OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [branches/] [rc-1.0/] [rtl/] [verilog/] [minsoc_onchip_ram_top.v] - Diff between revs 2 and 7

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 2 Rev 7
Line 44... Line 44...
////                                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////
//
//
// Revision History
// Revision History
//
//
 
// Revision 1.1 2009/10/02 16:49      fajardo
 
// Not using the oe signal (output enable) from 
 
// memories, instead multiplexing the outputs
 
// between the different instantiated blocks
 
//
//
//
// Revision 1.0 2009/08/18 15:15:00   fajardo
// Revision 1.0 2009/08/18 15:15:00   fajardo
// Created interface and tested
// Created interface and tested
//
//
 
 
Line 60... Line 65...
);
);
 
 
// 
// 
// Parameters 
// Parameters 
//
//
parameter    aw_int = 11;               //11 = 2048
 
parameter    adr_width = 13;            //Memory address width, is composed by blocks of aw_int, is not allowed to be less than 12
parameter    adr_width = 13;            //Memory address width, is composed by blocks of aw_int, is not allowed to be less than 12
parameter    blocks = (1<<(adr_width-aw_int)); //generated memory contains "blocks" memory blocks of 2048x32 2048 depth x32 bit data
localparam    aw_int = 11;              //11 = 2048
 
localparam    blocks = (1<<(adr_width-aw_int)); //generated memory contains "blocks" memory blocks of 2048x32 2048 depth x32 bit data
 
 
// 
// 
// I/O Ports 
// I/O Ports 
// 
// 
input      wb_clk_i;
input      wb_clk_i;
Line 127... Line 132...
    ack_re <= #1 1'b1;
    ack_re <= #1 1'b1;
  else
  else
    ack_re <= #1 1'b0;
    ack_re <= #1 1'b0;
end
end
 
 
 
//Generic (multiple inputs x 1 output) MUX
 
localparam mux_in_nr = blocks;
 
localparam slices = adr_width-aw_int;
 
localparam mux_out_nr = blocks-1;
 
 
 
wire [31:0] int_dat_o[0:mux_in_nr-1];
 
wire [31:0] mux_out[0:mux_out_nr-1];
 
 
 
generate
 
genvar j, k;
 
        for (j=0; j<slices; j=j+1) begin : SLICES
 
                for (k=0; k<(mux_in_nr>>(j+1)); k=k+1) begin : MUX
 
                        if (j==0) begin
 
                                mux2 #
 
                (
 
                    .dw(32)
 
                )
 
                mux_int(
 
                    .sel( wb_adr_i[aw_int+2+j] ),
 
                    .in1( int_dat_o[k*2] ),
 
                                    .in2( int_dat_o[k*2+1] ),
 
                    .out( mux_out[k] )
 
                );
 
                        end
 
                        else begin
 
                                mux2 #
 
                (
 
                    .dw(32)
 
                )
 
                mux_int(
 
                    .sel( wb_adr_i[aw_int+2+j] ),
 
                                    .in1( mux_out[(mux_in_nr-(mux_in_nr>>(j-1)))+k*2] ),
 
                                    .in2( mux_out[(mux_in_nr-(mux_in_nr>>(j-1)))+k*2+1] ),
 
                                    .out( mux_out[(mux_in_nr-(mux_in_nr>>j))+k] )
 
                );
 
                        end
 
                end
 
        end
 
endgenerate
 
 
 
//last output = total output
 
assign wb_dat_o = mux_out[mux_out_nr-1];
 
 
 
//(mux_in_nr-(mux_in_nr>>j)): 
 
//-Given sum of 2^i | i = x -> y series can be resumed to 2^(y+1)-2^x
 
//so, with this expression I'm evaluating how many times the internal loop has been run
 
 
wire [blocks-1:0] bank;
wire [blocks-1:0] bank;
 
 
generate
generate
genvar i;
genvar i;
    for (i=0; i < blocks; i=i+1) begin : MEM
    for (i=0; i < blocks; i=i+1) begin : MEM
Line 141... Line 193...
        minsoc_onchip_ram block_ram_0 (
        minsoc_onchip_ram block_ram_0 (
            .clk(wb_clk_i),
            .clk(wb_clk_i),
            .rst(wb_rst_i),
            .rst(wb_rst_i),
            .addr(wb_adr_i[aw_int+1:2]),
            .addr(wb_adr_i[aw_int+1:2]),
            .di(wb_dat_i[7:0]),
            .di(wb_dat_i[7:0]),
            .doq(wb_dat_o[7:0]),
            .doq(int_dat_o[i][7:0]),
            .we(we & bank[i]),
            .we(we & bank[i]),
            .oe(bank[i]),
            .oe(1'b1),
            .ce(be_i[0]));
            .ce(be_i[0])
 
        );
 
 
 
 
        minsoc_onchip_ram block_ram_1 (
        minsoc_onchip_ram block_ram_1 (
            .clk(wb_clk_i),
            .clk(wb_clk_i),
            .rst(wb_rst_i),
            .rst(wb_rst_i),
            .addr(wb_adr_i[aw_int+1:2]),
            .addr(wb_adr_i[aw_int+1:2]),
            .di(wb_dat_i[15:8]),
            .di(wb_dat_i[15:8]),
            .doq(wb_dat_o[15:8]),
            .doq(int_dat_o[i][15:8]),
            .we(we & bank[i]),
            .we(we & bank[i]),
            .oe(bank[i]),
            .oe(1'b1),
            .ce(be_i[1]));
            .ce(be_i[1])
 
        );
 
 
        minsoc_onchip_ram block_ram_2 (
        minsoc_onchip_ram block_ram_2 (
            .clk(wb_clk_i),
            .clk(wb_clk_i),
            .rst(wb_rst_i),
            .rst(wb_rst_i),
            .addr(wb_adr_i[aw_int+1:2]),
            .addr(wb_adr_i[aw_int+1:2]),
            .di(wb_dat_i[23:16]),
            .di(wb_dat_i[23:16]),
            .doq(wb_dat_o[23:16]),
            .doq(int_dat_o[i][23:16]),
            .we(we & bank[i]),
            .we(we & bank[i]),
            .oe(bank[i]),
            .oe(1'b1),
            .ce(be_i[2]));
            .ce(be_i[2])
 
        );
 
 
        minsoc_onchip_ram block_ram_3 (
        minsoc_onchip_ram block_ram_3 (
            .clk(wb_clk_i),
            .clk(wb_clk_i),
            .rst(wb_rst_i),
            .rst(wb_rst_i),
            .addr(wb_adr_i[aw_int+1:2]),
            .addr(wb_adr_i[aw_int+1:2]),
            .di(wb_dat_i[31:24]),
            .di(wb_dat_i[31:24]),
            .doq(wb_dat_o[31:24]),
            .doq(int_dat_o[i][31:24]),
            .we(we & bank[i]),
            .we(we & bank[i]),
            .oe(bank[i]),
            .oe(1'b1),
            .ce(be_i[3]));
            .ce(be_i[3])
 
        );
 
 
    end
    end
endgenerate
endgenerate
 
 
endmodule
endmodule
 
 
 
module mux2(sel,in1,in2,out);
 
 
 
parameter dw = 32;
 
 
 
input sel;
 
input [dw-1:0] in1, in2;
 
output reg [dw-1:0] out;
 
 
 
always @ (sel or in1 or in2)
 
begin
 
        case (sel)
 
                1'b0: out = in1;
 
                1'b1: out = in2;
 
        endcase
 
end
 
 
 
endmodule
 
 
 No newline at end of file
 No newline at end of file

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.