Subversion Repositories minsoc

MINSOC = ../

MINSOC = ../

MINSOC_DEFINES = ${MINSOC}/backend

MINSOC_DEFINES = ${MINSOC}/backend

MINSOC_RTL = ${MINSOC}/rtl/verilog

MINSOC_RTL = ${MINSOC}/rtl/verilog

MINSOC_STARTUP_RTL = ${MINSOC_RTL}/minsoc_startup

MINSOC_STARTUP_RTL = ${MINSOC_RTL}/minsoc_startup

UART_RTL = ${MINSOC_RTL}/uart16550/rtl/verilog

UART_RTL = ${MINSOC_RTL}/uart16550/rtl/verilog

ADV_DEBUG_ROOT = ${MINSOC_RTL}/adv_debug_sys/Hardware

ADV_DEBUG_ROOT = ${MINSOC_RTL}/adv_debug_sys/Hardware

DEBUG_RTL = ${ADV_DEBUG_ROOT}/adv_dbg_if/rtl/verilog

DEBUG_RTL = ${ADV_DEBUG_ROOT}/adv_dbg_if/rtl/verilog

OR1200_RTL = ${MINSOC_RTL}/or1200/rtl/verilog

OR1200_RTL = ${MINSOC_RTL}/or1200/rtl/verilog

ETH_RTL = ${MINSOC_RTL}/ethmac/rtl/verilog

ETH_RTL = ${MINSOC_RTL}/ethmac/rtl/verilog

BUILD_SUPPORT = $(MINSOC)/syn/buildSupport

BUILD_SUPPORT = $(MINSOC)/syn/buildSupport

help:

help:

        @echo "  all: Synthesize and implement the SoC, then generate a bit stream"

        @echo "  all: Synthesize and implement the SoC, then generate a bit stream"

        @echo ""

        @echo ""

        @echo "  soc: Synthesize the SoC"

        @echo "  soc: Synthesize the SoC"

        @echo "  translate: Convert the SoC's ngc file to an ngd file for mapping"

        @echo "  translate: Convert the SoC's ngc file to an ngd file for mapping"

        @echo "  map: Express the SoC netlist in the target hardware"

        @echo "  map: Express the SoC netlist in the target hardware"

        @echo "  par: Place the target hardware, then route the wires"

        @echo "  par: Place the target hardware, then route the wires"

        @echo "  bitgen: Generate a programming file for the target FPGA"

        @echo "  bitgen: Generate a programming file for the target FPGA"

        @echo ""

        @echo ""

        @echo "  modules: Synthesize OR1200 processor, debug interface, UART and Ethernet controllers"

        @echo "  modules: Synthesize OR1200 processor, debug interface, UART and Ethernet controllers"

        @echo "  or1200: Synthesize the OR1200 processor"

        @echo "  or1200: Synthesize the OR1200 processor"

        @echo "  debug: Synthesize the debug interface"

        @echo "  debug: Synthesize the debug interface"

        @echo "  uart: Synthesize the UART"

        @echo "  uart: Synthesize the UART"

        @echo "  eth: Synthesize the Ethernet controller"

        @echo "  eth: Synthesize the Ethernet controller"

        @echo ""

        @echo ""

        @echo "  clean: Delete all superfluous files generated by Xilinx tools"

        @echo "  clean: Delete all superfluous files generated by Xilinx tools"

        @echo "  distclean: Delete all generated files"

