
--
----------------------------------------
 
component dat_ram
port (
clk : in std_logic;
606,60 → 501,10
end component;
 
 
component XSASDRAMCntl
generic(
FREQ : natural := MEM_CLK_FREQ;-- operating frequency in KHz
CLK_DIV : real := SYS_CLK_DIV; -- divisor for FREQ (can only be 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 8.0 or 16.0)
PIPE_EN : boolean := PIPE_EN; -- if true, enable pipelined read operations
MAX_NOP : natural := MAX_NOP; -- number of NOPs before entering self-refresh
MULTIPLE_ACTIVE_ROWS : boolean := MULTIPLE_ACTIVE_ROWS; -- if true, allow an active row in each bank
DATA_WIDTH : natural := DATA_WIDTH; -- host & SDRAM data width
NROWS : natural := NROWS; -- number of rows in SDRAM array
NCOLS : natural := NCOLS; -- number of columns in SDRAM array
HADDR_WIDTH : natural := HADDR_WIDTH; -- host-side address width
SADDR_WIDTH : natural := SADDR_WIDTH -- SDRAM-side address width
);
port(
-- host side
clk : in std_logic; -- master clock
bufclk : out std_logic; -- buffered master clock
clk1x : out std_logic; -- host clock sync'ed to master clock (and divided if CLK_DIV>1)
clk2x : out std_logic; -- double-speed host clock
lock : out std_logic; -- true when host clock is locked to master clock
rst : in std_logic; -- reset
rd : in std_logic; -- initiate read operation
wr : in std_logic; -- initiate write operation
uds : in std_logic; -- upper data strobe
lds : in std_logic; -- lower data strobe
earlyOpBegun : out std_logic; -- read/write/self-refresh op begun (async)
opBegun : out std_logic; -- read/write/self-refresh op begun (clocked)
rdPending : out std_logic; -- read operation(s) are still in the pipeline
done : out std_logic; -- read or write operation is done
rdDone : out std_logic; -- read done and data is available
hAddr : in std_logic_vector(HADDR_WIDTH-1 downto 0); -- address from host
hDIn : in std_logic_vector(DATA_WIDTH-1 downto 0); -- data from host
hDOut : out std_logic_vector(DATA_WIDTH-1 downto 0); -- data to host
status : out std_logic_vector(3 downto 0); -- diagnostic status of the FSM
 
-- SDRAM side
sclkfb : in std_logic; -- clock from SDRAM after PCB delays
sclk : out std_logic; -- SDRAM clock sync'ed to master clock
cke : out std_logic; -- clock-enable to SDRAM
cs_n : out std_logic; -- chip-select to SDRAM
ras_n : out std_logic; -- SDRAM row address strobe
cas_n : out std_logic; -- SDRAM column address strobe
we_n : out std_logic; -- SDRAM write enable
ba : out std_logic_vector(1 downto 0); -- SDRAM bank address bits
sAddr : out std_logic_vector(SADDR_WIDTH-1 downto 0); -- SDRAM row/column address
sData : inout std_logic_vector(DATA_WIDTH-1 downto 0); -- SDRAM in/out databus
dqmh : out std_logic; -- high databits I/O mask
dqml : out std_logic -- low databits I/O mask
);
end component;
 
--
-- Clock buffer
--
 
component BUFG
Port (
i: in std_logic;
668,251 → 513,141
end component;
 
begin
 
-----------------------------------------------------------------------------
-- Instantiation of internal components
-----------------------------------------------------------------------------
 
my_cpu : cpu09 port map (
clk => cpu_clk,
rst => cpu_reset,
vma => cpu_vma,
addr => cpu_addr(15 downto 0),
rw => cpu_rw,
data_out => cpu_data_out,
data_in => cpu_data_in,
irq => cpu_irq,
firq => cpu_firq,
nmi => cpu_nmi,
halt => cpu_halt,
hold => cpu_hold
);
my_cpu : cpu09
port map (
clk => cpu_clk,
rst => cpu_reset,
vma => cpu_vma,
addr => cpu_addr(15 downto 0),
rw => cpu_rw,
data_out => cpu_data_out,
data_in => cpu_data_in,
irq => cpu_irq,
firq => cpu_firq,
nmi => cpu_nmi,
halt => cpu_halt,
hold => cpu_hold
);
 
my_rom : mon_rom port map (
clk => cpu_clk,
rst => cpu_reset,
cs => rom_cs,
rw => '1',
addr => cpu_addr(11 downto 0),
data_in => cpu_data_out,
data_out => rom_data_out
my_rom : mon_rom
port map (
clk => cpu_clk,
rst => cpu_reset,
cs => rom_cs,
rw => '1',
addr => cpu_addr(11 downto 0),
data_in => cpu_data_out,
data_out => rom_data_out
);
 
