/* ethernet.c -- Simulation of Ethernet MAC
|
/* ethernet.c -- Simulation of Ethernet MAC
|
|
|
Copyright (C) 2001 by Erez Volk, erez@opencores.org
|
Copyright (C) 2001 by Erez Volk, erez@opencores.org
|
Ivan Guzvinec, ivang@opencores.org
|
Ivan Guzvinec, ivang@opencores.org
|
Copyright (C) 2008, 2001 Embecosm Limited
|
Copyright (C) 2008, 2001 Embecosm Limited
|
Copyright (C) 2010 ORSoC
|
Copyright (C) 2010 ORSoC
|
|
|
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
|
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
|
Contributor Julius Baxter <julius@orsoc.se>
|
Contributor Julius Baxter <julius@orsoc.se>
|
|
|
This file is part of Or1ksim, the OpenRISC 1000 Architectural Simulator.
|
This file is part of Or1ksim, the OpenRISC 1000 Architectural Simulator.
|
|
|
This program is free software; you can redistribute it and/or modify it
|
This program is free software; you can redistribute it and/or modify it
|
under the terms of the GNU General Public License as published by the Free
|
under the terms of the GNU General Public License as published by the Free
|
Software Foundation; either version 3 of the License, or (at your option)
|
Software Foundation; either version 3 of the License, or (at your option)
|
any later version.
|
any later version.
|
|
|
This program is distributed in the hope that it will be useful, but WITHOUT
|
This program is distributed in the hope that it will be useful, but WITHOUT
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
more details.
|
more details.
|
|
|
You should have received a copy of the GNU General Public License along
|
You should have received a copy of the GNU General Public License along
|
with this program. If not, see <http://www.gnu.org/licenses/>. */
|
with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
/* This program is commented throughout in a fashion suitable for processing
|
/* This program is commented throughout in a fashion suitable for processing
|
with Doxygen. */
|
with Doxygen. */
|
|
|
|
|
/* Autoconf and/or portability configuration */
|
/* Autoconf and/or portability configuration */
|
#include "config.h"
|
#include "config.h"
|
#include "port.h"
|
#include "port.h"
|
|
|
/* System includes */
|
/* System includes */
|
#include <stdlib.h>
|
#include <stdlib.h>
|
#include <stdio.h>
|
#include <stdio.h>
|
|
|
#include <sys/socket.h>
|
#include <sys/socket.h>
|
#include <sys/ioctl.h>
|
#include <sys/ioctl.h>
|
#include <sys/stat.h>
|
#include <sys/stat.h>
|
#include <sys/types.h>
|
#include <sys/types.h>
|
#include <fcntl.h>
|
#include <fcntl.h>
|
|
|
#include <sys/poll.h>
|
#include <sys/poll.h>
|
#include <unistd.h>
|
#include <unistd.h>
|
#include <errno.h>
|
#include <errno.h>
|
|
|
#include <linux/if.h>
|
#include <linux/if.h>
|
#include <linux/if_tun.h>
|
#include <linux/if_tun.h>
|
|
|
/* Package includes */
|
/* Package includes */
|
#include "arch.h"
|
#include "arch.h"
|
#include "config.h"
|
#include "config.h"
|
#include "abstract.h"
|
#include "abstract.h"
|
#include "eth.h"
|
#include "eth.h"
|
#include "dma.h"
|
#include "dma.h"
|
#include "sim-config.h"
|
#include "sim-config.h"
|
#include "fields.h"
|
#include "fields.h"
|
#include "crc32.h"
|
#include "crc32.h"
|
#include "vapi.h"
|
#include "vapi.h"
|
#include "pic.h"
|
#include "pic.h"
|
#include "sched.h"
|
#include "sched.h"
|
#include "toplevel-support.h"
|
#include "toplevel-support.h"
|
#include "sim-cmd.h"
|
#include "sim-cmd.h"
|
|
|
|
|
/* Control debug messages */
|
/* Control debug messages */
|
|
#define ETH_DEBUG 0
|
#ifndef ETH_DEBUG
|
#ifndef ETH_DEBUG
|
# define ETH_DEBUG 1
|
# define ETH_DEBUG 1
|
#endif
|
#endif
|
|
|
|
|
|
/*! MAC address that is always accepted. */
|
|
static const unsigned char mac_broadcast[ETHER_ADDR_LEN] =
|
|
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
|
|
|
/* -------------------------------------------------------------------------- */
|
/* -------------------------------------------------------------------------- */
|
/*!Structure describing the Ethernet device */
|
/*!Structure describing the Ethernet device */
|
/* -------------------------------------------------------------------------- */
|
/* -------------------------------------------------------------------------- */
|
struct eth_device
|
struct eth_device
|
{
|
{
|
/* Basic stuff about the device */
|
/* Basic stuff about the device */
|
int enabled; /* Is peripheral enabled */
|
int enabled; /* Is peripheral enabled */
|
oraddr_t baseaddr; /* Base address in memory */
|
oraddr_t baseaddr; /* Base address in memory */
|
unsigned long int base_vapi_id; /* Start of VAPI ID block */
|
unsigned long int base_vapi_id; /* Start of VAPI ID block */
|
|
|
/* DMA controller this MAC is connected to, and associated channels */
|
/* DMA controller this MAC is connected to, and associated channels */
|
unsigned dma;
|
unsigned dma;
|
unsigned tx_channel;
|
unsigned tx_channel;
|
unsigned rx_channel;
|
unsigned rx_channel;
|
|
|
/* Details of the hardware */
|
/* Details of the hardware */
|
unsigned char mac_address[ETHER_ADDR_LEN]; /* Ext HW address */
|
unsigned char mac_address[ETHER_ADDR_LEN]; /* Ext HW address */
|
unsigned long int phy_addr; /* Int HW address */
|
unsigned long int phy_addr; /* Int HW address */
|
unsigned long int mac_int; /* interrupt line number */
