OpenCores
URL https://opencores.org/ocsvn/forwardcom/forwardcom/trunk

Subversion Repositories forwardcom

Compare Revisions

  • This comparison shows the changes necessary to convert path
    /forwardcom/trunk
    from Rev 27 to Rev 28
    Reverse comparison

Rev 27 → Rev 28

/Nexys-A7-100T.xdc
0,0 → 1,221
## This file is a general .xdc for the Nexys A7-100T
## To use it in a project:
## - uncomment the lines corresponding to used pins
## - rename the used ports (in each line, after get_ports) according to the top level signal names in the project
 
# Engineer: Agner Fog
# Create Date: 2020-06-06
# Last modified: 2021-07-19
# Project Name: ForwardCom soft core A
# Target Devices: Artix 7
# Tool Versions: Vivado v. 2020.1
 
##Switches
set_property -dict {PACKAGE_PIN J15 IOSTANDARD LVCMOS33} [get_ports switch0]
set_property -dict {PACKAGE_PIN L16 IOSTANDARD LVCMOS33} [get_ports switch1]
set_property -dict {PACKAGE_PIN M13 IOSTANDARD LVCMOS33} [get_ports switch2]
set_property -dict {PACKAGE_PIN R15 IOSTANDARD LVCMOS33} [get_ports switch3]
set_property -dict {PACKAGE_PIN R17 IOSTANDARD LVCMOS33} [get_ports switch4]
set_property -dict {PACKAGE_PIN T18 IOSTANDARD LVCMOS33} [get_ports switch5]
set_property -dict {PACKAGE_PIN U18 IOSTANDARD LVCMOS33} [get_ports switch6]
set_property -dict {PACKAGE_PIN R13 IOSTANDARD LVCMOS33} [get_ports switch7]
set_property -dict {PACKAGE_PIN T8 IOSTANDARD LVCMOS18} [get_ports switch8]
#set_property -dict { PACKAGE_PIN U8 IOSTANDARD LVCMOS18 } [get_ports { switch[9] }]; #IO_25_34 Sch=sw[9]
#set_property -dict { PACKAGE_PIN R16 IOSTANDARD LVCMOS33 } [get_ports { switch[10] }]; #IO_L15P_T2_DQS_RDWR_B_14 Sch=sw[10]
#set_property -dict { PACKAGE_PIN T13 IOSTANDARD LVCMOS33 } [get_ports { switch[11] }]; #IO_L23P_T3_A03_D19_14 Sch=sw[11]
#set_property -dict { PACKAGE_PIN H6 IOSTANDARD LVCMOS33 } [get_ports { switch12 }]; #IO_L24P_T3_35 Sch=sw[12]
#set_property -dict { PACKAGE_PIN U12 IOSTANDARD LVCMOS33 } [get_ports { switch13 }]; #IO_L20P_T3_A08_D24_14 Sch=sw[13]
#set_property -dict {PACKAGE_PIN U11 IOSTANDARD LVCMOS33} [get_ports switch14]
set_property -dict {PACKAGE_PIN V10 IOSTANDARD LVCMOS33} [get_ports switch15]
 
## LEDs
set_property -dict {PACKAGE_PIN H17 IOSTANDARD LVCMOS33} [get_ports led0]
set_property -dict {PACKAGE_PIN K15 IOSTANDARD LVCMOS33} [get_ports led1]
set_property -dict {PACKAGE_PIN J13 IOSTANDARD LVCMOS33} [get_ports led2]
set_property -dict {PACKAGE_PIN N14 IOSTANDARD LVCMOS33} [get_ports led3]
set_property -dict {PACKAGE_PIN R18 IOSTANDARD LVCMOS33} [get_ports led4]
set_property -dict {PACKAGE_PIN V17 IOSTANDARD LVCMOS33} [get_ports led5]
set_property -dict {PACKAGE_PIN U17 IOSTANDARD LVCMOS33} [get_ports led6]
set_property -dict {PACKAGE_PIN U16 IOSTANDARD LVCMOS33} [get_ports led7]
#set_property -dict { PACKAGE_PIN V16 IOSTANDARD LVCMOS33 } [get_ports { LED[8] }]; #IO_L16N_T2_A15_D31_14 Sch=led[8]
#set_property -dict { PACKAGE_PIN T15 IOSTANDARD LVCMOS33 } [get_ports { LED[9] }]; #IO_L14N_T2_SRCC_14 Sch=led[9]
#set_property -dict { PACKAGE_PIN U14 IOSTANDARD LVCMOS33 } [get_ports { LED[10] }]; #IO_L22P_T3_A05_D21_14 Sch=led[10]
#set_property -dict { PACKAGE_PIN T16 IOSTANDARD LVCMOS33 } [get_ports { LED[11] }]; #IO_L15N_T2_DQS_DOUT_CSO_B_14 Sch=led[11]
set_property -dict {PACKAGE_PIN V15 IOSTANDARD LVCMOS33} [get_ports led12]
set_property -dict {PACKAGE_PIN V14 IOSTANDARD LVCMOS33} [get_ports led13]
set_property -dict {PACKAGE_PIN V12 IOSTANDARD LVCMOS33} [get_ports led14]
set_property -dict {PACKAGE_PIN V11 IOSTANDARD LVCMOS33} [get_ports led15]
 
