Subversion Repositories qaz_libs

/trunk/PRBS/PRBS-23/PRBS-23.cr.mti

/trunk/PRBS/PRBS-23/vsim.wlf Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream

/trunk/PRBS/PRBS-23/vsim.wlf

trunk/PRBS/PRBS-23/vsim.wlf Property changes : Added: svn:mime-type ## -0,0 +1 ## +application/octet-stream \ No newline at end of property Index: trunk/PRBS/PRBS-23/PRBS-23.mpf =================================================================== --- trunk/PRBS/PRBS-23/PRBS-23.mpf (nonexistent) +++ trunk/PRBS/PRBS-23/PRBS-23.mpf (revision 3) @@ -0,0 +1,1585 @@ +; Copyright 1991-2010 Mentor Graphics Corporation +; +; All Rights Reserved. +; +; THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS THE PROPERTY OF +; MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS SUBJECT TO LICENSE TERMS. +; + +[Library] +std = $MODEL_TECH/../std +ieee = $MODEL_TECH/../ieee +verilog = $MODEL_TECH/../verilog +; to use Vital 1995 version of the standard +; IEEE library must be mapped to the vital1995 library +; one cannot use the vital1995 library directly because it assume that it +; is the IEEE library. If vital1995 and vital2000 are being mixed together then +; ieee must be mapped to vital1995 and vital200 mapped to vital2000 +; ieee = $MODEL_TECH/../vital1995 +; for compatiblity with previously the VITAL2000 maps to a seperate library from IEEE +; if one should not reference vital from both the ieee library and the vital library becasue +; the vital packages are effectively different. If one needs to reference both libraies the +; vital2000 and ieee MUST be mapped to the same library either $MODEL_TECH/../ieee +; or $MODEL_TECH/../vital2000 +vital2000 = $MODEL_TECH/../vital2000 +std_developerskit = $MODEL_TECH/../std_developerskit +synopsys = $MODEL_TECH/../synopsys +modelsim_lib = $MODEL_TECH/../modelsim_lib +sv_std = $MODEL_TECH/../sv_std +mtiAvm = $MODEL_TECH/../avm +mtiOvm = $MODEL_TECH/../ovm-2.1.1 +mtiUPF = $MODEL_TECH/../upf_lib +mtiPA = $MODEL_TECH/../pa_lib +floatfixlib = $MODEL_TECH/../floatfixlib +mc2_lib = $MODEL_TECH/../mc2_lib +;vhdl_psl_checkers = $MODEL_TECH/../vhdl_psl_checkers // Source files only for this release +;verilog_psl_checkers = $MODEL_TECH/../verilog_psl_checkers // Source files only for this release +;mvc_lib = $MODEL_TECH/../mvc_lib + +work = work +[vcom] +; VHDL93 variable selects language version as the default. +; Default is VHDL-2002. +; Value of 0 or 1987 for VHDL-1987. +; Value of 1 or 1993 for VHDL-1993. +; Default or value of 2 or 2002 for VHDL-2002. +; Value of 3 or 2008 for VHDL-2008 +VHDL93 = 2002 + +; Show source line containing error. Default is off. +; Show_source = 1 + +; Turn off unbound-component warnings. Default is on. +; Show_Warning1 = 0 + +; Turn off process-without-a-wait-statement warnings. Default is on. +; Show_Warning2 = 0 + +; Turn off null-range warnings. Default is on. +; Show_Warning3 = 0 + +; Turn off no-space-in-time-literal warnings. Default is on. +; Show_Warning4 = 0 + +; Turn off multiple-drivers-on-unresolved-signal warnings. Default is on. +; Show_Warning5 = 0 + +; Turn off optimization for IEEE std_logic_1164 package. Default is on. +; Optimize_1164 = 0 + +; Turn on resolving of ambiguous function overloading in favor of the +; "explicit" function declaration (not the one automatically created by +; the compiler for each type declaration). Default is off. +; The .ini file has Explicit enabled so that std_logic_signed/unsigned +; will match the behavior of synthesis tools. +Explicit = 1 + +; Turn off acceleration of the VITAL packages. Default is to accelerate. +; NoVital = 1 + +; Turn off VITAL compliance checking. Default is checking on. +; NoVitalCheck = 1 + +; Ignore VITAL compliance checking errors. Default is to not ignore. +; IgnoreVitalErrors = 1 + +; Turn off VITAL compliance checking warnings. Default is to show warnings. +; Show_VitalChecksWarnings = 0 + +; Turn off PSL assertion warning messages. Default is to show warnings. +; Show_PslChecksWarnings = 0 + +; Enable parsing of embedded PSL assertions. Default is enabled. +; EmbeddedPsl = 0 + +; Keep silent about case statement static warnings. +; Default is to give a warning. +; NoCaseStaticError = 1 + +; Keep silent about warnings caused by aggregates that are not locally static. +; Default is to give a warning. +; NoOthersStaticError = 1 + +; Treat as errors: +; case statement static warnings +; warnings caused by aggregates that are not locally static +; Overrides NoCaseStaticError, NoOthersStaticError settings. +; PedanticErrors = 1 + +; Turn off inclusion of debugging info within design units. +; Default is to include debugging info. +; NoDebug = 1 + +; Turn off "Loading..." messages. Default is messages on. +; Quiet = 1 + +; Turn on some limited synthesis rule compliance checking. Checks only: +; -- signals used (read) by a process must be in the sensitivity list +; CheckSynthesis = 1 + +; Activate optimizations on expressions that do not involve signals, +; waits, or function/procedure/task invocations. Default is off. +; ScalarOpts = 1 + +; Turns on lint-style checking. +; Show_Lint = 1 + +; Require the user to specify a configuration for all bindings, +; and do not generate a compile time default binding for the +; component. This will result in an elaboration error of +; 'component not bound' if the user fails to do so. Avoids the rare +; issue of a false dependency upon the unused default binding. +; RequireConfigForAllDefaultBinding = 1 + +; Perform default binding at compile time. +; Default is to do default binding at load time. +; BindAtCompile = 1; + +; Inhibit range checking on subscripts of arrays. Range checking on +; scalars defined with subtypes is inhibited by default. +; NoIndexCheck = 1 + +; Inhibit range checks on all (implicit and explicit) assignments to +; scalar objects defined with subtypes. +; NoRangeCheck = 1 + +; Run the 0-in compiler on the VHDL source files +; Default is off. +; ZeroIn = 1 + +; Set the options to be passed to the 0-in compiler. +; Default is "". +; ZeroInOptions = "" + +; Set the synthesis prefix to be honored for synthesis pragma recognition. +; Default is "". +; SynthPrefix = "" + +; Turn on code coverage in VHDL design units. Default is off. +; Coverage = sbceft + +; Turn off code coverage in VHDL subprograms. Default is on. +; CoverageSub = 0 + +; Automatically exclude VHDL case statement OTHERS choice branches. +; This includes OTHERS choices in selected signal assigment statements. +; Default is to not exclude. +; CoverExcludeDefault = 1 + +; Control compiler and VOPT optimizations that are allowed when +; code coverage is on. Refer to the comment for this in the [vlog] area. +; CoverOpt = 3 + +; Inform code coverage optimizations to respect VHDL 'H' and 'L' +; values on signals in conditions and expressions, and to not automatically +; convert them to '1' and '0'. Default is to not convert. +; CoverRespectHandL = 0 + +; Increase or decrease the maximum number of rows allowed in a UDP table +; implementing a VHDL condition coverage or expression coverage expression. +; More rows leads to a longer compile time, but more expressions covered. +; CoverMaxUDPRows = 192 + +; Increase or decrease the maximum number of input patterns that are present +; in FEC table. This leads to a longer compile time with more expressions +; covered with FEC metric. +; CoverMaxFECRows = 192 + +; Enable or disable Focused Expression Coverage analysis for conditions and +; expressions. Focused Expression Coverage data is provided by default when +; expression and/or condition coverage is active. +; CoverFEC = 0 + +; Enable or disable UDP Coverage analysis for conditions and expressions. +; UDP Coverage data is provided by default when expression and/or condition +; coverage is active. +; CoverUDP = 0 + +; Enable or disable short circuit evaluation of conditions and expressions when +; condition or expression coverage is active. Short circuit evaluation is enabled +; by default. +; CoverShortCircuit = 0 + +; Enable code coverage reporting of code that has been optimized away. +; The default is not to report. +; CoverReportCancelled = 1 + +; Use this directory for compiler temporary files instead of "work/_temp" +; CompilerTempDir = /tmp + +; Set this to cause the compilers to force data to be committed to disk +; when the files are closed. +; SyncCompilerFiles = 1 + +; Add VHDL-AMS declarations to package STANDARD +; Default is not to add +; AmsStandard = 1 + +; Range and length checking will be performed on array indices and discrete +; ranges, and when violations are found within subprograms, errors will be +; reported. Default is to issue warnings for violations, because subprograms +; may not be