|
unsigned long int mac_int; /* interrupt line number */
|
int int_line_stat; /* interrupt line status */
|
int int_line_stat; /* interrupt line status */
|
|
|
/* External interface deatils */
|
/* External interface deatils */
|
int rtx_type; /* Type of external i/f: FILE or TAP */
|
int rtx_type; /* Type of external i/f: FILE or TAP */
|
|
|
/* RX and TX file names and handles for FILE type connection. */
|
/* RX and TX file names and handles for FILE type connection. */
|
char *rxfile; /* Rx filename */
|
char *rxfile; /* Rx filename */
|
char *txfile; /* Tx filename */
|
char *txfile; /* Tx filename */
|
int txfd; /* Rx file handle */
|
int txfd; /* Rx file handle */
|
int rxfd; /* Tx file handle */
|
int rxfd; /* Tx file handle */
|
off_t loopback_offset; /* Circular buffer offset */
|
|
|
|
/* Info for TAP type connections */
|
/* Info for TAP type connections */
|
char *tap_dev; /* The TAP device */
|
char *tap_dev; /* The TAP device */
|
int rtx_fd; /* TAP device handle */
|
int rtx_fd; /* TAP device handle */
|
|
|
/* Current TX state */
|
/* Indices into the buffer descriptors. */
|
struct
|
unsigned long int tx_bd_index;
|
{
|
unsigned long int rx_bd_index;
|
unsigned long int bd_index;
|
|
} tx;
|
|
|
|
/* Current RX state */
|
|
struct
|
|
{
|
|
enum {
|
|
ETH_RXSTATE_IDLE, /* Was set to 0 */
|
|
ETH_RXSTATE_WAIT4BD, /* Was set to 10 */
|
|
ETH_RXSTATE_RECV, /* Was set to 20 */
|
|
ETH_RXSTATE_WRITEFIFO, /* Was set to 30 */
|
|
} state;
|
|
unsigned long int bd_index;
|
|
unsigned long int bd;
|
|
unsigned long int bd_addr;
|
|
int fd;
|
|
off_t *offset;
|
|
unsigned int working;
|
|
unsigned int waiting_for_dma;
|
|
unsigned int error;
|
|
long int packet_length;
|
|
long int bytes_read;
|
|
long int bytes_left;
|
|
} rx;
|
|
|
|
/* Visible registers */
|
/* Visible registers */
|
struct
|
struct
|
{
|
{
|
unsigned long int moder;
|
unsigned long int moder;
|
unsigned long int int_source;
|
unsigned long int int_source;
|
unsigned long int int_mask;
|
unsigned long int int_mask;
|
unsigned long int ipgt;
|
unsigned long int ipgt;
|
unsigned long int ipgr1;
|
unsigned long int ipgr1;
|
unsigned long int ipgr2;
|
unsigned long int ipgr2;
|
unsigned long int packetlen;
|
unsigned long int packetlen;
|
unsigned long int collconf;
|
unsigned long int collconf;
|
unsigned long int tx_bd_num;
|
unsigned long int tx_bd_num;
|
unsigned long int controlmoder;
|
unsigned long int controlmoder;
|
unsigned long int miimoder;
|
unsigned long int miimoder;
|
unsigned long int miicommand;
|
unsigned long int miicommand;
|
unsigned long int miiaddress;
|
unsigned long int miiaddress;
|
unsigned long int miitx_data;
|
unsigned long int miitx_data;
|
unsigned long int miirx_data;
|
unsigned long int miirx_data;
|
unsigned long int miistatus;
|
unsigned long int miistatus;
|
unsigned long int hash0;
|
unsigned long int hash0;
|
unsigned long int hash1;
|
unsigned long int hash1;
|
|
|
/* Buffer descriptors */
|
/* Buffer descriptors */
|
unsigned long int bd_ram[ETH_BD_SPACE / 4];
|
unsigned long int bd_ram[ETH_BD_SPACE / 4];
|
} regs;
|
} regs;
|
|
|
unsigned char rx_buff[ETH_MAXPL];
|
|
unsigned char tx_buff[ETH_MAXPL];
|
|
unsigned char lo_buff[ETH_MAXPL];
|
|
};
|
};
|
|
|
|
|
|
|
/* -------------------------------------------------------------------------- */
|
/* -------------------------------------------------------------------------- */
|
/*!Utility function to read from the ethernet RX file.
|
|
|
|
Helper function when using file I/O.
|
|
|
|
This function moves the file pointer to the current place in the packet
|
|
before reading. The Ethernet device datastructure contains the file
|
|
descriptor and offset to use.
|
|
|
|
@param[in] eth Ethernet device datastruture.
|
|
@param[out] buf Buffer for read data.
|
|
@param[in] count Number of bytes to read.
|
|
|
|
@return Number of bytes read, or zero on end-of-file or -1 on error. */
|
|
/* -------------------------------------------------------------------------- */
|
|
static ssize_t
|
|
eth_read_rx_file (struct eth_device *eth,
|
|
void *buf,
|
|
size_t count)
|
|
{
|
|
ssize_t result;
|
|
|
|
if (eth->rx.fd <= 0)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
if (eth->rx.offset)
|
|
{
|
|
if (lseek (eth->rx.fd, *(eth->rx.offset), SEEK_SET) == (off_t) - 1)
|
|
{
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
result = read (eth->rx.fd, buf, count);
|
|
|
|
if (eth->rx.offset && result >= 0)
|
|
{
|
|
*(eth->rx.offset) += result;
|
|
}
|
|
|
|
return result;
|
|
|
|
} /* eth_read_rx_file () */
|
|
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
/*!Skip bytes in the RX file.
|
|
|
|
Helper function when using file I/O.
|
|
|
|
This just updates the offset pointer in the ethernet device datastructure.
|
|
|
|
@param[in] eth Ethernet device datastruture.
|
|
@param[in] count Number of bytes to skip. */
|
|
/* -------------------------------------------------------------------------- */
|
|
static void
|
|
eth_skip_rx_file (struct eth_device *eth,
|
|
off_t count)
|
|
{
|
|
eth->rx.offset += count;
|
|
|
|
} /* eth_skip_rx_file () */
|
|
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
/* Move to next buffer descriptor in RX file.
|
|
|
|
Helper function when using file I/O.
|
|
|
|
Skip any remaining bytes in the Rx file for this transaction.
