OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

Compare Revisions

  • This comparison shows the changes necessary to convert path
    /minsoc
    from Rev 109 to Rev 110
    Reverse comparison

Rev 109 → Rev 110

/branches/rc-1.0/utils/setup/minsoc-configure.sh
0,0 → 1,75
#!/bin/bash
# Author: Constantinos Xanthopoulos & Raul Fajardo
# This script install MinSOC tree
# under a specific directory.
 
# ===== CONFIGURATIONS =====
# ==========================
 
DIR_TO_INSTALL=`pwd`
 
# Debug ?
export DEBUG=0;
. beautify.sh
 
function testtool
{
# is_missing=`which $1 2>&1 | grep no`
is_missing=`whereis -b $1 2>&1 | grep :$`
if [ -z "$is_missing" ]
then
cecho "$1 is installed, pass"
else
errormsg "$1 is not installed, install it and re-run this installation script."
fi
}
 
 
#Setting environment
ENV=`uname -o`
if [ "$ENV" != "GNU/Linux" ] && [ "$ENV" != "Cygwin" ]
then
errormsg "Environment $ENV not supported by this script."
fi
cecho "Building tools for ${ENV} system"
 
is_arch64=`uname -m | grep 64`
if [ -z $is_arch64 ]
then
KERNEL_ARCH="32"
else
KERNEL_ARCH="64"
fi
 
 
# User check!
if [ `whoami` = "root" ];
then
errormsg "You shouldn't be root for this script to run.";
fi;
 
 
# Testing necessary tools
cecho "Testing if necessary tools are installed, program "whereis" is required."
testtool sed
testtool patch
 
# Wizard
if [ -z "${ALTDIR}" ]
then
cnecho "Give full path (ex. /home/foo/) of the directory where minsoc is under or leave empty for "${DIR_TO_INSTALL}": ";
read ALTDIR;
if [ ! -z "${ALTDIR}" ]
then
DIR_TO_INSTALL=${ALTDIR}
fi
cecho "${DIR_TO_INSTALL} selected";
fi
 
if [ ! -d ${DIR_TO_INSTALL} ]
then
errormsg "Directory doesn't exist. Please create it";
fi;
 
export ${DIR_TO_INSTALL}
bash configure.sh
branches/rc-1.0/utils/setup/minsoc-configure.sh Property changes : Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Index: branches/rc-1.0/utils/setup/minsoc-install.sh =================================================================== --- branches/rc-1.0/utils/setup/minsoc-install.sh (revision 109) +++ branches/rc-1.0/utils/setup/minsoc-install.sh (revision 110) @@ -1,31 +1,12 @@ #!/bin/bash -# Author: Constantinos Xanthopoulos +# Author: Constantinos Xanthopoulos & Raul Fajardo # This script install MinSOC tree # under a specific directory. # ===== CONFIGURATIONS ===== # ========================== +MINSOC_SVN_URL="http://opencores.org/ocsvn/minsoc/minsoc/branches/rc-0.1" -# Where should I put the dir. minsoc? -# ex. /home/conx/Thesis/ -DIR_TO_INSTALL=`pwd` - -# This variable should be set to trunk -# or to stable. -VERSION="" - -# This variable should take one of -# the following values depending -# to your system: linux, cygwin, freebsd -ENV="" - -# !!! DO NOT EDIT BELLOW THIS LINE !!! -# =================================== - -# ===== SCRIPT ====== -# =================== - - # Debug ? export DEBUG=0; . beautify.sh @@ -88,6 +69,7 @@ # Wizard +DIR_TO_INSTALL=`pwd` if [ -z "${ALTDIR}" ] then cnecho "Give full path (ex. /home/foo/) for installation directory or leave empty for "${DIR_TO_INSTALL}": "; @@ -116,7 +98,7 @@ cecho "\nDownloading packages" cd ${DIR_TO_INSTALL} cecho "Download MinSoC" -svn co -q http://opencores.org/ocsvn/minsoc/minsoc/trunk/ minsoc #user need to input password, execcmd omits command output and should be this way +svn co -q ${MINSOC_SVN_URL} minsoc #user need to input password, execcmd omits command output and should be this way execcmd "cd ${DIR_TO_INSTALL}/download" if [ "$ENV" == "Cygwin" ] then @@ -243,39 +225,11 @@ execcmd "make install" -#Configuring MinSoC -cecho "\nConfiguring MinSoC" -execcmd "cd ${DIR_TO_INSTALL}/minsoc/backend/std" -execcmd "Configuring MinSoC as standard board (simulatable but not synthesizable)" "./configure" -execcmd "cd ${DIR_TO_INSTALL}" +#Configuring MinSoC, Advanced Debug System and patching OpenRISC +export ${DIR_TO_INSTALL} +bash configure.sh -#Configuring Advanced Debug System to work with MinSoC -cecho "\nConfiguring Advanced Debug System to work with MinSoC" -execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Hardware/adv_dbg_if/rtl/verilog" -sed "s%\`define DBG_JSP_SUPPORTED%//\`define DBG_JSP_SUPPORTED%" adbg_defines.v > TMPFILE && mv TMPFILE adbg_defines.v - -#Compiling and moving adv_jtag_bridge debug modules for simulation -execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge/sim_lib/icarus" -execcmd "make" -execcmd "cp jp-io-vpi.vpi ${DIR_TO_INSTALL}/minsoc/bench/verilog/vpi" - - -#Precompiling firmwares -cecho "\nPrecompiling delivered firmwares"; -execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/utils" -execcmd "Make utils" "make" - -execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/support" -execcmd "Make support tools" "make" - -execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/drivers" -execcmd "Make drivers" "make" - -execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/uart" -execcmd "Make UART" "make" - - #Setting-up new variables cecho "\nSystem configurations" execcmd "Adding MinSoC tools to PATH" "echo \"PATH=\\\$PATH:$DIR_TO_INSTALL/tools/bin\" >> /home/$(whoami)/.bashrc;";
/branches/rc-1.0/utils/setup/configure.sh
0,0 → 1,37
. beautify.sh
 
