OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /minsoc
    from Rev 167 to Rev 168
    ↔ Reverse comparison
  •

Rev 167 → Rev 168

/trunk/utils/setup/minsoc-install.sh
50,28 → 50,56
fi;
 
 
# Selecting automated or advanced intallation modes
# Wizard
if [ -z "${AUTO}" ]
then
while [ "${AUTO}" != "R" ] && [ "${AUTO}" != "A" ]
do
cecho "Select installation mode.";
cnecho " Enter R for Resumed or A for Advanced mode or H for Help: "
read AUTO;
if [ ${AUTO} == "H" ]
then
cecho "Advanced mode:"
cecho " the script only downloads and installs the required tools. Dependency libraries and tools are checked during individual tool compilation. Furthermore, the install directory is not added to the system PATH. You have to do it yourself. Libusb, libftdi and Icarus Verilog are supposed to be installed by the user.\n"
cecho "Resumed mode:"
cecho " the script checks if the dependency libraries and tools are installed before doing anything. It also adds the installation directory to the system PATH variable for bash shells on HOME/.bashrc. Libusb, libftdi and Icarus Verilog are automatically installed for you.\n"
fi
done
if [ "${AUTO}" == "R" ]
then
cecho "Resumed mode selected";
else
cecho "Advanced mode selected";
fi
fi
 
 
# Testing necessary tools
cecho "Testing if necessary tools are installed, program "whereis" is required."
testtool wget
testtool svn
testtool bzip2
testtool tar
testtool sed
testtool patch
testtool gcc
testtool make
testtool makeinfo
testtool libncurses
testtool flex
testtool bison
testtool libz
if [ "$ENV" == "Cygwin" ]
if [ "${AUTO}" == "R" ]
then
testtool ioperm
testtool libusb
cecho "Testing if necessary tools are installed, program "whereis" is required."
testtool wget
testtool svn
testtool bzip2
testtool tar
testtool sed
testtool patch
testtool gcc
testtool make
testtool makeinfo
testtool libncurses
testtool flex
testtool bison
testtool libz
if [ "$ENV" == "Cygwin" ]
then
testtool ioperm
testtool libusb
fi
fi
 
 
# Wizard
if [ -z "${ALTDIR}" ]
then
123,12 → 151,15
execcmd "Downloading GDB" "wget ftp://anonymous:anonymous@ftp.gnu.org/gnu/gdb/gdb-6.8a.tar.bz2"
execcmd "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-gdb-6.8-patch-2.4.bz2"
execcmd "svn export -q http://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk/Patches/GDB6.8/gdb-6.8-bz436037-reg-no-longer-active.patch"
if [ "$ENV" != "Cygwin" ]
if [ "${AUTO}" == "R" ]
then
execcmd "Downloading libusb-0.1 for Advanced Debug System" "wget http://sourceforge.net/projects/libusb/files/libusb-0.1%20%28LEGACY%29/0.1.12/libusb-0.1.12.tar.gz"
if [ "$ENV" != "Cygwin" ]
then
execcmd "Downloading libusb-0.1 for Advanced Debug System" "wget http://sourceforge.net/projects/libusb/files/libusb-0.1%20%28LEGACY%29/0.1.12/libusb-0.1.12.tar.gz"
fi
execcmd "Downloading libftdi for Advanced Debug System" "wget http://www.intra2net.com/en/developer/libftdi/download/libftdi-0.19.tar.gz"
execcmd "Downloading Icarus Verilog" "wget ftp://icarus.com/pub/eda/verilog/v0.9/verilog-0.9.4.tar.gz"
fi
execcmd "Downloading libftdi for Advanced Debug System" "wget http://www.intra2net.com/en/developer/libftdi/download/libftdi-0.19.tar.gz"
execcmd "Downloading Icarus Verilog" "wget ftp://icarus.com/pub/eda/verilog/v0.9/verilog-0.9.4.tar.gz"
 