invoked. +; NoDeferSubpgmCheck = 0 + +; Turn ON detection of FSMs having single bit current state variable. +; FsmSingle = 1 + +; Turn off reset state transitions in FSM. +; FsmResetTrans = 0 + +; Turn ON detection of FSM Implicit Transitions. +; FsmImplicitTrans = 1 + +; Do not show immediate assertions with constant expressions in +; GUI/report/UCDB etc. By default immediate assertions with constant +; expressions are shown in GUI/report/UCDB etc. This does not affect ; +; evaluation of immediate assertions. +; ShowConstantImmediateAsserts = 0 + +[vlog] +; Turn off inclusion of debugging info within design units. +; Default is to include debugging info. +; NoDebug = 1 + +; Turn on `protect compiler directive processing. +; Default is to ignore `protect directives. +; Protect = 1 + +; Turn off "Loading..." messages. Default is messages on. +; Quiet = 1 + +; Turn on Verilog hazard checking (order-dependent accessing of global vars). +; Default is off. +; Hazard = 1 + +; Turn on converting regular Verilog identifiers to uppercase. Allows case +; insensitivity for module names. Default is no conversion. +; UpCase = 1 + +; Activate optimizations on expressions that do not involve signals, +; waits, or function/procedure/task invocations. Default is off. +; ScalarOpts = 1 + +; Turns on lint-style checking. +; Show_Lint = 1 + +; Show source line containing error. Default is off. +; Show_source = 1 + +; Turn on bad option warning. Default is off. +; Show_BadOptionWarning = 1 + +; Revert back to IEEE 1364-1995 syntax, default is 0 (off). +; vlog95compat = 1 + +; Turn off PSL warning messages. Default is to show warnings. +; Show_PslChecksWarnings = 0 + +; Enable parsing of embedded PSL assertions. Default is enabled. +; EmbeddedPsl = 0 + +; Set the threshold for automatically identifying sparse Verilog memories. +; A memory with depth equal to or more than the sparse memory threshold gets +; marked as sparse automatically, unless specified otherwise in source code +; or by +nosparse commandline option of vlog or vopt. +; The default is 1M. (i.e. memories with depth equal +; to or greater than 1M are marked as sparse) +; SparseMemThreshold = 1048576 + +; Run the 0-in compiler on the Verilog source files +; Default is off. +; ZeroIn = 1 + +; Set the options to be passed to the 0-in compiler. +; Default is "". +; ZeroInOptions = "" + +; Set the synthesis prefix to be honored for synthesis pragma recognition. +; Default is "". +; SynthPrefix = "" + +; Set the option to treat all files specified in a vlog invocation as a +; single compilation unit. The default value is set to 0 which will treat +; each file as a separate compilation unit as specified in the P1800 draft standard. +; MultiFileCompilationUnit = 1 + +; Turn on code coverage in Verilog design units. Default is off. +; Coverage = sbceft + +; Automatically exclude Verilog case statement default branches. +; Default is to not automatically exclude defaults. +; CoverExcludeDefault = 1 + +; Increase or decrease the maximum number of rows allowed in a UDP table +; implementing a Verilog condition coverage or expression coverage expression. +; More rows leads to a longer compile time, but more expressions covered. +; CoverMaxUDPRows = 192 + +; Increase or decrease the maximum number of input patterns that are present +; in FEC table. This leads to a longer compile time with more expressions +; covered with FEC metric. +; CoverMaxFECRows = 192 + +; Enable or disable Focused Expression Coverage analysis for conditions and +; expressions. Focused Expression Coverage data is provided by default when +; expression and/or condition coverage is active. +; CoverFEC = 0 + +; Enable or disable UDP Coverage analysis for conditions and expressions. +; UDP Coverage data is provided by default when expression and/or condition +; coverage is active. +; CoverUDP = 0 + +; Enable or disable short circuit evaluation of conditions and expressions when +; condition or expression coverage is active. Short circuit evaluation is enabled +; by default. +; CoverShortCircuit = 0 + + +; Turn on code coverage in VLOG `celldefine modules and modules included +; using vlog -v and -y. Default is off. +; CoverCells = 1 + +; Enable code coverage reporting of code that has been optimized away. +; The default is not to report. +; CoverReportCancelled = 1 + +; Control compiler and VOPT optimizations that are allowed when +; code coverage is on. This is a number from 1 to 4, with the following +; meanings (the default is 3): +; 1 -- Turn off all optimizations that affect coverage reports. +; 2 -- Allow optimizations that allow large performance improvements +; by invoking sequential processes only when the data changes. +; This may make major reductions in coverage counts. +; 3 -- In addition, allow optimizations that may change expressions or +; remove some statements. Allow constant propagation. Allow VHDL +; subprogram inlining and VHDL FF recognition. +; 4 -- In addition, allow optimizations that may remove major regions of +; code by changing assignments to built-ins or removing unused +; signals. Change Verilog gates to continuous assignments. +; CoverOpt = 3 + +; Specify the override for the default value of "cross_num_print_missing" +; option for the Cross in Covergroups. If not specified then LRM default +; value of 0 (zero) is used. This is a compile time option. +; SVCrossNumPrintMissingDefault = 0 + +; Setting following to 1 would cause creation of variables which +; would represent the value of Coverpoint expressions. This is used +; in conjunction with "SVCoverpointExprVariablePrefix" option +; in the modelsim.ini +; EnableSVCoverpointExprVariable = 0 + +; Specify the override for the prefix used in forming the variable names +; which represent the Coverpoint expressions. This is used in conjunction with +; "EnableSVCoverpointExprVariable" option of the modelsim.ini +; The default prefix is "expr". +; The variable name is +; variable name => _ +; SVCoverpointExprVariablePrefix = expr + +; Override for the default value of the SystemVerilog covergroup, +; coverpoint, and cross option.goal (defined to be 100 in the LRM). +; NOTE: It does not override specific assignments in SystemVerilog +; source code. NOTE: The modelsim.ini variable "SVCovergroupGoal" +; in the [vsim] section can override this value. +; SVCovergroupGoalDefault = 100 + +; Override for the default value of the SystemVerilog covergroup, +; coverpoint, and cross type_option.goal (defined to be 100 in the LRM) +; NOTE: It does not override specific assignments in SystemVerilog +; source code. NOTE: The modelsim.ini variable "SVCovergroupTypeGoal" +; in the [vsim] section can override this value. +; SVCovergroupTypeGoalDefault = 100 + +; Specify the override for the default value of "strobe" option for the +; Covergroup Type. This is a compile time option which forces "strobe" to +; a user specified default value and supersedes SystemVerilog specified +; default value of '0'(zero). NOTE: This can be overriden by a runtime +; modelsim.ini variable "SVCovergroupStrobe" in the [vsim] section. +; SVCovergroupStrobeDefault = 0 + +; Specify the override for the default value of "merge_instances" option for +; the Covergroup Type. This is a compile time option which forces +; "merge_instances" to a user specified default value and supersedes +; SystemVerilog specified default value of '0'(zero). +; SVCovergroupMergeInstancesDefault = 0 + +; Specify the override for the default value of "per_instance" option for the +; Covergroup variables. This is a compile time option which forces "per_instance" +; to a user specified default value and supersedes SystemVerilog specified +; default value of '0'(zero). +; SVCovergroupPerInstanceDefault = 0 + +; Specify the override for the default value of "get_inst_coverage" option for the +; Covergroup variables. This is a compile time option which forces +; "get_inst_coverage" to a user specified default value and supersedes +; SystemVerilog specified default value of '0'(zero). +; SVCovergroupGetInstCoverageDefault = 0 + +; +; A space separated list of resource libraries that contain precompiled +; packages. The behavior is identical to using the "-L" switch. +; +; LibrarySearchPath = [ ...] +LibrarySearchPath = mtiAvm mtiOvm mtiUPF + +; The behavior is identical to the "-mixedansiports" switch. Default is off. +; MixedAnsiPorts = 1 + +; Enable SystemVerilog 3.1a $typeof() function. Default is off. +; EnableTypeOf = 1 + +; Only allow lower case pragmas. Default is disabled. +; AcceptLowerCasePragmaOnly = 1 + +; Set the maximum depth permitted for a recursive include file nesting. +; IncludeRecursionDepthMax = 5 + +; Turn ON detection of FSMs