## RGB LEDs
set_property -dict {PACKAGE_PIN R12 IOSTANDARD LVCMOS33} [get_ports led16B]; #IO_L5P_T0_D06_14 Sch=led16_b
set_property -dict {PACKAGE_PIN M16 IOSTANDARD LVCMOS33} [get_ports led16G]; #IO_L10P_T1_D14_14 Sch=led16_g
set_property -dict {PACKAGE_PIN N15 IOSTANDARD LVCMOS33} [get_ports led16R]; #IO_L11P_T1_SRCC_14 Sch=led16_r
#set_property -dict { PACKAGE_PIN G14 IOSTANDARD LVCMOS33 } [get_ports { LED17_B }]; #IO_L15N_T2_DQS_ADV_B_15 Sch=led17_b
#set_property -dict { PACKAGE_PIN R11 IOSTANDARD LVCMOS33 } [get_ports { LED17_G }]; #IO_0_14 Sch=led17_g
#set_property -dict { PACKAGE_PIN N16 IOSTANDARD LVCMOS33 } [get_ports { LED17_R }]; #IO_L11N_T1_SRCC_14 Sch=led17_r
 
##7 segment display
set_property -dict {PACKAGE_PIN T10 IOSTANDARD LVCMOS33} [get_ports {segment7seg[0]}]
set_property -dict {PACKAGE_PIN R10 IOSTANDARD LVCMOS33} [get_ports {segment7seg[1]}]
set_property -dict {PACKAGE_PIN K16 IOSTANDARD LVCMOS33} [get_ports {segment7seg[2]}]
set_property -dict {PACKAGE_PIN K13 IOSTANDARD LVCMOS33} [get_ports {segment7seg[3]}]
set_property -dict {PACKAGE_PIN P15 IOSTANDARD LVCMOS33} [get_ports {segment7seg[4]}]
set_property -dict {PACKAGE_PIN T11 IOSTANDARD LVCMOS33} [get_ports {segment7seg[5]}]
set_property -dict {PACKAGE_PIN L18 IOSTANDARD LVCMOS33} [get_ports {segment7seg[6]}]
set_property -dict {PACKAGE_PIN H15 IOSTANDARD LVCMOS33} [get_ports {segment7seg[7]}]
set_property -dict {PACKAGE_PIN J17 IOSTANDARD LVCMOS33} [get_ports {digit7seg[0]}]
set_property -dict {PACKAGE_PIN J18 IOSTANDARD LVCMOS33} [get_ports {digit7seg[1]}]
set_property -dict {PACKAGE_PIN T9 IOSTANDARD LVCMOS33} [get_ports {digit7seg[2]}]
set_property -dict {PACKAGE_PIN J14 IOSTANDARD LVCMOS33} [get_ports {digit7seg[3]}]
set_property -dict {PACKAGE_PIN P14 IOSTANDARD LVCMOS33} [get_ports {digit7seg[4]}]
set_property -dict {PACKAGE_PIN T14 IOSTANDARD LVCMOS33} [get_ports {digit7seg[5]}]
set_property -dict {PACKAGE_PIN K2 IOSTANDARD LVCMOS33} [get_ports {digit7seg[6]}]
set_property -dict {PACKAGE_PIN U13 IOSTANDARD LVCMOS33} [get_ports {digit7seg[7]}]
 