        @echo "  distclean: Delete all generated files"

all: minsoc.bit

all: minsoc.bit

soc: minsoc_top.ngc

soc: minsoc_top.ngc

translate: minsoc.ngd

translate: minsoc.ngd

map: minsoc.ncd

map: minsoc.ncd

par: minsoc_par.ncd

par: minsoc_par.ncd

bitgen: minsoc.bit

bitgen: minsoc.bit

modules: or1200 debug uart eth

modules: or1200 debug uart eth

MODULES = or1200_top.ngc adbg_top.ngc uart_top.ngc ethmac.ngc

MODULES = or1200_top.ngc adbg_top.ngc uart_top.ngc ethmac.ngc

prepare:

prepare:

        rm -rf xst

        rm -rf xst

        mkdir xst

        mkdir xst

clean:

clean:

        rm -rf _xmsgs xst xlnx_auto_0_xdb

        rm -rf _xmsgs xst xlnx_auto_0_xdb

        rm -rf *.xst *.xrpt *.srp *.lso *.log *.bld *.lst *.twr *.ise *.map *.mrp *.ngm *.pcf *.psr *.xml *.pad *.par *.ptwx *.bgn *.unroutes *.xpi minsoc_par_pad* *.xwbt *.html

        rm -rf *.xst *.xrpt *.srp *.lso *.log *.bld *.lst *.twr *.ise *.map *.mrp *.ngm *.pcf *.psr *.xml *.pad *.par *.ptwx *.bgn *.unroutes *.xpi minsoc_par_pad* *.xwbt *.html

distclean:

distclean:

        rm -rf *.ngc *.ncd *.ngd *.bit

        rm -rf *.ngc *.ncd *.ngd *.bit

        make clean

        make clean

        make prepare

        make prepare

        xst -ifn "$(BUILD_SUPPORT)/minsoc_top.xst"

        xst -ifn "$(BUILD_SUPPORT)/minsoc_top.xst"

uart: uart_top.ngc

uart: uart_top.ngc

        make prepare

        make prepare

        xst -ifn "$(BUILD_SUPPORT)/uart_top.xst"

        xst -ifn "$(BUILD_SUPPORT)/uart_top.xst"

eth: ethmac.ngc

eth: ethmac.ngc

        make prepare

        make prepare

        xst -ifn "$(BUILD_SUPPORT)/ethmac.xst"

        xst -ifn "$(BUILD_SUPPORT)/ethmac.xst"

debug: adbg_top.ngc

debug: adbg_top.ngc

        make prepare

        make prepare

        xst -ifn "$(BUILD_SUPPORT)/adbg_top.xst"

        xst -ifn "$(BUILD_SUPPORT)/adbg_top.xst"

or1200: or1200_top.ngc

or1200: or1200_top.ngc

        make prepare

        make prepare

        xst -ifn "$(BUILD_SUPPORT)/or1200_top.xst"

        xst -ifn "$(BUILD_SUPPORT)/or1200_top.xst"

minsoc.ngd: ${MINSOC}/backend/CONSTRAINT_FILE minsoc_top.ngc $(MODULES)

minsoc.ngd: ${MINSOC}/backend/CONSTRAINT_FILE minsoc_top.ngc $(MODULES)

        ngdbuild -p DEVICE_PART -uc ${MINSOC}/backend/CONSTRAINT_FILE -aul minsoc_top.ngc minsoc.ngd

        ngdbuild -p DEVICE_PART -uc ${MINSOC}/backend/CONSTRAINT_FILE -aul minsoc_top.ngc minsoc.ngd

minsoc.ncd: minsoc.ngd

minsoc.ncd: minsoc.ngd

        map -bp -timing -cm speed -equivalent_register_removal on -logic_opt on -ol high -power off -register_duplication on -retiming on -w -xe n minsoc.ngd

        map -bp -timing -cm speed -equivalent_register_removal on -logic_opt on -ol high -power off -register_duplication on -retiming on -w -xe n minsoc.ngd

minsoc_par.ncd: minsoc.ncd

minsoc_par.ncd: minsoc.ncd

        par -ol high -w -xe n minsoc.ncd minsoc_par.ncd

        par -ol high -w -xe n minsoc.ncd minsoc_par.ncd

minsoc.bit: minsoc_par.ncd

minsoc.bit: minsoc_par.ncd

        bitgen -d -w minsoc_par.ncd minsoc.bit

        bitgen -d -w minsoc_par.ncd minsoc.bit