OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [trunk/] [sw/] [eth/] [eth.c] - Diff between revs 2 and 36

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 2 Rev 36
Line 1... Line 1...
#include "../support/support.h"
#include "../support/support.h"
#include "../support/board.h"
#include "../support/board.h"
#include "../support/uart.h"
 
 
 
#include "../support/spr_defs.h"
#include "../support/spr_defs.h"
 
 
#include "eth.h"
#include "../drivers/uart.h"
 
#include "../drivers/eth.h"
 
 
void uart_print_str(char *);
 
void uart_print_long(unsigned long);
 
 
 
// Dummy or32 except vectors
extern int eth_rx_len;
void buserr_except(){}
extern int eth_rx_done, eth_tx_done;
void dpf_except(){}
extern unsigned char * eth_rx_data;
void ipf_except(){}
extern unsigned char * eth_tx_data;
void lpint_except(){}
 
void align_except(){}
 
void illegal_except(){}
 
/*void hpint_except(){
 
 
 
}*/
 
void dtlbmiss_except(){}
 
void itlbmiss_except(){}
 
void range_except(){}
 
void syscall_except(){}
 
void res1_except(){}
 
void trap_except(){}
 
void res2_except(){}
 
 
 
 
 
void uart_interrupt()
 
{
 
    char lala;
 
    unsigned char interrupt_id;
 
    interrupt_id = REG8(UART_BASE + UART_IIR);
 
    if ( interrupt_id & UART_IIR_RDI )
 
    {
 
        lala = uart_getc();
 
        uart_putc(lala+1);
 
    }
 
 
 
}
 
 
 
 
 
void uart_print_str(char *p)
 
{
 
        while(*p != 0) {
 
                uart_putc(*p);
 
                p++;
 
        }
 
}
 
 
 
void uart_print_long(unsigned long ul)
 
{
 
  int i;
 
  char c;
 
 
 
 
 
  uart_print_str("0x");
 
  for(i=0; i<8; i++) {
 
 
 
  c = (char) (ul>>((7-i)*4)) & 0xf;
 
  if(c >= 0x0 && c<=0x9)
 
    c += '0';
 
  else
 
    c += 'a' - 10;
 
  uart_putc(c);
 
  }
 
 
 
}
 
 
 
void uart_print_short(unsigned long ul)
 
{
 
  int i;
 
  char c;
 
  char flag=0;
 
 
 
 
 
  uart_print_str("0x");
 
  for(i=0; i<8; i++) {
 
 
 
  c = (char) (ul>>((7-i)*4)) & 0xf;
 
  if(c >= 0x0 && c<=0x9)
 
    c += '0';
 
  else
 
    c += 'a' - 10;
 
  if ((c != '0') || (i==7))
 
    flag=1;
 
  if(flag)
 
    uart_putc(c);
 
  }
 
 
 
}
 
 
 
int tx_done;
 
int rx_done;
 
int rx_len;
 
char tx_data[1536];     //max length
 
char rx_data[1536];
 
 
 
void eth_init()
 
{
 
        //TXEN & RXEN = 1; PAD & CRC = 1; FULLD = 1
 
        REG32(ETH_BASE + ETH_MODER) = ETH_TXEN | ETH_RXEN | ETH_PAD | ETH_CRCEN | ETH_FULLD;
 
        //PHY Address = 0x001
 
        REG32(ETH_BASE + ETH_MIIADDRESS) = 0x00000001;
 
 
 
        //enable all interrupts
 
        REG32(ETH_BASE + ETH_INT_MASK) = ETH_RXC | ETH_TXC | ETH_BUSY | ETH_RXE | ETH_RXB | ETH_TXE | ETH_TXB;
 
 
 
        //set MAC ADDRESS
 
        REG32(ETH_BASE + ETH_MAC_ADDR1) = OWN_MAC_ADDRESS >> 32;        //low word = mac address high word
 
        REG32(ETH_BASE + ETH_MAC_ADDR0) = OWN_MAC_ADDRESS;              //mac address rest
 
 
 
        //configure TXBD0
 
        REG32(ETH_BASE + ETH_TXBD0H) = tx_data;         //address used for tx_data
 
        REG32(ETH_BASE + ETH_TXBD0L) = TX_READY;        //length = 0 | PAD & CRC = 1 | IRQ & WR = 1
 
 
 
        //configure RXBD0
 
        REG32(ETH_BASE + ETH_RXBD0H) = rx_data;         //address used for tx_data
 
        REG32(ETH_BASE + ETH_RXBD0L) = RX_READY;        //len = 0 | IRQ & WR = 1 | EMPTY = 1
 
 
 