##Buttons
set_property -dict {PACKAGE_PIN C12 IOSTANDARD LVCMOS33} [get_ports load_button]; # CPU_RESETN INVERTED! #IO_L3P_T0_DQS_AD1P_15 Sch=cpu_resetn
#set_property -dict { PACKAGE_PIN N17 IOSTANDARD LVCMOS33 } [get_ports { }]; # center #IO_L9P_T1_DQS_14 Sch=btnc
set_property -dict {PACKAGE_PIN M18 IOSTANDARD LVCMOS33} [get_ports run_button]; # up #IO_L4N_T0_D05_14 Sch=btnu
#set_property -dict {PACKAGE_PIN P17 IOSTANDARD LVCMOS33} [get_ports ]; # left
set_property -dict {PACKAGE_PIN M17 IOSTANDARD LVCMOS33} [get_ports step_button]; # right
set_property -dict {PACKAGE_PIN P18 IOSTANDARD LVCMOS33} [get_ports reset_button]; # down #IO_L9N_T1_DQS_D13_14 Sch=btnd
 
 
##Pmod Headers
 
##Pmod Header JA
# Debug LCD displays connected to port JA
set_property -dict { PACKAGE_PIN C17 IOSTANDARD LVCMOS33 } [get_ports lcd_data[0]]; #JA[1] IO_L20N_T3_A19_15 Sch=ja[1]
set_property -dict { PACKAGE_PIN D18 IOSTANDARD LVCMOS33 } [get_ports lcd_data[1]]; #JA[2] IO_L21N_T3_DQS_A18_15 Sch=ja[2]
set_property -dict { PACKAGE_PIN E18 IOSTANDARD LVCMOS33 } [get_ports lcd_data[2]]; #JA[3] IO_L21P_T3_DQS_15 Sch=ja[3]
set_property -dict { PACKAGE_PIN G17 IOSTANDARD LVCMOS33 } [get_ports lcd_data[3]]; #JA[4] IO_L18N_T2_A23_15 Sch=ja[4]
set_property -dict { PACKAGE_PIN D17 IOSTANDARD LVCMOS33 } [get_ports lcd_rs]; #JA[7] IO_L16N_T2_A27_15 Sch=ja[7]
set_property -dict { PACKAGE_PIN E17 IOSTANDARD LVCMOS33 } [get_ports lcd_e[0]]; #JA[8] IO_L16P_T2_A28_15 Sch=ja[8]
set_property -dict { PACKAGE_PIN F18 IOSTANDARD LVCMOS33 } [get_ports lcd_e[1]]; #JA[9] IO_L22N_T3_A16_15 Sch=ja[9]
#set_property -dict { PACKAGE_PIN G18 IOSTANDARD LVCMOS33 } [get_ports lcd_e[2]]; #JA[10]IO_L22P_T3_A17_15 Sch=ja[10]
 
##Pmod Header JB
# Debug buttons connected to port JB
set_property -dict { PACKAGE_PIN D14 IOSTANDARD LVCMOS33 } [get_ports step_button_x]; # JB1 IO_L1P_T0_AD0P_15 Sch=jb[1]
set_property -dict { PACKAGE_PIN F16 IOSTANDARD LVCMOS33 } [get_ports run_button_x]; # JB2 IO_L14N_T2_SRCC_15 Sch=jb[2]
set_property -dict { PACKAGE_PIN G16 IOSTANDARD LVCMOS33 } [get_ports reset_button_x]; # JB3 IO_L13N_T2_MRCC_15 Sch=jb[3]
set_property -dict { PACKAGE_PIN H14 IOSTANDARD LVCMOS33 } [get_ports load_button_x]; # JB4 IO_L15P_T2_DQS_15 Sch=jb[4]
#set_property -dict { PACKAGE_PIN E16 IOSTANDARD LVCMOS33 } [get_ports { }]; # JB7 IO_L11N_T1_SRCC_15 Sch=jb[7]
#set_property -dict { PACKAGE_PIN F13 IOSTANDARD LVCMOS33 } [get_ports { }]; # JB8 IO_L5P_T0_AD9P_15 Sch=jb[8]
set_property -dict { PACKAGE_PIN G13 IOSTANDARD LVCMOS33 } [get_ports debug1_switch]; # JB9 IO_0_15 Sch=jb[9]
set_property -dict { PACKAGE_PIN H16 IOSTANDARD LVCMOS33 } [get_ports external_connected_x]; # JB10 IO_L13P_T2_MRCC_15 Sch=jb[10]
 