#Configuring MinSoC
cecho "\nConfiguring MinSoC"
execcmd "cd ${DIR_TO_INSTALL}/minsoc/backend/std"
execcmd "Configuring MinSoC as standard board (simulatable but not synthesizable)" "./configure"
execcmd "cd ${DIR_TO_INSTALL}"
 
 
#Configuring Advanced Debug System to work with MinSoC
cecho "\nConfiguring Advanced Debug System to work with MinSoC"
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Hardware/adv_dbg_if/rtl/verilog"
sed "s%\`define DBG_JSP_SUPPORTED%//\`define DBG_JSP_SUPPORTED%" adbg_defines.v > TMPFILE && mv TMPFILE adbg_defines.v
 
#Compiling and moving adv_jtag_bridge debug modules for simulation
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge/sim_lib/icarus"
execcmd "make"
execcmd "cp jp-io-vpi.vpi ${DIR_TO_INSTALL}/minsoc/bench/verilog/vpi"
 
#Patching OpenRISC Release 1 with Advanced Debug System patch for Watchpoints
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/or1200/rtl/verilog"
execcmd "patch -p0 < ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Patches/OR1200v1/or1200v1_hwbkpt.patch"
 
 
#Precompiling firmwares
cecho "\nPrecompiling delivered firmwares";
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/utils"
execcmd "Make utils" "make"
 
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/support"
execcmd "Make support tools" "make"
 
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/drivers"
execcmd "Make drivers" "make"
 
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/uart"
execcmd "Make UART" "make"
branches/rc-1.0/rtl/verilog Property changes : Modified: svn:externals ## -1,5 +1,5 ## -adv_debug_sys http://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk -ethmac http://opencores.org/ocsvn/ethmac/ethmac/trunk -or1200 http://opencores.org/ocsvn/openrisc/openrisc/trunk/or1200 -uart16550 http://opencores.org/ocsvn/uart16550/uart16550/trunk +adv_debug_sys -r58 http://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk +ethmac -r366 http://opencores.org/ocsvn/ethmac/ethmac/trunk +or1200 http://opencores.org/ocsvn/openrisc/openrisc/tags/or1200/rel1 +uart16550 -r108 http://opencores.org/ocsvn/uart16550/uart16550/trunk
/branches/rc-1.0/backend/altera_3c25_board/configure
17,7 → 17,7
 
PROJECT_FILE=minsoc_top.qsf
 
SYN_FILES=(adbg_top.prj jtag_top.prj or1200_top.prj uart_top.prj minsoc_top.prj altera_virtual_jtag.prj)
SYN_FILES=(adbg_top.vprj jtag_top.vprj or1200_top.vprj uart_top.vprj minsoc_top.vprj altera_virtual_jtag.vhdprj)
MAKEFILE=Makefile
 
