#!/bin/bash
|
#!/bin/bash
|
# Author: Constantinos Xanthopoulos
|
# Author: Constantinos Xanthopoulos
|
# This script install MinSOC tree
|
# This script install MinSOC tree
|
# under a specific directory.
|
# under a specific directory.
|
|
|
# ===== CONFIGURATIONS =====
|
# ===== CONFIGURATIONS =====
|
# ==========================
|
# ==========================
|
|
|
# Where should I put the dir. minsoc?
|
# Where should I put the dir. minsoc?
|
# ex. /home/conx/Thesis/
|
# ex. /home/conx/Thesis/
|
DIR_TO_INSTALL=`pwd`
|
DIR_TO_INSTALL=`pwd`
|
|
|
# This variable should be set to trunk
|
# This variable should be set to trunk
|
# or to stable.
|
# or to stable.
|
VERSION=""
|
VERSION=""
|
|
|
# This variable should take one of
|
# This variable should take one of
|
# the following values depending
|
# the following values depending
|
# to your system: linux, cygwin, freebsd
|
# to your system: linux, cygwin, freebsd
|
ENV=""
|
ENV=""
|
|
|
# !!! DO NOT EDIT BELLOW THIS LINE !!!
|
# !!! DO NOT EDIT BELLOW THIS LINE !!!
|
# ===================================
|
# ===================================
|
|
|
# ===== SCRIPT ======
|
# ===== SCRIPT ======
|
# ===================
|
# ===================
|
|
|
|
|
# Debug ?
|
# Debug ?
|
export DEBUG=0;
|
export DEBUG=0;
|
. beautify.sh
|
. beautify.sh
|
|
|
function testtool
|
function testtool
|
{
|
{
|
# is_missing=`which $1 2>&1 | grep no`
|
# is_missing=`which $1 2>&1 | grep no`
|
is_missing=`whereis -b $1 2>&1 | grep :$`
|
is_missing=`whereis -b $1 2>&1 | grep :$`
|
if [ -z "$is_missing" ]
|
if [ -z "$is_missing" ]
|
then
|
then
|
cecho "$1 is installed, pass"
|
cecho "$1 is installed, pass"
|
else
|
else
|
errormsg "$1 is not installed, install it and re-run this installation script."
|
errormsg "$1 is not installed, install it and re-run this installation script."
|
fi
|
fi
|
}
|
}
|
|
|
# User check!
|
# User check!
|
if [ `whoami` = "root" ];
|
if [ `whoami` = "root" ];
|
then
|
then
|
errormsg "You shouldn't be root for this script to run.";
|
errormsg "You shouldn't be root for this script to run.";
|
fi;
|
fi;
|
|
|
# Wizard
|
|
if [ -z "${ALTDIR}" ]
|
|
then
|
|
cnecho "Give full path (ex. /home/foo/) for installation directory or leave empty for "${DIR_TO_INSTALL}": ";
|
|
read ALTDIR;
|
|
if [ ! -z "${ALTDIR}" ]
|
|
then
|
|
DIR_TO_INSTALL=${ALTDIR}
|
|
fi
|
|
cecho "${DIR_TO_INSTALL} selected";
|
|
fi
|
|
|
|
# Directory exists?
|
|
if [ ! -d ${DIR_TO_INSTALL} ]
|
|
then
|
|
errormsg "Directory doesn't exist. Please create it";
|
|
fi;
|
|
|
|
cd ${DIR_TO_INSTALL}
|
|
|
|
|
|
#setting environment
|
|
ENV=`uname -o`
|
|
if [ "$ENV" != "GNU/Linux" ] && [ "$ENV" != "Cygwin" ]
|
|
then
|
|
errormsg "Environment $ENV not supported by this script."
|
|
fi
|
|
cecho "Building tools for ${ENV} system"
|
|
|
|
|
|
# Testing necessary tools
|
# Testing necessary tools
|
cecho "Testing if necessary tools are installed, program "whereis" is required."
|
cecho "Testing if necessary tools are installed, program "whereis" is required."
