OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [trunk/] [rtl/] [verilog/] [minsoc_clock_manager.v] - Diff between revs 56 and 62

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 56 Rev 62
Line 27... Line 27...
                clk_int <= ~clk_int;
                clk_int <= ~clk_int;
                clock_divisor <= 32'h0000_0000;
                clock_divisor <= 32'h0000_0000;
        end
        end
end
end
assign clk_o = clk_int;
assign clk_o = clk_int;
`elsif FPGA_CLOCK_DIVISION
 
 
 
 
`elsif FPGA_CLOCK_DIVISION
 `ifdef ALTERA_FPGA
 `ifdef ALTERA_FPGA
    `ifdef ARRIA_GX
altera_pll #
      defparam systemPll.FAMILY = "Arria GX";
(
    `elsif ARRIA_II_GX
    .FREQ_DIV(divisor)
      defparam systemPll.FAMILY = "Arria II GX";
)
    `elsif CYCLONE_I
minsoc_altera_pll
      defparam systemPll.FAMILY = "Cyclone I";
 
    `elsif CYCLONE_II
 
      defparam systemPll.FAMILY = "Cyclone II";
 
    `elsif CYCLONE_III
 
      defparam systemPll.FAMILY = "Cyclone III";
 
    `elsif CYCLONE_III_LS
 
      defparam systemPll.FAMILY = "Cyclone III LS";
 
    `elsif CYCLONE_IV_E
 
      defparam systemPll.FAMILY = "Cyclone IV E";
 
    `elsif CYCLONE_IV_GS
 
      defparam systemPll.FAMILY = "Cyclone IV GS";
 
    `elsif MAX_II
 
      defparam systemPll.FAMILY = "MAX II";
 
    `elsif MAX_V
 
      defparam systemPll.FAMILY = "MAX V";
 
    `elsif MAX3000A
 
      defparam systemPll.FAMILY = "MAX3000A";
 
    `elsif MAX7000AE
 
      defparam systemPll.FAMILY = "MAX7000AE";
 
    `elsif MAX7000B
 
      defparam systemPll.FAMILY = "MAX7000B";
 
    `elsif MAX7000S
 
      defparam systemPll.FAMILY = "MAX7000S";
 
    `elsif STRATIX
 
      defparam systemPll.FAMILY = "Stratix";
 
    `elsif STRATIX_II
 
      defapram systemPll.FAMILY = "Stratix II";
 
    `elsif STRATIX_II_GX
 
      defparam systemPll.FAMILY = "Stratix II GX";
 
    `elsif STRATIX_III
 
      defparam systemPll.FAMILY = "Stratix III"
 
    `endif
 
 
 
    defparam systemPll.FREQ_DIV = divisor;
 
 
 
    minsoc_pll systemPll
 
      (
      (
       .inclk0(clk_i),
       .inclk0(clk_i),
       .c0(clk_o)
       .c0(clk_o)
      );
      );
 
 
`elsif XILINX_FPGA
`elsif XILINX_FPGA
 
xilinx_dcm #
`ifdef SPARTAN2
(
        `define MINSOC_DLL
    .divisor(divisor)
`elsif VIRTEX
)
        `define MINSOC_DLL
minsoc_xilinx_dcm
`endif  // !SPARTAN2/VIRTEX
(
 
    .clk_i(clk_i),
`ifdef SPARTAN3
    .clk_o(clk_o)
        `define MINSOC_DCM
 
`elsif VIRTEX2
 
        `define MINSOC_DCM
 
`endif  // !SPARTAN3/VIRTEX2
 
 
 
`ifdef SPARTAN3E
 
        `define MINSOC_DCM_SP
 
`elsif SPARTAN3A
 
        `define MINSOC_DCM_SP
 
`endif  // !SPARTAN3E/SPARTAN3A
 
 
 
`ifdef VIRTEX4
 
        `define MINSOC_DCM_ADV
 
        `define MINSOC_DCM_COMPONENT "VIRTEX4"
 
`elsif VIRTEX5
 
        `define MINSOC_DCM_ADV
 
        `define MINSOC_DCM_COMPONENT "VIRTEX5"
 
`endif  // !VIRTEX4/VIRTEX5
 
 
 
wire CLKIN_IN;
 
wire CLKDV_OUT;
 
 
 
assign CLKIN_IN = clk_i;
 
assign clk_o = CLKDV_OUT;
 
 
 
wire CLKIN_IBUFG;
 
wire CLK0_BUF;
 
wire CLKFB_IN;
 
wire CLKDV_BUF;
 
 
 