FIND_PART='DEVICE_PART'
branches/rc-1.0/prj/scripts/altprj.sh Property changes : Deleted: svn:executable ## -1 +0,0 ## -* \ No newline at end of property Index: branches/rc-1.0/prj/scripts/simvhdl.sh =================================================================== --- branches/rc-1.0/prj/scripts/simvhdl.sh (revision 109) +++ branches/rc-1.0/prj/scripts/simvhdl.sh (revision 110) @@ -52,7 +52,7 @@ if [ $FOUND != 1 ] then - echo "FILE NOT FOUND" + echo "FILE NOT FOUND: $file" exit 1 fi done
/branches/rc-1.0/prj/scripts/xilinxprj.sh
54,7 → 54,7
 
if [ $FOUND != 1 ]
then
echo "FILE NOT FOUND"
echo "FILE NOT FOUND: $file"
exit 1
fi
done
/branches/rc-1.0/prj/scripts/altvhdprj.sh
0,0 → 1,64
#!/bin/bash
 
#system workings
MINSOC_DIR=`pwd`/..
 
PROJECT=$1
OUTPUT=$2
 
ENV=`uname -o`
 
function adaptpath
{
if [ "$ENV" == "Cygwin" ]
then
local cygpath=`cygpath -w $1`
local result=`echo $cygpath | sed 's/\\\\/\\//g'`
echo "$result"
else
echo "$1"
fi
}
 
if [ ! -f $PROJECT ]
then
echo "Unexistent project file."
exit 1
fi
 
if [ -z "$OUTPUT" ]
then
echo "Second argument should be the destintion file for the file and directory inclusions."
exit 1
fi
echo -n "" > $OUTPUT
 
source $PROJECT
 
for dir in "${PROJECT_DIR[@]}"
do
adapted_dir=`adaptpath $MINSOC_DIR/$dir`
echo "set_global_assignment -name SEARCH_PATH $adapted_dir" >> $OUTPUT
done
 
for file in "${PROJECT_SRC[@]}"
do
FOUND=0
 
for dir in "${PROJECT_DIR[@]}"
do
if [ -f $MINSOC_DIR/$dir/$file ]
then
adapted_file=`adaptpath $MINSOC_DIR/$dir/$file`
echo "set_global_assignment -name VHDL_FILE $adapted_file" >> $OUTPUT
FOUND=1
break
fi
done
 
if [ $FOUND != 1 ]
then
echo "FILE NOT FOUND: $file"
exit 1
fi
done
branches/rc-1.0/prj/scripts/altvhdprj.sh Property changes : Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Index: branches/rc-1.0/prj/scripts/simverilog.sh =================================================================== --- branches/rc-1.0/prj/scripts/simverilog.sh (revision 109) +++ branches/rc-1.0/prj/scripts/simverilog.sh (revision 110) @@ -58,7 +58,7 @@ if [ $FOUND != 1 ] then - echo "FILE NOT FOUND" + echo "FILE NOT FOUND: $file" exit 1 fi done
/branches/rc-1.0/prj/scripts/altvprj.sh
0,0 → 1,64
#!/bin/bash
 
#system workings
MINSOC_DIR=`pwd`/..
 
PROJECT=$1
OUTPUT=$2
 
ENV=`uname -o`
 
function adaptpath
{
if [ "$ENV" == "Cygwin" ]
then
local cygpath=`cygpath -w $1`
local result=`echo $cygpath | sed 's/\\\\/\\//g'`
echo "$result"
else
echo "$1"
fi
}
 
if [ ! -f $PROJECT ]
then
echo "Unexistent project file."
exit 1
fi
 
if [ -z "$OUTPUT" ]
then
echo "Second argument should be the destintion file for the file and directory inclusions."
exit 1
fi
echo -n "" > $OUTPUT
 
source $PROJECT
 
for dir in "${PROJECT_DIR[@]}"
do
adapted_dir=`adaptpath $MINSOC_DIR/$dir`
echo "set_global_assignment -name SEARCH_PATH $adapted_dir" >> $OUTPUT
done
 
for file in "${PROJECT_SRC[@]}"
do
FOUND=0
 
for dir in "${PROJECT_DIR[@]}"
do
if [ -f $MINSOC_DIR/$dir/$file ]
then
adapted_file=`adaptpath $MINSOC_DIR/$dir/$file`
echo "set_global_assignment -name VERILOG_FILE $adapted_file" >> $OUTPUT
FOUND=1
break
fi
done
 