|
|
|
|
@param[in] eth Ethernet device datastruture. */
|
|
/* -------------------------------------------------------------------------- */
|
|
static void
|
|
eth_rx_next_packet (struct eth_device *eth)
|
|
{
|
|
/* Skip any possible leftovers */
|
|
if (eth->rx.bytes_left)
|
|
{
|
|
eth_skip_rx_file (eth, eth->rx.bytes_left);
|
|
}
|
|
} /* eth_rx_next_packet () */
|
|
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
/*!Emulate MIIM transaction to ethernet PHY
|
/*!Emulate MIIM transaction to ethernet PHY
|
|
|
@param[in] eth Ethernet device datastruture. */
|
@param[in] eth Ethernet device datastruture. */
|
/* -------------------------------------------------------------------------- */
|
/* -------------------------------------------------------------------------- */
|
static void
|
static void
|
eth_miim_trans (struct eth_device *eth)
|
eth_miim_trans (struct eth_device *eth)
|
{
|
{
|
switch (eth->regs.miicommand)
|
switch (eth->regs.miicommand)
|
{
|
{
|
case ((1 << ETH_MIICOMM_WCDATA_OFFSET)):
|
case ((1 << ETH_MIICOMM_WCDATA_OFFSET)):
|
/* Perhaps something to emulate here later, but for now do nothing */
|
/* Perhaps something to emulate here later, but for now do nothing */
|
break;
|
break;
|
|
|
case ((1 << ETH_MIICOMM_RSTAT_OFFSET)):
|
case ((1 << ETH_MIICOMM_RSTAT_OFFSET)):
|
/*
|
/*
|
printf("or1ksim: eth_miim_trans: phy %d\n",(int)
|
printf("or1ksim: eth_miim_trans: phy %d\n",(int)
|
((eth->regs.miiaddress >> ETH_MIIADDR_FIAD_OFFSET)&
|
((eth->regs.miiaddress >> ETH_MIIADDR_FIAD_OFFSET)&
|
ETH_MIIADDR_FIAD_MASK));
|
ETH_MIIADDR_FIAD_MASK));
|
printf("or1ksim: eth_miim_trans: reg %d\n",(int)
|
printf("or1ksim: eth_miim_trans: reg %d\n",(int)
|
((eth->regs.miiaddress >> ETH_MIIADDR_RGAD_OFFSET)&
|
((eth->regs.miiaddress >> ETH_MIIADDR_RGAD_OFFSET)&
|
ETH_MIIADDR_RGAD_MASK));
|
ETH_MIIADDR_RGAD_MASK));
|
*/
|
*/
|
/*First check if it's the correct PHY to address */
|
/*First check if it's the correct PHY to address */
|
if (((eth->regs.miiaddress >> ETH_MIIADDR_FIAD_OFFSET)&
|
if (((eth->regs.miiaddress >> ETH_MIIADDR_FIAD_OFFSET)&
|
ETH_MIIADDR_FIAD_MASK) == eth->phy_addr)
|
ETH_MIIADDR_FIAD_MASK) == eth->phy_addr)
|
{
|
{
|
/* Correct PHY - now switch based on the register address in the PHY*/
|
/* Correct PHY - now switch based on the register address in the PHY*/
|
switch ((eth->regs.miiaddress >> ETH_MIIADDR_RGAD_OFFSET)&
|
switch ((eth->regs.miiaddress >> ETH_MIIADDR_RGAD_OFFSET)&
|
ETH_MIIADDR_RGAD_MASK)
|
ETH_MIIADDR_RGAD_MASK)
|
{
|
{
|
case MII_BMCR:
|
case MII_BMCR:
|
eth->regs.miirx_data = BMCR_FULLDPLX;
|
eth->regs.miirx_data = BMCR_FULLDPLX;
|
break;
|
break;
|
case MII_BMSR:
|
case MII_BMSR:
|
eth->regs.miirx_data = BMSR_LSTATUS | BMSR_ANEGCOMPLETE |
|
eth->regs.miirx_data = BMSR_LSTATUS | BMSR_ANEGCOMPLETE |
|
BMSR_10HALF | BMSR_10FULL | BMSR_100HALF | BMSR_100FULL;
|
BMSR_10HALF | BMSR_10FULL | BMSR_100HALF | BMSR_100FULL;
|
break;
|
break;
|
case MII_PHYSID1:
|
case MII_PHYSID1:
|
eth->regs.miirx_data = 0x22; /* Micrel PHYID */
|
eth->regs.miirx_data = 0x22; /* Micrel PHYID */
|
break;
|
break;
|
case MII_PHYSID2:
|
case MII_PHYSID2:
|
eth->regs.miirx_data = 0x1613; /* Micrel PHYID */
|
eth->regs.miirx_data = 0x1613; /* Micrel PHYID */
|
break;
|
break;
|
case MII_ADVERTISE:
|
case MII_ADVERTISE:
|
eth->regs.miirx_data = ADVERTISE_FULL;
|
eth->regs.miirx_data = ADVERTISE_FULL;
|
break;
|
break;
|
case MII_LPA:
|
case MII_LPA:
|
eth->regs.miirx_data = LPA_DUPLEX | LPA_100;
|
eth->regs.miirx_data = LPA_DUPLEX | LPA_100;
|
break;
|
break;
|
case MII_EXPANSION:
|
case MII_EXPANSION:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
case MII_CTRL1000:
|
case MII_CTRL1000:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
case MII_STAT1000:
|
case MII_STAT1000:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
case MII_ESTATUS:
|
case MII_ESTATUS:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
case MII_DCOUNTER:
|
case MII_DCOUNTER:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
case MII_FCSCOUNTER:
|
case MII_FCSCOUNTER:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
case MII_NWAYTEST:
|
case MII_NWAYTEST:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
case MII_RERRCOUNTER:
|
case MII_RERRCOUNTER:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
case MII_SREVISION:
|
case MII_SREVISION:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
case MII_RESV1:
|
case MII_RESV1:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
case MII_LBRERROR:
|
case MII_LBRERROR:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
case MII_PHYADDR:
|
case MII_PHYADDR:
|
eth->regs.miirx_data = eth->phy_addr;
|
eth->regs.miirx_data = eth->phy_addr;
|
break;
|
break;
|
case MII_RESV2:
|
case MII_RESV2:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
case MII_TPISTATUS:
|
case MII_TPISTATUS:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
case MII_NCONFIG:
|
case MII_NCONFIG:
|
eth->regs.miirx_data = 0;
|
eth->regs.miirx_data = 0;
|
break;
|
break;
|
default:
|
default:
|
eth->regs.miirx_data = 0xffff;
|
eth->regs.miirx_data = 0xffff;
|
break;
|
break;
|
}
|
}
|
}
|
}
|
else
|
else
|
{
|
{
|
eth->regs.miirx_data = 0xffff; /* PHY doesn't exist, read all 1's */
|
eth->regs.miirx_data = 0xffff; /* PHY doesn't exist, read all 1's */
|
}
|
}
|
|
|
break;
|
break;
|
|
|
case ((1 << ETH_MIICOMM_SCANS_OFFSET)):
|
case ((1 << ETH_MIICOMM_SCANS_OFFSET)):
|
/* From MAC's datasheet:
|
/* From MAC's datasheet:
|
A host initiates the Scan Status Operation by asserting the SCANSTAT
|
A host initiates the Scan Status Operation by asserting the SCANSTAT
|
signal. The MIIM performs a continuous read operation of the PHY
|
signal. The MIIM performs a continuous read operation of the PHY
|
Status register. The PHY is selected by the FIAD[4:0] signals. The
|
Status register. The PHY is selected by the FIAD[4:0] signals. The
|
link status LinkFail signal is asserted/deasserted by the MIIM module
|
link status LinkFail signal is asserted/deasserted by the MIIM module
|
and reflects the link status bit of the PHY Status register. The
|
and reflects the link status bit of the PHY Status register. The
|
signal NVALID is used for qualifying the validity of the LinkFail
|
signal NVALID is used for qualifying the validity of the LinkFail
|
signals and the status data PRSD[15:0]. These signals are invalid
|
signals and the status data PRSD[15:0]. These signals are invalid
|
until the first scan status operation ends. During the scan status
|
until the first scan status operation ends. During the scan status
|
operation, the BUSY signal is asserted until the last read is
|
operation, the BUSY signal is asserted until the last read is
|
performed (the scan status operation is stopped).
