OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [trunk/] [utils/] [setup/] [minsoc-install.sh] - Diff between revs 166 and 167

Go to most recent revision | Only display areas with differences | Details | Blame | View Log

Rev 166 Rev 167
#!/bin/bash
#!/bin/bash
# Author: Constantinos Xanthopoulos & Raul Fajardo
# Author: Constantinos Xanthopoulos & Raul Fajardo
# This script install MinSOC tree
# This script install MinSOC tree
# under a specific directory.
# under a specific directory.
 
 
# ===== CONFIGURATIONS =====
# ===== CONFIGURATIONS =====
# ==========================
# ==========================
MINSOC_SVN_URL=http://opencores.org/ocsvn/minsoc/minsoc/trunk
MINSOC_SVN_URL=http://opencores.org/ocsvn/minsoc/minsoc/trunk
export SCRIPT_DIR="$( cd -P "$( dirname "$0" )" && pwd )"
export SCRIPT_DIR="$( cd -P "$( dirname "$0" )" && pwd )"
export DIR_TO_INSTALL=`pwd`
export DIR_TO_INSTALL=`pwd`
 
 
# Debug ?
# Debug ?
export DEBUG=0;
export DEBUG=0;
. ${SCRIPT_DIR}/beautify.sh
. ${SCRIPT_DIR}/beautify.sh
 
 
function testtool
function testtool
{
{
    #    is_missing=`which $1 2>&1 | grep no`
    #    is_missing=`which $1 2>&1 | grep no`
    is_missing=`whereis -b $1 2>&1 | grep :$`
    is_missing=`whereis -b $1 2>&1 | grep :$`
    if [ -z "$is_missing" ]
    if [ -z "$is_missing" ]
    then
    then
        cecho "$1 is installed, pass"
        cecho "$1 is installed, pass"
    else
    else
        errormsg "$1 is not installed, install it and re-run this installation script."
        errormsg "$1 is not installed, install it and re-run this installation script."
    fi
    fi
}
}
 
 
 
 
#Setting environment
#Setting environment
ENV=`uname -o`
ENV=`uname -o`
if [ "$ENV" != "GNU/Linux" ] && [ "$ENV" != "Cygwin" ]
if [ "$ENV" != "GNU/Linux" ] && [ "$ENV" != "Cygwin" ]
then
then
    errormsg "Environment $ENV not supported by this script."
    errormsg "Environment $ENV not supported by this script."
fi
fi
cecho "Building tools for ${ENV} system"
cecho "Building tools for ${ENV} system"
 
 
is_arch64=`uname -m | grep 64`
is_arch64=`uname -m | grep 64`
if [ -z $is_arch64 ]
if [ -z $is_arch64 ]
then
then
    KERNEL_ARCH="32"
    KERNEL_ARCH="32"
else
else
    KERNEL_ARCH="64"
    KERNEL_ARCH="64"
fi
fi
 
 
 
 
# User check!
# User check!
if [ `whoami` = "root" ];
if [ `whoami` = "root" ];
then
then
    errormsg "You shouldn't be root for this script to run.";
    errormsg "You shouldn't be root for this script to run.";
fi;
fi;
 
 
 
 
# Testing necessary tools
# Testing necessary tools
cecho "Testing if necessary tools are installed, program "whereis" is required."
cecho "Testing if necessary tools are installed, program "whereis" is required."
testtool wget
testtool wget
testtool svn
testtool svn
testtool bzip2
testtool bzip2
testtool tar
testtool tar
testtool sed
testtool sed
testtool patch
testtool patch
testtool gcc
testtool gcc
testtool make
testtool make
testtool makeinfo
testtool makeinfo
testtool libncurses
testtool libncurses
testtool flex
testtool flex
testtool bison
testtool bison
testtool libz
testtool libz
if [ "$ENV" == "Cygwin" ]
if [ "$ENV" == "Cygwin" ]
then
then
    testtool ioperm
    testtool ioperm
    testtool libusb
    testtool libusb
fi
fi
 
