OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

Compare Revisions

  • This comparison shows the changes necessary to convert path
    /minsoc
    from Rev 158 to Rev 159
    Reverse comparison

Rev 158 → Rev 159

/trunk/utils/setup/required-cygwin-tools.txt
9,4 → 9,5
ioperm
libusb-win32
flex
bison
bison
zlib-devel
/trunk/backend/de2_115_board/de2_115_board.ucf
20,12 → 20,15
# NOTES: pins G12, G9, Y2, and M23 above are overloaded by standard
# DE2_115 design terms below
 
# free PIN_P28 to be used after config - overloaded with HSMC
set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "USE AS REGULAR IO"
 
#============================================================
# CLOCK
#============================================================
set_location_assignment PIN_Y2 -to CLOCK_50
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CLOCK_50
#set_location_assignment PIN_Y2 -to CLOCK_50 // overloaded with 'clk'
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CLOCK_50
 
set_location_assignment PIN_AG14 -to CLOCK2_50
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to CLOCK2_50
set_location_assignment PIN_AG15 -to CLOCK3_50
100,8 → 103,9
#============================================================
# KEY
#============================================================
set_location_assignment PIN_M23 -to KEY[0]
set_instance_assignment -name IO_STANDARD "2.5 V" -to KEY[0]
#set_location_assignment PIN_M23 -to KEY[0]
#set_instance_assignment -name IO_STANDARD "2.5 V" -to KEY[0] // overloaded with 'reset'
 
set_location_assignment PIN_M21 -to KEY[1]
set_instance_assignment -name IO_STANDARD "2.5 V" -to KEY[1]
set_location_assignment PIN_N21 -to KEY[2]
315,11 → 319,13
 
#============================================================
# RS232
#============================================================
set_location_assignment PIN_G9 -to UART_TXD
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to UART_TXD
set_location_assignment PIN_G12 -to UART_RXD
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to UART_RXD
#============================================================
# Overloaded with MonSoc uart's uart_srx and uart_stx
#set_location_assignment PIN_G9 -to UART_TXD
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to UART_TXD
#set_location_assignment PIN_G12 -to UART_RXD
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to UART_RXD
 
set_location_assignment PIN_G14 -to UART_CTS
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to UART_CTS
set_location_assignment PIN_J13 -to UART_RTS

powered by: WebSVN 2.1.0

© copyright 1999-2020 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.