|
performed (the scan status operation is stopped).
|
|
|
So for now - do nothing, leave link status indicator as permanently
|
So for now - do nothing, leave link status indicator as permanently
|
with link.
|
with link.
|
*/
|
*/
|
|
|
break;
|
break;
|
|
|
default:
|
default:
|
break;
|
break;
|
}
|
}
|
} /* eth_miim_trans () */
|
} /* eth_miim_trans () */
|
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
/*!Tx clock function.
|
|
|
|
The original version had 4 states, which allowed modeling the transfer of
|
|
data one byte per cycle.
|
|
|
|
For now we use only the one state for efficiency. When we find something in
|
|
a buffer descriptor, we transmit it. We should wake up for this every 10
|
|
cycles.
|
|
|
|
We also remove numerous calculations that are not needed here.
|
/* -------------------------------------------------------------------------- */
|
|
/*!Write an Ethernet packet to a FILE interface.
|
|
|
@todo We should eventually reinstate the one byte per cycle transfer.
|
This writes a single Ethernet packet to a FILE interface. The format is to
|
|
write the length, then the data.
|
|
|
Responsible for starting and completing any TX actions.
|
@param[in] eth Pointer to the relevant Ethernet data structure.
|
|
@param[in] buf Where to get the data.
|
|
@param[in] length Length of data to write.
|
|
|
@param[in] dat The Ethernet data structure, passed as a void pointer. */
|
@return The length if successful, a negative value otherwise. */
|
/* -------------------------------------------------------------------------- */
|
/* -------------------------------------------------------------------------- */
|
static void
|
static ssize_t
|
eth_controller_tx_clock (void *dat)
|
eth_write_file_packet (struct eth_device *eth,
|
|
unsigned char *buf,
|
|
unsigned long int length)
|
{
|
{
|
struct eth_device *eth = dat;
|
ssize_t nwritten;
|
|
|
/* First word of BD is flags and length, second is pointer to buffer */
|
/* Write length to file. */
|
unsigned long int bd_info = eth->regs.bd_ram[eth->tx.bd_index];
|
nwritten = write (eth->txfd, &(length), sizeof (length));
|
unsigned long int bd_addr = eth->regs.bd_ram[eth->tx.bd_index + 1];
|
if (nwritten != sizeof (length))
|
|
{
|
|
fprintf (stderr, "ERROR: Failed to write Ethernet packet length: %s.\n",
|
|
strerror (errno));
|
|
return -1;
|
|
}
|
|
|
/* If we have a buffer ready, get it and transmit it. */
|
/* write data to file */
|
if (TEST_FLAG (bd_info, ETH_TX_BD, READY))
|
nwritten = write (eth->txfd, buf, length);
|
|
if (nwritten != length)
|
{
|
{
|
long int packet_length;
|
fprintf (stderr, "ERROR: Failed to write Ethernet packet data: %s.\n",
|
long int bytes_sent;
|
strerror (errno));
|
long int nwritten = 0;
|
return -1;
|
|
}
|
|
|
/* Get the packet length */
|
return nwritten;
|
packet_length = GET_FIELD (bd_info, ETH_TX_BD, LENGTH);
|
|
|
|
/* Clear error status bits and retry count. */
|
} /* eth_write_file_packet () */
|
CLEAR_FLAG (bd_info, ETH_TX_BD, DEFER);
|
|
CLEAR_FLAG (bd_info, ETH_TX_BD, COLLISION);
|
|
CLEAR_FLAG (bd_info, ETH_TX_BD, RETRANSMIT);
|
|
CLEAR_FLAG (bd_info, ETH_TX_BD, UNDERRUN);
|
|
CLEAR_FLAG (bd_info, ETH_TX_BD, NO_CARRIER);
|
|
|
|
SET_FIELD (bd_info, ETH_TX_BD, RETRY, 0);
|
|
|
|
/* Copy data from buffer descriptor address into our local tx_buff. */
|
/* -------------------------------------------------------------------------- */
|
for (bytes_sent = 0; bytes_sent < packet_length; bytes_sent +=4)
|
/*!Write an Ethernet packet to a TAP interface.
|
{
|
|
unsigned long int read_word =
|
|
eval_direct32 (bytes_sent + bd_addr, 0, 0);
|
|
|
|
eth->tx_buff[bytes_sent] = (unsigned char) (read_word >> 24);
|
This writes a single Ethernet packet to a TAP interface.
|
eth->tx_buff[bytes_sent + 1] = (unsigned char) (read_word >> 16);
|
|
eth->tx_buff[bytes_sent + 2] = (unsigned char) (read_word >> 8);
|
|
eth->tx_buff[bytes_sent + 3] = (unsigned char) (read_word);
|
|
}
|
|
|
|
/* Send packet according to interface type. */
|
@param[in] eth Pointer to the relevant Ethernet data structure.
|
switch (eth->rtx_type)
|
@param[in] buf Where to get the data.
|
|
@param[in] length Length of data to write.