 
 
 
# Wizard
# Wizard
if [ -z "${ALTDIR}" ]
if [ -z "${ALTDIR}" ]
then
then
    cnecho "Give full path (ex. /home/foo/) for installation directory or leave empty for "${DIR_TO_INSTALL}": ";
    cnecho "Give full path (ex. /home/foo/) for installation directory or leave empty for "${DIR_TO_INSTALL}": ";
    read ALTDIR;
    read ALTDIR;
    if [ ! -z "${ALTDIR}" ]
    if [ ! -z "${ALTDIR}" ]
    then
    then
        DIR_TO_INSTALL=${ALTDIR}
        DIR_TO_INSTALL=${ALTDIR}
    fi
    fi
    cecho "${DIR_TO_INSTALL} selected";
    cecho "${DIR_TO_INSTALL} selected";
fi
fi
 
 
if [ ! -d ${DIR_TO_INSTALL} ]
if [ ! -d ${DIR_TO_INSTALL} ]
then
then
     cecho "Directory ${DIR_TO_INSTALL} doesn't exist."
     cecho "Directory ${DIR_TO_INSTALL} doesn't exist."
     execcmd "Creating directory ${DIR_TO_INSTALL}" "mkdir -p ${DIR_TO_INSTALL}"
     execcmd "Creating directory ${DIR_TO_INSTALL}" "mkdir -p ${DIR_TO_INSTALL}"
     if [ $? -ne 0 ]
     if [ $? -ne 0 ]
     then
     then
          errormsg "Connot create ${DIR_TO_INSTALL}";
          errormsg "Connot create ${DIR_TO_INSTALL}";
     fi
     fi
fi;
fi;
 
 
 
 
#Creating directory structure
#Creating directory structure
cecho "\nCreating directory structure"
cecho "\nCreating directory structure"
cd ${DIR_TO_INSTALL}
cd ${DIR_TO_INSTALL}
execcmd "Creating directory ./download for downloaded packages" "mkdir -p download"
execcmd "Creating directory ./download for downloaded packages" "mkdir -p download"
execcmd "Creating directory ./tools for package binaries" "mkdir -p tools"
execcmd "Creating directory ./tools for package binaries" "mkdir -p tools"
 
 
 