IBUFG CLKIN_IBUFG_INST (
 
        .I(CLKIN_IN),
 
        .O(CLKIN_IBUFG)
 
);
 
 
 
BUFG CLK0_BUFG_INST (
 
        .I(CLK0_BUF),
 
        .O(CLKFB_IN)
 
);
 
 
 
BUFG CLKDV_BUFG_INST (
 
        .I(CLKDV_BUF),
 
        .O(CLKDV_OUT)
 
);
 
 
 
`ifdef MINSOC_DLL
 
 
 
CLKDLL #(
 
        .CLKDV_DIVIDE(divisor),                 // Divide by: 1.5,2.0,2.5,3.0,4.0,5.0,8.0 or 16.0
 
        .DUTY_CYCLE_CORRECTION("TRUE"),         // Duty cycle correction, TRUE or FALSE
 
        .FACTORY_JF(16'hC080),                  // FACTORY JF Values
 
        .STARTUP_WAIT("FALSE")                  // Delay config DONE until DLL LOCK, TRUE/FALSE
 
) CLKDLL_inst (
 
        .CLK0(CLK0_BUF),                        // 0 degree DLL CLK output
 
        .CLK180(),                              // 180 degree DLL CLK output
 
        .CLK270(),                              // 270 degree DLL CLK output
 
        .CLK2X(),                               // 2X DLL CLK output
 
        .CLK90(),                               // 90 degree DLL CLK output
 
        .CLKDV(CLKDV_BUF),                      // Divided DLL CLK out (CLKDV_DIVIDE)
 
        .LOCKED(),                              // DLL LOCK status output
 
        .CLKFB(CLKFB_IN),                       // DLL clock feedback
 
        .CLKIN(CLKIN_IBUFG),                    // Clock input (from IBUFG, BUFG or DLL)
 
        .RST(1'b0)                              // DLL asynchronous reset input
 
);
 
 
 
`elsif MINSOC_DCM
 
 
 
DCM #(
 
        .SIM_MODE("SAFE"),                      // Simulation: "SAFE" vs. "FAST", see "Synthesis and Simulation Design Guide" for details
 
        .CLKDV_DIVIDE(divisor),                 // Divide by: 1.5,2.0,2.5,3.0,3.5,4.0,4.5,5.0,5.5,6.0,6.5
 
                                                //   7.0,7.5,8.0,9.0,10.0,11.0,12.0,13.0,14.0,15.0 or 16.0
 
        .CLKFX_DIVIDE(1),                       // Can be any integer from 1 to 32
 
        .CLKFX_MULTIPLY(4),                     // Can be any integer from 2 to 32
 
        .CLKIN_DIVIDE_BY_2("FALSE"),            // TRUE/FALSE to enable CLKIN divide by two feature
 
        .CLKIN_PERIOD(0.0),                     // Specify period of input clock
 
        .CLKOUT_PHASE_SHIFT("NONE"),            // Specify phase shift of NONE, FIXED or VARIABLE
 
        .CLK_FEEDBACK("1X"),                    // Specify clock feedback of NONE, 1X or 2X
 
        .DESKEW_ADJUST("SYSTEM_SYNCHRONOUS"),   // SOURCE_SYNCHRONOUS, SYSTEM_SYNCHRONOUS or
 
                                                //   an integer from 0 to 15
 
        .DFS_FREQUENCY_MODE("LOW"),             // HIGH or LOW frequency mode for frequency synthesis
 
        .DLL_FREQUENCY_MODE("LOW"),             // HIGH or LOW frequency mode for DLL
 
        .DUTY_CYCLE_CORRECTION("TRUE"),         // Duty cycle correction, TRUE or FALSE
 
        .FACTORY_JF(16'hC080),                  // FACTORY JF values
 
        .PHASE_SHIFT(0),                         // Amount of fixed phase shift from -255 to 255
 
        .STARTUP_WAIT("FALSE")                  // Delay configuration DONE until DCM LOCK, TRUE/FALSE
 
) DCM_inst (
 
        .CLK0(CLK0_BUF),                        // 0 degree DCM CLK output
 
        .CLK180(),                              // 180 degree DCM CLK output
 
        .CLK270(),                              // 270 degree DCM CLK output
 
        .CLK2X(),                               // 2X DCM CLK output
 
        .CLK2X180(),                            // 2X, 180 degree DCM CLK out
 
        .CLK90(),                               // 90 degree DCM CLK output
 
        .CLKDV(CLKDV_BUF),                      // Divided DCM CLK out (CLKDV_DIVIDE)
 
        .CLKFX(),                               // DCM CLK synthesis out (M/D)
 