##Pmod Header JC
# Uncomment these lines if debug buttons are connected to port JC
#set_property -dict {PACKAGE_PIN K1 IOSTANDARD LVCMOS33} [get_ports step_button_x ]; # 1
#set_property -dict {PACKAGE_PIN F6 IOSTANDARD LVCMOS33} [get_ports run_button_x ]; # 2
#set_property -dict {PACKAGE_PIN J2 IOSTANDARD LVCMOS33} [get_ports reset_button_x]; # 3 IO_L22N_T3_35 Sch=jc[3]
#set_property -dict {PACKAGE_PIN G6 IOSTANDARD LVCMOS33} [get_ports load_button_x ]; # 4 IO_L19P_T3_35 Sch=jc[4]
#set_property -dict {PACKAGE_PIN E7 IOSTANDARD LVCMOS33} [get_ports { }]; # 7 IO_L6P_T0_35 Sch=jc[7]
#set_property -dict {PACKAGE_PIN J3 IOSTANDARD LVCMOS33} [get_ports { }]; # 8 IO_L22P_T3_35 Sch=jc[8]
#set_property -dict {PACKAGE_PIN J4 IOSTANDARD LVCMOS33} [get_ports debug1_switch]; # 9
#set_property -dict {PACKAGE_PIN E6 IOSTANDARD LVCMOS33} [get_ports external_connected_x] ; # 10
#set_property PULLTYPE PULLDOWN [get_ports external_connected_x] ; # Pull down resistor makes sure this input is low when external board not connected
 
##Pmod Header JD
# Uncomment these lines if debug LCD displays are connected to port JD
#set_property -dict {PACKAGE_PIN H4 IOSTANDARD LVCMOS33} [get_ports {lcd_data[0]}]
#set_property -dict {PACKAGE_PIN H1 IOSTANDARD LVCMOS33} [get_ports {lcd_data[1]}]
#set_property -dict {PACKAGE_PIN G1 IOSTANDARD LVCMOS33} [get_ports {lcd_data[2]}]
#set_property -dict {PACKAGE_PIN G3 IOSTANDARD LVCMOS33} [get_ports {lcd_data[3]}]
#set_property -dict {PACKAGE_PIN H2 IOSTANDARD LVCMOS33} [get_ports lcd_rs]
#set_property -dict {PACKAGE_PIN G4 IOSTANDARD LVCMOS33} [get_ports {lcd_e[0]}]
#set_property -dict {PACKAGE_PIN G2 IOSTANDARD LVCMOS33} [get_ports {lcd_e[1]}]
#set_property -dict { PACKAGE_PIN F3 IOSTANDARD LVCMOS33} [get_ports lcd_e[2] ]; # 7 IO_L13N_T2_MRCC_35 Sch=jd[10]
 
##Pmod Header JXADC
#set_property -dict { PACKAGE_PIN A14 IOSTANDARD LVCMOS33 } [get_ports { XA_N[1] }]; #IO_L9N_T1_DQS_AD3N_15 Sch=xa_n[1]
#set_property -dict { PACKAGE_PIN A13 IOSTANDARD LVCMOS33 } [get_ports { XA_P[1] }]; #IO_L9P_T1_DQS_AD3P_15 Sch=xa_p[1]
#set_property -dict { PACKAGE_PIN A16 IOSTANDARD LVCMOS33 } [get_ports { XA_N[2] }]; #IO_L8N_T1_AD10N_15 Sch=xa_n[2]
#set_property -dict { PACKAGE_PIN A15 IOSTANDARD LVCMOS33 } [get_ports { XA_P[2] }]; #IO_L8P_T1_AD10P_15 Sch=xa_p[2]
#set_property -dict { PACKAGE_PIN B17 IOSTANDARD LVCMOS33 } [get_ports { XA_N[3] }]; #IO_L7N_T1_AD2N_15 Sch=xa_n[3]
#set_property -dict { PACKAGE_PIN B16 IOSTANDARD LVCMOS33 } [get_ports { XA_P[3] }]; #IO_L7P_T1_AD2P_15 Sch=xa_p[3]
#set_property -dict { PACKAGE_PIN A18 IOSTANDARD LVCMOS33 } [get_ports { XA_N[4] }]; #IO_L10N_T1_AD11N_15 Sch=xa_n[4]
#set_property -dict { PACKAGE_PIN B18 IOSTANDARD LVCMOS33 } [get_ports { XA_P[4] }]; #IO_L10P_T1_AD11P_15 Sch=xa_p[4]
 
