OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /minsoc/branches/rc-1.0/prj/src
    from Rev 96 to Rev 109
    ↔ Reverse comparison
  •

Rev 96 → Rev 109

/altera_virtual_jtag.prj
0,0 → 1,2
PROJECT_DIR=rtl/verilog/adv_debug_sys/Hardware/altera_virtual_jtag/rtl/vhdl/
PROJECT_SRC=altera_virtual_jtag.vhd
/minsoc_top.prj
0,0 → 1,17
PROJECT_DIR=(backend rtl/verilog rtl/verilog/minsoc_startup rtl/verilog/or1200/rtl/verilog rtl/verilog/adv_debug_sys/Hardware/adv_dbg_if/rtl/verilog rtl/verilog/ethmac/rtl/verilog rtl/verilog/uart16550/rtl/verilog)
PROJECT_SRC=(minsoc_defines.v
timescale.v
minsoc_top.v
minsoc_tc_top.v
minsoc_onchip_ram.v
minsoc_onchip_ram_top.v
minsoc_clock_manager.v
altera_pll.v
xilinx_dcm.v
minsoc_xilinx_internal_jtag.v
spi_top.v
spi_defines.v
spi_shift.v
spi_clgen.v
OR1K_startup_generic.v)
 
/minsoc_bench.prj
0,0 → 1,8
PROJECT_DIR=(backend bench/verilog bench/verilog/vpi bench/verilog/sim_lib rtl/verilog)
PROJECT_SRC=(minsoc_bench_defines.v
minsoc_bench.v
minsoc_memory_model.v
dbg_comm_vpi.v
fpga_memory_primitives.v
timescale.v)
 
/or1200_top.prj
0,0 → 1,64
PROJECT_DIR=rtl/verilog/or1200/rtl/verilog
PROJECT_SRC=(or1200_spram_512x20.v
or1200_spram_64x24.v
or1200_du.v
or1200_spram_2048x32_bw.v
or1200_rf.v
or1200_alu.v
or1200_dmmu_top.v
or1200_lsu.v
or1200_spram_1024x32.v
or1200_dc_top.v
or1200_cpu.v
or1200_gmultp2_32x32.v
or1200_immu_top.v
or1200_dpram_256x32.v
or1200_tt.v
or1200_iwb_biu.v
or1200_rfram_generic.v
or1200_dc_tag.v
or1200_spram_2048x8.v
or1200_immu_tlb.v
or1200_ic_tag.v
or1200_spram_64x14.v
or1200_spram_32x24.v
or1200_dpram_32x32.v
or1200_xcv_ram32x8d.v
or1200_spram_1024x8.v
or1200_mem2reg.v
or1200_pm.v
or1200_spram_256x21.v
or1200_operandmuxes.v
or1200_pic.v
or1200_cfgr.v
or1200_if.v
or1200_qmem_top.v
or1200_genpc.v
or1200_defines.v
or1200_wbmux.v
or1200_ic_ram.v
or1200_dmmu_tlb.v
or1200_sb_fifo.v
or1200_sprs.v
or1200_tpram_32x32.v
or1200_ctrl.v
or1200_sb.v
or1200_mult_mac.v
or1200_ic_fsm.v
or1200_amultp2_32x32.v
or1200_reg2mem.v
or1200_spram_2048x32.v
or1200_except.v
or1200_top.v
or1200_ic_top.v
or1200_dc_ram.v
or1200_spram_1024x32_bw.v
or1200_freeze.v
or1200_spram_128x32.v
or1200_dc_fsm.v
or1200_wb_biu.v
or1200_spram_64x22.v
or1200_fpu.v
or1200_spram.v
or1200_spram_32_bw.v
or1200_dpram.v)
/jtag_top.prj
0,0 → 1,3
PROJECT_DIR=rtl/verilog/adv_debug_sys/Hardware/jtag/tap/rtl/verilog
PROJECT_SRC=(tap_top.v
tap_defines.v)
/uart_top.prj
0,0 → 1,12
PROJECT_DIR=rtl/verilog/uart16550/rtl/verilog
PROJECT_SRC=(uart_top.v
uart_sync_flops.v
uart_transmitter.v
uart_debug_if.v
uart_wb.v
uart_receiver.v
uart_tfifo.v
uart_regs.v
uart_rfifo.v
uart_defines.v
raminfr.v)
/adbg_top.prj
0,0 → 1,11
PROJECT_DIR=rtl/verilog/adv_debug_sys/Hardware/adv_dbg_if/rtl/verilog
PROJECT_SRC=(adbg_wb_biu.v
adbg_wb_module.v
adbg_or1k_module.v
adbg_wb_defines.v
adbg_defines.v
adbg_crc32.v
adbg_or1k_biu.v
adbg_or1k_defines.v
adbg_or1k_status_reg.v
adbg_top.v)
/ethmac.prj
0,0 → 1,26
PROJECT_DIR=rtl/verilog/ethmac/rtl/verilog
PROJECT_SRC=(eth_cop.v
eth_registers.v
eth_rxethmac.v
eth_miim.v
ethmac.v
eth_rxaddrcheck.v
eth_outputcontrol.v
eth_rxstatem.v
eth_txethmac.v
eth_wishbone.v
eth_maccontrol.v
eth_txstatem.v
ethmac_defines.v
eth_spram_256x32.v
eth_shiftreg.v
eth_clockgen.v
eth_crc.v
eth_rxcounters.v
eth_macstatus.v
eth_random.v
eth_register.v
eth_fifo.v
eth_receivecontrol.v
eth_transmitcontrol.v
eth_txcounters.v)
/blackboxes/ethmac.v
0,0 → 1,113
 