my_flex : flex_ram port map (
clk => cpu_clk,
rst => cpu_reset,
cs => flex_cs,
rw => cpu_rw,
addr => cpu_addr(12 downto 0),
data_out => flex_data_out,
data_in => cpu_data_out
my_flex : flex_ram
port map (
clk => cpu_clk,
rst => cpu_reset,
cs => flex_cs,
rw => cpu_rw,
addr => cpu_addr(12 downto 0),
data_out => flex_data_out,
data_in => cpu_data_out
);
 
my_acia : acia6850 port map (
clk => cpu_clk,
rst => cpu_reset,
cs => acia_cs,
rw => cpu_rw,
addr => cpu_addr(0),
data_in => cpu_data_out,
data_out => acia_data_out,
irq => acia_irq,
RxC => acia_clk,
TxC => acia_clk,
RxD => rxd,
TxD => txd,
DCD_n => dcd_n,
CTS_n => cts_n,
RTS_n => rts_n
my_acia : acia6850
port map (
clk => cpu_clk,
rst => cpu_reset,
cs => acia_cs,
rw => cpu_rw,
addr => cpu_addr(0),
data_in => cpu_data_out,
data_out => acia_data_out,
irq => acia_irq,
RxC => acia_clk,
TxC => acia_clk,
RxD => rxd,
TxD => txd,
DCD_n => dcd_n,
CTS_n => cts_n,
RTS_n => rts_n
);
 
my_ACIA_Clock : ACIA_Clock
generic map(
SYS_CLK_FREQ => SYS_CLK_FREQ,
ACIA_CLK_FREQ => ACIA_CLK_FREQ
)
port map(
clk => Clk_i,
acia_clk => acia_clk
);
 
my_ACIA_Clock : ACIA_Clock
generic map(
SYS_CLK_FREQ => SYS_CLK_FREQ,
ACIA_CLK_FREQ => ACIA_CLK_FREQ
)
port map(
clk => Clk_i,
acia_clk => acia_clk
);
----------------------------------------
--
-- Timer Module
--
----------------------------------------
my_timer : timer
port map (
clk => cpu_clk,
rst => cpu_reset,
cs => timer_cs,
rw => cpu_rw,
addr => cpu_addr(0),
data_in => cpu_data_out,
data_out => timer_data_out,
irq => timer_irq
);
 
----------------------------------------
--
-- PS/2 Keyboard Interface
--
----------------------------------------
my_keyboard : keyboard
generic map (
KBD_CLK_FREQ => CPU_CLK_FREQ
)
port map(
clk => cpu_clk,
rst => cpu_reset,
cs => keyboard_cs,
rw => cpu_rw,
addr => cpu_addr(0),
data_in => cpu_data_out(7 downto 0),
data_out => keyboard_data_out(7 downto 0),
irq => keyboard_irq,
kbd_clk => ps2_clk,
kbd_data => ps2_dat
);
 
----------------------------------------
--
-- Video Display Unit instantiation
--
----------------------------------------
my_vdu : vdu8
generic map(
VDU_CLK_FREQ => CPU_CLK_FREQ, -- HZ
VGA_CLK_FREQ => VGA_CLK_FREQ, -- HZ
VGA_HOR_CHARS => 80, -- CHARACTERS
VGA_VER_CHARS => 25, -- CHARACTERS
VGA_PIX_PER_CHAR => 8, -- PIXELS
VGA_LIN_PER_CHAR => 16, -- LINES
VGA_HOR_BACK_PORCH => 40, -- PIXELS
VGA_HOR_SYNC => 96, -- PIXELS
VGA_HOR_FRONT_PORCH => 24, -- PIXELS
VGA_VER_BACK_PORCH => 13, -- LINES
VGA_VER_SYNC => 2, -- LINES
VGA_VER_FRONT_PORCH => 35 -- LINES
)
port map(
 
-- Control Registers
vdu_clk => cpu_clk, -- 12.5 MHz System Clock in
vdu_rst => cpu_reset,
vdu_cs => vdu_cs,
vdu_rw => cpu_rw,
vdu_addr => cpu_addr(2 downto 0),
vdu_data_in => cpu_data_out,
vdu_data_out => vdu_data_out,
 
-- vga port connections
vga_clk => vga_clk, -- 25 MHz VDU pixel clock
vga_red_o => vga_red_o,
vga_green_o => vga_green_o,
vga_blue_o => vga_blue_o,
vga_hsync_o => vga_hsync_n,
vga_vsync_o => vga_vsync_n
);
 