|
testtool wget
|
testtool wget
|
testtool svn
|
testtool svn
|
testtool tar
|
testtool tar
|
testtool sed
|
testtool sed
|
testtool patch
|
testtool patch
|
testtool gcc
|
testtool gcc
|
testtool make
|
testtool make
|
testtool libncurses
|
testtool libncurses
|
testtool flex
|
testtool flex
|
testtool bison
|
testtool bison
|
if [ "$ENV" == "Cygwin" ]
|
if [ "$ENV" == "Cygwin" ]
|
then
|
then
|
testtool ioperm
|
testtool ioperm
|
testtool libusb
|
testtool libusb
|
fi
|
fi
|
|
|
|
|
# Which Version?
|
# Wizard
|
if [ -z ${VERSION} ]
|
if [ -z "${ALTDIR}" ]
|
then
|
then
|
while [ "$VERSION" != "trunk" -a "$VERSION" != "stable" ]
|
cnecho "Give full path (ex. /home/foo/) for installation directory or leave empty for "${DIR_TO_INSTALL}": ";
|
do
|
read ALTDIR;
|
cnecho "Select MinSOC Version [stable/trunk]: "
|
if [ ! -z "${ALTDIR}" ]
|
read VERSION;
|
|
done
|
|
fi
|
|
|
|
|
|
# Checkout MinSOC
|
|
if [ "${VERSION}" = "trunk" ]
|
|
then
|
then
|
execcmd "Download minsoc" "svn co -q http://opencores.org/ocsvn/minsoc/minsoc/trunk/ minsoc"
|
DIR_TO_INSTALL=${ALTDIR}
|
execcmd "cd minsoc/backend/std"
|
fi
|
execcmd "Selecting standard configuration (not synthesizable)" "./configure"
|
cecho "${DIR_TO_INSTALL} selected";
|
execcmd "cd ${DIR_TO_INSTALL}"
|
|
else
|
|
execcmd "Download minsoc" "svn co -q http://opencores.org/ocsvn/minsoc/minsoc/tags/release-0.9/ minsoc"
|
|
execcmd "cd minsoc/rtl/verilog"
|
|
|
|
execcmd "Checkout adv_jtag_bridge" "svn co -q http://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk adv_debug_sys"
|
|
execcmd "Checkout ethmac" "svn co -q http://opencores.org/ocsvn/ethmac/ethmac/trunk ethmac"
|
|
execcmd "Checkout openrisc" "svn co -q http://opencores.org/ocsvn/openrisc/openrisc/trunk/or1200 or1200"
|
|
execcmd "Checkout uart" "svn co -q http://opencores.org/ocsvn/uart16550/uart16550/trunk uart16550"
|
|
fi
|
fi
|
|
|
|
if [ ! -d ${DIR_TO_INSTALL} ]
|
#Tools directory
|
|
if [ ! -d ${DIR_TO_INSTALL}/tools ]
|
|
then
|
then
|
execcmd "mkdir tools"
|
errormsg "Directory doesn't exist. Please create it";
|
fi;
|
fi;
|
|
|
|
|
#Installing GDB
|
#Setting environment
|
execcmd "cd ${DIR_TO_INSTALL}/tools"
|
ENV=`uname -o`
|
execcmd "Downloading GDB sources" "wget ftp://anonymous:anonymous@ftp.gnu.org/gnu/gdb/gdb-6.8.tar.bz2"
|
if [ "$ENV" != "GNU/Linux" ] && [ "$ENV" != "Cygwin" ]
|
execcmd "Downloading GDB OpenRISC patch" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-gdb-6.8-patch-2.4.bz2"
|
then
|
execcmd "Downloading GDB Advanced Debug System patch" "svn export -q http://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk/Patches/GDB6.8/gdb-6.8-bz436037-reg-no-longer-active.patch"
|
errormsg "Environment $ENV not supported by this script."