##VGA Connector
#set_property -dict { PACKAGE_PIN A3 IOSTANDARD LVCMOS33 } [get_ports { VGA_R[0] }]; #IO_L8N_T1_AD14N_35 Sch=vga_r[0]
#set_property -dict { PACKAGE_PIN B4 IOSTANDARD LVCMOS33 } [get_ports { VGA_R[1] }]; #IO_L7N_T1_AD6N_35 Sch=vga_r[1]
#set_property -dict { PACKAGE_PIN C5 IOSTANDARD LVCMOS33 } [get_ports { VGA_R[2] }]; #IO_L1N_T0_AD4N_35 Sch=vga_r[2]
#set_property -dict { PACKAGE_PIN A4 IOSTANDARD LVCMOS33 } [get_ports { VGA_R[3] }]; #IO_L8P_T1_AD14P_35 Sch=vga_r[3]
#set_property -dict { PACKAGE_PIN C6 IOSTANDARD LVCMOS33 } [get_ports { VGA_G[0] }]; #IO_L1P_T0_AD4P_35 Sch=vga_g[0]
#set_property -dict { PACKAGE_PIN A5 IOSTANDARD LVCMOS33 } [get_ports { VGA_G[1] }]; #IO_L3N_T0_DQS_AD5N_35 Sch=vga_g[1]
#set_property -dict { PACKAGE_PIN B6 IOSTANDARD LVCMOS33 } [get_ports { VGA_G[2] }]; #IO_L2N_T0_AD12N_35 Sch=vga_g[2]
#set_property -dict { PACKAGE_PIN A6 IOSTANDARD LVCMOS33 } [get_ports { VGA_G[3] }]; #IO_L3P_T0_DQS_AD5P_35 Sch=vga_g[3]
#set_property -dict { PACKAGE_PIN B7 IOSTANDARD LVCMOS33 } [get_ports { VGA_B[0] }]; #IO_L2P_T0_AD12P_35 Sch=vga_b[0]
#set_property -dict { PACKAGE_PIN C7 IOSTANDARD LVCMOS33 } [get_ports { VGA_B[1] }]; #IO_L4N_T0_35 Sch=vga_b[1]
#set_property -dict { PACKAGE_PIN D7 IOSTANDARD LVCMOS33 } [get_ports { VGA_B[2] }]; #IO_L6N_T0_VREF_35 Sch=vga_b[2]
#set_property -dict { PACKAGE_PIN D8 IOSTANDARD LVCMOS33 } [get_ports { VGA_B[3] }]; #IO_L4P_T0_35 Sch=vga_b[3]
#set_property -dict { PACKAGE_PIN B11 IOSTANDARD LVCMOS33 } [get_ports { VGA_HS }]; #IO_L4P_T0_15 Sch=vga_hs
#set_property -dict { PACKAGE_PIN B12 IOSTANDARD LVCMOS33 } [get_ports { VGA_VS }]; #IO_L3N_T0_DQS_AD1N_15 Sch=vga_vs
 
##Micro SD Connector
#set_property -dict { PACKAGE_PIN E2 IOSTANDARD LVCMOS33 } [get_ports { SD_RESET }]; #IO_L14P_T2_SRCC_35 Sch=sd_reset
#set_property -dict { PACKAGE_PIN A1 IOSTANDARD LVCMOS33 } [get_ports { SD_CD }]; #IO_L9N_T1_DQS_AD7N_35 Sch=sd_cd
#set_property -dict { PACKAGE_PIN B1 IOSTANDARD LVCMOS33 } [get_ports { SD_SCK }]; #IO_L9P_T1_DQS_AD7P_35 Sch=sd_sck
#set_property -dict { PACKAGE_PIN C1 IOSTANDARD LVCMOS33 } [get_ports { SD_CMD }]; #IO_L16N_T2_35 Sch=sd_cmd
#set_property -dict { PACKAGE_PIN C2 IOSTANDARD LVCMOS33 } [get_ports { SD_DAT[0] }]; #IO_L16P_T2_35 Sch=sd_dat[0]
#set_property -dict { PACKAGE_PIN E1 IOSTANDARD LVCMOS33 } [get_ports { SD_DAT[1] }]; #IO_L18N_T2_35 Sch=sd_dat[1]
#set_property -dict { PACKAGE_PIN F1 IOSTANDARD LVCMOS33 } [get_ports { SD_DAT[2] }]; #IO_L18P_T2_35 Sch=sd_dat[2]
#set_property -dict { PACKAGE_PIN D2 IOSTANDARD LVCMOS33 } [get_ports { SD_DAT[3] }]; #IO_L14N_T2_SRCC_35 Sch=sd_dat[3]
 