----------------------------------------
--
-- Timer Module
--
----------------------------------------
my_timer : timer port map (
clk => cpu_clk,
rst => cpu_reset,
cs => timer_cs,
rw => cpu_rw,
addr => cpu_addr(0),
data_in => cpu_data_out,
data_out => timer_data_out,
irq => timer_irq
----------------------------------------
--
-- Bus Trap Interrupt logic
--
----------------------------------------
my_trap : trap
port map (
clk => cpu_clk,
rst => cpu_reset,
cs => trap_cs,
rw => cpu_rw,
vma => cpu_vma,
addr => cpu_addr,
data_in => cpu_data_out,
data_out => trap_data_out,
irq => trap_irq
);
 
----------------------------------------
--
-- Bus Trap Interrupt logic
--
----------------------------------------
my_trap : trap port map (
clk => cpu_clk,
rst => cpu_reset,
cs => trap_cs,
rw => cpu_rw,
vma => cpu_vma,
addr => cpu_addr,
data_in => cpu_data_out,
data_out => trap_data_out,
irq => trap_irq
my_dat : dat_ram
port map (
clk => cpu_clk,
rst => cpu_reset,
cs => dat_cs,
rw => cpu_rw,
addr_hi => cpu_addr(15 downto 12),
addr_lo => cpu_addr(3 downto 0),
data_in => cpu_data_out,
data_out => dat_addr(7 downto 0)
);
 
 
my_dat : dat_ram port map (
clk => cpu_clk,
rst => cpu_reset,
cs => dat_cs,
rw => cpu_rw,
addr_hi => cpu_addr(15 downto 12),
addr_lo => cpu_addr(3 downto 0),
data_in => cpu_data_out,
data_out => dat_addr(7 downto 0)
);
 
------------------------------------------------------------------------
-- Instantiate the SDRAM controller that connects to the memory tester
-- module and interfaces to the external SDRAM chip.
------------------------------------------------------------------------
u1 : xsaSDRAMCntl
generic map(
FREQ => MEM_CLK_FREQ,
CLK_DIV => SYS_CLK_DIV,
PIPE_EN => PIPE_EN,
MAX_NOP => MAX_NOP,
MULTIPLE_ACTIVE_ROWS => MULTIPLE_ACTIVE_ROWS,
DATA_WIDTH => DATA_WIDTH,
NROWS => NROWS,
NCOLS => NCOLS,
HADDR_WIDTH => HADDR_WIDTH,
SADDR_WIDTH => SADDR_WIDTH
)
cpu_clk_buffer : BUFG
port map(
-- Host Side
clk => CLKA, -- master clock from external clock source (unbuffered)
bufclk => open, -- buffered master clock output
clk1x => clk_i, -- synchronized master clock (accounts for delays to external SDRAM)
clk2x => open, -- synchronized doubled master clock
lock => lock, -- DLL lock indicator
rst => rst_i, -- reset
rd => hRd, -- host-side SDRAM read control from memory tester
wr => hWr, -- host-side SDRAM write control from memory tester
uds => hUds, -- host-side SDRAM upper data strobe
lds => hLds, -- host-side SDRAM lower data strobe
rdPending => rdPending,-- read operation to SDRAM is in progress
opBegun => opBegun, -- indicates memory read/write has begun
earlyOpBegun => earlyBegun, -- early indicator that memory operation has begun
rdDone => rdDone, -- indicates SDRAM memory read operation is done
done => ramDone, -- indicates SDRAM memory read or write operation is done
hAddr => hAddr, -- host-side address from memory tester to SDRAM
hDIn => hDIn, -- test data pattern from memory tester to SDRAM
hDOut => hDOut, -- SDRAM data output to memory tester
status => open, -- SDRAM controller state (for diagnostics)
-- SDRAM Side
sclkfb => SDRAM_clkfb, -- clock feedback with added external PCB delays
sclk => SDRAM_clkout, -- synchronized clock to external SDRAM
cke => SDRAM_cke, -- SDRAM clock enable
cs_n => SDRAM_cs_n, -- SDRAM chip-select
ras_n => SDRAM_ras_n, -- SDRAM RAS
cas_n => SDRAM_cas_n, -- SDRAM CAS
we_n => SDRAM_we_n, -- SDRAM write-enable
ba => SDRAM_ba, -- SDRAM bank address
sAddr => SDRAM_A, -- SDRAM address
sData => SDRAM_D, -- SDRAM databus
dqmh => SDRAM_dqmh, -- SDRAM DQMH
dqml => SDRAM_dqml -- SDRAM DQML
);
 
cpu_clk_buffer : BUFG port map(
i => Clk25,
o => cpu_clk
i => Clk25,
o => cpu_clk
);
 