 
`include "ethmac_defines.v"
 
module ethmac
(
// WISHBONE common
wb_clk_i, wb_rst_i, wb_dat_i, wb_dat_o,
 
// WISHBONE slave
wb_adr_i, wb_sel_i, wb_we_i, wb_cyc_i, wb_stb_i, wb_ack_o, wb_err_o,
 
// WISHBONE master
m_wb_adr_o, m_wb_sel_o, m_wb_we_o,
m_wb_dat_o, m_wb_dat_i, m_wb_cyc_o,
m_wb_stb_o, m_wb_ack_i, m_wb_err_i,
 
`ifdef ETH_WISHBONE_B3
m_wb_cti_o, m_wb_bte_o,
`endif
 
//TX
mtx_clk_pad_i, mtxd_pad_o, mtxen_pad_o, mtxerr_pad_o,
 
//RX
mrx_clk_pad_i, mrxd_pad_i, mrxdv_pad_i, mrxerr_pad_i, mcoll_pad_i, mcrs_pad_i,
// MIIM
mdc_pad_o, md_pad_i, md_pad_o, md_padoe_o,
 
int_o
 
// Bist
`ifdef ETH_BIST
,
// debug chain signals
mbist_si_i, // bist scan serial in
mbist_so_o, // bist scan serial out
mbist_ctrl_i // bist chain shift control
`endif
 
);
 
 
parameter Tp = 1;
 
 
// WISHBONE common
input wb_clk_i; // WISHBONE clock
input wb_rst_i; // WISHBONE reset
input [31:0] wb_dat_i; // WISHBONE data input
output [31:0] wb_dat_o; // WISHBONE data output
output wb_err_o; // WISHBONE error output
 
// WISHBONE slave
input [11:2] wb_adr_i; // WISHBONE address input
input [3:0] wb_sel_i; // WISHBONE byte select input
input wb_we_i; // WISHBONE write enable input
input wb_cyc_i; // WISHBONE cycle input
input wb_stb_i; // WISHBONE strobe input
output wb_ack_o; // WISHBONE acknowledge output
 
// WISHBONE master
output [31:0] m_wb_adr_o;
output [3:0] m_wb_sel_o;
output m_wb_we_o;
input [31:0] m_wb_dat_i;
output [31:0] m_wb_dat_o;
output m_wb_cyc_o;
output m_wb_stb_o;
input m_wb_ack_i;
input m_wb_err_i;
 
wire [29:0] m_wb_adr_tmp;
 
`ifdef ETH_WISHBONE_B3
output [2:0] m_wb_cti_o; // Cycle Type Identifier
output [1:0] m_wb_bte_o; // Burst Type Extension
`endif
 
// Tx
input mtx_clk_pad_i; // Transmit clock (from PHY)
output [3:0] mtxd_pad_o; // Transmit nibble (to PHY)
output mtxen_pad_o; // Transmit enable (to PHY)
output mtxerr_pad_o; // Transmit error (to PHY)
 