|
|
|
|
@return The length if successful, a negative value otherwise. */
|
|
/* -------------------------------------------------------------------------- */
|
|
static ssize_t
|
|
eth_write_tap_packet (struct eth_device *eth,
|
|
unsigned char *buf,
|
|
unsigned long int length)
|
{
|
{
|
case ETH_RTX_FILE:
|
ssize_t nwritten;
|
/* write packet length to file */
|
|
nwritten =
|
|
write (eth->txfd, &(packet_length),
|
|
sizeof (packet_length));
|
|
/* write data to file */
|
|
nwritten = write (eth->txfd, eth->tx_buff, packet_length);
|
|
break;
|
|
|
|
case ETH_RTX_TAP:
|
|
#if ETH_DEBUG
|
#if ETH_DEBUG
|
{
|
|
int j;
|
int j;
|
|
|
printf ("Writing TAP\n");
|
printf ("Writing TAP\n");
|
printf (" packet %d bytes:", (int) packet_length);
|
printf (" packet %d bytes:", (int) length);
|
|
|
for (j = 0; j < packet_length; j++)
|
for (j = 0; j < length; j++)
|
{
|
{
|
if (0 == (j % 16))
|
if (0 == (j % 16))
|
{
|
{
|
printf ("\n");
|
printf ("\n");
|
}
|
}
|
else if (0 == (j % 8))
|
else if (0 == (j % 8))
|
{
|
{
|
printf (" ");
|
printf (" ");
|
}
|
}
|
|
|
printf ("%.2x ", eth->tx_buff[j]);
|
printf ("%.2x ", buf[j]);
|
}
|
}
|
|
|
printf("\nend packet:\n");
|
printf("\nend packet:\n");
|
}
|
|
#endif
|
#endif
|
nwritten = write (eth->rtx_fd, eth->tx_buff, packet_length);
|
|
break;
|
/* Write the data to the TAP */
|
|
nwritten = write (eth->rtx_fd, buf, length);
|
|
if (nwritten != length)
|
|
{
|
|
fprintf (stderr, "ERROR: Failed to write Ethernet packet data: %s.\n",
|
|
strerror (errno));
|
|
return -1;
|
|
}
|
|
|
|
return nwritten;
|
|
|
|
} /* eth_write_tap_packet () */
|
|
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
/*!Write an Ethernet packet.
|
|
|
|
This writes a single Ethernet packet to the outside world from the supplied
|
|
buffer. It deals with the different types of external interface.
|
|
|
|
@param[in] eth Pointer to the relevant Ethernet data structure.
|
|
@param[in] buf Where to get the data.
|
|
@param[in] length Length of data to write.
|
|
|
|
@return The length if successful, zero if no packet was available,
|
|
a negative value otherwise. */
|
|
/* -------------------------------------------------------------------------- */
|
|
static ssize_t
|
|
eth_write_packet (struct eth_device *eth,
|
|
unsigned char *buf,
|
|
ssize_t length)
|
|
{
|
|
/* Send packet according to interface type. */
|
|
switch (eth->rtx_type)
|
|
{
|
|
case ETH_RTX_FILE: return eth_write_file_packet (eth, buf, length);
|
|
case ETH_RTX_TAP: return eth_write_tap_packet (eth, buf, length);
|
|
|
|
default:
|
|
fprintf (stderr, "Unknown Ethernet write interface: ignored.\n");
|
|
return (ssize_t) -1;
|
|
}
|
|
} /* eth_write_packet () */
|
|
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
/*!Flush a Tx buffer descriptor to the outside world.
|
|
|
|
We know the buffer descriptor is full, so write it to the appropriate
|
|
outside interface.
|
|
|
|
@param[in] eth The Ethernet data structure. */
|
|
/* -------------------------------------------------------------------------- */
|
|
static void
|
|
eth_flush_bd (struct eth_device *eth)
|
|
{
|
|
/* First word of BD is flags and length, second is pointer to buffer */
|
|
unsigned long int bd_info = eth->regs.bd_ram[eth->tx_bd_index];
|
|
unsigned long int bd_addr = eth->regs.bd_ram[eth->tx_bd_index + 1];
|
|
unsigned char buf[ETH_MAXPL];
|
|
long int packet_length;
|
|
long int bytes_sent;
|
|
|
|
/* Get the packet length */
|
|
packet_length = GET_FIELD (bd_info, ETH_TX_BD, LENGTH);
|
|
|
|
/* Clear error status bits and retry count. */
|
|
CLEAR_FLAG (bd_info, ETH_TX_BD, DEFER);
|
|
CLEAR_FLAG (bd_info, ETH_TX_BD, COLLISION);
|
|
CLEAR_FLAG (bd_info, ETH_TX_BD, RETRANSMIT);
|
|
CLEAR_FLAG (bd_info, ETH_TX_BD, UNDERRUN);
|
|
CLEAR_FLAG (bd_info, ETH_TX_BD, NO_CARRIER);
|
|
|
|
SET_FIELD (bd_info, ETH_TX_BD, RETRY, 0);
|
|
|
|
/* Copy data from buffer descriptor address into our local buf. */
|
|
for (bytes_sent = 0; bytes_sent < packet_length; bytes_sent +=4)
|
|
{
|
|
unsigned long int read_word =
|
|
eval_direct32 (bytes_sent + bd_addr, 0, 0);
|
|
|
|
buf[bytes_sent] = (unsigned char) (read_word >> 24);
|
|
buf[bytes_sent + 1] = (unsigned char) (read_word >> 16);
|
|
buf[bytes_sent + 2] = (unsigned char) (read_word >> 8);
|
|
buf[bytes_sent + 3] = (unsigned char) (read_word);
|
}
|
}
|
|
|
/* Set BD status. If we didn't write the whole packet, then we retry. */
|
/* Send packet according to interface type and set BD status. If we didn't
|
if (nwritten == packet_length)
|
write the whole packet, then we retry. */
|
|
if (eth_write_packet (eth, buf, packet_length) == packet_length)
|
{
|
{
|
CLEAR_FLAG (bd_info, ETH_TX_BD, READY);
|
CLEAR_FLAG (bd_info, ETH_TX_BD, READY);
|
SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, TXB);
|
SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, TXB);
|
}
|
}
|
else
|
else
|
{
|
{
|
/* Does this retry mechanism really work? */
|
/* Does this retry mechanism really work? */
|
CLEAR_FLAG (bd_info, ETH_TX_BD, READY);
|
CLEAR_FLAG (bd_info, ETH_TX_BD, READY);
|
CLEAR_FLAG (bd_info, ETH_TX_BD, COLLISION);
|
CLEAR_FLAG (bd_info, ETH_TX_BD, COLLISION);
|
SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, TXE);
|
SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, TXE);
|
#if ETH_DEBUG
|
#if ETH_DEBUG
|
printf ("Transmit retry request.\n");
|
printf ("Transmit retry request.\n");
|
#endif
|
#endif
|
}
|
}
|
|
|
/* Update the flags in the buffer descriptor */
|
/* Update the flags in the buffer descriptor */
|
eth->regs.bd_ram[eth->tx.bd_index] = bd_info;
|
eth->regs.bd_ram[eth->tx_bd_index] = bd_info;
|
|
|
/* This looks erroneous. Surely it will conflict with the retry flag */
|
|
SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, TXB);
|
|
|
|
/* Generate interrupt to indicate transfer complete, under the
|
/* Generate interrupt to indicate transfer complete, under the
|
following criteria all being met:
|
following criteria all being met:
|
- either INT_MASK flag for Tx (OK or error) is set
|
- either INT_MASK flag for Tx (OK or error) is set
|
- the bugger descriptor has its IRQ flag set
|
- the bugger descriptor has its IRQ flag set
|
- there is no interrupt in progress.