 
#Downloading everything we need
#Downloading everything we need
cecho "\nDownloading packages"
cecho "\nDownloading packages"
cd ${DIR_TO_INSTALL}
cd ${DIR_TO_INSTALL}
cecho "Download MinSoC"
cecho "Download MinSoC"
svn co -q ${MINSOC_SVN_URL} minsoc      #user need to input password, execcmd omits command output and should be this way
svn co -q ${MINSOC_SVN_URL} minsoc      #user need to input password, execcmd omits command output and should be this way
execcmd "cd ${DIR_TO_INSTALL}/download"
execcmd "cd ${DIR_TO_INSTALL}/download"
if [ "$ENV" == "Cygwin" ]
if [ "$ENV" == "Cygwin" ]
then
then
    execcmd "Downloading GNU Toolchain" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-cygwin-1.7.tar.bz2";
    execcmd "Downloading GNU Toolchain" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-cygwin-1.7.tar.bz2";
else
else
    if [ $KERNEL_ARCH == "32" ];
    if [ $KERNEL_ARCH == "32" ];
    then
    then
        execcmd "Downloading GNU Toolchain" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86.tar.bz2";
        execcmd "Downloading GNU Toolchain" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86.tar.bz2";
    elif [ $KERNEL_ARCH == "64" ];
    elif [ $KERNEL_ARCH == "64" ];
    then
    then
        execcmd "Downloading GNU Toolchain" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86_64.tar.bz2";
        execcmd "Downloading GNU Toolchain" "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-elf-linux-x86_64.tar.bz2";
    fi
    fi
fi
fi
execcmd "Downloading GDB" "wget ftp://anonymous:anonymous@ftp.gnu.org/gnu/gdb/gdb-6.8a.tar.bz2"
execcmd "Downloading GDB" "wget ftp://anonymous:anonymous@ftp.gnu.org/gnu/gdb/gdb-6.8a.tar.bz2"
execcmd "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-gdb-6.8-patch-2.4.bz2"
execcmd "wget ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/or32-gdb-6.8-patch-2.4.bz2"
execcmd "svn export -q http://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk/Patches/GDB6.8/gdb-6.8-bz436037-reg-no-longer-active.patch"
execcmd "svn export -q http://opencores.org/ocsvn/adv_debug_sys/adv_debug_sys/trunk/Patches/GDB6.8/gdb-6.8-bz436037-reg-no-longer-active.patch"
if [ "$ENV" != "Cygwin" ]
if [ "$ENV" != "Cygwin" ]
then
then
    execcmd "Downloading libusb-0.1 for Advanced Debug System" "wget http://sourceforge.net/projects/libusb/files/libusb-0.1%20%28LEGACY%29/0.1.12/libusb-0.1.12.tar.gz"
    execcmd "Downloading libusb-0.1 for Advanced Debug System" "wget http://sourceforge.net/projects/libusb/files/libusb-0.1%20%28LEGACY%29/0.1.12/libusb-0.1.12.tar.gz"
fi
fi
execcmd "Downloading libftdi for Advanced Debug System" "wget http://www.intra2net.com/en/developer/libftdi/download/libftdi-0.19.tar.gz"
execcmd "Downloading libftdi for Advanced Debug System" "wget http://www.intra2net.com/en/developer/libftdi/download/libftdi-0.19.tar.gz"
execcmd "Downloading Icarus Verilog" "wget ftp://icarus.com/pub/eda/verilog/v0.9/verilog-0.9.4.tar.gz"
execcmd "Downloading Icarus Verilog" "wget ftp://icarus.com/pub/eda/verilog/v0.9/verilog-0.9.4.tar.gz"
 
 
 
 
#Uncompressing everything
#Uncompressing everything
cecho "\nUncompressing packages"
cecho "\nUncompressing packages"
if [ "$ENV" == "Cygwin" ]
if [ "$ENV" == "Cygwin" ]
then
then
    execcmd "tar xf or32-elf-cygwin-1.7.tar.bz2";
    execcmd "tar xf or32-elf-cygwin-1.7.tar.bz2";
else
else
    if [ $KERNEL_ARCH == "32" ];
    if [ $KERNEL_ARCH == "32" ];
    then
    then
        execcmd "tar xf or32-elf-linux-x86.tar.bz2";
        execcmd "tar xf or32-elf-linux-x86.tar.bz2";
    elif [ $KERNEL_ARCH == "64" ];
    elif [ $KERNEL_ARCH == "64" ];
    then
    then
        execcmd "tar xf or32-elf-linux-x86_64.tar.bz2";
        execcmd "tar xf or32-elf-linux-x86_64.tar.bz2";
    fi
    fi
fi
fi
execcmd "tar -jxf gdb-6.8a.tar.bz2"
execcmd "tar -jxf gdb-6.8a.tar.bz2"
execcmd "bzip2 -d or32-gdb-6.8-patch-2.4.bz2"
execcmd "bzip2 -d or32-gdb-6.8-patch-2.4.bz2"
if [ "$ENV" != "Cygwin" ]
if [ "$ENV" != "Cygwin" ]
then
then
    execcmd "tar zxf libusb-0.1.12.tar.gz"
    execcmd "tar zxf libusb-0.1.12.tar.gz"
fi
fi
execcmd "tar zxf libftdi-0.19.tar.gz"
execcmd "tar zxf libftdi-0.19.tar.gz"
execcmd "tar zxf verilog-0.9.4.tar.gz"
execcmd "tar zxf verilog-0.9.4.tar.gz"
 