vga_clk_buffer : BUFG port map(
i => Clk25,
o => vga_clk
);
----------------------------------------------------------------------
--
-- Process to decode memory map
--
----------------------------------------------------------------------
----------------------------------------------------------------------
--
-- Process to decode memory map
--
----------------------------------------------------------------------
 
mem_decode: process( cpu_addr, cpu_rw, cpu_vma,
mem_decode: process( cpu_addr, cpu_rw, cpu_vma,
dat_addr,
rom_data_out,
flex_data_out,
924,291 → 659,173
trap_data_out,
ram_data_out
)
begin
cpu_data_in <= (others=>'0');
dat_cs <= '0';
rom_cs <= '0';
flex_cs <= '0';
acia_cs <= '0';
keyboard_cs <= '0';
vdu_cs <= '0';
timer_cs <= '0';
trap_cs <= '0';
pb_cs <= '0';
ide_cs <= '0';
ether_cs <= '0';
slot1_cs <= '0';
slot2_cs <= '0';
ram_cs <= '0';
if cpu_addr( 15 downto 8 ) = "11111111" then
cpu_data_in <= rom_data_out;
dat_cs <= cpu_vma; -- write DAT
rom_cs <= cpu_vma; -- read ROM
--
-- Sys09Bug Monitor ROM $F000 - $FFFF
--
elsif dat_addr(3 downto 0) = "1111" then -- $XF000 - $XFFFF
cpu_data_in <= rom_data_out;
rom_cs <= cpu_vma;
begin
cpu_data_in <= (others=>'0');
dat_cs <= '0';
rom_cs <= '0';
flex_cs <= '0';
acia_cs <= '0';
keyboard_cs <= '0';
vdu_cs <= '0';
timer_cs <= '0';
trap_cs <= '0';
pb_cs <= '0';
ide_cs <= '0';
ether_cs <= '0';
slot1_cs <= '0';
slot2_cs <= '0';
ram_cs <= '0';
 
--
-- IO Devices $E000 - $E7FF
--
elsif dat_addr(3 downto 0) = "1110" then -- $XE000 - $XEFFF
case cpu_addr(11 downto 8) is
--
-- SWTPC peripherals from $E000 to $E0FF
--
when "0000" =>
case cpu_addr(7 downto 4) is
--
-- Console Port ACIA $E000 - $E00F
--
when "0000" => -- $E000
cpu_data_in <= acia_data_out;
acia_cs <= cpu_vma;
if cpu_addr( 15 downto 8 ) = "11111111" then -- $FFxx
cpu_data_in <= rom_data_out;
dat_cs <= cpu_vma; -- write DAT
rom_cs <= cpu_vma; -- read ROM
 
--
-- Reserved
-- Floppy Disk Controller port $E010 - $E01F
--
--
-- Sys09Bug Monitor ROM $F000 - $FFFF
--
elsif dat_addr(3 downto 0) = "1111" then -- $XF000 - $XFFFF
cpu_data_in <= rom_data_out;
rom_cs <= cpu_vma;
 
--
-- Keyboard port $E020 - $E02F
--
when "0010" => -- $E020
cpu_data_in <= keyboard_data_out;
keyboard_cs <= cpu_vma;
--
-- IO Devices $E000 - $E7FF
--
elsif dat_addr(3 downto 0) = "1110" then -- $XE000 - $XEFFF
case cpu_addr(11 downto 8) is
--
-- SWTPC peripherals from $E000 to $E0FF
--
when "0000" =>
case cpu_addr(7 downto 4) is
--
-- Console Port ACIA $E000 - $E00F
--
when "0000" => -- $E000
cpu_data_in <= acia_data_out;
acia_cs <= cpu_vma;
 
--
-- VDU port $E030 - $E03F
--
when "0011" => -- $E030
cpu_data_in <= vdu_data_out;
vdu_cs <= cpu_vma;
--
-- Reserved
-- Floppy Disk Controller port $E010 - $E01F
--
 
--
-- Reserved SWTPc MP-T Timer $E040 - $E04F
--
when "0100" => -- $E040
cpu_data_in <= (others=> '0');
--
-- Keyboard port $E020 - $E02F
--
when "0010" => -- $E020
cpu_data_in <= keyboard_data_out;
keyboard_cs <= cpu_vma;
 
--
-- Timer $E050 - $E05F
--
when "0101" => -- $E050
cpu_data_in <= timer_data_out;
timer_cs <= cpu_vma;
--
-- VDU port $E030 - $E03F
--
when "0011" => -- $E030
cpu_data_in <= vdu_data_out;
vdu_cs <= cpu_vma;
 