|
|
fi
|
execcmd "Uncompressing GDB" "tar -jxf gdb-6.8.tar.bz2"
|
cecho "Building tools for ${ENV} system"
|
execcmd "bzip2 -d or32-gdb-6.8-patch-2.4.bz2"
|
|
execcmd "cd gdb-6.8"
|
|
execcmd "Patching GDB" "patch -p1 < ../or32-gdb-6.8-patch-2.4"
|
|
execcmd "patch -p1 < ../gdb-6.8-bz436037-reg-no-longer-active.patch"
|
|
|
|
execcmd "Compiling GDB" "mkdir b-gdb"
|
|
execcmd "cd b-gdb"
|
|
execcmd "../configure --target=or32-elf --disable-werror --prefix=$DIR_TO_INSTALL/tools"
|
|
execcmd "make"
|
|
make install #avoid Fedora failing due to missing Makeinfo
|
|
PATH=$PATH:$DIR_TO_INSTALL/tools/bin
|
|
|
|
|
|
# Installing the GNU Toolchain
|
|
cecho "Installing the GNU Toolchain"
|
|
|
|
is_arch64=`uname -m | grep 64`
|
is_arch64=`uname -m | grep 64`
|
if [ -z $is_arch64 ]
|
if [ -z $is_arch64 ]
|
then
|
then
|
KERNEL_ARCH="32"
|
KERNEL_ARCH="32"
|
else
|
else
|
KERNEL_ARCH="64"
|
KERNEL_ARCH="64"
|
fi
|
fi
|
|
|
cd $DIR_TO_INSTALL/tools;
|
|
|
|
|
#Creating directory structure
|
|
cecho "\nCreating directory structure"
|
|
cd ${DIR_TO_INSTALL}
|
|
execcmd "Creating directory ./download for downloaded packages" "mkdir -p download"
|
|
execcmd "Creating directory ./tools for package binaries" "mkdir -p tools"
|
|
|
|
|
|
#Downloading everything we need
|
|
cecho "\nDownloading packages"
|
|
cd ${DIR_TO_INSTALL}
|
|
cecho "Download MinSoC"
|
|
svn co -q http://opencores.org/ocsvn/minsoc/minsoc/trunk/ minsoc #user need to input password, execcmd omits command output and should be this way
|
|
execcmd "cd ${DIR_TO_INSTALL}/download"
|
if [ "$ENV" == "Cygwin" ]
|
if [ "$ENV" == "Cygwin" ]
|
then
|
then
|
execcmd "Download toolchain (it may take a while)" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-cygwin-1.7.tar.bz2";
|
execcmd "Downloading GNU Toolchain" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-cygwin-1.7.tar.bz2";
|
execcmd "Un-tar" "tar xf or32-elf-cygwin-1.7.tar.bz2";
|
|
else
|
else
|
if [ $KERNEL_ARCH == "32" ];
|
if [ $KERNEL_ARCH == "32" ];
|
then
|
then
|
execcmd "Download toolchain (it may take a while)" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86.tar.bz2";
|
execcmd "Downloading GNU Toolchain" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86.tar.bz2";
|
execcmd "Un-tar" "tar xf or32-elf-linux-x86.tar.bz2";
|
|
elif [ $KERNEL_ARCH == "64" ];
|
elif [ $KERNEL_ARCH == "64" ];
|
then
|
then
|
execcmd "Download toolchain (it may take a while)" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86_64.tar.bz2";
|
execcmd "Downloading GNU Toolchain" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86_64.tar.bz2";
|
execcmd "Un-tar" "tar xf or32-elf-linux-x86_64.tar.bz2";
|
|
else
|
|
errormsg "Not a correct architecture, $KERNEL_ARCH. Check Configurations";
|
|
fi
|
fi
|
fi
|
fi
|
|
execcmd "Downloading GDB" "wget ftp://anonymous:anonymous@ftp.gnu.org/gnu/gdb/gdb-6.8.tar.bz2"
|
|
execcmd "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-gdb-6.8-patch-2.4.bz2"
|
|
execcmd "svn export -q http://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk/Patches/GDB6.8/gdb-6.8-bz436037-reg-no-longer-active.patch"
|
|