// Rx
input mrx_clk_pad_i; // Receive clock (from PHY)
input [3:0] mrxd_pad_i; // Receive nibble (from PHY)
input mrxdv_pad_i; // Receive data valid (from PHY)
input mrxerr_pad_i; // Receive data error (from PHY)
 
// Common Tx and Rx
input mcoll_pad_i; // Collision (from PHY)
input mcrs_pad_i; // Carrier sense (from PHY)
 
// MII Management interface
input md_pad_i; // MII data input (from I/O cell)
output mdc_pad_o; // MII Management data clock (to PHY)
output md_pad_o; // MII data output (to I/O cell)
output md_padoe_o; // MII data output enable (to I/O cell)
 
output int_o; // Interrupt output
 
// Bist
`ifdef ETH_BIST
input mbist_si_i; // bist scan serial in
output mbist_so_o; // bist scan serial out
input [`ETH_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i; // bist chain shift control
`endif
 
 
endmodule
/blackboxes/uart_top.v
0,0 → 1,58
 
 
`include "uart_defines.v"
 
module uart_top (
wb_clk_i,
// Wishbone signals
wb_rst_i, wb_adr_i, wb_dat_i, wb_dat_o, wb_we_i, wb_stb_i, wb_cyc_i, wb_ack_o, wb_sel_i,
int_o, // interrupt request
 
// UART signals
// serial input/output
stx_pad_o, srx_pad_i,
 
// modem signals
rts_pad_o, cts_pad_i, dtr_pad_o, dsr_pad_i, ri_pad_i, dcd_pad_i
`ifdef UART_HAS_BAUDRATE_OUTPUT
, baud_o
`endif
);
 
parameter uart_data_width = `UART_DATA_WIDTH;
parameter uart_addr_width = `UART_ADDR_WIDTH;
 
input wb_clk_i;
 
// WISHBONE interface
input wb_rst_i;
input [uart_addr_width-1:0] wb_adr_i;
input [uart_data_width-1:0] wb_dat_i;
output [uart_data_width-1:0] wb_dat_o;
input wb_we_i;
input wb_stb_i;
input wb_cyc_i;
input [3:0] wb_sel_i;
output wb_ack_o;
output int_o;
 
// UART signals
input srx_pad_i;
output stx_pad_o;
output rts_pad_o;
input cts_pad_i;
output dtr_pad_o;
input dsr_pad_i;
input ri_pad_i;
input dcd_pad_i;
 
// optional baudrate output
`ifdef UART_HAS_BAUDRATE_OUTPUT
output baud_o;
`endif
 
 
endmodule
 
 
/blackboxes/adbg_top.v
0,0 → 1,180
 
 
`include "adbg_defines.v"
 
module adbg_top(
// JTAG signals
tck_i,
tdi_i,
tdo_o,
rst_i,
 
 
// TAP states
shift_dr_i,
pause_dr_i,
update_dr_i,
capture_dr_i,
 
// Instructions
debug_select_i
 
 
`ifdef DBG_WISHBONE_SUPPORTED
// WISHBONE common signals
,
wb_clk_i,
wb_rst_i,
// WISHBONE master interface
wb_adr_o,
wb_dat_o,
wb_dat_i,
wb_cyc_o,
wb_stb_o,
wb_sel_o,
wb_we_o,
wb_ack_i,
wb_cab_o,
wb_err_i,
wb_cti_o,
wb_bte_o
`endif
 
`ifdef DBG_CPU0_SUPPORTED
// CPU signals
,
cpu0_clk_i,
cpu0_addr_o,
cpu0_data_i,
cpu0_data_o,
cpu0_bp_i,
cpu0_stall_o,
cpu0_stb_o,
cpu0_we_o,
cpu0_ack_i,
cpu0_rst_o
`endif
 