--
-- Bus Trap Logic $E060 - $E06F
--
when "0110" => -- $E060
cpu_data_in <= trap_data_out;
trap_cs <= cpu_vma;
--
-- Reserved SWTPc MP-T Timer $E040 - $E04F
--
when "0100" => -- $E040
cpu_data_in <= (others=> '0');
 
--
-- Reserved SWTPc MP-ID PIA Timer/Printer Port $E080 - $E08F
--
--
-- Timer $E050 - $E05F
--
when "0101" => -- $E050
cpu_data_in <= timer_data_out;
timer_cs <= cpu_vma;
 
--
-- Reserved SWTPc MP-ID PTM 6840 Timer Port $E090 - $E09F
--
--
-- Bus Trap Logic $E060 - $E06F
--
when "0110" => -- $E060
cpu_data_in <= trap_data_out;
trap_cs <= cpu_vma;
 
--
-- Remaining 6 slots reserved for non SWTPc Peripherals
--
when others => -- $E0A0 to $E0FF
null;
end case;
--
-- XST-3.0 Peripheral Bus goes here
-- $E100 to $E1FF
-- Four devices
-- IDE, Ethernet, Slot1, Slot2
--
when "0001" =>
cpu_data_in <= pb_data_out;
pb_cs <= cpu_vma;
case cpu_addr(7 downto 6) is
--
-- IDE Interface $E100 to $E13F
--
when "00" =>
ide_cs <= cpu_vma;
--
-- Ethernet Interface $E140 to $E17F
--
when "01" =>
ether_cs <= cpu_vma;
--
-- Slot 1 Interface $E180 to $E1BF
--
when "10" =>
slot1_cs <= cpu_vma;
--
-- Slot 2 Interface $E1C0 to $E1FF
--
when "11" =>
slot2_cs <= cpu_vma;
--
-- Nothing else
--
when others =>
null;
end case;
--
-- $E200 to $EFFF reserved for future use
--
when others =>
--
-- Reserved SWTPc MP-ID PIA Timer/Printer Port $E080 - $E08F
--
 
--
-- Reserved SWTPc MP-ID PTM 6840 Timer Port $E090 - $E09F
--
 
--
-- Remaining 6 slots reserved for non SWTPc Peripherals
--
when others => -- $E0A0 to $E0FF
null;
end case;
 
--
-- XST-3.0 Peripheral Bus goes here
-- $E100 to $E1FF
-- Four devices
-- IDE, Ethernet, Slot1, Slot2
--
when "0001" =>
cpu_data_in <= pb_data_out;
pb_cs <= cpu_vma;
case cpu_addr(7 downto 6) is
--
-- IDE Interface $E100 to $E13F
--
when "00" =>
ide_cs <= cpu_vma;
--
-- Ethernet Interface $E140 to $E17F
--
when "01" =>
ether_cs <= cpu_vma;
--
-- Slot 1 Interface $E180 to $E1BF
--
when "10" =>
slot1_cs <= cpu_vma;
--
-- Slot 2 Interface $E1C0 to $E1FF
--
when "11" =>
slot2_cs <= cpu_vma;
--
-- Nothing else
--
when others =>
null;
end case;
 
--
-- $E200 to $EFFF reserved for future use
--
when others =>
null;
end case;
--
-- Flex RAM $0C000 - $0DFFF
--
elsif dat_addr(7 downto 1) = "0000110" then -- $0C000 - $0DFFF
cpu_data_in <= flex_data_out;
flex_cs <= cpu_vma;
--
-- Everything else is RAM
--
else
cpu_data_in <= ram_data_out;
ram_cs <= cpu_vma;
end if;
end process;
end case;
 
--
-- Flex RAM $0C000 - $0DFFF
--
elsif dat_addr(7 downto 1) = "0000110" then -- $0C000 - $0DFFF
cpu_data_in <= flex_data_out;
flex_cs <= cpu_vma;
 
--
-- 16-bit Peripheral Bus
-- 6809 Big endian
-- ISA bus little endian
-- Not sure about IDE interface
--
peripheral_bus: process( clk_i, cpu_reset, cpu_rw, cpu_addr, cpu_data_out,
pb_cs, pb_wreg, pb_rreg )
begin
pb_wru <= pb_cs and (not cpu_rw) and (not cpu_addr(0));
pb_wrl <= pb_cs and (not cpu_rw) and cpu_addr(0) ;
pb_rdu <= pb_cs and cpu_rw and (not cpu_addr(0));
pb_rdl <= pb_cs and cpu_rw and cpu_addr(0) ;
pb_a <= cpu_addr(5 downto 1);
 
