OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /
    from Rev 171 to Rev 172
    ↔ Reverse comparison
  •

Rev 171 → Rev 172

/trunk/sim/rtl_sim/ncsim_sim/run/run_eth_sim_regr.scr
0,0 → 1,200
#!/bin/csh -f
 
set arg_num = $#; # number of arguments
 
# current iterration
set iter = 1;
# number of tests with DEFINES + test with user defined constants!
set all_iterations = 3;
 
# Process argument
set arg_waves = 0;
set arg_regression = 0;
 
if ($arg_num == 0) then
echo " Verification without any parameter !"
else
if ($arg_num == 1) then
if ($1 == "waves") then
@ arg_waves = 1;
echo " Verification with parameter : waves !"
else
if ($1 == "regression") then
@ arg_regression = 1;
echo " Verification with parameter : regression !"
else
echo " Not correct parameter ( $1 )"
echo " Correct parameters are:"
echo " - waves"
echo " - regression"
exit
endif
endif
else
if ($arg_num == 2) then
if ($1 == "waves") then
@ arg_waves = 1;
if ($2 == "regression") then
@ arg_regression = 1;
echo " Verification with parameter : waves, regression !"
else
echo " Not correct parameter ( $2 )"
echo " Correct 2. parameter is:"
echo " - regression"
exit
endif
else
if ($1 == "regression") then
@ arg_regression = 1;
if ($2 == "waves") then
@ arg_waves = 1;
echo " Verification with parameter : waves, regression !"
else
echo " Not correct parameter ( $2 )"
echo " Correct 2. parameter is:"
echo " - waves"
exit
endif
else
echo " Not correct parameter ( $1 )"
echo " Correct parameters are:"
echo " - waves"
echo " - regression"
exit
endif
endif
else
echo " Too many parameters ( $arg_num )"
echo " Maximum number of parameters is 2:"
echo " - waves"
echo " - regression"
exit
endif
endif
endif
 
echo ""
echo "<<<"
echo "<<< Ethernet MAC VERIFICATION "
echo "<<<"
 
# ITERATION LOOP
iteration:
echo ""
echo "<<<"
echo "<<< Iteration ${iter}"
echo "<<<"
 
if ($arg_regression == 1) then
if ($iter <= $all_iterations) then
if ($iter == 1) then
echo "<<< Defines:"
echo "\tEthernet with GENERIC RAM"
echo "-DEFINE REGR" > ./defines.args
endif
if ($iter == 2) then
echo "<<< Defines:"
echo "\tEthernet with XILINX DISTRIBUTED RAM"
echo "-DEFINE REGR -DEFINE ETH_FIFO_XILINX" > ./defines.args
endif
if ($iter == 3) then
echo "<<< Defines:"
echo "\tEthernet with XILINX BLOCK RAM"
echo "-DEFINE REGR -DEFINE XILINX_RAMB4" > ./defines.args
endif
endif
endif
 
# Run NC-Verilog compiler
echo ""
echo "\t@@@"
echo "\t@@@ Compiling sources"
echo "\t@@@"
 
# creating .args file for ncvlog and adding main parameters
echo "-cdslib ../bin/cds.lib" > ./ncvlog.args
echo "-hdlvar ../bin/hdl.var" >> ./ncvlog.args
echo "-logfile ../log/ncvlog.log" >> ./ncvlog.args
echo "-update" >> ./ncvlog.args
echo "-messages" >> ./ncvlog.args
echo "-INCDIR ../../../bench/verilog" >> ./ncvlog.args
echo "-INCDIR ../../../rtl/verilog" >> ./ncvlog.args
echo "-DEFINE SIM" >> ./ncvlog.args
# adding defines to .args file
if ($arg_regression == 1) then
cat ./defines.args >> ./ncvlog.args
endif
# adding RTL and Sim files to .args file
cat ../bin/rtl_file_list.lst >> ./ncvlog.args
cat ../bin/sim_file_list.lst >> ./ncvlog.args
# adding device dependent files to .args file
cat ../bin/xilinx_file_list.lst >> ./ncvlog.args
 
ncvlog -file ./ncvlog.args# > /dev/null;
echo ""
 
 
# Run the NC-Verilog elaborator (build the design hierarchy)
echo ""
echo "\t@@@"
echo "\t@@@ Building design hierarchy (elaboration)"
echo "\t@@@"
ncelab -file ../bin/ncelab_xilinx.args# > /dev/null;
echo ""
 