##Accelerometer
#set_property -dict { PACKAGE_PIN E15 IOSTANDARD LVCMOS33 } [get_ports { ACL_MISO }]; #IO_L11P_T1_SRCC_15 Sch=acl_miso
#set_property -dict { PACKAGE_PIN F14 IOSTANDARD LVCMOS33 } [get_ports { ACL_MOSI }]; #IO_L5N_T0_AD9N_15 Sch=acl_mosi
#set_property -dict { PACKAGE_PIN F15 IOSTANDARD LVCMOS33 } [get_ports { ACL_SCLK }]; #IO_L14P_T2_SRCC_15 Sch=acl_sclk
#set_property -dict { PACKAGE_PIN D15 IOSTANDARD LVCMOS33 } [get_ports { ACL_CSN }]; #IO_L12P_T1_MRCC_15 Sch=acl_csn
#set_property -dict { PACKAGE_PIN B13 IOSTANDARD LVCMOS33 } [get_ports { ACL_INT[1] }]; #IO_L2P_T0_AD8P_15 Sch=acl_int[1]
#set_property -dict { PACKAGE_PIN C16 IOSTANDARD LVCMOS33 } [get_ports { ACL_INT[2] }]; #IO_L20P_T3_A20_15 Sch=acl_int[2]
 
##Temperature Sensor
#set_property -dict { PACKAGE_PIN C14 IOSTANDARD LVCMOS33 } [get_ports { TMP_SCL }]; #IO_L1N_T0_AD0N_15 Sch=tmp_scl
#set_property -dict { PACKAGE_PIN C15 IOSTANDARD LVCMOS33 } [get_ports { TMP_SDA }]; #IO_L12N_T1_MRCC_15 Sch=tmp_sda
#set_property -dict { PACKAGE_PIN D13 IOSTANDARD LVCMOS33 } [get_ports { TMP_INT }]; #IO_L6N_T0_VREF_15 Sch=tmp_int
#set_property -dict { PACKAGE_PIN B14 IOSTANDARD LVCMOS33 } [get_ports { TMP_CT }]; #IO_L2N_T0_AD8N_15 Sch=tmp_ct
 
##Omnidirectional Microphone
#set_property -dict { PACKAGE_PIN J5 IOSTANDARD LVCMOS33 } [get_ports { M_CLK }]; #IO_25_35 Sch=m_clk
#set_property -dict { PACKAGE_PIN H5 IOSTANDARD LVCMOS33 } [get_ports { M_DATA }]; #IO_L24N_T3_35 Sch=m_data
#set_property -dict { PACKAGE_PIN F5 IOSTANDARD LVCMOS33 } [get_ports { M_LRSEL }]; #IO_0_35 Sch=m_lrsel
 
##PWM Audio Amplifier
#set_property -dict { PACKAGE_PIN A11 IOSTANDARD LVCMOS33 } [get_ports { AUD_PWM }]; #IO_L4N_T0_15 Sch=aud_pwm
#set_property -dict { PACKAGE_PIN D12 IOSTANDARD LVCMOS33 } [get_ports { AUD_SD }]; #IO_L6P_T0_15 Sch=aud_sd
 
##USB-RS232 Interface
set_property -dict {PACKAGE_PIN C4 IOSTANDARD LVCMOS33} [get_ports uart_txd_in]
set_property -dict {PACKAGE_PIN D4 IOSTANDARD LVCMOS33} [get_ports uart_rxd_out]
set_property -dict {PACKAGE_PIN D3 IOSTANDARD LVCMOS33} [get_ports uart_cts_out]
set_property -dict {PACKAGE_PIN E5 IOSTANDARD LVCMOS33} [get_ports uart_rts_in]
 