having single bit current state variable. +; FsmSingle = 1 + +; Turn off reset state transitions in FSM. +; FsmResetTrans = 0 + +; Turn off detections of FSMs having x-assignment. +; FsmXAssign = 0 + +; Turn ON detection of FSM Implicit Transitions. +; FsmImplicitTrans = 1 + +; List of file suffixes which will be read as SystemVerilog. White space +; in extensions can be specified with a back-slash: "\ ". Back-slashes +; can be specified with two consecutive back-slashes: "\\"; +; SVFileExtensions = sv svp svh + +; This setting is the same as the vlog -sv command line switch. +; Enables SystemVerilog features and keywords when true (1). +; When false (0), the rules of IEEE Std 1364-2001 are followed and +; SystemVerilog keywords are ignored. +; Svlog = 0 + +; Prints attribute placed upon SV packages during package import +; when true (1). The attribute will be ignored when this +; entry is false (0). The attribute name is "package_load_message". +; The value of this attribute is a string literal. +; Default is true (1). +; PrintSVPackageLoadingAttribute = 1 + +; Do not show immediate assertions with constant expressions in +; GUI/reports/UCDB etc. By default immediate assertions with constant +; expressions are shown in GUI/reports/UCDB etc. This does not affect +; evaluation of immediate assertions. +; ShowConstantImmediateAsserts = 0 + +; Controls if untyped parameters that are initialized with values greater +; than 2147483647 are mapped to generics of type INTEGER or ignored. +; If mapped to VHDL Integers, values greater than 2147483647 +; are mapped to negative values. +; Default is to map these parameter to generic of type INTEGER +; ForceUnsignedToVHDLInteger = 1 + +; Enable AMS wreal (wired real) extensions. Default is 0. +; WrealType = 1 + +[sccom] +; Enable use of SCV include files and library. Default is off. +; UseScv = 1 + +; Add C++ compiler options to the sccom command line by using this variable. +; CppOptions = -g + +; Use custom C++ compiler located at this path rather than the default path. +; The path should point directly at a compiler executable. +; CppPath = /usr/bin/g++ + +; Enable verbose messages from sccom. Default is off. +; SccomVerbose = 1 + +; sccom logfile. Default is no logfile. +; SccomLogfile = sccom.log + +; Enable use of SC_MS include files and library. Default is off. +; UseScMs = 1 + +[vopt] +; Turn on code coverage in vopt. Default is off. +; Coverage = sbceft + +; Control compiler optimizations that are allowed when +; code coverage is on. Refer to the comment for this in the [vlog] area. +; CoverOpt = 3 + +; Increase or decrease the maximum number of rows allowed in a UDP table +; implementing a vopt condition coverage or expression coverage expression. +; More rows leads to a longer compile time, but more expressions covered. +; CoverMaxUDPRows = 192 + +; Increase or decrease the maximum number of input patterns that are present +; in FEC table. This leads to a longer compile time with more expressions +; covered with FEC metric. +; CoverMaxFECRows = 192 + +; Enable code coverage reporting of code that has been optimized away. +; The default is not to report. +; CoverReportCancelled = 1 + +; Do not show immediate assertions with constant expressions in +; GUI/reports/UCDB etc. By default immediate assertions with constant +; expressions are shown in GUI/reports/UCDB etc. This does not affect +; evaluation of immediate assertions. +; ShowConstantImmediateAsserts = 0 + +; Set the maximum number of iterations permitted for a generate loop. +; Restricting this permits the implementation to recognize infinite +; generate loops. +; GenerateLoopIterationMax = 100000 + +; Set the maximum depth permitted for a recursive generate instantiation. +; Restricting this permits the implementation to recognize infinite +; recursions. +; GenerateRecursionDepthMax = 200 + + +[vsim] +; vopt flow +; Set to turn on automatic optimization of a design. +; Default is on +VoptFlow = 1 + +; vopt automatic SDF +; If automatic design optimization is on, enables automatic compilation +; of SDF files. +; Default is on, uncomment to turn off. +; VoptAutoSDFCompile = 0 + +; Automatic SDF compilation +; Disables automatic compilation of SDF files in flows that support it. +; Default is on, uncomment to turn off. +; NoAutoSDFCompile = 1 + +; Simulator resolution +; Set to fs, ps, ns, us, ms, or sec with optional prefix of 1, 10, or 100. +Resolution = ns + +; Disable certain code coverage exclusions automatically. +; Assertions and FSM are exluded from the code coverage by default +; Set AutoExclusionsDisable = fsm to enable code coverage for fsm +; Set AutoExclusionsDisable = assertions to enable code coverage for assertions +; Set AutoExclusionsDisable = all to enable code coverage for all the automatic exclusions +; Or specify comma or space separated list +;AutoExclusionsDisable = fsm,assertions + +; User time unit for run commands +; Set to default, fs, ps, ns, us, ms, or sec. The default is to use the +; unit specified for Resolution. For example, if Resolution is 100ps, +; then UserTimeUnit defaults to ps. +; Should generally be set to default. +UserTimeUnit = default + +; Default run length +RunLength = 100 ps + +; Maximum iterations that can be run without advancing simulation time +IterationLimit = 5000 + +; Control PSL and Verilog Assume directives during simulation +; Set SimulateAssumeDirectives = 0 to disable assume being simulated as asserts +; Set SimulateAssumeDirectives = 1 to enable assume simulation as asserts +; SimulateAssumeDirectives = 1 + +; Control the simulation of PSL and SVA +; These switches can be overridden by the vsim command line switches: +; -psl, -nopsl, -sva, -nosva. +; Set SimulatePSL = 0 to disable PSL simulation +; Set SimulatePSL = 1 to enable PSL simulation (default) +; SimulatePSL = 1 +; Set SimulateSVA = 0 to disable SVA simulation +; Set SimulateSVA = 1 to enable concurrent SVA simulation (default) +; SimulateSVA = 1 + +; Directives to license manager can be set either as single value or as +; space separated multi-values: +; vhdl Immediately reserve a VHDL license +; vlog Immediately reserve a Verilog license +; plus Immediately reserve a VHDL and Verilog license +; noqueue Do not wait in the license queue when a license is not available +; viewsim Try for viewer license but accept simulator license(s) instead +; of queuing for viewer license (PE ONLY) +; noviewer Disable checkout of msimviewer and vsim-viewer license +; features (PE ONLY) +; noslvhdl Disable checkout of qhsimvh and vsim license features +; noslvlog Disable checkout of qhsimvl and vsimvlog license features +; nomix Disable checkout of msimhdlmix and hdlmix license features +; nolnl Disable checkout of msimhdlsim and hdlsim license features +; mixedonly Disable checkout of qhsimvh,qhsimvl,vsim,vsimvlog license +; features +; lnlonly Disable checkout of qhsimvh,qhsimvl,vsim,vsimvlog,msimhdlmix, +; hdlmix license features +; Single value: +; License = plus +; Multi-value: +; License = noqueue plus + +; Stop the simulator after a VHDL assertion message. +; Or stop the simulator after SystemVerilog severity system task. +; The severity of VHDL assertion or severity system task +; should be higher or equal. +; 0 = Note 1 = Warning 2 = Error 3 = Failure 4 = Fatal +BreakOnAssertion = 3 + +; VHDL assertion Message Format +; %S - Severity Level +; %R - Report Message +; %T - Time of assertion +; %D - Delta +; %I - Instance or Region pathname (if available) +; %i - Instance pathname with process +; %O - Process name +; %K - Kind of object path is to return: Instance, Signal, Process or Unknown +; %P - Instance or Region path without leaf process +; %F - File +; %L - Line number of assertion or, if assertion is in a subprogram, line +; from which the call is made +; %% - Print '%' character +; If specific format for assertion level is defined, use its format. +; If specific format is not defined for assertion level: +; - and if failure occurs during elaboration, use MessageFormatBreakLine; +; - and if assertion triggers a breakpoint (controlled by BreakOnAssertion +; level), use MessageFormatBreak; +; - otherwise, use MessageFormat. +; MessageFormatBreakLine = "** %S: %R\n Time: %T Iteration: %D %K: %i File: %F Line: %L\n" +; MessageFormatBreak = "** %S: %R\n Time: %T Iteration: %D %K: %i File: %F\n" +; MessageFormat = "** %S: %R\n Time: %T Iteration: %D%I\n" +; MessageFormatNote = "** %S: %R\n Time: %T Iteration: %D%I\n" +; MessageFormatWarning = "** %S: %R\n Time: %T Iteration: %D%I\n" +; MessageFormatError = "** %S: %R\n Time: %T Iteration: %D %K: %i File: %F\n" +; MessageFormatFail = "** %S: %R\n Time: %T Iteration: %D %K: %i File: %F\n" +; MessageFormatFatal = "** %S: %R\n Time: %T Iteration: %D %K: %i File: %F\n" + +; Error File - alternate file for storing error messages +; ErrorFile = error.log + + +; Simulation Breakpoint messages +; This flag controls the display of function names when reporting the location +; where the simulator stops do to a breakpoint or fatal error. +; Example w/function name: # Break in Process ctr at counter.vhd line 44 +; Example wo/function name: # Break at counter.vhd line 44 +ShowFunctions = 1 + +; Default radix for all windows and commands. +; Set to symbolic, ascii, binary, octal, decimal, hex, unsigned +DefaultRadix = symbolic + +; VSIM Startup command +; Startup = do startup.do + +; VSIM Shutdown file +; Filename to save u/i formats and configurations. +; ShutdownFile = restart.do +; To explicitly disable auto save: +; ShutdownFile = --disable-auto-save + +; File for saving command transcript +TranscriptFile = transcript + +; File for saving command history +; CommandHistory = cmdhist.log + +; Specify whether paths in simulator commands should be described +; in VHDL or Verilog format. +; For VHDL, PathSeparator = / +; For Verilog, PathSeparator = . +; Must not be the same character as DatasetSeparator. +PathSeparator = / + +; Specify the dataset separator for fully rooted contexts. +; The default is ':'. For example: sim:/top +; Must not be the same character as PathSeparator. +DatasetSeparator = : + +; Specify a unique path separator for the Signal Spy set of functions. +; The default will be to use the PathSeparator variable. +; Must not be the same character as DatasetSeparator. +; SignalSpyPathSeparator = / + +; Used to control parsing of HDL identifiers input to the tool. +; This includes CLI commands, vsim/vopt/vlog/vcom options, +; string arguments to FLI/VPI/DPI calls, etc. +; If set to 1, accept either Verilog escaped Id syntax or +; VHDL extended id syntax, regardless of source language. +; If set to 0, the syntax of the source language must be used. +; Each identifier in a hierarchical name may need different syntax, +; e.g. "/top/\vhdl*ext*id\/middle/\vlog*ext*id /bottom" or +; "top.\vhdl*ext*id\.middle.\vlog*ext*id .bottom" +; GenerousIdentifierParsing = 1 + +; Disable VHDL assertion messages +; IgnoreNote = 1 +; IgnoreWarning = 1 +; IgnoreError = 1 +; IgnoreFailure = 1 + +; Disable SystemVerilog assertion messages +; IgnoreSVAInfo = 1 +; IgnoreSVAWarning = 1 +; IgnoreSVAError = 1 +; IgnoreSVAFatal = 1 + +; Do not print any additional information from Severity System tasks. +; Only the message provided by the user is printed along with severity +; information. +; SVAPrintOnlyUserMessage = 1; + +; Default force kind. May be freeze, drive, deposit, or default +; or in other terms, fixed, wired, or charged. +; A value of "default" will use the signal kind to determine the +; force kind, drive for resolved signals, freeze for unresolved signals +; DefaultForceKind = freeze + +; Control the iteration of events when a VHDL signal is forced to a value +; This flag can be set to honour the signal update event in next iteration, +; the default is to update and propagate in the same iteration. +; ForceSigNextIter = 1 + + +; If zero, open files when elaborated; otherwise, open files on +; first read or write. Default is 0. +; DelayFileOpen = 1 + +; Control VHDL files opened for write. +; 0 = Buffered, 1 = Unbuffered +UnbufferedOutput = 0 + +; Control the number of VHDL files open concurrently. +; This number should always be less than the current ulimit +; setting for max file descriptors. +; 0 = unlimited +ConcurrentFileLimit = 40 + +; Control the number of hierarchical regions displayed as +; part of a signal name shown in the Wave window. +; A value of zero tells VSIM to display the full name. +; The default is 0. +; WaveSignalNameWidth = 0 + +; Turn off warnings when changing VHDL constants and generics +; Default is 1 to generate warning messages +; WarnConstantChange = 0 + +; Turn off warnings from accelerated versions of the std_logic_arith, +; std_logic_unsigned, and std_logic_signed packages. +; StdArithNoWarnings = 1 + +; Turn off warnings from accelerated versions of the IEEE numeric_std +; and numeric_bit packages. +; NumericStdNoWarnings = 1 + +; Use old-style (pre-6.6) VHDL FOR generate statement iteration names +; in the design hierarchy. +; This style is controlled by the value of the GenerateFormat +; value described next. Default is to use new-style names, which +; comprise the generate statement label, '(', the value of the generate +; parameter, and a closing ')'. +; Uncomment this to use old-style names. +; OldVhdlForGenNames = 1 + +; Control the format of the old-style VHDL FOR generate statement region +; name for each iteration. Do not quote it. +; The format string here must contain the conversion codes %s and %d, +; in that order, and no other conversion codes. The %s represents +; the generate statement label; the %d represents the generate parameter value +; at a particular iteration (this is the position number if the generate parameter +; is of an enumeration type). Embedded whitespace is allowed (but discouraged); +; leading and trailing whitespace is ignored. +; Application of the format must result in a unique region name over all +; loop iterations for a particular immediately enclosing scope so that name +; lookup can function properly. The default is %s__%d. +; GenerateFormat = %s__%d + +; Specify whether checkpoint files should be compressed. +; The default is 1 (compressed). +; CheckpointCompressMode = 0 + +; Specify gcc compiler used in the compilation of automatically generated DPI exportwrapper. +; Use custom gcc compiler located at this path rather than the default path. +; The path should point directly at a compiler executable. +; DpiCppPath = /bin/gcc + +; Specify whether to enable SystemVerilog DPI "out-of-the-blue" calls. +; The term "out-of-the-blue" refers to SystemVerilog export function calls +; made from C functions that don't have the proper context setup +; (as is the case when running under "DPI-C" import functions). +; When this is enabled, one can call a DPI export function +; (but not task) from any C code. +; the setting of this variable can be one of the following values: +; 0 : dpioutoftheblue call is disabled (default) +; 1 : dpioutoftheblue call is enabled, but export call debug support is not available. +; 2 : dpioutoftheblue call is enabled, and limited export call debug support is available. +; DpiOutOfTheBlue = 1 + +; Specify whether continuous assignments are run before other normal priority +; processes scheduled in the same iteration. This event ordering minimizes race +; differences between optimized and non-optimized designs, and is the default +; behavior beginning with the 6.5 release. For pre-6.5 event ordering, set +; ImmediateContinuousAssign to 0. +; The default is 1 (enabled). +; ImmediateContinuousAssign = 0 + +; List of dynamically loaded objects for Verilog PLI applications +; Veriuser = veriuser.sl + +; Which default VPI object model should the tool conform to? +; The 1364 modes are Verilog-only, for backwards compatibility with older +; libraries, and SystemVerilog objects are not available in these modes. +; +; In the absence of a user-specified default, the tool default is the +; latest available LRM behavior. +; Options for PliCompatDefault are: +; VPI_COMPATIBILITY_VERSION_1364v1995 +; VPI_COMPATIBILITY_VERSION_1364v2001 +; VPI_COMPATIBILITY_VERSION_1364v2005 +; VPI_COMPATIBILITY_VERSION_1800v2005 +; VPI_COMPATIBILITY_VERSION_1800v2008 +; +; Synonyms for each string are also recognized: +; VPI_COMPATIBILITY_VERSION_1364v1995 (1995, 95, 1364v1995, 1364V1995, VL1995) +; VPI_COMPATIBILITY_VERSION_1364v2001 (2001, 01, 1364v2001, 1364V2001, VL2001) +; VPI_COMPATIBILITY_VERSION_1364v2005 (1364v2005, 1364V2005, VL2005) +; VPI_COMPATIBILITY_VERSION_1800v2005 (2005, 05, 1800v2005, 1800V2005, SV2005) +; VPI_COMPATIBILITY_VERSION_1800v2008 (2008, 08, 1800v2008, 1800V2008, SV2008) + + +; PliCompatDefault = VPI_COMPATIBILITY_VERSION_1800v2005 + +; Specify default options for the restart command. Options can be one +; or more of: -force -nobreakpoint -nolist -nolog -nowave -noassertions +; DefaultRestartOptions = -force + +; Turn on (1) or off (0) WLF file compression. +; The default is 1 (compress WLF file). +; WLFCompress = 0 + +; Specify whether to save all design hierarchy (1) in the WLF file +; or only regions containing logged signals (0). +; The default is 0 (save only regions with logged signals). +; WLFSaveAllRegions = 1 + +; WLF file time limit. Limit WLF file by time, as closely as possible, +; to the specified amount of simulation time. When the limit