 
#Uncompressing everything
147,12 → 178,15
fi
execcmd "tar -jxf gdb-6.8a.tar.bz2"
execcmd "bzip2 -d or32-gdb-6.8-patch-2.4.bz2"
if [ "$ENV" != "Cygwin" ]
if [ "${AUTO}" == "R" ]
then
execcmd "tar zxf libusb-0.1.12.tar.gz"
if [ "$ENV" != "Cygwin" ]
then
execcmd "tar zxf libusb-0.1.12.tar.gz"
fi
execcmd "tar zxf libftdi-0.19.tar.gz"
execcmd "tar zxf verilog-0.9.4.tar.gz"
fi
execcmd "tar zxf libftdi-0.19.tar.gz"
execcmd "tar zxf verilog-0.9.4.tar.gz"
 
 
#Compiling and Installing all packages
187,20 → 221,23
 
 
#Installing Advanced JTAG Bridge support libraries
if [ "$ENV" != "Cygwin" ]
if [ "${AUTO}" == "R" ]
then
execcmd "cd ${DIR_TO_INSTALL}/download/libusb-0.1.12"
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
execcmd "Installing libusb-0.1" "make"
execcmd "make install"
if [ "$ENV" != "Cygwin" ]
then
execcmd "cd ${DIR_TO_INSTALL}/download/libusb-0.1.12"
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
execcmd "Installing libusb-0.1" "make"
execcmd "make install"
fi
 
execcmd "cd ${DIR_TO_INSTALL}/download/libftdi-0.19"
execcmd "PATH=\"$PATH:${DIR_TO_INSTALL}/tools/bin\" ./configure --prefix=${DIR_TO_INSTALL}/tools CPPFLAGS=-I${DIR_TO_INSTALL}/tools/include"
execcmd "Compiling libftdi" "make"
execcmd "make install"
fi
 
execcmd "cd ${DIR_TO_INSTALL}/download/libftdi-0.19"
execcmd "PATH=\"$PATH:${DIR_TO_INSTALL}/tools/bin\" ./configure --prefix=${DIR_TO_INSTALL}/tools CPPFLAGS=-I${DIR_TO_INSTALL}/tools/include"
execcmd "Compiling libftdi" "make"
execcmd "make install"
 
 
#Installing Advanced JTAG Bridge
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge"
execcmd "./autogen.sh"
210,10 → 247,13
 
 
#Installing Icarus Verilog
execcmd "cd ${DIR_TO_INSTALL}/download/verilog-0.9.4"
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
execcmd "Compiling Icarus Verilog" "make"
execcmd "make install"
if [ "${AUTO}" == "R" ]
then
execcmd "cd ${DIR_TO_INSTALL}/download/verilog-0.9.4"
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
execcmd "Compiling Icarus Verilog" "make"
execcmd "make install"
fi
 
 
#Configuring MinSoC, Advanced Debug System and patching OpenRISC
221,10 → 261,20
 
 
#Setting-up new variables
cecho "\nSystem configurations"
execcmd "Adding MinSoC tools to PATH" "echo \"PATH=\\\"\\\$PATH:$DIR_TO_INSTALL/tools/bin\\\"\" >> /home/$(whoami)/.bashrc;";
execcmd "Adding OpenRISC toolchain to PATH" "echo \"PATH=\\\"\\\$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin/\\\"\" >> /home/$(whoami)/.bashrc;";
if [ "${AUTO}" == "R" ]
then
cecho "\nSystem configurations"
execcmd "Adding MinSoC tools to PATH" "echo \"PATH=\\\"\\\$PATH:$DIR_TO_INSTALL/tools/bin\\\"\" >> /home/$(whoami)/.bashrc;";
execcmd "Adding OpenRISC toolchain to PATH" "echo \"PATH=\\\"\\\$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin/\\\"\" >> /home/$(whoami)/.bashrc;";
 
cecho "\nInstallation Complete!"
cecho "Before using the system, load the new environment variables doing this: source /home/$(whoami)/.bashrc"
cecho "You may remove the ${DIR_TO_INSTALL}/download directory if you wish."
cecho "\nInstallation Complete!"
cecho "Before using the system, load the new environment variables doing this: source /home/$(whoami)/.bashrc"
cecho "You may remove the ${DIR_TO_INSTALL}/download directory if you wish."
else
cecho "\nInstallation Complete!\n"
cecho "Remember to add the two following directories in the following order to the PATH system variable."
cecho "1) $DIR_TO_INSTALL/tools/bin "
cecho "2) $DIR_TO_INSTALL/tools/or32-elf/bin "
cecho "You may remove the ${DIR_TO_INSTALL}/download directory if you wish."
fi
 