if [ "$ENV" != "Cygwin" ]
|
|
then
|
|
execcmd "Downloading libusb-0.1 for Advanced Debug System" "wget http://sourceforge.net/projects/libusb/files/libusb-0.1%20%28LEGACY%29/0.1.12/libusb-0.1.12.tar.gz"
|
|
fi
|
|
execcmd "Downloading libftdi for Advanced Debug System" "wget http://www.intra2net.com/en/developer/libftdi/download/libftdi-0.19.tar.gz"
|
|
execcmd "Downloading Icarus Verilog" "wget ftp://icarus.com/pub/eda/verilog/v0.9/verilog-0.9.4.tar.gz"
|
|
|
PATH=$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin
|
|
|
|
|
#Uncompressing everything
|
|
cecho "\nUncompressing packages"
|
|
if [ "$ENV" == "Cygwin" ]
|
|
then
|
|
execcmd "tar xf or32-elf-cygwin-1.7.tar.bz2";
|
|
else
|
|
if [ $KERNEL_ARCH == "32" ];
|
|
then
|
|
execcmd "tar xf or32-elf-linux-x86.tar.bz2";
|
|
elif [ $KERNEL_ARCH == "64" ];
|
|
then
|
|
execcmd "tar xf or32-elf-linux-x86_64.tar.bz2";
|
|
fi
|
|
fi
|
|
execcmd "tar -jxf gdb-6.8.tar.bz2"
|
|
execcmd "bzip2 -d or32-gdb-6.8-patch-2.4.bz2"
|
|
if [ "$ENV" != "Cygwin" ]
|
|
then
|
|
execcmd "tar zxf libusb-0.1.12.tar.gz"
|
|
fi
|
|
execcmd "tar zxf libftdi-0.19.tar.gz"
|
|
execcmd "tar zxf verilog-0.9.4.tar.gz"
|
|
|
# Preparing MinSoC Specifics
|
|
cecho "I will now start to compile everything that's needed";
|
|
|
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/utils"
|
#Compiling and Installing all packages
|
execcmd "Make utils" "make"
|
cecho "\nCompiling and installing packages"
|
|
# Installing the GNU Toolchain
|
|
execcmd "Installing GNU Toolchain" "cp -Rp or32-elf $DIR_TO_INSTALL/tools"
|
|
PATH=$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin
|
|
|
execcmd "cd ../support"
|
|
execcmd "Make support tools" "make"
|
|
|
|
execcmd "cd ../drivers"
|
#Installing GDB
|
execcmd "Make drivers" "make"
|
execcmd "cd gdb-6.8"
|
|
execcmd "patch -p1 < ../or32-gdb-6.8-patch-2.4"
|
|
execcmd "patch -p1 < ../gdb-6.8-bz436037-reg-no-longer-active.patch"
|
|
|
execcmd "cd ../uart"
|
execcmd "mkdir -p build"
|
execcmd "Make UART" "make"
|
execcmd "cd build"
|
|
execcmd "../configure --target=or32-elf --disable-werror --prefix=$DIR_TO_INSTALL/tools"
|
|
execcmd "Compiling GDB" "make"
|
|
make install 1>>${DIR_TO_INSTALL}/progress.log 2>>${DIR_TO_INSTALL}/error.log #avoid Fedora failing due to missing Makeinfo
|
|
PATH=$PATH:${DIR_TO_INSTALL}/tools/bin
|
|
|
|
|
# adv_jtag_bridge install
|
#Installing Advanced JTAG Bridge support libraries
|
if [ "$ENV" != "Cygwin" ]
|
if [ "$ENV" != "Cygwin" ]
|
then
|
then
|
execcmd "cd ${DIR_TO_INSTALL}/tools"
|
execcmd "cd ${DIR_TO_INSTALL}/download/libusb-0.1.12"
|
execcmd "Acquiring libusb-0.1 for Advanced Debug System" "wget http://sourceforge.net/projects/libusb/files/libusb-0.1%20%28LEGACY%29/0.1.12/libusb-0.1.12.tar.gz"
|
|
execcmd "tar zxf libusb-0.1.12.tar.gz"
|
|
execcmd "cd libusb-0.1.12"
|
|
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
|
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
|
execcmd "make"
|
execcmd "Installing libusb-0.1" "make"
|
execcmd "make install"
|
execcmd "make install"
|
fi
|
fi
|
|
|
execcmd "cd ${DIR_TO_INSTALL}/tools"
|