 
# Run the NC-Verilog simulator (simulate the design)
echo ""
echo "\t###"
echo "\t### Running tests (this takes a long time!)"
echo "\t###"
 
# creating ncsim.args file for ncsim and adding main parameters
echo "-cdslib ../bin/cds.lib" > ./ncsim.args
echo "-hdlvar ../bin/hdl.var" >> ./ncsim.args
echo "-logfile ../log/ncsim.log" >> ./ncsim.args
echo "-messages" >> ./ncsim.args
if ($arg_waves == 1) then
echo "-input ../bin/ncsim_waves.rc" >> ./ncsim.args
else
echo "-input ../bin/ncsim.rc" >> ./ncsim.args
endif
echo "worklib.ethernet:fun" >> ./ncsim.args
 
ncsim -file ./ncsim.args# > /dev/null
if ($status != 0) then
echo ""
echo "TESTS couldn't start due to Errors!"
echo ""
exit
else
if ($arg_regression == 1) then
if ($arg_waves == 1) then
mv ../out/waves.shm ../out/i${iter}_waves.shm
endif
mv ../log/eth_tb.log ../log/i${iter}_eth_tb.log
mv ../log/eth_tb_phy.log ../log/i${iter}_eth_tb_phy.log
mv ../log/eth_tb_memory.log ../log/i${iter}_eth_tb_memory.log
mv ../log/eth_tb_host.log ../log/i${iter}_eth_tb_host.log
mv ../log/eth_tb_wb_s_mon.log ../log/i${iter}_eth_tb_wb_s_mon.log
mv ../log/eth_tb_wb_m_mon.log ../log/i${iter}_eth_tb_wb_m_mon.log
endif
endif
echo ""
 
@ iter += 1;
if (($arg_regression == 1) && ($iter <= $all_iterations)) then
goto iteration
else
# rm ./defines.args
echo ""
echo "<<<"
echo "<<< End of VERIFICATION"
echo "<<<"
echo "<<<"
echo "<<< -------------------------------------------------"
echo "<<<"
endif
 
/trunk/sim/rtl_sim/ncsim_sim/run/clean
0,0 → 1,4
rm ../bin/INCA_libs/worklib/*
rm ../bin/INCA_libs/worklib/.*
rm ../log/*.log
rm -rf ../out/*.shm
/trunk/sim/rtl_sim/ncsim_sim/run/top_groups.do
0,0 → 1,292
// Signalscan Version 6.7p1
 
 
define noactivityindicator
define analog waveform lines
define add variable default overlay off
define waveform window analogheight 1
define terminal automatic
define buttons control \
1 opensimmulationfile \
2 executedofile \
3 designbrowser \
4 waveform \
5 source \
6 breakpoints \
7 definesourcessearchpath \
8 exit \
9 createbreakpoint \
10 creategroup \
11 createmarker \
12 closesimmulationfile \
13 renamesimmulationfile \
14 replacesimulationfiledata \
15 listopensimmulationfiles \
16 savedofile
define buttons waveform \
1 undo \
2 cut \
3 copy \
4 paste \
5 delete \
6 zoomin \
7 zoomout \
8 zoomoutfull \
9 expand \
10 createmarker \
11 designbrowser:1 \
12 variableradixbinary \
13 variableradixoctal \
14 variableradixdecimal \
15 variableradixhexadecimal \
16 variableradixascii
define buttons designbrowser \
1 undo \
2 cut \
3 copy \
4 paste \
5 delete \
6 cdupscope \
7 getallvariables \
8 getdeepallvariables \
9 addvariables \
10 addvarsandclosewindow \
11 closewindow \
12 scopefiltermodule \
13 scopefiltertask \
14 scopefilterfunction \
15 scopefilterblock \
16 scopefilterprimitive
define buttons event \
1 undo \
2 cut \
3 copy \
4 paste \
5 delete \
6 move \
7 closewindow \
8 duplicate \
9 defineasrisingedge \
10 defineasfallingedge \
11 defineasanyedge \
12 variableradixbinary \
13 variableradixoctal \
14 variableradixdecimal \
15 variableradixhexadecimal \
16 variableradixascii
define buttons source \
1 undo \
2 cut \
3 copy \
4 paste \
5 delete \
6 createbreakpoint \
7 creategroup \
8 createmarker \
9 createevent \
10 createregisterpage \
11 closewindow \
12 opensimmulationfile \
13 closesimmulationfile \
14 renamesimmulationfile \
15 replacesimulationfiledata \
16 listopensimmulationfiles
define buttons register \
1 undo \
2 cut \
3 copy \
4 paste \
5 delete \
6 createregisterpage \
7 closewindow \
8 continuefor \
9 continueuntil \
10 continueforever \
11 stop \
12 previous \
13 next \
14 variableradixbinary \
15 variableradixhexadecimal \
16 variableradixascii
define show related transactions
define exit prompt
define event search direction forward
define variable nofullhierarchy
define variable nofilenames
define variable nofullpathfilenames
include bookmark with filenames
include scope history without filenames
define waveform window listpane 4.96
define waveform window namepane 15.18
define multivalueindication
define pattern curpos dot
define pattern cursor1 dot
define pattern cursor2 dot
define pattern marker dot
define print designer "Miha Dolenc"
define print border
define print color blackonwhite
define print command "/usr/ucb/lpr -P%P"
define print printer lp
define print range visible
define print variable visible
define rise fall time low threshold percentage 10
define rise fall time high threshold percentage 90
define rise fall time low value 0
define rise fall time high value 3.3
define sendmail command "/usr/lib/sendmail"
define sequence time width 30.00
define snap
 