--
-- Register upper byte from CPU on first CPU write
-- and lower byte from the peripheral bus on first CPU read
--
if cpu_reset = '1' then
pb_wreg <= (others => '0');
pb_rreg <= (others => '0');
elsif clk_i'event and clk_i ='1' then
if pb_wru = '1' then
pb_wreg <= cpu_data_out;
end if;
if pb_rdu = '1' then
pb_rreg <= pb_d(7 downto 0);
end if;
end if;
--
-- Peripheral bus read and write strobes are
-- Syncronized with the 50 MHz clock
-- and are asserted until the peripheral bus hold is released
--
if cpu_reset = '1' then
pb_wr_n <= '1';
pb_rd_n <= '1';
elsif clk_i'event and clk_i ='1' then
if pb_hold = '1' then
pb_wr_n <= not pb_wrl;
pb_rd_n <= not pb_rdu;
--
-- Everything else is RAM
--
else
pb_wr_n <= '1';
pb_rd_n <= '1';
cpu_data_in <= ram_data_out;
ram_cs <= cpu_vma;
end if;
end if;
--
-- The peripheral bus will be an output
-- the registered even byte on data(15 downto 8)
-- and the CPU odd bytes on data(7 downto 0)
-- on odd byte writes
--
if pb_wrl = '1' then
pb_d <= pb_wreg & cpu_data_out;
else
pb_d <= (others => 'Z');
end if;
 
--
-- On even byte reads,
-- the CPU reads the low (even) byte of the peripheral bus
-- On odd byte reads,
-- the CPU reads the registered (odd byte) input from the peripheral bus
--
if pb_rdu = '1' then
pb_data_out <= pb_d(15 downto 8);
elsif pb_rdl = '1' then
pb_data_out <= pb_rreg;
else
pb_data_out <= (others => '0');
end if;
end process;
end process;
 
--
-- Hold Peripheral bus accesses for a few cycles
--
peripheral_bus_hold: process( cpu_clk, cpu_reset, pb_rdu, pb_wrl ) --, ether_rdy )
begin
if cpu_reset = '1' then
pb_release <= '0';
pb_count <= "0000";
pb_hold_state <= hold_release_state;
elsif rising_edge(cpu_clk) then
--
-- The perpheral bus hold signal should be generated on
-- 16 bit bus read which will be on even byte reads or
-- 16 bit bus write which will be on odd byte writes.
--
case pb_hold_state is
when hold_release_state =>
pb_release <= '0';
if (pb_rdu = '1') or (pb_wrl = '1') then
pb_count <= "0100";
pb_hold_state <= hold_request_state;
elsif (pb_rdl = '1') or (pb_wru = '1') then
pb_release <= '1';
pb_hold_state <= hold_release_state;
end if;
 
when hold_request_state =>
if pb_count = "0000" then
-- if ether_rdy = '1' then
pb_release <= '1';
pb_hold_state <= hold_release_state;
-- end if;
else
pb_count <= pb_count - "0001";
end if;
when others =>
null;
end case;
end if;
end process;
 
--
-- Compact Flash Control
--
compact_flash: process( ide_cs, cpu_addr )
begin
ide_cs0_n <= not( ide_cs ) or cpu_addr(4);
ide_cs1_n <= not( ide_cs and cpu_addr(4));
ide_dmack_n <= '1';
end process;
 
--
-- Interrupts and other bus control signals
--
interrupts : process( SW3_N,
--
-- Interrupts and other bus control signals
--
interrupts : process( SW3_N,
pb_cs, pb_hold, pb_release, ram_hold,
-- ether_irq,
acia_irq,
1216,7 → 833,7
trap_irq,
timer_irq
)
begin
begin
pb_hold <= pb_cs and (not pb_release);
cpu_irq <= acia_irq or keyboard_irq;
cpu_nmi <= trap_irq or not( SW3_N );
1224,204 → 841,86
cpu_halt <= '0';
cpu_hold <= pb_hold or ram_hold;
FLASH_CE_N <= '1';
end process;
end process;
 
 
--
-- Flash 7 segment LEDS
--
my_led_flasher: process( clk_i, rst_i, CountL )
begin
--
-- Flash 7 segment LEDS
--
my_led_flasher: process( clk_i, rst_i, CountL )
begin
if rst_i = '1' then
CountL <= "000000000000000000000000";
elsif rising_edge(clk_i) then
CountL <= CountL + 1;
end if;
-- S(7 downto 0) <= CountL(23 downto 16);
end process;
-- S(7 downto 0) <= CountL(23 downto 16);
end process;
 