is exceeded +; the earliest times get truncated from the file. +; If both time and size limits are specified the most restrictive is used. +; UserTimeUnits are used if time units are not specified. +; The default is 0 (no limit). Example: WLFTimeLimit = {100 ms} +; WLFTimeLimit = 0 + +; WLF file size limit. Limit WLF file size, as closely as possible, +; to the specified number of megabytes. If both time and size limits +; are specified then the most restrictive is used. +; The default is 0 (no limit). +; WLFSizeLimit = 1000 + +; Specify whether or not a WLF file should be deleted when the +; simulation ends. A value of 1 will cause the WLF file to be deleted. +; The default is 0 (do not delete WLF file when simulation ends). +; WLFDeleteOnQuit = 1 + +; Specify whether or not a WLF file should be indexed during +; simulation. If set to 0, the WLF file will not be indexed. +; The default is 1, indexed the WLF file. +; WLFIndex = 0 + +; Specify whether or not a WLF file should be optimized during +; simulation. If set to 0, the WLF file will not be optimized. +; The default is 1, optimize the WLF file. +; WLFOptimize = 0 + +; Specify the name of the WLF file. +; The default is vsim.wlf +; WLFFilename = vsim.wlf + +; Specify whether to lock the WLF file using system lockd locking mechanism. +; Locking the file prevents other invocations of ModelSim/Questa tools from +; inadvertently overwriting the WLF file. +; The default is 1, lock the WLF file. +; WLFFileLock = 0 + +; Specify the WLF reader cache size limit for each open WLF file. +; The size is giving in megabytes. A value of 0 turns off the +; WLF cache. +; WLFSimCacheSize allows a different cache size to be set for +; simulation WLF file independent of post-simulation WLF file +; viewing. If WLFSimCacheSize is not set it defaults to the +; WLFCacheSize setting. +; The default WLFCacheSize setting is enabled to 256M per open WLF file. +; WLFCacheSize = 2000 +; WLFSimCacheSize = 500 + +; Specify the WLF file event collapse mode. +; 0 = Preserve all events and event order. (same as -wlfnocollapse) +; 1 = Only record values of logged objects at the end of a simulator iteration. +; (same as -wlfcollapsedelta) +; 2 = Only record values of logged objects at the end of a simulator time step. +; (same as -wlfcollapsetime) +; The default is 1. +; WLFCollapseMode = 0 + +; Specify whether WLF file logging can use threads on multi-processor machines +; if 0, no threads will be used, if 1, threads will be used if the system has +; more than one processor +; WLFUseThreads = 1 + +; Turn on/off undebuggable SystemC type warnings. Default is on. +; ShowUndebuggableScTypeWarning = 0 + +; Turn on/off unassociated SystemC name warnings. Default is off. +; ShowUnassociatedScNameWarning = 1 + +; Turn on/off SystemC IEEE 1666 deprecation warnings. Default is off. +; ScShowIeeeDeprecationWarnings = 1 + +; Turn on/off the check for multiple drivers on a SystemC sc_signal. Default is off. +; ScEnableScSignalWriteCheck = 1 + +; Set SystemC default time unit. +; Set to fs, ps, ns, us, ms, or sec with optional +; prefix of 1, 10, or 100. The default is 1 ns. +; The ScTimeUnit value is honored if it is coarser than Resolution. +; If ScTimeUnit is finer than Resolution, it is set to the value +; of Resolution. For example, if Resolution is 100ps and ScTimeUnit is ns, +; then the default time unit will be 1 ns. However if Resolution +; is 10 ns and ScTimeUnit is ns, then the default time unit will be 10 ns. +ScTimeUnit = ns + +; Set SystemC sc_main stack size. The stack size is set as an integer +; number followed by the unit which can be Kb(Kilo-byte), Mb(Mega-byte) or +; Gb(Giga-byte). Default is 10 Mb. The stack size for sc_main depends +; on the amount of data on the sc_main() stack and the memory required +; to succesfully execute the longest function call chain of sc_main(). +ScMainStackSize = 10 Mb + +; Turn on/off execution of remainder of sc_main upon quitting the current +; simulation session. If the cumulative length of sc_main() in terms of +; simulation time units is less than the length of the current simulation +; run upon quit or restart, sc_main() will be in the middle of execution. +; This switch gives the option to execute the remainder of sc_main upon +; quitting simulation. The drawback of not running sc_main till the end +; is memory leaks for objects created by sc_main. If on, the remainder of +; sc_main will be executed ignoring all delays. This may cause the simulator +; to crash if the code in sc_main is dependent on some simulation state. +; Default is on. +ScMainFinishOnQuit = 1 + +; Set the SCV relationship name that will be used to identify phase +; relations. If the name given to a transactor relation matches this +; name, the transactions involved will be treated as phase transactions +ScvPhaseRelationName = mti_phase + +; Customize the vsim kernel shutdown behavior at the end of the simulation. +; Some common causes of the end of simulation are $finish (implicit or explicit), +; sc_stop(), tf_dofinish(), and assertion failures. +; This should be set to "ask", "exit", or "stop". The default is "ask". +; "ask" -- In batch mode, the vsim kernel will abruptly exit. +; In GUI mode, a dialog box will pop up and ask for user confirmation +; whether or not to quit the simulation. +; "stop" -- Cause the simulation to stay loaded in memory. This can make some +; post-simulation tasks easier. +; "exit" -- The simulation will abruptly exit without asking for any confirmation. +; "final" -- Run SystemVerilog final blocks then behave as "stop". +; Note: This variable can be overridden with the vsim "-onfinish" command line switch. +OnFinish = ask + +; Print pending deferred assertion messages. +; Deferred assertion messages may be scheduled after the $finish in the same +; time step. Deferred assertions scheduled to print after the $finish are +; printed before exiting with severity level NOTE since it's not known whether +; the assertion is still valid due to being printed in the active region +; instead of the reactive region where they are normally printed. +; OnFinishPendingAssert = 1; + +; Print "simstats" result at the end of simulation before shutdown. +; If this is enabled, the simstats result will be printed out before shutdown. +; The default is off. +; PrintSimStats = 1 + +; Assertion File - alternate file for storing VHDL/PSL/Verilog assertion messages +; AssertFile = assert.log + +; Run simulator in assertion debug mode. Default is off. +; AssertionDebug = 1 + +; Turn on/off PSL/SVA/VHDL assertion enable. Default is on. +; AssertionEnable = 0 + +; Set PSL/SVA/VHDL concurrent assertion fail limit. Default is -1. +; Any positive integer, -1 for infinity. +; AssertionLimit = 1 + +; Turn on/off PSL concurrent assertion pass log. Default is off. +; The flag does not affect SVA +; AssertionPassLog = 1 + +; Turn on/off PSL concurrent assertion fail log. Default is on. +; The flag does not affect SVA +; AssertionFailLog = 0 + +; Turn on/off SVA concurrent assertion local var printing in -assertdebug mode. Default is on. +; AssertionFailLocalVarLog = 0 + +; Set action type for PSL/SVA concurrent assertion fail action. Default is continue. +; 0 = Continue 1 = Break 2 = Exit +; AssertionFailAction = 1 + +; Enable the active thread monitor in the waveform display when assertion debug is enabled. +; AssertionActiveThreadMonitor = 1 + +; Control how many waveform rows will be used for displaying the active threads. Default is 5. +; AssertionActiveThreadMonitorLimit = 5 + +; Assertion thread limit after which assertion would be killed/switched off. +; The default is -1 (unlimited). If the number of threads for an assertion go +; beyond this limit, the assertion would be either switched off or killed. This +; limit applies to only assert directives. +;AssertionThreadLimit = -1 + +; Action to be taken once the assertion thread limit is reached. Default +; is kill. It can have a value of off or kill. In case of kill, all the existing +; threads are terminated and no new attempts are started. In case of off, the +; existing attempts keep on evaluating but no new attempts are started. This +; variable applies to only assert directives. +;AssertionThreadLimitAction = kill + +; Cover thread limit after which cover would be killed/switched off. +; The default is -1 (unlimited). If the number of threads for a cover go +; beyond this limit, the cover would be either switched off or killed. This +; limit applies to only cover directives. +;CoverThreadLimit = -1 + +; Action to be taken once the cover thread limit is reached. Default +; is kill. It can have a value of off or kill. In case of kill, all the existing +; threads are terminated and no new attempts are started. In case of off, the +; existing attempts keep on evaluating but no new attempts are started. This +; variable applies to only cover directives. +;CoverThreadLimitAction = kill + + +; By default immediate assertions do not participate in Assertion Coverage calculations +; unless they are executed. This switch causes all immediate assertions in the design +; to participate in Assertion Coverage calculations, whether attempted or not. +; UnattemptedImmediateAssertions = 0 + + + +; As per strict 1850-2005 PSL LRM, an always property can either pass +; or fail. However, by default, Questa reports multiple passes and +; multiple fails on top always/never property (always/never operator +; is the top operator under Verification Directive). The reason +; being that Questa reports passes and fails on per attempt of the +; top always/never property. Use the following flag to instruct +; Questa to strictly follow LRM. With this flag, all assert/never +; directives will start an attempt once at start of simulation. +; The attempt can either fail, match or match vacuously. +; For e.g. if always is the top operator under assert, the always will +; keep on checking the property at every clock. If the property under +; always fails, the directive will be considered failed and no more +; checking will be done for that directive. A top always property, +; if it does not fail, will show a pass at end of simulation. +; The default value is '0' (i.e. zero is off). For example: +; PslOneAttempt = 1 + +; Specify the number of clock ticks to represent infinite clock ticks. +; This affects eventually!, until! and until_!. If at End of Simulation +; (EOS) an active strong-property has not clocked this number of +; clock ticks then neither pass or fail (vacuous match) is returned +; else respective fail/pass is returned. The default value is '0' (zero) +; which effectively does not check for clock tick condition. For example: +; PslInfinityThreshold = 5000 + +; Control how many thread start times will be preserved for ATV viewing for a given assertion +; instance. Default is -1 (ALL). +; ATVStartTimeKeepCount = -1 + +; Turn on/off code coverage +; CodeCoverage = 0 + +; Count all code coverage condition and expression truth table rows that match. +; CoverCountAll = 1 + +; Turn off automatic inclusion of VHDL integers in toggle coverage. Default +; is to include them. +; ToggleNoIntegers = 1 + +; Set the maximum number of values that are collected for toggle coverage of +; VHDL integers. Default is 100; +; ToggleMaxIntValues = 100 + +; Set the maximum number of values that are collected for toggle coverage of +; Verilog real. Default is 100; +; ToggleMaxRealValues = 100 + +; Turn on automatic inclusion of Verilog integers in toggle coverage, except +; for enumeration types. Default is to include them. +; ToggleVlogIntegers = 0 + +; Turn on automatic inclusion of Verilog real type in toggle coverage, except +; for shortreal types. Default is to not include them. +; ToggleVlogReal = 1 + +; Turn on automatic inclusion of Verilog fixed-size unpacked arrays, VHDL multi-d arrays +; and VHDL arrays-of-arrays in toggle coverage. +; Default is to not include them. +; ToggleFixedSizeArray = 1 + +; Increase or decrease the maximum size of Verilog unpacked fixed-size arrays, +; VHDL multi-d arrays and VHDL arrays-of-arrays that are included for toggle coverage. +; This leads to a longer simulation time with bigger arrays covered with toggle coverage. +; Default is 1024. +; ToggleMaxFixedSizeArray = 1024 + +; Treat Verilog multi-dimensional packed vectors and packed structures as equivalently sized +; one-dimensional packed vectors for toggle coverage. Default is 0. +; TogglePackedAsVec = 0 + +; Treat Verilog enumerated types as equivalently sized one-dimensional packed vectors for +; toggle coverage. Default is 0. +; ToggleVlogEnumBits = 0 + +; Limit the widths of registers automatically tracked for toggle coverage. Default is 128. +; For unlimited width, set to 0. +; ToggleWidthLimit = 128 + +; Limit the counts that are tracked for toggle coverage. When all edges for a bit have +; reached this count, further activity on the bit is ignored. Default is 1. +; For unlimited counts, set to 0. +; ToggleCountLimit = 1 + +; Change the mode of extended toggle coverage. Default is 3. Valid modes are 1, 2 and 3. +; Following is the toggle coverage calculation criteria based on extended toggle mode: +; Mode 1: 0L->1H & 1H->0L & any one 'Z' transition (to/from 'Z'). +; Mode 2: 0L->1H & 1H->0L & one transition to 'Z' & one transition from 'Z'. +; Mode 3: 0L->1H & 1H->0L & all 'Z' transitions. +; ExtendedToggleMode = 3 + +; Turn on/off all PSL/SVA cover directive enables. Default is on. +; CoverEnable = 0 + +; Turn on/off PSL/SVA cover log. Default is off "0". +; CoverLog = 1 + +; Set "at_least" value for all PSL/SVA cover directives. Default is 1. +; CoverAtLeast = 2 + +; Set "limit" value for all PSL/SVA cover directives. Default is -1. +; Any positive integer, -1 for infinity. +; CoverLimit = 1 + +; Specify the coverage database filename. +; Default is "" (i.e. database is NOT automatically saved on close). +; UCDBFilename = vsim.ucdb + +; Specify the maximum limit for the number of Cross (bin) products reported +; in XML and UCDB report against a Cross. A warning is issued if the limit +; is crossed. Default is zero. vsim switch -cvgmaxrptrhscross can override this +; setting. +; MaxReportRhsSVCrossProducts = 1000 + +; Specify the override for the "auto_bin_max" option for the Covergroups. +; If not specified then value from Covergroup "option" is used. +; SVCoverpointAutoBinMax = 64 + +; Specify the override for the value of "cross_num_print_missing" +; option for the Cross in Covergroups. If not specified then value +; specified in the "option.cross_num_print_missing" is used. This +; is a runtime option. NOTE: This overrides any "cross_num_print_missing" +; value specified by user in source file and any SVCrossNumPrintMissingDefault +; specified in modelsim.ini. +; SVCrossNumPrintMissing = 0 + +; Specify whether to use the value of "cross_num_print_missing" +; option in report and GUI for the Cross in Covergroups. If not specified then +; cross_num_print_missing is ignored for creating reports and displaying +; covergroups in GUI. Default is 0, which means ignore "cross_num_print_missing". +; UseSVCrossNumPrintMissing = 0 + +; Specify the override for the value of "strobe" option for the +; Covergroup Type. If not specified then value in "type_option.strobe" +; will be used. This is runtime option which forces "strobe" to +; user specified value and supersedes user specified values in the +; SystemVerilog Code. NOTE: This also overrides the compile time +; default value override specified using "SVCovergroupStrobeDefault" +; SVCovergroupStrobe = 0 + +; Override for explicit assignments in source code to "option.goal" of +; SystemVerilog covergroup, coverpoint, and cross. It also overrides the +; default value of "option.goal" (defined to be 100 in the SystemVerilog +; LRM) and the value of modelsim.ini variable "SVCovergroupGoalDefault". +; SVCovergroupGoal = 100 + +; Override for explicit assignments in source code to "type_option.goal" of +; SystemVerilog covergroup, coverpoint, and cross. It also overrides the +; default value of "type_option.goal" (defined to be 100 in the SystemVerilog +; LRM) and the value of modelsim.ini variable "SVCovergroupTypeGoalDefault". +; SVCovergroupTypeGoal = 100 + +; Enforce the 6.3 behavior of covergroup get_coverage() and get_inst_coverage() +; builtin functions, and report. This setting changes the default values of +; option.get_inst_coverage and type_option.merge_instances to ensure the 6.3 +; behavior if explicit assignments are not made on option.get_inst_coverage and +; type_option.merge_instances by the user. There are two vsim command line +; options, -cvg63 and -nocvg63 to override this setting from vsim command line. +; The default value of this variable from release 6.6 onwards is 0. This default +; drives compliance with the clarified behavior in the IEEE 1800-2009 standard. +; SVCovergroup63Compatibility = 0 + +; Enforce the 6.5 default behavior of covergroup get_coverage() builtin +; functions, GUI, and report. This setting changes the default values of +; type_option.merge_instances to ensure the 6.5 default behavior if explicit +; assignments are not made on type_option.merge_instances by the user. +; There are two vsim command line options, -cvgmergeinstances and +; -nocvgmergeinstances to override this setting from vsim command line. +; The default value of this variable from release 6.6 onwards is 0. This default +; drives compliance with the clarified behavior in the IEEE 1800-2009 standard. +; SvCovergroupMergeInstancesDefault = 1 + +; Enable or disable generation of more detailed information about the sampling +; of covergroup, cross, and coverpoints. It provides the details of the number +; of times the covergroup instance and type were sampled, as well as details +; about why covergroup, cross and coverpoint were not covered. A non-zero value +; is to enable this feature. 