|
- there is no interrupt in progress.
|
|
|
@todo We ought to warn if we get here and fail to set an IRQ. */
|
@todo We ought to warn if we get here and fail to set an IRQ. */
|
if ((TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, TXE_M) ||
|
if ((TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, TXE_M) ||
|
TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, TXB_M)) &&
|
TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, TXB_M)) &&
|
TEST_FLAG (bd_info, ETH_TX_BD, IRQ) &&
|
TEST_FLAG (bd_info, ETH_TX_BD, IRQ))
|
!eth->int_line_stat)
|
{
|
|
if (eth->int_line_stat)
|
|
{
|
|
fprintf (stderr, "Warning: Interrupt active during Tx.\n");
|
|
}
|
|
else
|
{
|
{
|
#if ETH_DEBUG
|
#if ETH_DEBUG
|
printf ("TRANSMIT interrupt\n");
|
printf ("TRANSMIT interrupt\n");
|
#endif
|
#endif
|
report_interrupt (eth->mac_int);
|
report_interrupt (eth->mac_int);
|
eth->int_line_stat = 1;
|
eth->int_line_stat = 1;
|
}
|
}
|
else
|
|
{
|
|
#if ETH_DEBUG
|
|
printf ("Failed to send TRANSMIT interrupt\n");
|
|
#endif
|
|
}
|
}
|
|
|
/* Advance to next BD, wrapping around if appropriate. */
|
/* Advance to next BD, wrapping around if appropriate. */
|
if (TEST_FLAG (bd_info, ETH_TX_BD, WRAP) ||
|
if (TEST_FLAG (bd_info, ETH_TX_BD, WRAP) ||
|
eth->tx.bd_index >= ETH_BD_COUNT)
|
eth->tx_bd_index >= ((eth->regs.tx_bd_num - 1) * 2))
|
{
|
{
|
eth->tx.bd_index = 0;
|
eth->tx_bd_index = 0;
|
}
|
}
|
else
|
else
|
{
|
{
|
eth->tx.bd_index += 2;
|
eth->tx_bd_index += 2;
|
}
|
|
}
|
}
|
|
} /* eth_flush_bd () */
|
/* Wake up again after 1 ticks (was 10, changed by Julius). */
|
|
SCHED_ADD (eth_controller_tx_clock, dat, 1);
|
|
|
|
} /* eth_controller_tx_clock () */
|
|
|
|
|
|
/* -------------------------------------------------------------------------- */
|
/* -------------------------------------------------------------------------- */
|
/*!Rx clock function.
|
/*!Tx clock function.
|
|
|
NEEDS WRITING
|
Responsible for starting and completing any TX actions.
|
|
|
The original version had 4 states, which allowed modeling the transfer of
|
The original version had 4 states, which allowed modeling the transfer of
|
data one byte per cycle.
|
data one byte per cycle. For now we use only the one state for
|
|
efficiency. When we find something in a buffer descriptor, we transmit
|
For now we use only the one state for efficiency. When we find something in
|
it.
|
a buffer descriptor, we transmit it. We should wake up for this every 10
|
|
cycles.
|
|
|
|
We also remove numerous calculations that are not needed here.
|
We reschedule every cycle. There is no point in trying to do anything if
|
|
there is an interrupt still being processed by the core.
|
|
|
@todo We should eventually reinstate the one byte per cycle transfer.
|
@todo We should eventually reinstate the one byte per cycle transfer.
|
|
|
Responsible for starting and completing any TX actions.
|
|
|
|
@param[in] dat The Ethernet data structure, passed as a void pointer. */
|
@param[in] dat The Ethernet data structure, passed as a void pointer. */
|
/* -------------------------------------------------------------------------- */
|
/* -------------------------------------------------------------------------- */
|
|
static void
|
|
eth_controller_tx_clock (void *dat)
|
|
{
|
|
struct eth_device *eth = dat;
|
|
|
/* ========================================================================= */
|
/* Only do anything if there is not an interrupt outstanding. */
|
|
if (!eth->int_line_stat)
|
|
{
|
|
/* First word of BD is flags. If we have a buffer ready, get it and
|
|
transmit it. */
|
|
if (TEST_FLAG (eth->regs.bd_ram[eth->tx_bd_index], ETH_TX_BD, READY))
|
|
{
|
|
eth_flush_bd (eth);
|
|
}
|
|
}
|
|
|
|
/* Wake up again after 1 ticks (was 10, changed by Julius). */
|
|
SCHED_ADD (eth_controller_tx_clock, dat, 1);
|
|
|
/* ========================================================================= */
|
} /* eth_controller_tx_clock () */
|
/* RX LOGIC */
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* RX clock
|
|
* Responsible for starting and finishing RX
|
|
*/
|
|
static void
|
|
eth_controller_rx_clock (void *dat)
|
|
{
|
|
struct eth_device *eth = dat;
|
|
long nread = 0;
|
|
unsigned long send_word;
|
|
struct pollfd fds[1];
|
|
int n;
|
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
/*!Read an Ethernet packet from a FILE interface.
