URL
https://opencores.org/ocsvn/zap/zap/trunk
Subversion Repositories zap
Compare Revisions
- This comparison shows the changes necessary to convert path
/
- from Rev 32 to Rev 33
- ↔ Reverse comparison
Rev 32 → Rev 33
/zap/trunk/src/ts/arm_test/Config.cfg
13,11 → 13,11
BP_DEPTH => 1024, # Branch predictor depth. |
INSTR_FIFO_DEPTH => 4, # Instruction buffer depth. |
STORE_BUFFER_DEPTH => 16, # Store buffer depth. |
SYNTHESIS => 0, # 0 allows debug messages. |
|
# Testbench configuration. |
EXT_RAM_SIZE => 32768, # External RAM size. |
SEED => -1, # Seed. Use -1 to use random seed. |
SYNTHESIS => 0, # 0 allows debug messages. |
DUMP_START => 2000, # Starting memory address from which to dump. |
DUMP_SIZE => 200, # Length of dump in bytes. |
MAX_CLOCK_CYCLES => 100000, # Clock cycles to run the simulation for. |
/zap/trunk/src/ts/factorial/Config.cfg
13,11 → 13,11
BP_DEPTH => 1024, # Branch predictor depth. |
INSTR_FIFO_DEPTH => 4, # Instruction buffer depth. |
STORE_BUFFER_DEPTH => 16, # Store buffer depth. |
SYNTHESIS => 0, # 0 allows debug messages. |
|
# Testbench configuration. |
EXT_RAM_SIZE => 32768, # External RAM size. |
SEED => -1, # Seed. Use -1 to use random seed. |
SYNTHESIS => 0, # 0 allows debug messages. |
DUMP_START => 2000, # Starting memory address from which to dump. |
DUMP_SIZE => 200, # Length of dump in bytes. |
MAX_CLOCK_CYCLES => 100000, # Clock cycles to run the simulation for. |
/zap/trunk/src/ts/factorial/Description.txt
1,7 → 1,6
This test mainly runs a program to find factorial of 5 and write |
the value 3.14 to a memory location. IRQ/FIQ is available and simply |
does a push, modify and pop back of registers. At the end an |
SWI is called which performs a bunch of multiplications and |
serial load/store. This setup uses the MMU but is set up for |
identity mapping using sections. |
the value 3.14 to a memory location. This setup uses the MMU but is set up for |
identity mapping using sections. IRQs are generated using the timer in the |
testbench. At the end an SWI is called which performs a bunch of multiplications |
and serial load/store. |
|
/zap/trunk/src/ts/uart/Config.cfg
13,11 → 13,11
BP_DEPTH => 1024, # Branch predictor depth. |
INSTR_FIFO_DEPTH => 4, # Instruction buffer depth. |
STORE_BUFFER_DEPTH => 16, # Store buffer depth. |
SYNTHESIS => 0, # 0 allows debug messages. |
|
# Testbench configuration. |
EXT_RAM_SIZE => 32768, # External RAM size. |
SEED => -1, # Seed. Use -1 to use random seed. |
SYNTHESIS => 0, # 0 allows debug messages. |
DUMP_START => 2000, # Starting memory address from which to dump. |
DUMP_SIZE => 200, # Length of dump in bytes. |
IRQ_EN => 0, # Make this 1 to enable IRQ signal from TB. |