`ifdef DBG_CPU1_SUPPORTED
// CPU signals
,
cpu1_clk_i,
cpu1_addr_o,
cpu1_data_i,
cpu1_data_o,
cpu1_bp_i,
cpu1_stall_o,
cpu1_stb_o,
cpu1_we_o,
cpu1_ack_i,
cpu1_rst_o
`endif
`ifdef DBG_JSP_SUPPORTED
,
`ifndef DBG_WISHBONE_SUPPORTED
wb_clk_i,
wb_rst_i,
`endif
// WISHBONE target interface
wb_jsp_adr_i,
wb_jsp_dat_o,
wb_jsp_dat_i,
wb_jsp_cyc_i,
wb_jsp_stb_i,
wb_jsp_sel_i,
wb_jsp_we_i,
wb_jsp_ack_o,
wb_jsp_cab_i,
wb_jsp_err_o,
wb_jsp_cti_i,
wb_jsp_bte_i,
int_o
`endif
);
 
 
// JTAG signals
input tck_i;
input tdi_i;
output tdo_o;
input rst_i;
 
// TAP states
input shift_dr_i;
input pause_dr_i;
input update_dr_i;
input capture_dr_i;
 
// Module select from TAP
input debug_select_i;
 
`ifdef DBG_WISHBONE_SUPPORTED
input wb_clk_i;
input wb_rst_i;
output [31:0] wb_adr_o;
output [31:0] wb_dat_o;
input [31:0] wb_dat_i;
output wb_cyc_o;
output wb_stb_o;
output [3:0] wb_sel_o;
output wb_we_o;
input wb_ack_i;
output wb_cab_o;
input wb_err_i;
output [2:0] wb_cti_o;
output [1:0] wb_bte_o;
`endif
 
`ifdef DBG_CPU0_SUPPORTED
// CPU signals
input cpu0_clk_i;
output [31:0] cpu0_addr_o;
input [31:0] cpu0_data_i;
output [31:0] cpu0_data_o;
input cpu0_bp_i;
output cpu0_stall_o;
output cpu0_stb_o;
output cpu0_we_o;
input cpu0_ack_i;
output cpu0_rst_o;
`endif
 
`ifdef DBG_CPU1_SUPPORTED
input cpu1_clk_i;
output [31:0] cpu1_addr_o;
input [31:0] cpu1_data_i;
output [31:0] cpu1_data_o;
input cpu1_bp_i;
output cpu1_stall_o;
output cpu1_stb_o;
output cpu1_we_o;
input cpu1_ack_i;
output cpu1_rst_o;
`endif
 
`ifdef DBG_JSP_SUPPORTED
`ifndef DBG_WISHBONE_SUPPORTED
input wb_clk_i;
input wb_rst_i;
`endif
input [31:0] wb_jsp_adr_i;
output [31:0] wb_jsp_dat_o;
input [31:0] wb_jsp_dat_i;
input wb_jsp_cyc_i;
input wb_jsp_stb_i;
input [3:0] wb_jsp_sel_i;
input wb_jsp_we_i;
output wb_jsp_ack_o;
input wb_jsp_cab_i;
output wb_jsp_err_o;
input [2:0] wb_jsp_cti_i;
input [1:0] wb_jsp_bte_i;
output int_o;
`endif
 
 
endmodule
/blackboxes/or1200_top.v
0,0 → 1,152
 
 
`include "or1200_defines.v"
 
module or1200_top(
// System
clk_i, rst_i, pic_ints_i, clmode_i,
 
// Instruction WISHBONE INTERFACE
iwb_clk_i, iwb_rst_i, iwb_ack_i, iwb_err_i, iwb_rty_i, iwb_dat_i,
iwb_cyc_o, iwb_adr_o, iwb_stb_o, iwb_we_o, iwb_sel_o, iwb_dat_o,
`ifdef OR1200_WB_CAB
iwb_cab_o,
`endif
`ifdef OR1200_WB_B3
iwb_cti_o, iwb_bte_o,
`endif
// Data WISHBONE INTERFACE
dwb_clk_i, dwb_rst_i, dwb_ack_i, dwb_err_i, dwb_rty_i, dwb_dat_i,
dwb_cyc_o, dwb_adr_o, dwb_stb_o, dwb_we_o, dwb_sel_o, dwb_dat_o,
`ifdef OR1200_WB_CAB
dwb_cab_o,
`endif
`ifdef OR1200_WB_B3
dwb_cti_o, dwb_bte_o,
`endif
 