 
 
 
#Compiling and Installing all packages
#Compiling and Installing all packages
cecho "\nCompiling and installing packages"
cecho "\nCompiling and installing packages"
# Installing the GNU Toolchain
# Installing the GNU Toolchain
if [ "$ENV" == "Cygwin" ]
if [ "$ENV" == "Cygwin" ]
then
then
    execcmd "Installing GNU Toolchain" "tar xf or32-elf-cygwin-1.7.tar.bz2 -C $DIR_TO_INSTALL/tools";
    execcmd "Installing GNU Toolchain" "tar xf or32-elf-cygwin-1.7.tar.bz2 -C $DIR_TO_INSTALL/tools";
else
else
    if [ $KERNEL_ARCH == "32" ];
    if [ $KERNEL_ARCH == "32" ];
    then
    then
        execcmd "Installing GNU Toolchain" "tar xf or32-elf-linux-x86.tar.bz2 -C $DIR_TO_INSTALL/tools";
        execcmd "Installing GNU Toolchain" "tar xf or32-elf-linux-x86.tar.bz2 -C $DIR_TO_INSTALL/tools";
    elif [ $KERNEL_ARCH == "64" ];
    elif [ $KERNEL_ARCH == "64" ];
    then
    then
        execcmd "Installing GNU Toolchain" "tar xf or32-elf-linux-x86_64.tar.bz2 -C $DIR_TO_INSTALL/tools";
        execcmd "Installing GNU Toolchain" "tar xf or32-elf-linux-x86_64.tar.bz2 -C $DIR_TO_INSTALL/tools";
    fi
    fi
fi
fi
PATH=$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin
PATH="$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin"
 
 
 
 
#Installing GDB
#Installing GDB
execcmd "cd gdb-6.8"
execcmd "cd gdb-6.8"
execcmd "patch -p1 < ../or32-gdb-6.8-patch-2.4"
execcmd "patch -p1 < ../or32-gdb-6.8-patch-2.4"
execcmd "patch -p1 < ../gdb-6.8-bz436037-reg-no-longer-active.patch"
execcmd "patch -p1 < ../gdb-6.8-bz436037-reg-no-longer-active.patch"
 
 
execcmd "mkdir -p build"
execcmd "mkdir -p build"
execcmd "cd build"
execcmd "cd build"
execcmd "../configure --target=or32-elf --disable-werror --prefix=$DIR_TO_INSTALL/tools"
execcmd "../configure --target=or32-elf --disable-werror --prefix=$DIR_TO_INSTALL/tools"
execcmd "Compiling GDB" "make"
execcmd "Compiling GDB" "make"
make install 1>>${SCRIPT_DIR}/progress.log 2>>${SCRIPT_DIR}/error.log   #avoid Fedora failing due to missing Makeinfo
make install 1>>${SCRIPT_DIR}/progress.log 2>>${SCRIPT_DIR}/error.log   #avoid Fedora failing due to missing Makeinfo
PATH=$PATH:${DIR_TO_INSTALL}/tools/bin
PATH="$PATH:${DIR_TO_INSTALL}/tools/bin"
 
 
 
 
#Installing Advanced JTAG Bridge support libraries
#Installing Advanced JTAG Bridge support libraries
if [ "$ENV" != "Cygwin" ]
if [ "$ENV" != "Cygwin" ]
then
then
    execcmd "cd ${DIR_TO_INSTALL}/download/libusb-0.1.12"
    execcmd "cd ${DIR_TO_INSTALL}/download/libusb-0.1.12"
    execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
    execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
    execcmd "Installing libusb-0.1" "make"
    execcmd "Installing libusb-0.1" "make"
    execcmd "make install"
    execcmd "make install"
fi
fi
 