##USB HID (PS/2)
#set_property -dict { PACKAGE_PIN F4 IOSTANDARD LVCMOS33 } [get_ports { PS2_CLK }]; #IO_L13P_T2_MRCC_35 Sch=ps2_clk
#set_property -dict { PACKAGE_PIN B2 IOSTANDARD LVCMOS33 } [get_ports { PS2_DATA }]; #IO_L10N_T1_AD15N_35 Sch=ps2_data
 
##SMSC Ethernet PHY
#set_property -dict { PACKAGE_PIN C9 IOSTANDARD LVCMOS33 } [get_ports { ETH_MDC }]; #IO_L11P_T1_SRCC_16 Sch=eth_mdc
#set_property -dict { PACKAGE_PIN A9 IOSTANDARD LVCMOS33 } [get_ports { ETH_MDIO }]; #IO_L14N_T2_SRCC_16 Sch=eth_mdio
#set_property -dict { PACKAGE_PIN B3 IOSTANDARD LVCMOS33 } [get_ports { ETH_RSTN }]; #IO_L10P_T1_AD15P_35 Sch=eth_rstn
#set_property -dict { PACKAGE_PIN D9 IOSTANDARD LVCMOS33 } [get_ports { ETH_CRSDV }]; #IO_L6N_T0_VREF_16 Sch=eth_crsdv
#set_property -dict { PACKAGE_PIN C10 IOSTANDARD LVCMOS33 } [get_ports { ETH_RXERR }]; #IO_L13N_T2_MRCC_16 Sch=eth_rxerr
#set_property -dict { PACKAGE_PIN C11 IOSTANDARD LVCMOS33 } [get_ports { ETH_RXD[0] }]; #IO_L13P_T2_MRCC_16 Sch=eth_rxd[0]
#set_property -dict { PACKAGE_PIN D10 IOSTANDARD LVCMOS33 } [get_ports { ETH_RXD[1] }]; #IO_L19N_T3_VREF_16 Sch=eth_rxd[1]
#set_property -dict { PACKAGE_PIN B9 IOSTANDARD LVCMOS33 } [get_ports { ETH_TXEN }]; #IO_L11N_T1_SRCC_16 Sch=eth_txen
#set_property -dict { PACKAGE_PIN A10 IOSTANDARD LVCMOS33 } [get_ports { ETH_TXD[0] }]; #IO_L14P_T2_SRCC_16 Sch=eth_txd[0]
#set_property -dict { PACKAGE_PIN A8 IOSTANDARD LVCMOS33 } [get_ports { ETH_TXD[1] }]; #IO_L12N_T1_MRCC_16 Sch=eth_txd[1]
#set_property -dict { PACKAGE_PIN D5 IOSTANDARD LVCMOS33 } [get_ports { ETH_REFCLK }]; #IO_L11P_T1_SRCC_35 Sch=eth_refclk
#set_property -dict { PACKAGE_PIN B8 IOSTANDARD LVCMOS33 } [get_ports { ETH_INTN }]; #IO_L12P_T1_MRCC_16 Sch=eth_intn
 
##Quad SPI Flash
#set_property -dict { PACKAGE_PIN K17 IOSTANDARD LVCMOS33 } [get_ports { QSPI_DQ[0] }]; #IO_L1P_T0_D00_MOSI_14 Sch=qspi_dq[0]
#set_property -dict { PACKAGE_PIN K18 IOSTANDARD LVCMOS33 } [get_ports { QSPI_DQ[1] }]; #IO_L1N_T0_D01_DIN_14 Sch=qspi_dq[1]
#set_property -dict { PACKAGE_PIN L14 IOSTANDARD LVCMOS33 } [get_ports { QSPI_DQ[2] }]; #IO_L2P_T0_D02_14 Sch=qspi_dq[2]
#set_property -dict { PACKAGE_PIN M14 IOSTANDARD LVCMOS33 } [get_ports { QSPI_DQ[3] }]; #IO_L2N_T0_D03_14 Sch=qspi_dq[3]
#set_property -dict { PACKAGE_PIN L13 IOSTANDARD LVCMOS33 } [get_ports { QSPI_CSN }]; #IO_L6P_T0_FCS_B_14 Sch=qspi_csn
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2022 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.