| Line 2... |
Line 2... |
## It is compatible with the Zybo Z7-20 and Zybo Z7-10
|
## It is compatible with the Zybo Z7-20 and Zybo Z7-10
|
## To use it in a project:
|
## To use it in a project:
|
## - uncomment the lines corresponding to used pins
|
## - uncomment the lines corresponding to used pins
|
## - rename the used ports (in each line, after get_ports) according to the top level signal names in the project
|
## - rename the used ports (in each line, after get_ports) according to the top level signal names in the project
|
|
|
##Clock signal
|
## System09 usage: This was an XDC file which does not work with ISE 14.7.
|
set_property -dict { PACKAGE_PIN K17 IOSTANDARD LVCMOS33 } [get_ports { sysclk }]; #IO_L12P_T1_MRCC_35 Sch=sysclk
|
## Constraints have been described using UCF syntax.
|
create_clock -add -name sys_clk_pin -period 8.00 -waveform {0 4} [get_ports { sysclk }];
|
|
|
|
|
##Clock signal
|
|
#set_property -dict { PACKAGE_PIN K17 IOSTANDARD LVCMOS33 } [get_ports { sysclk }]; #IO_L12P_T1_MRCC_35 Sch=sysclk
|
|
#create_clock -add -name sys_clk_pin -period 8.00 -waveform {0 4} [get_ports { sysclk }];
|
|
NET "sysclk" LOC = "K17";
|
|
NET "sysclk" IOSTANDARD = LVCMOS33;
|
|
NET "sysclk" TNM_NET="sysclk";
|
|
TIMESPEC "TS_clk"=PERIOD "sysclk" 10 ns HIGH 50 %;
|
|
|
##Switches
|
##Switches
|
#set_property -dict { PACKAGE_PIN G15 IOSTANDARD LVCMOS33 } [get_ports { sw[0] }]; #IO_L19N_T3_VREF_35 Sch=sw[0]
|
#set_property -dict { PACKAGE_PIN G15 IOSTANDARD LVCMOS33 } [get_ports { sw[0] }]; #IO_L19N_T3_VREF_35 Sch=sw[0]
|
#set_property -dict { PACKAGE_PIN P15 IOSTANDARD LVCMOS33 } [get_ports { sw[1] }]; #IO_L24P_T3_34 Sch=sw[1]
|
#set_property -dict { PACKAGE_PIN P15 IOSTANDARD LVCMOS33 } [get_ports { sw[1] }]; #IO_L24P_T3_34 Sch=sw[1]
|
#set_property -dict { PACKAGE_PIN W13 IOSTANDARD LVCMOS33 } [get_ports { sw[2] }]; #IO_L4N_T0_34 Sch=sw[2]
|
#set_property -dict { PACKAGE_PIN W13 IOSTANDARD LVCMOS33 } [get_ports { sw[2] }]; #IO_L4N_T0_34 Sch=sw[2]
|
#set_property -dict { PACKAGE_PIN T16 IOSTANDARD LVCMOS33 } [get_ports { sw[3] }]; #IO_L9P_T1_DQS_34 Sch=sw[3]
|
#set_property -dict { PACKAGE_PIN T16 IOSTANDARD LVCMOS33 } [get_ports { sw[3] }]; #IO_L9P_T1_DQS_34 Sch=sw[3]
|
|
|
|
|
##Buttons
|
##Buttons
|
set_property -dict { PACKAGE_PIN K18 IOSTANDARD LVCMOS33 } [get_ports { RESET_N }]; #IO_L12N_T1_MRCC_35 Sch=btn[0]
|
#set_property -dict { PACKAGE_PIN K18 IOSTANDARD LVCMOS33 } [get_ports { RESET_N }]; #IO_L12N_T1_MRCC_35 Sch=btn[0]
|
set_property -dict { PACKAGE_PIN P16 IOSTANDARD LVCMOS33 } [get_ports { NMI_N }]; #IO_L24N_T3_34 Sch=btn[1]
|
#set_property -dict { PACKAGE_PIN P16 IOSTANDARD LVCMOS33 } [get_ports { NMI_N }]; #IO_L24N_T3_34 Sch=btn[1]
|
|
NET "RESET_N" LOC = "K18";