--
-- Generate CPU & Pixel Clock from Memory Clock
--
my_prescaler : process( clk_i, clk_count )
begin
if rising_edge( clk_i ) then
 
if clk_count = 0 then
clk_count <= CPU_CLK_DIV-1;
else
clk_count <= clk_count - 1;
--
-- Generate CPU & Pixel Clock from Memory Clock
--
my_prescaler : process( clk_i, clk_count )
begin
if rising_edge( clk_i ) then
if clk_count = 0 then
clk_count <= CPU_CLK_DIV-1;
else
clk_count <= clk_count - 1;
end if;
if clk_count = 0 then
clk25 <= '0';
elsif clk_count = (CPU_CLK_DIV/2) then
clk25 <= '1';
end if;
end if;
end process;
 
if clk_count = 0 then
clk25 <= '0';
elsif clk_count = (CPU_CLK_DIV/2) then
clk25 <= '1';
end if;
--
-- Reset button and reset timer
--
my_switch_assignments : process( rst_i, SW2_N, lock )
begin
rst_i <= not SW2_N;
cpu_reset <= rst_i or (not lock);
end process;
 
end if;
end process;
--
-- RS232 signals:
--
my_acia_assignments : process( RS232_RXD, RS232_CTS, txd, rts_n )
begin
rxd <= RS232_RXD;
cts_n <= RS232_CTS;
dcd_n <= '0';
RS232_TXD <= txd;
RS232_RTS <= rts_n;
end process;
 
--
-- Reset button and reset timer
--
my_switch_assignments : process( rst_i, SW2_N, lock )
begin
rst_i <= not SW2_N;
cpu_reset <= rst_i or (not lock);
end process;
 
--
-- RS232 signals:
--
my_acia_assignments : process( RS232_RXD, RS232_CTS, txd, rts_n )
begin
rxd <= RS232_RXD;
cts_n <= RS232_CTS;
dcd_n <= '0';
RS232_TXD <= txd;
RS232_RTS <= rts_n;
end process;
 
--
-- Pin assignments for ethernet controller
--
my_ethernet_assignments : process( clk_i, cpu_reset, ether_cs )
begin
--
-- Pin assignments for ethernet controller
--
my_ethernet_assignments : process( clk_i, cpu_reset, ether_cs )
begin
ether_cs_n <= not ether_cs;
ether_aen <= not ether_cs; -- Ethernet address enable not
ether_bhe_n <= '1'; -- Ethernet bus high enable - 8 bit access only
end process;
end process;
 
--
-- I/O expansion slot assignments
--
my_slot_assignments : process( slot1_cs, slot2_cs)
begin
--
-- I/O expansion slot assignments
--
my_slot_assignments : process( slot1_cs, slot2_cs)
begin
slot1_cs_n <= not slot1_cs;
slot2_cs_n <= not slot2_cs;
end process;
end process;
 
--
-- VGA ouputs
--
my_vga_assignments : process( vga_red_o, vga_green_o, vga_blue_o )
begin
VGA_red(0) <= vga_red_o;
VGA_red(1) <= vga_red_o;
VGA_red(2) <= vga_red_o;
VGA_green(0) <= vga_green_o;
VGA_green(1) <= vga_green_o;
VGA_green(2) <= vga_green_o;
VGA_blue(0) <= vga_blue_o;
VGA_blue(1) <= vga_blue_o;
VGA_blue(2) <= vga_blue_o;
end process;
 
--
-- SDRAM read write control
--
my_sdram_rw : process( clk_i, cpu_reset,
opBegun, ramDone,
ram_state,
ram_rd_req, ram_wr_req )
begin
if( cpu_reset = '1' ) then
hRd <= '0';
hWr <= '0';
ram_hold <= '0';
ram_state <= ram_state_0;
 
elsif( falling_edge(clk_i) ) then
--
-- ram state machine
--
case ram_state is
 
when ram_state_0 =>
if ram_rd_req = '1' then
ram_hold <= '1';
hRd <= '1';
ram_state <= ram_state_rd1;
elsif ram_wr_req = '1' then
ram_hold <= '1';
hWr <= '1';
ram_state <= ram_state_wr1;
end if;
 
when ram_state_rd1 =>
if opBegun = '1' then
hRd <= '0';
ram_state <= ram_state_rd2;
end if;
 
when ram_state_rd2 =>
if ramDone = '1' then
ram_hold <= '0';
ram_state <= ram_state_3;
end if;
 
when ram_state_wr1 =>
if opBegun = '1' then
ram_hold <= '0';
hWr <= '0';
ram_state <= ram_state_3;
end if;
 
when ram_state_3 =>
if ram_release = '1' then
ram_state <= ram_state_0;
end if;
 
when others =>
hRd <= '0';
hWr <= '0';
ram_hold <= '0';
ram_state <= ram_state_0;
end case;
 
end if;
end process;
 
