OpenCores
URL https://opencores.org/ocsvn/mod_sim_exp/mod_sim_exp/trunk

Subversion Repositories mod_sim_exp

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /mod_sim_exp/trunk/rtl
    from Rev 45 to Rev 50
    ↔ Reverse comparison
  •

Rev 45 → Rev 50

/vhdl/ram/dpram_xilinx.vhd
0,0 → 1,135
--------------------------------------------------------------------------------
-- Entity: ram_xilinx
-- Date:2013-02-19
-- Author: Dinghe
--
-- Description ${cursor}
--------------------------------------------------------------------------------
--
-- WIDTHA = 32
-- SIZEA = 32
-- ADDRWIDTHA = 5
-- WIDTHB = 512
-- SIZEB = 2
-- ADDRWIDTHB = 1
-- Found 32x32:2x512-bit dual-port RAM <Mram_ram> for signal <ram>.
-- Found 512-bit register for signal <doB>.
-- Found 512-bit register for signal <readB>.
-- Summary:
-- inferred 1 RAM(s).
-- inferred 1024 D-type flip-flop(s).
--
 
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
use ieee.std_logic_arith.all;
 
entity dpram_xilinx is
 
generic (
WIDTHA : integer := 32;
SIZEA : integer := 32;
ADDRWIDTHA : integer := 5;
WIDTHB : integer := 512;
SIZEB : integer := 2;
ADDRWIDTHB : integer := 1
);
 
port (
clkA : in std_logic;
clkB : in std_logic;
enB : in std_logic;
weA : in std_logic;
addrA : in std_logic_vector(ADDRWIDTHA-1 downto 0);
addrB : in std_logic_vector(ADDRWIDTHB-1 downto 0);
diA : in std_logic_vector(WIDTHA-1 downto 0);
doA : out std_logic_vector(WIDTHA-1 downto 0);
doB : out std_logic_vector(WIDTHB-1 downto 0)
);
 
end dpram_xilinx;
 
architecture behavioral of dpram_xilinx is
 
function max(L, R: INTEGER) return INTEGER is
begin
if L > R then
return L;
else
return R;
end if;
end;
 
function min(L, R: INTEGER) return INTEGER is
begin
if L < R then
return L;
else
return R;
end if;
end;
 
function log2 (val: INTEGER) return natural is
variable res : natural;
begin
for i in 0 to 31 loop
if (val <= (2**i)) then
res := i;
exit;
end if;
end loop;
return res;
end function Log2;
 
constant minWIDTH : integer := min(WIDTHA,WIDTHB);
constant maxWIDTH : integer := max(WIDTHA,WIDTHB);
constant maxSIZE : integer := max(SIZEA,SIZEB);
constant RATIO : integer := maxWIDTH / minWIDTH;
 
-- An asymmetric RAM is modelled in a similar way as a symmetric RAM, with an
-- array of array object. Its aspect ratio corresponds to the port with the
-- lower data width (larger depth)
type ramType is array (0 to maxSIZE-1) of std_logic_vector(minWIDTH-1 downto 0);
 
-- You need to declare ram as a shared variable when :
-- - the RAM has two write ports,
-- - the RAM has only one write port whose data width is maxWIDTH
-- In all other cases, ram can be a signal.
shared variable ram : ramType := (others => (others => '0'));
signal readA : std_logic_vector(WIDTHA-1 downto 0):= (others => '0');
signal readB : std_logic_vector(WIDTHB-1 downto 0):= (others => '0');
signal regA : std_logic_vector(WIDTHA-1 downto 0):= (others => '0');
signal regB : std_logic_vector(WIDTHB-1 downto 0):= (others => '0');
 
begin
 
-- port A: only write
process (clkA)
begin
if rising_edge(clkA) then
if weA = '1' then
ram(conv_integer(addrA)) := diA;
end if;
end if;
end process;
 
-- port B: only read
process (clkB)
begin
if rising_edge(clkB) then
if enB = '1' then
for i in 0 to RATIO-1 loop
readB((i+1)*minWIDTH-1 downto i*minWIDTH)
<= ram(conv_integer(addrB & conv_std_logic_vector(i,log2(RATIO))));
end loop;
end if;
regB <= readB;
end if;
end process;
 
doA <= regA;
doB <= regB;
end behavioral;

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.