|
|
|
switch (eth->rx.state)
|
This reads a single Ethernet packet from the outside world via a FILE
|
{
|
interface.
|
case ETH_RXSTATE_IDLE:
|
|
eth->rx.state = ETH_RXSTATE_WAIT4BD;
|
|
break;
|
|
|
|
case ETH_RXSTATE_WAIT4BD:
|
The format is 4 bytes of packet length, followed by the packet data.
|
|
|
eth->rx.bd = eth->regs.bd_ram[eth->rx.bd_index];
|
@param[in] eth Pointer to the relevant Ethernet data structure
|
eth->rx.bd_addr = eth->regs.bd_ram[eth->rx.bd_index + 1];
|
@param[out] buf Where to put the data
|
|
|
if (TEST_FLAG (eth->rx.bd, ETH_RX_BD, READY))
|
@return The length if successful, zero if no packet was available
|
|
(i.e. EOF), a negative value otherwise. */
|
|
/* -------------------------------------------------------------------------- */
|
|
static ssize_t
|
|
eth_read_file_packet (struct eth_device *eth,
|
|
unsigned char *buf)
|
{
|
{
|
/*****************/
|
ssize_t packet_length;
|
/* Initialize RX */
|
ssize_t nread;
|
CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, MISS);
|
|
CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, INVALID);
|
|
CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, DRIBBLE);
|
|
CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, UVERRUN);
|
|
CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, COLLISION);
|
|
CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, TOOBIG);
|
|
CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, TOOSHORT);
|
|
|
|
/* Setup file to read from */
|
/* Read packet length. We may be at EOF. */
|
if (TEST_FLAG (eth->regs.moder, ETH_MODER, LOOPBCK))
|
nread = read (eth->rxfd, &(packet_length), sizeof (packet_length));
|
|
|
|
if (0 == nread)
|
{
|
{
|
eth->rx.fd = eth->txfd;
|
return 0; /* No more packets */
|
eth->rx.offset = &(eth->loopback_offset);
|
|
}
|
}
|
else
|
else if (nread < sizeof (packet_length))
|
{
|
{
|
eth->rx.fd = eth->rxfd;
|
fprintf (stderr, "ERROR: Failed to read length from file.\n");
|
eth->rx.offset = 0;
|
return -1;
|
}
|
}
|
eth->rx.state = ETH_RXSTATE_RECV;
|
|
|
|
|
/* Packet must be big enough to hold a header */
|
|
if (packet_length < ETHER_HDR_LEN)
|
|
{
|
|
fprintf (stderr, "Warning: Ethernet packet length %zd too small.\n",
|
|
packet_length);
|
|
return -1;
|
}
|
}
|
else if (!TEST_FLAG (eth->regs.moder, ETH_MODER, RXEN))
|
|
|
/* Read the packet proper. */
|
|
nread = read (eth->rxfd, buf, packet_length);
|
|
|
|
if (nread != packet_length)
|
{
|
{
|
eth->rx.state = ETH_RXSTATE_IDLE;
|
fprintf (stderr, "ERROR: Failed to read packet from file.\n");
|
|
return -1;
|
}
|
}
|
else
|
|
|
return packet_length;
|
|
|
|
} /* eth_read_file_packet () */
|
|
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
/*!Read an Ethernet packet from a FILE interface.
|
|
|
|
This reads a single Ethernet packet from the outside world via a TAP
|
|
interface.
|
|
|
|
A complete packet is always read, so its length (minus CRC) is the amount
|
|
read.
|
|
|
|
@param[in] eth Pointer to the relevant Ethernet data structure
|
|
@param[out] buf Where to put the data
|
|
|
|
@return The length if successful, zero if no packet was available,
|
|
a negative value otherwise. */
|
|
/* -------------------------------------------------------------------------- */
|
|
static ssize_t
|
|
eth_read_tap_packet (struct eth_device *eth,
|
|
unsigned char *buf)
|
{
|
{
|
/* Poll to see if there is data to read */
|
|
struct pollfd fds[1];
|
struct pollfd fds[1];
|
int n;
|
int n;
|
|
ssize_t packet_length;
|
|
|
|
/* Poll to see if there is data to read */
|
fds[0].fd = eth->rtx_fd;
|
fds[0].fd = eth->rtx_fd;
|
fds[0].events = POLLIN;
|
fds[0].events = POLLIN;
|
|
|
n = poll (fds, 1, 0);
|
n = poll (fds, 1, 0);
|
if (n < 0)
|
if (n < 0)
|
{
|
{
|
fprintf (stderr, "Warning: Poll of WAIT4BD failed %s: ignored.\n",
|
fprintf (stderr, "Warning: Poll for TAP receive failed %s: ignored.\n",
|
strerror (errno));
|
strerror (errno));
|
|
return -1;
|
}
|
}
|
else if ((n > 0) && ((fds[0].revents & POLLIN) == POLLIN))
|
else if ((n > 0) && ((fds[0].revents & POLLIN) == POLLIN))
|
{
|
{
|
printf ("Reading TAP and all BDs full = BUSY\n");
|
/* Data to be read from TAP */
|
nread = read (eth->rtx_fd, eth->rx_buff, ETH_MAXPL);
|
packet_length = read (eth->rtx_fd, buf, ETH_MAXPL);
|
|
#if ETH_DEBUG
|
if (nread < 0)
|
printf ("%d bytes read from TAP.\n", (int) packet_length);
|
|
#endif
|
|
if (packet_length < 0)
|
{
|
{
|
fprintf (stderr,
|
fprintf (stderr, "Warning: Read of RXTATE_RECV failed: %s.\n",
|
"Warning: Read of WAIT4BD failed %s: ignored\n",
|
|
strerror (errno));
|
strerror (errno));
|
}
|
SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, RXE);
|
else if (nread > 0)
|
|
{
|
|
SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, BUSY);
|
|
|
|
if (TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, BUSY_M) &&
|
/* Signal interrupt if enabled, and no interrupt currently in
|
|
progress. */
|
|
if (TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, RXE_M) &&
|
!eth->int_line_stat)
|
!eth->int_line_stat)
|
{
|
{
|
printf ("ETH_RXSTATE_WAIT4BD BUSY interrupt\n");
|
#if ETH_DEBUG
|
|
printf ("Ethernet failed receive interrupt\n");
|
|
#endif
|
report_interrupt (eth->mac_int);
|
report_interrupt (eth->mac_int);
|
eth->int_line_stat = 1;
|
eth->int_line_stat = 1;
|
}
|
}
|
}
|
}
|
|
|
|
return packet_length;
|
}
|
}
|
|
else
|
|
{
|
|
return 0; /* No packet */
|
}
|
}
|
|
} /* eth_read_tap_packet () */
|
|
|
break;
|
|
|
|
case ETH_RXSTATE_RECV:
|
/* -------------------------------------------------------------------------- */
|
|
/*!Read an Ethernet packet.