        .CLKFX180(),                            // 180 degree CLK synthesis out
 
        .LOCKED(),                              // DCM LOCK status output
 
        .PSDONE(),                              // Dynamic phase adjust done output
 
        .STATUS(),                              // 8-bit DCM status bits output
 
        .CLKFB(CLKFB_IN),                       // DCM clock feedback
 
        .CLKIN(CLKIN_IBUFG),                    // Clock input (from IBUFG, BUFG or DCM)
 
        .PSCLK(1'b0),                           // Dynamic phase adjust clock input
 
        .PSEN(1'b0),                            // Dynamic phase adjust enable input
 
        .PSINCDEC(1'b0),                        // Dynamic phase adjust increment/decrement
 
        .RST(1'b0)                              // DCM asynchronous reset input
 
);
 
 
 
`elsif MINSOC_DCM_SP
 
 
 
DCM_SP #(
 
        .CLKDV_DIVIDE(divisor),                 // Divide by: 1.5,2.0,2.5,3.0,3.5,4.0,4.5,5.0,5.5,6.0,6.5
 
                                                //   7.0,7.5,8.0,9.0,10.0,11.0,12.0,13.0,14.0,15.0 or 16.0
 
        .CLKFX_DIVIDE(1),                       // Can be any integer from 1 to 32
 
        .CLKFX_MULTIPLY(4),                     // Can be any integer from 2 to 32
 
        .CLKIN_DIVIDE_BY_2("FALSE"),            // TRUE/FALSE to enable CLKIN divide by two feature
 
        .CLKIN_PERIOD(0.0),                     // Specify period of input clock
 
        .CLKOUT_PHASE_SHIFT("NONE"),            // Specify phase shift of NONE, FIXED or VARIABLE
 
        .CLK_FEEDBACK("1X"),                    // Specify clock feedback of NONE, 1X or 2X
 
        .DESKEW_ADJUST("SYSTEM_SYNCHRONOUS"),   // SOURCE_SYNCHRONOUS, SYSTEM_SYNCHRONOUS or
 
                                                //   an integer from 0 to 15
 
        .DLL_FREQUENCY_MODE("LOW"),             // HIGH or LOW frequency mode for DLL
 
        .DUTY_CYCLE_CORRECTION("TRUE"),         // Duty cycle correction, TRUE or FALSE
 
        .PHASE_SHIFT(0),                         // Amount of fixed phase shift from -255 to 255
 
        .STARTUP_WAIT("FALSE")                  // Delay configuration DONE until DCM LOCK, TRUE/FALSE
 
) DCM_SP_inst (
 
        .CLK0(CLK0_BUF),                        // 0 degree DCM CLK output
 
        .CLK180(),                              // 180 degree DCM CLK output
 
        .CLK270(),                              // 270 degree DCM CLK output
 
        .CLK2X(),                               // 2X DCM CLK output
 
        .CLK2X180(),                            // 2X, 180 degree DCM CLK out
 
        .CLK90(),                               // 90 degree DCM CLK output
 
        .CLKDV(CLKDV_BUF),                      // Divided DCM CLK out (CLKDV_DIVIDE)
 
        .CLKFX(),                               // DCM CLK synthesis out (M/D)
 
        .CLKFX180(),                            // 180 degree CLK synthesis out
 
        .LOCKED(),                              // DCM LOCK status output
 
        .PSDONE(),                              // Dynamic phase adjust done output
 
        .STATUS(),                              // 8-bit DCM status bits output
 
        .CLKFB(CLKFB_IN),                       // DCM clock feedback
 
        .CLKIN(CLKIN_IBUFG),                    // Clock input (from IBUFG, BUFG or DCM)
 
        .PSCLK(1'b0),                           // Dynamic phase adjust clock input
 
        .PSEN(1'b0),                            // Dynamic phase adjust enable input
 
        .PSINCDEC(1'b0),                        // Dynamic phase adjust increment/decrement
 
        .RST(1'b0)                              // DCM asynchronous reset input
 
);
 
 
 
`elsif MINSOC_DCM_ADV
 
 
 
DCM_ADV #(
 
        .CLKDV_DIVIDE(divisor),                 // Divide by: 1.5,2.0,2.5,3.0,3.5,4.0,4.5,5.0,5.5,6.0,6.5
 
                                                //   7.0,7.5,8.0,9.0,10.0,11.0,12.0,13.0,14.0,15.0 or 16.0
 
        .CLKFX_DIVIDE(1),                       // Can be any integer from 1 to 32
 
        .CLKFX_MULTIPLY(4),                     // Can be any integer from 2 to 32
 
        .CLKIN_DIVIDE_BY_2("FALSE"),            // TRUE/FALSE to enable CLKIN divide by two feature
 