        //set txdata
 
        tx_data[0] = BROADCAST_ADDRESS >> 40;
 
        tx_data[1] = BROADCAST_ADDRESS >> 32;
 
        tx_data[2] = BROADCAST_ADDRESS >> 24;
 
        tx_data[3] = BROADCAST_ADDRESS >> 16;
 
        tx_data[4] = BROADCAST_ADDRESS >> 8;
 
        tx_data[5] = BROADCAST_ADDRESS;
 
 
 
        tx_data[6] = OWN_MAC_ADDRESS >> 40;
 
        tx_data[7] = OWN_MAC_ADDRESS >> 32;
 
        tx_data[8] = OWN_MAC_ADDRESS >> 24;
 
        tx_data[9] = OWN_MAC_ADDRESS >> 16;
 
        tx_data[10] = OWN_MAC_ADDRESS >> 8;
 
        tx_data[11] = OWN_MAC_ADDRESS;
 
 
 
        //erase interrupts
 
        REG32(ETH_BASE + ETH_INT_SOURCE) = ETH_RXC | ETH_TXC | ETH_BUSY | ETH_RXE | ETH_RXB | ETH_TXE | ETH_TXB;
 
 
 
    tx_done = 1;
 
    rx_done = 0;
 
    rx_len = 0;
 
}
 
 
 
void eth_send(int length)
 
{
 
    if (!tx_done)
 
        return;
 
 
 
    tx_done = 0;
 
        tx_data[12] = length >> 8;
 
        tx_data[13] = length;
 
 
 
        REG32(ETH_BASE + ETH_TXBD0L) = (( 0x0000FFFF & ( length + HDR_LEN ) ) << 16) | BD_SND;
 
}
 
 
 
void eth_receive()
void eth_receive()
{
{
    int i;
    int i;
    uart_print_str("Length: \n");
    uart_print_str("Length: \n");
    uart_print_long(rx_len - HDR_LEN - CRC_LEN);
    uart_print_long(eth_rx_len);
    uart_print_str("\n");
    uart_print_str("\n");
    uart_print_str("Data: \n");
    uart_print_str("Data: \n");
    for ( i = 0; i < rx_len - HDR_LEN - CRC_LEN; i++ )
    for ( i = 0; i < eth_rx_len; i++ )
    {
 
        uart_print_short(rx_data[i+HDR_LEN]);
 
//        uart_print_str("\n");
 
    }
 
 
 
    rx_done = 0;
 
    rx_len = 0;
 
}
 
 
 
void eth_interrupt()
 
{
{
    unsigned long source = REG32(ETH_BASE + ETH_INT_SOURCE);
        uart_print_short(eth_rx_data[i]);
    switch (source)
        uart_print_str("\n");
    {
 
        case ETH_TXB:
 
            tx_done = 1;
 
            //erase interrupt
 
            REG32(ETH_BASE + ETH_INT_SOURCE) |= ETH_TXB;
 
            break;
 
 
 
        case ETH_RXB:
 
            rx_done = 1;
 
            //erase interrupt
 
            REG32(ETH_BASE + ETH_INT_SOURCE) |= ETH_RXB;
 
            //accept further data (reset RXBD to empty)
 
            rx_len = (REG32(ETH_BASE + ETH_RXBD0L) >> 16);
 
            REG32(ETH_BASE + ETH_RXBD0L) = RX_READY;    //len = 0 | IRQ & WR = 1 | EMPTY = 1
 
            break;
 
 
 
        default:
 
            break;
 
    }
    }
 
    eth_recv_ack();
}
}
 
 
int main()
int main()
{
{
    unsigned long lalala;
    unsigned long lalala;
        uart_init();
        uart_init();
 
 
        int_init();
        int_init();
 
        eth_init();
        int_add(UART_IRQ, &uart_interrupt);
        int_add(UART_IRQ, &uart_interrupt);
        int_add(ETH_IRQ, &eth_interrupt);
        int_add(ETH_IRQ, &eth_interrupt);
 
 
        /* We can't use printf because in this simple example
        /* We can't use printf because in this simple example
           we don't link C library. */
           we don't link C library. */
        uart_print_str("Hello World.\n\r");
        uart_print_str("Hello World.\n\r");
 
 
        eth_init();
        eth_tx_data[0] = 0xFF;
 
        eth_tx_data[1] = 0x2B;
        tx_data[14] = 0xFF;
        eth_tx_data[2] = 0x40;
        tx_data[15] = 0x2B;
        eth_tx_data[3] = 0x50;
        tx_data[16] = 0x40;
 
        tx_data[17] = 0x50;
 
 
 
        eth_send(4);
        eth_send(4);
 
 
    while(1)
    while(1)
    {
    {
        if (rx_done)
        if (eth_rx_done)
        {
        {
            eth_receive();
            eth_receive();
        }
        }
    }
    }
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.