execcmd "cd ${DIR_TO_INSTALL}/download/libftdi-0.19"
|
execcmd "Acquiring libftdi for Advanced Debug System" "wget http://www.intra2net.com/en/developer/libftdi/download/libftdi-0.19.tar.gz"
|
|
execcmd "tar zxf libftdi-0.19.tar.gz"
|
|
execcmd "cd libftdi-0.19"
|
|
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
|
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
|
execcmd "make"
|
execcmd "Compiling libftdi" "make"
|
execcmd "make install"
|
execcmd "make install"
|
|
|
execcmd "Compiling Advanced JTAG Bridge" "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge"
|
|
|
|
|
#Installing Advanced JTAG Bridge
|
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge"
|
if [ `grep "INCLUDE_JSP_SERVER=true" Makefile` != "" ]
|
if [ `grep "INCLUDE_JSP_SERVER=true" Makefile` != "" ]
|
then
|
then
|
cecho "Switching off the adv_jtag_bridge JSP_SERVER option";
|
#Switching off the adv_jtag_bridge JSP_SERVER option
|
sed 's/INCLUDE_JSP_SERVER=true/INCLUDE_JSP_SERVER=false/' Makefile > TMPFILE && mv TMPFILE Makefile
|
sed 's/INCLUDE_JSP_SERVER=true/INCLUDE_JSP_SERVER=false/' Makefile > TMPFILE && mv TMPFILE Makefile
|
fi
|
fi
|
|
|
if [ "${ENV}" == "GNU/Linux" ]
|
if [ "${ENV}" == "GNU/Linux" ]
|
then
|
then
|
cecho "Setting the right build environment";
|
#Setting the right build environment
|
sed 's/BUILD_ENVIRONMENT=cygwin/BUILD_ENVIRONMENT=linux/' Makefile > TMPFILE && mv TMPFILE Makefile
|
sed 's/BUILD_ENVIRONMENT=cygwin/BUILD_ENVIRONMENT=linux/' Makefile > TMPFILE && mv TMPFILE Makefile
|
fi
|
fi
|
|
|
|
#preparing the Makefile to find and link libraries
|
sed "s%prefix = /usr/local%prefix = ${DIR_TO_INSTALL}/tools%" Makefile > TMPFILE && mv TMPFILE Makefile
|
sed "s%prefix = /usr/local%prefix = ${DIR_TO_INSTALL}/tools%" Makefile > TMPFILE && mv TMPFILE Makefile
|
sed "s%\$(CC) \$(CFLAGS)%\$(CC) \$(CFLAGS) \$(INCLUDEDIRS)%" Makefile > TMPFILE && mv TMPFILE Makefile
|
sed "s%\$(CC) \$(CFLAGS)%\$(CC) \$(CFLAGS) \$(INCLUDEDIRS)%" Makefile > TMPFILE && mv TMPFILE Makefile
|
sed "s%INCLUDEDIRS =%INCLUDEDIRS = -I${DIR_TO_INSTALL}/tools/include%" Makefile > TMPFILE && mv TMPFILE Makefile
|
sed "s%INCLUDEDIRS =%INCLUDEDIRS = -I${DIR_TO_INSTALL}/tools/include%" Makefile > TMPFILE && mv TMPFILE Makefile
|
sed "s%LIBS =%LIBS = -L${DIR_TO_INSTALL}/tools/lib -Wl,-R${DIR_TO_INSTALL}/tools/lib%" Makefile > TMPFILE && mv TMPFILE Makefile
|
sed "s%LIBS =%LIBS = -L${DIR_TO_INSTALL}/tools/lib -Wl,-R${DIR_TO_INSTALL}/tools/lib%" Makefile > TMPFILE && mv TMPFILE Makefile
|
|
|
execcmd "Make adv_jtag_bridge" "make"
|
#properly installing Advanced JTAG Bridge
|
execcmd "Installing adv_jtag_bridge" "make install"
|
execcmd "Compiling Advanced JTAG Bridge" "make"
|
|
execcmd "make install"
|
|
|
#install extra tools
|
|
execcmd "cd ${DIR_TO_INSTALL}/tools"
|
|
|
|
execcmd "Acquiring Icarus Verilog Tool" "wget ftp://icarus.com/pub/eda/verilog/v0.9/verilog-0.9.4.tar.gz"
|
#Installing Icarus Verilog
|
execcmd "tar zxf verilog-0.9.4.tar.gz"
|
execcmd "cd ${DIR_TO_INSTALL}/download/verilog-0.9.4"
|
execcmd "cd verilog-0.9.4"
|
|
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
|