0 is to disable this feature. Default is 0 +; SVCovergroupSampleInfo = 0 + +; Specify the maximum number of Coverpoint bins in whole design for +; all Covergroups. +; MaxSVCoverpointBinsDesign = 2147483648 + +; Specify maximum number of Coverpoint bins in any instance of a Covergroup +; MaxSVCoverpointBinsInst = 2147483648 + +; Specify the maximum number of Cross bins in whole design for +; all Covergroups. +; MaxSVCrossBinsDesign = 2147483648 + +; Specify maximum number of Cross bins in any instance of a Covergroup +; MaxSVCrossBinsInst = 2147483648 + +; Set weight for all PSL/SVA cover directives. Default is 1. +; CoverWeight = 2 + +; Check vsim plusargs. Default is 0 (off). +; 0 = Don't check plusargs +; 1 = Warning on unrecognized plusarg +; 2 = Error and exit on unrecognized plusarg +; CheckPlusargs = 1 + +; Load the specified shared objects with the RTLD_GLOBAL flag. +; This gives global visibility to all symbols in the shared objects, +; meaning that subsequently loaded shared objects can bind to symbols +; in the global shared objects. The list of shared objects should +; be whitespace delimited. This option is not supported on the +; Windows or AIX platforms. +; GlobalSharedObjectList = example1.so example2.so example3.so + +; Run the 0in tools from within the simulator. +; Default is off. +; ZeroIn = 1 + +; Set the options to be passed to the 0in runtime tool. +; Default value set to "". +; ZeroInOptions = "" + +; Initial seed for the random number generator of the root thread (SystemVerilog). +; NOTE: This variable can be overridden with the vsim "-sv_seed" command line switch. +; The default value is 0. +; Sv_Seed = 0 + +; Specify the solver "engine" that vsim will select for constrained random +; generation. +; Valid values are: +; "auto" - automatically select the best engine for the current +; constraint scenario +; "bdd" - evaluate all constraint scenarios using the BDD solver engine +; "act" - evaluate all constraint scenarios using the ACT solver engine +; While the BDD solver engine is generally efficient with constraint scenarios +; involving bitwise logical relationships, the ACT solver engine can exhibit +; superior performance with constraint scenarios involving large numbers of +; random variables related via arithmetic operators (+, *, etc). +; NOTE: At this time, the "auto" setting is equivalent to the "bdd" setting. +; NOTE: This variable can be overridden with the vsim "-solveengine" command +; line switch. +; The default value is "auto". +; SolveEngine = auto + +; Specify if the solver should attempt to ignore overflow/underflow semantics +; for arithmetic constraints (multiply, addition, subtraction) in order to +; improve performance. The "solveignoreoverflow" attribute can be specified on +; a per-call basis to randomize() to override this setting. +; The default value is 0 (overflow/underflow is not ignored). Set to 1 to +; ignore overflow/underflow. +; SolveIgnoreOverflow = 0 + +; Specifies the maximum size that a dynamic array may be resized to by the +; solver. If the solver attempts to resize a dynamic array to a size greater +; than the specified limit, the solver will abort with an error. +; The default value is 2000. A value of 0 indicates no limit. +; SolveArrayResizeMax = 2000 + +; Error message severity when randomize() failure is detected (SystemVerilog). +; 0 = No error 1 = Warning 2 = Error 3 = Failure 4 = Fatal +; The default is 0 (no error). +; SolveFailSeverity = 0 + +; Enable/disable debug information for randomize() failures. +; NOTE: This variable can be overridden with the vsim "-solvefaildbug" command +; line switch. +; The default is 0 (disabled). Set to 1 to enable. +; SolveFailDebug = 0 + +; Specify the maximum size of the solution graph generated by the BDD solver. +; This value can be used to force the BDD solver to abort the evaluation of a +; complex constraint scenario that cannot be evaluated with finite memory. +; This value is specified in 1000s of nodes. +; The default value is 10000. A value of 0 indicates no limit. +; SolveGraphMaxSize = 10000 + +; Specify the maximum number of evaluations that may be performed on the +; solution graph by the BDD solver. This value can be used to force the BDD +; solver to abort the evaluation of a complex constraint scenario that cannot +; be evaluated in finite time. This value is specified in 10000s of evaluations. +; The default value is 10000. A value of 0 indicates no limit. +; SolveGraphMaxEval = 10000 + +; Specify the maximum number of tests that the ACT solver may evaluate before +; abandoning an attempt to solve a particular constraint scenario. +; The default value is 1000000. A value of 0 indicates no limit. +; SolveACTMaxTests = 1000000 + +; Specify the number of times the ACT solver will retry to evaluate a constraint +; scenario that fails due to the SolveACTMaxTests threshold. +; The default value is 0 (no retry). +; SolveACTRetryCount = 0 + +; SolveSpeculateLevel controls whether or not the solver performs speculation +; during the evaluation of a constraint scenario. +; Speculation is an attempt to partition complex constraint scenarios by +; choosing a 'speculation' subset of the variables and constraints. This +; 'speculation' set is solved independently of the remaining constraints. +; The solver then attempts to solve the remaining variables and constraints +; (the 'dependent' set). If this attempt fails, the solver backs up and +; re-solves the 'speculation' set, then retries the 'dependent' set. +; Valid values are: +; 0 - no speculation +; 1 - enable speculation that maintains LRM specified distribution +; 2 - enable other speculation - may yield non-LRM distribution +; Currently, distribution constraints and solve-before constraints are +; used in selecting the 'speculation' sets for speculation level 1. Non-LRM +; compliant speculation includes random variables in condition expressions. +; The default value is 0. +; SolveSpeculateLevel = 0 + +; By default, when speculation is enabled, the solver first tries to solve a +; constraint scenario *without* speculation. If the solver fails to evaluate +; the constraint scenario (due to time/memory limits) then the solver will +; re-evaluate the constraint scenario with speculation. If SolveSpeculateFirst +; is set to 1, the solver will skip the initial non-speculative attempt to +; evaluate the constraint scenario. (Only applies when SolveSpeculateLevel is +; non-zero) +; The default value is 0. +; SolveSpeculateFirst = 0 + +; Specify the maximum bit width of a variable in a conditional expression that +; may be considered as the basis for "conditional" speculation. (Only applies +; when SolveSpeculateLevel=2) +; The default value is 6. +; SolveSpeculateMaxCondWidth = 6 + +; Specify the maximum number of attempts to solve a speculative set of random +; variables and constraints. Exceeding this limit will cause the solver to +; abandon the current speculative set. (Only applies when SolveSpeculateLevel +; is non-zero) +; The default value is 100. +; SolveSpeculateMaxIterations = 100 + +; Specifies whether to attempt speculation on solve-before constraints or +; distribution constraints first. A value of 0 specifies that solve-before +; constraints are attempted first as the basis for speculative randomization. +; A value of 1 specifies that distribution constraints are attempted first +; as the basis for speculative randomization. +; The default value is 0. +; SolveSpeculateDistFirst = 0 + +; If the non-speculative BDD solver fails to evaluate a constraint scenario +; (due to time/memory limits) then the solver can be instructed to automatically +; re-evaluate the constraint scenario with the ACT solver engine. Set +; SolveACTbeforeSpeculate to 1 to enable this feature. +; The default value is 0 (do not re-evaluate with the ACT solver). +; SolveACTbeforeSpeculate = 0 + +; Use SolveFlags to specify options that will guide the behavior of the +; constraint solver. These options may improve the performance of the +; constraint solver for some testcases, and decrease the performance of the +; constraint solver for others. +; Valid flags are: +; i = disable bit interleaving for >, >=, <, <= constraints (BDD engine) +; n = disable bit interleaving for all constraints (BDD engine) +; r = reverse bit interleaving (BDD engine) +; The default value is "" (no options). +; SolveFlags = + +; Specify random sequence compatiblity with a prior letter release. This +; option is used to get the same random sequences during simulation as +; as a prior letter release. Only prior letter releases (of the current +; number release) are allowed. +; NOTE: Only those random sequence changes due to solver optimizations are +; reverted by this variable. Random sequence changes due to solver bugfixes +; cannot be un-done. +; NOTE: This variable can be overridden with the vsim "-solverev" command +; line switch. +; Default value set to "" (no compatibility). +; SolveRev = + +; Environment variable expansion of command line arguments has been depricated +; in favor shell level expansion. Universal environment variable expansion +; inside -f files is support and continued support for MGC Location Maps provide +; alternative methods for handling flexible pathnames. +; The following line may be uncommented and the value set to 1 to re-enable this +; deprecated behavior. The default value is 0. +; DeprecatedEnvironmentVariableExpansion = 0 + +; Turn on/off collapsing of bus ports in VCD dumpports output +DumpportsCollapse = 1 + +; Location of Multi-Level Verification Component (MVC) installation. +; The default location is the product installation directory. +; MvcHome = $MODEL_TECH/... + +; Initialize SystemVerilog enums using the base type's default value +; instead of the leftmost value. +; EnumBaseInit = 1 + +[lmc] +; The simulator's interface to Logic Modeling's SmartModel SWIFT software +libsm = $MODEL_TECH/libsm.sl +; The simulator's interface to Logic Modeling's SmartModel SWIFT software (Windows NT) +; libsm = $MODEL_TECH/libsm.dll +; Logic Modeling's SmartModel SWIFT software (HP 9000 Series 700) +; libswift = $LMC_HOME/lib/hp700.lib/libswift.sl +; Logic Modeling's SmartModel SWIFT software (IBM RISC System/6000) +; libswift = $LMC_HOME/lib/ibmrs.lib/swift.o +; Logic Modeling's SmartModel SWIFT software (Sun4 Solaris) +; libswift = $LMC_HOME/lib/sun4Solaris.lib/libswift.so +; Logic Modeling's SmartModel SWIFT software (Windows NT) +; libswift = $LMC_HOME/lib/pcnt.lib/libswift.dll +; Logic Modeling's SmartModel SWIFT software (non-Enterprise versions of Linux) +; libswift = $LMC_HOME/lib/x86_linux.lib/libswift.so +; Logic Modeling's SmartModel SWIFT software (Enterprise versions of Linux) +; libswift = $LMC_HOME/lib/linux.lib/libswift.so + +; The simulator's interface to Logic Modeling's hardware modeler SFI software +libhm = $MODEL_TECH/libhm.sl +; The simulator's interface to Logic Modeling's hardware modeler SFI software (Windows NT) +; libhm = $MODEL_TECH/libhm.dll +; Logic Modeling's hardware modeler SFI software (HP 9000 Series 700) +; libsfi = /lib/hp700/libsfi.sl +; Logic Modeling's hardware modeler SFI software (IBM RISC System/6000) +; libsfi = /lib/rs6000/libsfi.a +; Logic Modeling's hardware modeler SFI software (Sun4 Solaris) +; libsfi = /lib/sun4.solaris/libsfi.so +; Logic Modeling's hardware modeler SFI software (Windows NT) +; libsfi = /lib/pcnt/lm_sfi.dll +; Logic Modeling's hardware modeler SFI software (Linux) +; libsfi = /lib/linux/libsfi.so + +[msg_system] +; Change a message severity or suppress a message. +; The format is: = [,...] +; suppress can be used to achieve +nowarn functionality +; The format is: suppress = ,,[,,...] +; Examples: +; note = 3009 +; warning = 3033 +; error = 3010,3016 +; fatal = 3016,3033 +; suppress = 3009,3016,3043 +; suppress = 3009,CNNODP,3043,TFMPC +; suppress = 8683,8684 +; The command verror can be used to get the complete +; description of a message. + +; Control transcripting of Verilog display system task messages and +; PLI/FLI print function call messages. The system tasks include +; $display[bho], $strobe[bho], Smonitor{bho], and $write[bho]. They +; also include the analogous file I/O tasks that write to STDOUT +; (i.e. $fwrite or $fdisplay). The PLI/FLI calls include io_printf, +; vpi_printf, mti_PrintMessage, and mti_PrintFormatted. The default +; is to have messages appear only in the transcript. The other +; settings are to send messages to the wlf file only (messages that +; are recorded in the wlf file can be viewed in the MsgViewer) or +; to both the transcript and the wlf file. The valid values are +; tran {transcript only (default)} +; wlf {wlf file only} +; both {transcript and wlf file} +; displaymsgmode = tran + +; Control transcripting of elaboration/runtime messages not +; addressed by the displaymsgmode setting. The default is to +; have messages appear in the transcript and recorded in the wlf +; file (messages that are recorded in the wlf file can be viewed +; in the MsgViewer). The other settings are to send messages +; only to the transcript or only to the wlf file. The valid +; values are +; both {default} +; tran {transcript only} +; wlf {wlf file only} +; msgmode = both +[Project] +; Warning -- Do not edit the project properties directly. +; Property names are dynamic in nature and property +; values have special syntax. Changing property data directly +; can result in a corrupt MPF file. All project properties +; can be modified through project window dialogs. +Project_Version = 6 +Project_DefaultLib = work +Project_SortMethod = unused +Project_Files_Count = 2 +Project_File_0 = C:/qaz/projects/libs/hdl/PRBS/PRBS-23/prbs_23_to_8_testbench.v +Project_File_P_0 = cover_toggle 0 vlog_protect 0 file_type verilog group_id 0 cover_exttoggle 0 cover_nofec 0 cover_cond 0 vlog_1995compat 0 vlog_nodebug 0 folder {Top Level} last_compile 1363391989 cover_fsm 0 cover_branch 0 vlog_noload 0 vlog_enable0In 0 cover_excludedefault 0 vlog_disableopt 0 cover_covercells 0 vlog_hazard 0 vlog_showsource 0 cover_optlevel 3 voptflow 1 ood 0 vlog_0InOptions {} toggle - vlog_options {} compile_to work vlog_upper 0 cover_noshort 0 compile_order 1 dont_compile 0 cover_expr 0 cover_stmt 0 +Project_File_1 = C:/qaz/projects/libs/hdl/PRBS/PRBS-23/prbs_23_to_8.v +Project_File_P_1 = cover_toggle 0 vlog_protect 0 file_type verilog group_id 0 cover_exttoggle 0 cover_nofec 0 cover_cond 0 vlog_1995compat 0 vlog_nodebug 0 vlog_noload 0 cover_branch 0 folder {Top Level} last_compile 1363386883 cover_fsm 0 cover_excludedefault 0 vlog_enable0In 0 vlog_disableopt 0 cover_covercells 0 voptflow 1 cover_optlevel 3 vlog_showsource 0 vlog_hazard 0 toggle - vlog_0InOptions {} ood 0 cover_noshort 0 vlog_upper 0 compile_to work vlog_options {} compile_order 0 cover_expr 0 dont_compile 0 cover_stmt 0 +Project_Sim_Count = 0 +Project_Folder_Count = 0 +Echo_Compile_Output = 0 +Save_Compile_Report = 1 +Project_Opt_Count = 0 +ForceSoftPaths = 0 +ProjectStatusDelay = 5000 +VERILOG_DoubleClick = Edit +VERILOG_CustomDoubleClick = +SYSTEMVERILOG_DoubleClick = Edit +SYSTEMVERILOG_CustomDoubleClick = +VHDL_DoubleClick = Edit +VHDL_CustomDoubleClick = +PSL_DoubleClick = Edit +PSL_CustomDoubleClick = +TEXT_DoubleClick = Edit +TEXT_CustomDoubleClick = +SYSTEMC_DoubleClick = Edit +SYSTEMC_CustomDoubleClick = +TCL_DoubleClick = Edit +TCL_CustomDoubleClick = +MACRO_DoubleClick = Edit +MACRO_CustomDoubleClick = +VCD_DoubleClick = Edit +VCD_CustomDoubleClick = +SDF_DoubleClick = Edit +SDF_CustomDoubleClick = +XML_DoubleClick = Edit +XML_CustomDoubleClick = +LOGFILE_DoubleClick = Edit +LOGFILE_CustomDoubleClick = +UCDB_DoubleClick = Edit +UCDB_CustomDoubleClick = +PROJECT_DoubleClick = Edit +PROJECT_CustomDoubleClick = +Project_Major_Version = 6 +Project_Minor_Version = 6 Index: trunk/PRBS/PRBS-7/PRBS-7.cr.mti =================================================================== --- trunk/PRBS/PRBS-7/PRBS-7.cr.mti (nonexistent) +++ trunk/PRBS/PRBS-7/PRBS-7.cr.mti (revision 3) @@ -0,0 +1,15 @@ +C:/qaz/projects/libs/hdl/PRBS/PRBS-7/prbs_7_to_8.v {1 {vlog -work work -vopt -nocovercells C:/qaz/projects/libs/hdl/PRBS/PRBS-7/prbs_7_to_8.v +Model Technology ModelSim SE vlog 6.6b Compiler 2010.05 May 21 2010 +-- Compiling module prbs_7_to_8 + +Top level modules: + prbs_7_to_8 + +} {} {}} C:/qaz/projects/libs/hdl/PRBS/PRBS-7/prbs_7_to_14.v {1 {vlog -work work -vopt -nocovercells C:/qaz/projects/libs/hdl/PRBS/PRBS-7/prbs_7_to_14.v +Model Technology ModelSim SE vlog 6.6b Compiler 2010.05 May 21 2010 +-- Compiling module prbs_7_to_14 + +Top level modules: + prbs_7_to_14 + +} {} {}} Index: trunk/PRBS/PRBS-7/vsim.wlf =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: trunk/PRBS/PRBS-7/vsim.wlf =================================================================== --- trunk/PRBS/PRBS-7/vsim.wlf (nonexistent) +++ trunk/PRBS/PRBS-7/vsim.wlf (revision 3)