define source noprompt
define time units default
define userdefinedbussymbol
define user guide directory "/usr/local/designacc/signalscan-6.7p1/doc/html"
define waveform window grid off
define waveform window waveheight 14
define waveform window wavespace 6
define web browser command netscape
define zoom outfull on initial add off
add group \
A \
 
add group \
"WISHBONE common" \
tb_ethernet.eth_top.wb_clk_i \
tb_ethernet.eth_top.wb_rst_i \
tb_ethernet.eth_top.wb_dat_i[31:0]'h \
tb_ethernet.eth_top.wb_dat_o[31:0]'h \
tb_ethernet.eth_top.wb_err_o \
 
add group \
"WISHBONE slave signals" \
tb_ethernet.eth_top.wb_adr_i[11:2]'h \
tb_ethernet.eth_top.wb_sel_i[3:0]'h \
tb_ethernet.eth_top.wb_we_i \
tb_ethernet.eth_top.wb_cyc_i \
tb_ethernet.eth_top.wb_stb_i \
tb_ethernet.eth_top.wb_ack_o \
 
add group \
"WISHBONE master signals" \
tb_ethernet.eth_top.m_wb_adr_o[31:0]'h \
tb_ethernet.eth_top.m_wb_sel_o[3:0]'h \
tb_ethernet.eth_top.m_wb_we_o \
tb_ethernet.eth_top.m_wb_dat_i[31:0]'h \
tb_ethernet.eth_top.m_wb_dat_o[31:0]'h \
tb_ethernet.eth_top.m_wb_cyc_o \
tb_ethernet.eth_top.m_wb_stb_o \
tb_ethernet.eth_top.m_wb_ack_i \
tb_ethernet.eth_top.m_wb_err_i \
 
add group \
"MAC common" \
tb_ethernet.eth_top.mcoll_pad_i \
tb_ethernet.eth_top.mcrs_pad_i \
 
add group \
"MAC TX" \
tb_ethernet.eth_top.mtx_clk_pad_i \
tb_ethernet.eth_top.mtxd_pad_o[3:0]'h \
tb_ethernet.eth_top.mtxen_pad_o \
tb_ethernet.eth_top.mtxerr_pad_o \
 
add group \
"MAC RX" \
tb_ethernet.eth_top.mrx_clk_pad_i \
tb_ethernet.eth_top.mrxd_pad_i[3:0]'h \
tb_ethernet.eth_top.mrxdv_pad_i \
tb_ethernet.eth_top.mrxerr_pad_i \
 
add group \
"MAC MIIM interface" \
tb_ethernet.eth_top.mdc_pad_o \
tb_ethernet.eth_top.md_padoe_o \
tb_ethernet.eth_top.md_pad_o \
tb_ethernet.eth_top.md_pad_i \
tb_ethernet.eth_top.miim1.Busy \
tb_ethernet.eth_top.miim1.LinkFail \
tb_ethernet.eth_top.miim1.Nvalid \
tb_ethernet.eth_top.miim1.CtrlData[15:0]'h \
tb_ethernet.eth_top.miim1.UpdateMIIRX_DATAReg \
tb_ethernet.eth_top.miim1.Prsd[15:0]'h \
tb_ethernet.eth_top.miim1.Divider[7:0]'h \
 