/trunk/backend/spartan3e_starter_kit/configure
43,12 → 43,23
echo "THIS SCRIPT HAS A NON-STANDARD BEGINNING."
echo "__________________________________________________________________________"
echo "${BOARD} requires another configuration for or1200."
echo ""
 
echo "Otherwise, the design won't fit on your FPGA because of area restrictions. If you select no, you can manually copy the or1200_defines.v from this directory to minsoc/rtl/verilog/or1200/rtl/verilog later to overcome this safely."
echo ""
echo "Copying or1200_defines.v, to or1200 implementation directory..."
echo "(minsoc/rtl/verilog/or1200/rtl/verilog)"
echo "__________________________________________________________________________"
cp $BOARD_DIR/or1200_defines.v $MINSOC_DIR/rtl/verilog/or1200/rtl/verilog
 
echo -n "This will modify the standard or1200_defines.v file. Proceed? [Y/n]: "
read REPLY;
if [ "$REPLY" = "y" ] || [ -z "$REPLY" ]
then
echo ""
echo "Backing up original or1200_defines.v as or1200_defines.bak..."
echo "Copying or1200_defines.v, to or1200 implementation directory..."
echo "(minsoc/rtl/verilog/or1200/rtl/verilog)"
echo "__________________________________________________________________________"
mv $MINSOC_DIR/rtl/verilog/or1200/rtl/verilog/or1200_defines.v $MINSOC_DIR/rtl/verilog/or1200/rtl/verilog/or1200_defines.bak
cp $BOARD_DIR/or1200_defines.v $MINSOC_DIR/rtl/verilog/or1200/rtl/verilog
fi
echo ""
echo "REGULAR SCRIPT STARTS NOW"
echo "__________________________________________________________________________"
/trunk/backend/spartan3e_starter_kit_eth/configure
43,12 → 43,23
echo "THIS SCRIPT HAS A NON-STANDARD BEGINNING."
echo "__________________________________________________________________________"
echo "${BOARD} requires another configuration for or1200."
echo ""
 
echo "Otherwise, the design won't fit on your FPGA because of area restrictions. If you select no, you can manually copy the or1200_defines.v from this directory to minsoc/rtl/verilog/or1200/rtl/verilog later to overcome this safely."
echo ""
echo "Copying or1200_defines.v, to or1200 implementation directory..."
echo "(minsoc/rtl/verilog/or1200/rtl/verilog)"
echo "__________________________________________________________________________"
cp $BOARD_DIR/or1200_defines.v $MINSOC_DIR/rtl/verilog/or1200/rtl/verilog
 
echo -n "This will modify the standard or1200_defines.v file. Proceed? [Y/n]: "
read REPLY;
if [ "$REPLY" = "y" ] || [ -z "$REPLY" ]
then
echo ""
echo "Backing up original or1200_defines.v as or1200_defines.bak..."
echo "Copying or1200_defines.v, to or1200 implementation directory..."
echo "(minsoc/rtl/verilog/or1200/rtl/verilog)"
echo "__________________________________________________________________________"
mv $MINSOC_DIR/rtl/verilog/or1200/rtl/verilog/or1200_defines.v $MINSOC_DIR/rtl/verilog/or1200/rtl/verilog/or1200_defines.bak
cp $BOARD_DIR/or1200_defines.v $MINSOC_DIR/rtl/verilog/or1200/rtl/verilog
fi
echo ""
echo "REGULAR SCRIPT STARTS NOW"
echo "__________________________________________________________________________"

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.