 
execcmd "cd ${DIR_TO_INSTALL}/download/libftdi-0.19"
execcmd "cd ${DIR_TO_INSTALL}/download/libftdi-0.19"
execcmd "PATH=$PATH:${DIR_TO_INSTALL}/tools/bin ./configure --prefix=${DIR_TO_INSTALL}/tools CPPFLAGS=-I${DIR_TO_INSTALL}/tools/include"
execcmd "PATH=\"$PATH:${DIR_TO_INSTALL}/tools/bin\" ./configure --prefix=${DIR_TO_INSTALL}/tools CPPFLAGS=-I${DIR_TO_INSTALL}/tools/include"
execcmd "Compiling libftdi" "make"
execcmd "Compiling libftdi" "make"
execcmd "make install"
execcmd "make install"
 
 
 
 
#Installing Advanced JTAG Bridge
#Installing Advanced JTAG Bridge
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge"
execcmd "cd ${DIR_TO_INSTALL}/minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge"
execcmd "./autogen.sh"
execcmd "./autogen.sh"
execcmd "./configure --enable-jsp-server=yes --prefix=${DIR_TO_INSTALL}/tools CFLAGS=-I${DIR_TO_INSTALL}/tools/include LIBS=-L${DIR_TO_INSTALL}/tools/lib LDFLAGS=-Wl,-R${DIR_TO_INSTALL}/tools/lib"
execcmd "./configure --enable-jsp-server=yes --prefix=${DIR_TO_INSTALL}/tools CFLAGS=-I${DIR_TO_INSTALL}/tools/include LIBS=-L${DIR_TO_INSTALL}/tools/lib LDFLAGS=-Wl,-R${DIR_TO_INSTALL}/tools/lib"
execcmd "Compiling Advanced JTAG Bridge" "make"
execcmd "Compiling Advanced JTAG Bridge" "make"
execcmd "make install"
execcmd "make install"
 
 
 
 
#Installing Icarus Verilog
#Installing Icarus Verilog
execcmd "cd ${DIR_TO_INSTALL}/download/verilog-0.9.4"
execcmd "cd ${DIR_TO_INSTALL}/download/verilog-0.9.4"
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
execcmd "./configure --prefix=${DIR_TO_INSTALL}/tools"
execcmd "Compiling Icarus Verilog" "make"
execcmd "Compiling Icarus Verilog" "make"
execcmd "make install"
execcmd "make install"
 
 
 
 
#Configuring MinSoC, Advanced Debug System and patching OpenRISC
#Configuring MinSoC, Advanced Debug System and patching OpenRISC
bash ${SCRIPT_DIR}/configure.sh
bash ${SCRIPT_DIR}/configure.sh
 
 
 
 
#Setting-up new variables
#Setting-up new variables
cecho "\nSystem configurations"
cecho "\nSystem configurations"
execcmd "Adding MinSoC tools to PATH" "echo \"PATH=\\\$PATH:$DIR_TO_INSTALL/tools/bin\" >> /home/$(whoami)/.bashrc;";
execcmd "Adding MinSoC tools to PATH" "echo \"PATH=\\\"\\\$PATH:$DIR_TO_INSTALL/tools/bin\\\"\" >> /home/$(whoami)/.bashrc;";
execcmd "Adding OpenRISC toolchain to PATH" "echo \"PATH=\\\$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin/\" >> /home/$(whoami)/.bashrc;";
execcmd "Adding OpenRISC toolchain to PATH" "echo \"PATH=\\\"\\\$PATH:$DIR_TO_INSTALL/tools/or32-elf/bin/\\\"\" >> /home/$(whoami)/.bashrc;";
 
 
cecho "\nInstallation Complete!"
cecho "\nInstallation Complete!"
cecho "Before using the system, load the new environment variables doing this: source /home/$(whoami)/.bashrc"
cecho "Before using the system, load the new environment variables doing this: source /home/$(whoami)/.bashrc"
cecho "You may remove the ${DIR_TO_INSTALL}/download directory if you wish."
cecho "You may remove the ${DIR_TO_INSTALL}/download directory if you wish."
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2019 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.