|
|
NET "RESET_N" IOSTANDARD = LVCMOS33;
|
|
NET "NMI_N" LOC = "P16";
|
|
NET "NMI_N" IOSTANDARD = LVCMOS33;
|
#set_property -dict { PACKAGE_PIN K19 IOSTANDARD LVCMOS33 } [get_ports { btn[2] }]; #IO_L10P_T1_AD11P_35 Sch=btn[2]
|
#set_property -dict { PACKAGE_PIN K19 IOSTANDARD LVCMOS33 } [get_ports { btn[2] }]; #IO_L10P_T1_AD11P_35 Sch=btn[2]
|
#set_property -dict { PACKAGE_PIN Y16 IOSTANDARD LVCMOS33 } [get_ports { btn[3] }]; #IO_L7P_T1_34 Sch=btn[3]
|
#set_property -dict { PACKAGE_PIN Y16 IOSTANDARD LVCMOS33 } [get_ports { btn[3] }]; #IO_L7P_T1_34 Sch=btn[3]
|
|
|
##LEDs
|
##LEDs
|
#set_property -dict { PACKAGE_PIN M14 IOSTANDARD LVCMOS33 } [get_ports { led[0] }]; #IO_L23P_T3_35 Sch=led[0]
|
#set_property -dict { PACKAGE_PIN M14 IOSTANDARD LVCMOS33 } [get_ports { led[0] }]; #IO_L23P_T3_35 Sch=led[0]
|
| Line 104... |
Line 114... |
#HDMI TX CEC
|
#HDMI TX CEC
|
#set_property -dict { PACKAGE_PIN E19 IOSTANDARD LVCMOS33 } [get_ports { hdmi_tx_cec }]; #IO_L5N_T0_AD9N_35 Sch=hdmi_tx_cec
|
#set_property -dict { PACKAGE_PIN E19 IOSTANDARD LVCMOS33 } [get_ports { hdmi_tx_cec }]; #IO_L5N_T0_AD9N_35 Sch=hdmi_tx_cec
|
|
|
|
|
##Pmod Header JA (XADC)
|
##Pmod Header JA (XADC)
|
# RS-232 PMod Atlys Pmod Port JB
|
|
# Pin Dir Function PMOD Dir PinLoc
|
|
# 1 input CTS ja<0> output T3
|
|
# 2 output RTS ja<1> input R3
|
|
# 3 output TXD ja<2> input P6
|
|
# 4 input RXD ja<3> output N5
|
|
#set_property -dict { PACKAGE_PIN N15 IOSTANDARD LVCMOS33 } [get_ports { ja[0] }]; #IO_L21P_T3_DQS_AD14P_35 Sch=JA1_R_p
|
#set_property -dict { PACKAGE_PIN N15 IOSTANDARD LVCMOS33 } [get_ports { ja[0] }]; #IO_L21P_T3_DQS_AD14P_35 Sch=JA1_R_p
|
#set_property -dict { PACKAGE_PIN L14 IOSTANDARD LVCMOS33 } [get_ports { ja[1] }]; #IO_L22P_T3_AD7P_35 Sch=JA2_R_P
|
#set_property -dict { PACKAGE_PIN L14 IOSTANDARD LVCMOS33 } [get_ports { ja[1] }]; #IO_L22P_T3_AD7P_35 Sch=JA2_R_P
|
set_property -dict { PACKAGE_PIN K16 IOSTANDARD LVCMOS33 } [get_ports { RS232_RXD }]; #IO_L24P_T3_AD15P_35 Sch=JA3_R_P
|
#set_property -dict { PACKAGE_PIN K16 IOSTANDARD LVCMOS33 } [get_ports { ja[2] }]; #IO_L24P_T3_AD15P_35 Sch=JA3_R_P
|
set_property -dict { PACKAGE_PIN K14 IOSTANDARD LVCMOS33 } [get_ports { RS232_TXD }]; #IO_L20P_T3_AD6P_35 Sch=JA4_R_P
|
#set_property -dict { PACKAGE_PIN K14 IOSTANDARD LVCMOS33 } [get_ports { ja[3] }]; #IO_L20P_T3_AD6P_35 Sch=JA4_R_P
|
#set_property -dict { PACKAGE_PIN N16 IOSTANDARD LVCMOS33 } [get_ports { ja[4] }]; #IO_L21N_T3_DQS_AD14N_35 Sch=JA1_R_N
|
#set_property -dict { PACKAGE_PIN N16 IOSTANDARD LVCMOS33 } [get_ports { ja[4] }]; #IO_L21N_T3_DQS_AD14N_35 Sch=JA1_R_N
|
#set_property -dict { PACKAGE_PIN L15 IOSTANDARD LVCMOS33 } [get_ports { ja[5] }]; #IO_L22N_T3_AD7N_35 Sch=JA2_R_N
|