add group \
"Test signals" \
tb_ethernet.test_name[799:0]'a \
tb_ethernet.eth_top.ethreg1.MIISTATUSOut[31:0]'h \
tb_ethernet.eth_top.miim1.InProgress \
tb_ethernet.eth_top.miim1.InProgress_q1 \
tb_ethernet.eth_top.miim1.InProgress_q2 \
tb_ethernet.eth_top.miim1.InProgress_q3 \
tb_ethernet.eth_top.miim1.shftrg.ShiftReg[7:0]'h \
tb_ethernet.eth_phy.status_bit6_0[6:0]'h \
tb_ethernet.eth_phy.control_bit8_0[8:0]'h \
tb_ethernet.eth_phy.control_bit9 \
tb_ethernet.eth_phy.control_bit14_10[14:10]'h \
tb_ethernet.eth_phy.control_bit15 \
tb_ethernet.eth_phy.eth_speed \
tb_ethernet.eth_phy.m_rst_n_i \
tb_ethernet.eth_phy.mcoll_o \
tb_ethernet.eth_phy.mcrs_o \
tb_ethernet.eth_phy.md_get_phy_address \
tb_ethernet.eth_phy.md_get_reg_address \
tb_ethernet.eth_phy.md_get_reg_data_in \
tb_ethernet.eth_phy.md_put_reg_data_in \
tb_ethernet.eth_phy.md_put_reg_data_out \
tb_ethernet.eth_phy.reg_data_in[15:0]'h \
tb_ethernet.eth_phy.reg_data_out[15:0]'h \
tb_ethernet.eth_phy.register_bus_in[15:0]'h \
tb_ethernet.eth_phy.register_bus_out[15:0]'h \
tb_ethernet.eth_phy.reg_address[4:0]'h \
tb_ethernet.eth_phy.md_io_output \
tb_ethernet.eth_phy.md_io_enable \
tb_ethernet.eth_phy.md_io \
tb_ethernet.Mdc_O \
tb_ethernet.Mdi_I \
tb_ethernet.Mdio_IO \
tb_ethernet.Mdo_O \
tb_ethernet.Mdo_OE \
tb_ethernet.eth_phy.md_io_enable \
tb_ethernet.eth_phy.md_io_output \
tb_ethernet.eth_phy.md_io_rd_wr \
tb_ethernet.eth_phy.md_io_reg \
tb_ethernet.eth_phy.m_rst_n_i \
tb_ethernet.eth_phy.md_transfer_cnt'd \
tb_ethernet.eth_phy.md_transfer_cnt_reset \
tb_ethernet.eth_phy.mdc_i \
tb_ethernet.eth_phy.mrx_clk_o \
tb_ethernet.eth_phy.mrxd_o[3:0]'h \
tb_ethernet.eth_phy.mrxdv_o \
tb_ethernet.eth_phy.mrxerr_o \
tb_ethernet.eth_phy.mtx_clk_o \
tb_ethernet.eth_phy.mtxd_i[3:0]'h \
tb_ethernet.eth_phy.mtxen_i \
tb_ethernet.eth_phy.mtxerr_i \
tb_ethernet.eth_phy.phy_address[4:0]'h \
tb_ethernet.eth_phy.phy_id1[15:0]'h \
tb_ethernet.eth_phy.phy_id2[15:0]'h \
tb_ethernet.eth_phy.phy_log[31:0]'h \
tb_ethernet.eth_phy.reg_address[4:0]'h \
tb_ethernet.eth_phy.register_bus_in[15:0]'h \
tb_ethernet.eth_phy.register_bus_out[15:0]'h \
tb_ethernet.eth_phy.registers_addr_data_test_operation \
tb_ethernet.eth_phy.rx_link_down_halfperiod \
( \
minmax 0 93 \
) \
tb_ethernet.eth_phy.self_clear_d0 \
tb_ethernet.eth_phy.self_clear_d1 \
tb_ethernet.eth_phy.self_clear_d2 \
tb_ethernet.eth_phy.self_clear_d3 \
tb_ethernet.eth_phy.status_bit6_0[6:0]'h \
tb_ethernet.eth_phy.status_bit7 \
tb_ethernet.eth_phy.status_bit8 \
tb_ethernet.eth_phy.status_bit15_9[15:9]'h \
 
 
deselect all
open window designbrowser 1 geometry 56 117 855 550
open window waveform 1 geometry 10 59 1592 1094
zoom at 4981823.979(0)ns 0.00025639 0.00000000

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.