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
|
execcmd "make"
|
execcmd "Compiling Icarus Verilog" "make"
|
execcmd "make install"
|
execcmd "make install"
|
|
|
|
|
|
#Configuring MinSoC
|
|
cecho "\nConfiguring MinSoC"
|
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/backend/std"
|
|
execcmd "Configuring MinSoC as standard board (simulatable but not synthesizable)" "./configure"
|
|
execcmd "cd ${DIR_TO_INSTALL}"
|
|
|
|
|
#Configuring Advanced Debug System to work with MinSoC
|
#Configuring Advanced Debug System to work with MinSoC
|
cecho "Configuring Advanced Debug System to work with MinSoC"
|
cecho "\nConfiguring Advanced Debug System to work with MinSoC"
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Hardware/adv_dbg_if/rtl/verilog"
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Hardware/adv_dbg_if/rtl/verilog"
|
sed "s%\`define DBG_JSP_SUPPORTED%//\`define DBG_JSP_SUPPORTED%" adbg_defines.v > TMPFILE && mv TMPFILE adbg_defines.v
|
sed "s%\`define DBG_JSP_SUPPORTED%//\`define DBG_JSP_SUPPORTED%" adbg_defines.v > TMPFILE && mv TMPFILE adbg_defines.v
|
|
|
cecho "Compiling and moving adv_jtag_bridge debug modules for simulation"
|
#Compiling and moving adv_jtag_bridge debug modules for simulation
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge/sim_lib/icarus"
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge/sim_lib/icarus"
|
execcmd "make"
|
execcmd "make"
|
execcmd "cp jp-io-vpi.vpi ${DIR_TO_INSTALL}/minsoc/bench/verilog/vpi"
|
execcmd "cp jp-io-vpi.vpi ${DIR_TO_INSTALL}/minsoc/bench/verilog/vpi"
|
|
|
|
|
#trying to set-up new variables
|
#Precompiling firmwares
|
|
cecho "\nPrecompiling delivered firmwares";
|
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/utils"
|
|
execcmd "Make utils" "make"
|
|
|
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/support"
|
|
execcmd "Make support tools" "make"
|
|
|
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/drivers"
|
|
execcmd "Make drivers" "make"
|
|
|
|
execcmd "cd ${DIR_TO_INSTALL}/minsoc/sw/uart"
|
|
execcmd "Make UART" "make"
|
|
|
|
|
|
#Setting-up new variables
|
|
cecho "\nSystem configurations"
|
execcmd "Adding MinSoC tools to PATH" "echo \"PATH=\\\$PATH:$DIR_TO_INSTALL/tools/bin\" >> /home/$(whoami)/.bashrc;";
|
execcmd "Adding MinSoC tools to PATH" "echo \"PATH=\\\$PATH:$DIR_TO_INSTALL/tools/bin\" >> /home/$(whoami)/.bashrc;";
|
execcmd "Adding OpenRISC toolchain to PATH" "echo \"PATH=\\\$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin/\" >> /home/$(whoami)/.bashrc;";
|
execcmd "Adding OpenRISC toolchain to PATH" "echo \"PATH=\\\$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin/\" >> /home/$(whoami)/.bashrc;";
|
cecho "Installation Finished"
|
|
|
cecho "\nInstallation Complete!"
|
cecho "Before using the system, load the new environment variables doing this: source /home/$(whoami)/.bashrc"
|
cecho "Before using the system, load the new environment variables doing this: source /home/$(whoami)/.bashrc"
|
|
cecho "You may remove the ${DIR_TO_INSTALL}/download directory if you wish."
|
|
|
No newline at end of file
|
No newline at end of file
|