        .CLKIN_PERIOD(10.0),                    // Specify period of input clock in ns from 1.25 to 1000.00
 
        .CLKOUT_PHASE_SHIFT("NONE"),            // Specify phase shift mode of NONE, FIXED,
 
                                                // VARIABLE_POSITIVE, VARIABLE_CENTER or DIRECT
 
        .CLK_FEEDBACK("1X"),                    // Specify clock feedback of NONE, 1X or 2X
 
        .DCM_AUTOCALIBRATION("TRUE"),           // DCM calibration circuitry "TRUE"/"FALSE"
 
        .DCM_PERFORMANCE_MODE("MAX_SPEED"),     // Can be MAX_SPEED or MAX_RANGE
 
        .DESKEW_ADJUST("SYSTEM_SYNCHRONOUS"),   // SOURCE_SYNCHRONOUS, SYSTEM_SYNCHRONOUS or
 
                                                //   an integer from 0 to 15
 
        .DFS_FREQUENCY_MODE("LOW"),             // HIGH or LOW frequency mode for frequency synthesis
 
        .DLL_FREQUENCY_MODE("LOW"),             // LOW, HIGH, or HIGH_SER frequency mode for DLL
 
        .DUTY_CYCLE_CORRECTION("TRUE"),         // Duty cycle correction, "TRUE"/"FALSE"
 
        .FACTORY_JF(16'hf0f0),                  // FACTORY JF value suggested to be set to 16’hf0f0
 
        .PHASE_SHIFT(0),                         // Amount of fixed phase shift from -255 to 1023
 
        .SIM_DEVICE(`MINSOC_DCM_COMPONENT),     // Set target device, "VIRTEX4" or "VIRTEX5"
 
        .STARTUP_WAIT("FALSE")                  // Delay configuration DONE until DCM LOCK, "TRUE"/"FALSE"
 
) DCM_ADV_inst (
 
        .CLK0(CLK0_BUF),                        // 0 degree DCM CLK output
 
        .CLK180(),                              // 180 degree DCM CLK output
 
        .CLK270(),                              // 270 degree DCM CLK output
 
        .CLK2X(),                               // 2X DCM CLK output
 
        .CLK2X180(),                            // 2X, 180 degree DCM CLK out
 
        .CLK90(),                               // 90 degree DCM CLK output
 
        .CLKDV(CLKDV_BUF),                      // Divided DCM CLK out (CLKDV_DIVIDE)
 
        .CLKFX(),                               // DCM CLK synthesis out (M/D)
 
        .CLKFX180(),                            // 180 degree CLK synthesis out
 
        .DO(),                                  // 16-bit data output for Dynamic Reconfiguration Port (DRP)
 
        .DRDY(),                                // Ready output signal from the DRP
 
        .LOCKED(),                              // DCM LOCK status output
 
        .PSDONE(),                              // Dynamic phase adjust done output
 
        .CLKFB(CLKFB_IN),                       // DCM clock feedback
 
        .CLKIN(CLKIN_IBUFG),                    // Clock input (from IBUFG, BUFG or DCM)
 
        .DADDR(7'h00),                          // 7-bit address for the DRP
 
        .DCLK(1'b0),                            // Clock for the DRP
 
        .DEN(1'b0),                             // Enable input for the DRP
 
        .DI(16'h0000),                          // 16-bit data input for the DRP
 
        .DWE(1'b0),                             // Active high allows for writing configuration memory
 
        .PSCLK(1'b0),                           // Dynamic phase adjust clock input
 
        .PSEN(1'b0),                            // Dynamic phase adjust enable input
 
        .PSINCDEC(1'b0),                        // Dynamic phase adjust increment/decrement
 
        .RST(1'b0)                              // DCM asynchronous reset input
 
);
);
 
 
`endif  // !MINSOC_DLL/MINSOC_DCM/MINSOC_DCM_SP/MINSOC_DCM_ADV
 
`endif  // !ALTERA_FPGA/XILINX_FPGA
`endif  // !ALTERA_FPGA/XILINX_FPGA
`endif  // !NO_CLOCK_DIVISION/GENERIC_CLOCK_DIVISION/FPGA_CLOCK_DIVISION
`endif  // !NO_CLOCK_DIVISION/GENERIC_CLOCK_DIVISION/FPGA_CLOCK_DIVISION
 
 
 
 
endmodule
endmodule

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.