#set_property -dict { PACKAGE_PIN L15 IOSTANDARD LVCMOS33 } [get_ports { ja[5] }]; #IO_L22N_T3_AD7N_35 Sch=JA2_R_N
|
#set_property -dict { PACKAGE_PIN J16 IOSTANDARD LVCMOS33 } [get_ports { ja[6] }]; #IO_L24N_T3_AD15N_35 Sch=JA3_R_N
|
#set_property -dict { PACKAGE_PIN J16 IOSTANDARD LVCMOS33 } [get_ports { ja[6] }]; #IO_L24N_T3_AD15N_35 Sch=JA3_R_N
|
#set_property -dict { PACKAGE_PIN J14 IOSTANDARD LVCMOS33 } [get_ports { ja[7] }]; #IO_L20N_T3_AD6N_35 Sch=JA4_R_N
|
#set_property -dict { PACKAGE_PIN J14 IOSTANDARD LVCMOS33 } [get_ports { ja[7] }]; #IO_L20N_T3_AD6N_35 Sch=JA4_R_N
|
|
|
| Line 161... |
Line 165... |
#set_property -dict { PACKAGE_PIN H15 IOSTANDARD LVCMOS33 } [get_ports { je[3] }]; #IO_L19P_T3_35 Sch=je[4]
|
#set_property -dict { PACKAGE_PIN H15 IOSTANDARD LVCMOS33 } [get_ports { je[3] }]; #IO_L19P_T3_35 Sch=je[4]
|
#set_property -dict { PACKAGE_PIN V13 IOSTANDARD LVCMOS33 } [get_ports { je[4] }]; #IO_L3N_T0_DQS_34 Sch=je[7]
|
#set_property -dict { PACKAGE_PIN V13 IOSTANDARD LVCMOS33 } [get_ports { je[4] }]; #IO_L3N_T0_DQS_34 Sch=je[7]
|
#set_property -dict { PACKAGE_PIN U17 IOSTANDARD LVCMOS33 } [get_ports { je[5] }]; #IO_L9N_T1_DQS_34 Sch=je[8]
|
#set_property -dict { PACKAGE_PIN U17 IOSTANDARD LVCMOS33 } [get_ports { je[5] }]; #IO_L9N_T1_DQS_34 Sch=je[8]
|
#set_property -dict { PACKAGE_PIN T17 IOSTANDARD LVCMOS33 } [get_ports { je[6] }]; #IO_L20P_T3_34 Sch=je[9]
|
#set_property -dict { PACKAGE_PIN T17 IOSTANDARD LVCMOS33 } [get_ports { je[6] }]; #IO_L20P_T3_34 Sch=je[9]
|
#set_property -dict { PACKAGE_PIN Y17 IOSTANDARD LVCMOS33 } [get_ports { je[7] }]; #IO_L7N_T1_34 Sch=je[10]
|
#set_property -dict { PACKAGE_PIN Y17 IOSTANDARD LVCMOS33 } [get_ports { je[7] }]; #IO_L7N_T1_34 Sch=je[10]
|
|
##Pmod Header JE
|
|
# RS-232 PMod Zybo Pmod Port JE
|
|
# Pin Dir Function PMOD Dir PinLoc
|
|
# 1 input CTS je<0> output V12
|
|
# 2 output RTS je<1> input W16
|
|
# 3 output TXD je<2> input J15
|
|
# 4 input RXD je<3> output H15
|
|
NET "RS232_RXD" LOC = "J15";
|
|
NET "RS232_RXD" IOSTANDARD = LVCMOS33;
|
|
NET "RS232_TXD" LOC = "H15";
|
|
NET "RS232_TXD" IOSTANDARD = LVCMOS33;
|
|
NET "RS232_TXD" DRIVE = 12;
|
|
NET "RS232_TXD" SLEW = SLOW;
|
|
|
##Pcam MIPI CSI-2 Connector
|
##Pcam MIPI CSI-2 Connector
|
## This configuration expects the sensor to use 672Mbps/lane = 336 MHz HS_Clk
|
## This configuration expects the sensor to use 672Mbps/lane = 336 MHz HS_Clk
|
#create_clock -period 2.976 -name dphy_hs_clock_clk_p -waveform {0.000 1.488} [get_ports dphy_hs_clock_clk_p]
|
#create_clock -period 2.976 -name dphy_hs_clock_clk_p -waveform {0.000 1.488} [get_ports dphy_hs_clock_clk_p]
|
#set_property INTERNAL_VREF 0.6 [get_iobanks 35]
|
#set_property INTERNAL_VREF 0.6 [get_iobanks 35]
|