if [ $FOUND != 1 ]
then
echo "FILE NOT FOUND: $file"
exit 1
fi
done
branches/rc-1.0/prj/scripts/altvprj.sh Property changes : Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Index: branches/rc-1.0/prj/src/or1200_top.prj =================================================================== --- branches/rc-1.0/prj/src/or1200_top.prj (revision 109) +++ branches/rc-1.0/prj/src/or1200_top.prj (revision 110) @@ -57,8 +57,4 @@ or1200_spram_128x32.v or1200_dc_fsm.v or1200_wb_biu.v -or1200_spram_64x22.v -or1200_fpu.v -or1200_spram.v -or1200_spram_32_bw.v -or1200_dpram.v) +or1200_spram_64x22.v) Index: branches/rc-1.0/prj/Makefile =================================================================== --- branches/rc-1.0/prj/Makefile (revision 109) +++ branches/rc-1.0/prj/Makefile (revision 110) @@ -11,15 +11,19 @@ SIM_VERILOG_FILES = $(addprefix $(SIMULATION_DIR)/, $(addsuffix .verilog, $(basename $(VERILOG_PROJECTS)))) SIM_VHDL_FILES = $(addprefix $(SIMULATION_DIR)/, $(addsuffix .vhdl, $(basename $(VHDL_PROJECTS)))) + XILINX_PRJ_FILES = $(addprefix $(XILINX_DIR)/, $(addsuffix .prj, $(basename $(PROJECTS)))) XILINX_XST_FILES = $(addprefix $(XILINX_DIR)/, $(addsuffix .xst, $(basename $(PROJECTS)))) -ALTERA_PRJ_FILES = $(addprefix $(ALTERA_DIR)/, $(addsuffix .prj, $(basename $(PROJECTS)))) -all: $(SIMULATION_DIR)/minsoc_verilog.src $(SIMULATION_DIR)/minsoc_vhdl.src $(XILINX_PRJ_FILES) $(XILINX_XST_FILES) $(ALTERA_PRJ_FILES) +ALTERA_VERILOG_PRJ_FILES = $(addprefix $(ALTERA_DIR)/, $(addsuffix .vprj, $(basename $(VERILOG_PROJECTS)))) +ALTERA_VHD_PRJ_FILES = $(addprefix $(ALTERA_DIR)/, $(addsuffix .vhdprj, $(basename $(VHDL_PROJECTS)))) +all: $(SIMULATION_DIR)/minsoc_verilog.src $(SIMULATION_DIR)/minsoc_vhdl.src $(XILINX_PRJ_FILES) $(XILINX_XST_FILES) $(ALTERA_VERILOG_PRJ_FILES) $(ALTERA_VHDL_PRJ_FILES) + clean: - rm -rf $(SIMULATION_DIR)/*.verilog $(SIMULATION_DIR)/*.vhdl $(SIMULATION_DIR)/*.src $(XILINX_DIR)/*.prj $(XILINX_DIR)/*.xst $(ALTERA_DIR)/*.prj + rm -rf $(SIMULATION_DIR)/*.verilog $(SIMULATION_DIR)/*.vhdl $(SIMULATION_DIR)/*.src $(XILINX_DIR)/*.prj $(XILINX_DIR)/*.xst $(ALTERA_DIR)/*.vprj $(ALTERA_DIR)/*.vhdprj + $(XILINX_DIR)/minsoc_top.xst: $(SRC_DIR)/minsoc_top.prj bash $(SCRIPTS_DIR)/xilinxxst.sh $^ $@ minsoc_top.prj minsoc_top topmodule @@ -32,9 +36,14 @@ $(XILINX_DIR)/%.prj: $(SRC_DIR)/%.prj bash $(SCRIPTS_DIR)/xilinxprj.sh $^ $@ -$(ALTERA_DIR)/%.prj: $(SRC_DIR)/%.prj - bash $(SCRIPTS_DIR)/altprj.sh $^ $@ +$(ALTERA_DIR)/%.vprj: $(SRC_DIR)/%.prj + bash $(SCRIPTS_DIR)/altvprj.sh $^ $@ + +$(ALTERA_DIR)/%.vhdprj: $(SRC_DIR)/%.prj + bash $(SCRIPTS_DIR)/altvhdprj.sh $^ $@ + + $(SIMULATION_DIR)/minsoc_verilog.src: $(SIM_VERILOG_FILES) cat $(SIM_VERILOG_FILES) > $(SIMULATION_DIR)/minsoc_verilog.src

powered by: WebSVN 2.1.0

© copyright 1999-2022 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.