// External Debug Interface
dbg_stall_i, dbg_ewt_i, dbg_lss_o, dbg_is_o, dbg_wp_o, dbg_bp_o,
dbg_stb_i, dbg_we_i, dbg_adr_i, dbg_dat_i, dbg_dat_o, dbg_ack_o,
`ifdef OR1200_BIST
// RAM BIST
mbist_si_i, mbist_so_o, mbist_ctrl_i,
`endif
// Power Management
pm_cpustall_i,
pm_clksd_o, pm_dc_gate_o, pm_ic_gate_o, pm_dmmu_gate_o,
pm_immu_gate_o, pm_tt_gate_o, pm_cpu_gate_o, pm_wakeup_o, pm_lvolt_o
 
,sig_tick
 
);
 
parameter dw = `OR1200_OPERAND_WIDTH;
parameter aw = `OR1200_OPERAND_WIDTH;
parameter ppic_ints = `OR1200_PIC_INTS;
 
//
// I/O
//
 
//
// System
//
input clk_i;
input rst_i;
input [1:0] clmode_i; // 00 WB=RISC, 01 WB=RISC/2, 10 N/A, 11 WB=RISC/4
input [ppic_ints-1:0] pic_ints_i;
 
//
// Instruction WISHBONE interface
//
input iwb_clk_i; // clock input
input iwb_rst_i; // reset input
input iwb_ack_i; // normal termination
input iwb_err_i; // termination w/ error
input iwb_rty_i; // termination w/ retry
input [dw-1:0] iwb_dat_i; // input data bus
output iwb_cyc_o; // cycle valid output
output [aw-1:0] iwb_adr_o; // address bus outputs
output iwb_stb_o; // strobe output
output iwb_we_o; // indicates write transfer
output [3:0] iwb_sel_o; // byte select outputs
output [dw-1:0] iwb_dat_o; // output data bus
`ifdef OR1200_WB_CAB
output iwb_cab_o; // indicates consecutive address burst
`endif
`ifdef OR1200_WB_B3
output [2:0] iwb_cti_o; // cycle type identifier
output [1:0] iwb_bte_o; // burst type extension
`endif
 
//
// Data WISHBONE interface
//
input dwb_clk_i; // clock input
input dwb_rst_i; // reset input
input dwb_ack_i; // normal termination
input dwb_err_i; // termination w/ error
input dwb_rty_i; // termination w/ retry
input [dw-1:0] dwb_dat_i; // input data bus
output dwb_cyc_o; // cycle valid output
output [aw-1:0] dwb_adr_o; // address bus outputs
output dwb_stb_o; // strobe output
output dwb_we_o; // indicates write transfer
output [3:0] dwb_sel_o; // byte select outputs
output [dw-1:0] dwb_dat_o; // output data bus
`ifdef OR1200_WB_CAB
output dwb_cab_o; // indicates consecutive address burst
`endif
`ifdef OR1200_WB_B3
output [2:0] dwb_cti_o; // cycle type identifier
output [1:0] dwb_bte_o; // burst type extension
`endif
 
//
// External Debug Interface
//
input dbg_stall_i; // External Stall Input
input dbg_ewt_i; // External Watchpoint Trigger Input
output [3:0] dbg_lss_o; // External Load/Store Unit Status
output [1:0] dbg_is_o; // External Insn Fetch Status
output [10:0] dbg_wp_o; // Watchpoints Outputs
output dbg_bp_o; // Breakpoint Output
input dbg_stb_i; // External Address/Data Strobe
input dbg_we_i; // External Write Enable
input [aw-1:0] dbg_adr_i; // External Address Input
input [dw-1:0] dbg_dat_i; // External Data Input
output [dw-1:0] dbg_dat_o; // External Data Output
output dbg_ack_o; // External Data Acknowledge (not WB compatible)
 
`ifdef OR1200_BIST
//
// RAM BIST
//
input mbist_si_i;
input [`OR1200_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i;
output mbist_so_o;
`endif
 
//
// Power Management
//
input pm_cpustall_i;
output [3:0] pm_clksd_o;
output pm_dc_gate_o;
output pm_ic_gate_o;
output pm_dmmu_gate_o;
output pm_immu_gate_o;
output pm_tt_gate_o;
output pm_cpu_gate_o;
output pm_wakeup_o;
output pm_lvolt_o;
 
//
// CPU and TT
//
output sig_tick; // jb
 
 
endmodule

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.