--
-- SDRAM Address and data bus assignments
--
my_sdram_addr_data : process( cpu_addr, dat_addr,
cpu_data_out, hDout )
begin
hAddr(23 downto 19) <= "00000";
hAddr(18 downto 11) <= dat_addr;
hAddr(10 downto 0) <= cpu_addr(11 downto 1);
hUds <= not cpu_addr(0);
hLds <= cpu_addr(0);
if cpu_addr(0) = '0' then
hDin( 7 downto 0) <= (others=>'0');
hDin(15 downto 8) <= cpu_data_out;
ram_data_out <= hDout(15 downto 8);
else
hDin( 7 downto 0) <= cpu_data_out;
hDin(15 downto 8) <= (others=>'0');
ram_data_out <= hDout( 7 downto 0);
end if;
end process;
 
--
-- Hold RAM until falling CPU clock edge
--
ram_bus_hold: process( cpu_clk, cpu_reset, ram_hold )
begin
if ram_hold = '1' then
ram_release <= '0';
elsif falling_edge(cpu_clk) then
ram_release <= '1';
end if;
end process;
 
--
-- CPU read data request on rising CPU clock edge
--
ram_read_request: process( hRd, cpu_clk, ram_cs, cpu_rw, ram_release )
begin
--
-- CPU read data request on rising CPU clock edge
--
ram_read_request: process( hRd, cpu_clk, ram_cs, cpu_rw, ram_release )
begin
if hRd = '1' then
ram_rd_req <= '0';
elsif rising_edge(cpu_clk) then
1429,13 → 928,13
ram_rd_req <= '1';
end if;
end if;
end process;
end process;
 
--
-- CPU write data to RAM valid on rising CPU clock edge
--
ram_write_request: process( hWr, cpu_clk, ram_cs, cpu_rw, ram_release )
begin
--
-- CPU write data to RAM valid on rising CPU clock edge
--
ram_write_request: process( hWr, cpu_clk, ram_cs, cpu_rw, ram_release )
begin
if hWr = '1' then
ram_wr_req <= '0';
elsif rising_edge(cpu_clk) then
1443,38 → 942,35
ram_wr_req <= '1';
end if;
end if;
end process;
end process;
 
 
 
status_leds : process( rst_i, cpu_reset, lock )
begin
status_leds : process( rst_i, cpu_reset, lock )
begin
S(0) <= rst_i;
S(1) <= cpu_reset;
S(2) <= lock;
S(3) <= countL(23);
S(7 downto 4) <= "0000";
end process;
end process;
 
--debug_proc : process( cpu_reset, cpu_clk, cpu_rw, cpu_vma,
-- debug_proc : process( cpu_reset, cpu_clk, cpu_rw, cpu_vma,
-- cpu_halt, cpu_hold,
-- cpu_firq, cpu_irq, cpu_nmi,
-- cpu_addr, cpu_data_out, cpu_data_in )
--begin
-- cpu_reset_o <= cpu_reset;
-- cpu_clk_o <= cpu_clk;
-- cpu_rw_o <= cpu_rw;
-- cpu_vma_o <= cpu_vma;
-- cpu_halt_o <= cpu_halt;
-- cpu_hold_o <= cpu_hold;
-- cpu_firq_o <= cpu_firq;
-- cpu_irq_o <= cpu_irq;
-- cpu_nmi_o <= cpu_nmi;
-- cpu_addr_o <= cpu_addr;
-- cpu_data_out_o <= cpu_data_out;
-- cpu_data_in_o <= cpu_data_in;
--end process;
-- begin
-- cpu_reset_o <= cpu_reset;
-- cpu_clk_o <= cpu_clk;
-- cpu_rw_o <= cpu_rw;
-- cpu_vma_o <= cpu_vma;
-- cpu_halt_o <= cpu_halt;
-- cpu_hold_o <= cpu_hold;
-- cpu_firq_o <= cpu_firq;
-- cpu_irq_o <= cpu_irq;
-- cpu_nmi_o <= cpu_nmi;
-- cpu_addr_o <= cpu_addr;
-- cpu_data_out_o <= cpu_data_out;
-- cpu_data_in_o <= cpu_data_in;
-- end process;
 
 
end rtl; --===================== End of architecture =======================--
 
/trunk/rtl/System09_Digilent_Atlys/system09.xise
87,10 → 87,10
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="31"/>
<association xil_pn:name="Implementation" xil_pn:seqID="2"/>
</file>
<file xil_pn:name="atlys.ucf" xil_pn:type="FILE_UCF">
<file xil_pn:name="system09.ucf" xil_pn:type="FILE_UCF">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="System09_Atlys.vhd" xil_pn:type="FILE_VHDL">
<file xil_pn:name="system09.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="72"/>
<association xil_pn:name="Implementation" xil_pn:seqID="13"/>
</file>

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.