|
|
|
|
This reads a single Ethernet packet from the outside world into the
|
|
supplied buffer. It deals with the different types of external interface.
|
|
|
|
@param[in] eth Pointer to the relevant Ethernet data structure
|
|
@param[out] buf Where to put the data
|
|
|
|
@return The length if successful, zero if no packet was available,
|
|
a negative value otherwise. */
|
|
/* -------------------------------------------------------------------------- */
|
|
static ssize_t
|
|
eth_read_packet (struct eth_device *eth,
|
|
unsigned char *buf)
|
|
{
|
switch (eth->rtx_type)
|
switch (eth->rtx_type)
|
{
|
{
|
case ETH_RTX_FILE:
|
case ETH_RTX_FILE: return eth_read_file_packet (eth, buf);
|
/* Read packet length */
|
case ETH_RTX_TAP: return eth_read_tap_packet (eth, buf);
|
if (eth_read_rx_file
|
|
(eth, &(eth->rx.packet_length),
|
default:
|
sizeof (eth->rx.packet_length)) <
|
fprintf (stderr, "Unknown Ethernet read interface: ignored.\n");
|
sizeof (eth->rx.packet_length))
|
return (ssize_t) -1;
|
{
|
|
/* TODO: just do what real ethernet would do (some kind of error
|
|
state) */
|
|
sim_done ();
|
|
break;
|
|
}
|
}
|
|
} /* eth_read_packet () */
|
|
|
/* Packet must be big enough to hold a header */
|
|
if (eth->rx.packet_length < ETHER_HDR_LEN)
|
|
{
|
|
eth_rx_next_packet (eth);
|
|
|
|
eth->rx.state = ETH_RXSTATE_WAIT4BD;
|
/* -------------------------------------------------------------------------- */
|
break;
|
/*!Fill a buffer descriptor
|
}
|
|
|
|
eth->rx.bytes_read = 0;
|
A buffer descriptor is empty. Attempt to fill it from the outside world.
|
eth->rx.bytes_left = eth->rx.packet_length;
|
|
|
|
/* for now Read entire packet into memory */
|
@param[in] eth The Ethernet data structure, passed as a void pointer. */
|
nread = eth_read_rx_file (eth, eth->rx_buff, eth->rx.bytes_left);
|
/* -------------------------------------------------------------------------- */
|
if (nread < eth->rx.bytes_left)
|
static void
|
|
eth_fill_bd (struct eth_device *eth)
|
{
|
{
|
eth->rx.error = 1;
|
|
break;
|
|
}
|
|
|
|
eth->rx.packet_length = nread;
|
/* First word of BD is flags and length, second is pointer to buffer */
|
eth->rx.bytes_left = nread;
|
unsigned long int bd_info = eth->regs.bd_ram[eth->rx_bd_index];
|
eth->rx.bytes_read = 0;
|
unsigned long int bd_addr = eth->regs.bd_ram[eth->rx_bd_index + 1];
|
|
|
eth->rx.state = ETH_RXSTATE_WRITEFIFO;
|
long int packet_length;
|
|
long int bytes_read;
|
|
unsigned char buf[ETH_MAXPL];
|
|
|
break;
|
/* Clear various status bits */
|
|
CLEAR_FLAG (bd_info, ETH_RX_BD, MISS);
|
|
CLEAR_FLAG (bd_info, ETH_RX_BD, INVALID);
|
|
CLEAR_FLAG (bd_info, ETH_RX_BD, DRIBBLE);
|
|
CLEAR_FLAG (bd_info, ETH_RX_BD, UVERRUN);
|
|
CLEAR_FLAG (bd_info, ETH_RX_BD, COLLISION);
|
|
CLEAR_FLAG (bd_info, ETH_RX_BD, TOOBIG);
|
|
CLEAR_FLAG (bd_info, ETH_RX_BD, TOOSHORT);
|
|
|
case ETH_RTX_TAP:
|
/* Loopback is permitted. We believe that Linux never uses it, so we'll
|
/* Poll to see if there is data to read */
|
note the attempt and ignore.
|
fds[0].fd = eth->rtx_fd;
|
|
fds[0].events = POLLIN;
|
|
|
|
n = poll (fds, 1, 0);
|
@todo We should support this. */
|
if (n < 0)
|
if (TEST_FLAG (eth->regs.moder, ETH_MODER, LOOPBCK))
|
{
|
{
|
fprintf (stderr,
|
PRINTF ("Ethernet loopback requested.\n");
|
"Warning: Poll of RXTATE_RECV failed %s: ignored.\n",
|
fprintf (stderr, "ERROR: Loopback not supported. Ignored.\n");
|
strerror (errno));
|
|
}
|
}
|
else if ((n > 0) && ((fds[0].revents & POLLIN) == POLLIN))
|
|
{
|
|
#if ETH_DEBUG
|
|
printf ("Reading TAP. ");
|
|
#endif
|
|
nread = read (eth->rtx_fd, eth->rx_buff, ETH_MAXPL);
|
|
#if ETH_DEBUG
|
|
printf ("%d bytes read.\n",(int) nread);
|
|
#endif
|
|
if (nread < 0)
|
|
{
|
|
fprintf (stderr,
|
|
"Warning: Read of RXTATE_RECV failed %s: ignored\n",
|
|
strerror (errno));
|
|
|
|
SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, RXE);
|
packet_length = eth_read_packet (eth, buf);
|
|
if (packet_length <= 0)
|
if (TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, RXE_M) &&
|
|
!eth->int_line_stat)
|
|
{
|
{
|
printf ("ETH_RXTATE_RECV RXE interrupt\n");
|
/* Empty packet or error. No more to do here. */
|
report_interrupt (eth->mac_int);
|
return;
|
eth->int_line_stat = 1;
|
|
}
|
|
}
|
|
|
|
}
|
}
|
|
|
/* If not promiscouos mode, check the destination address */
|
/* Got a packet successfully. If not promiscuous mode, check the destination
|
if (!TEST_FLAG (eth->regs.moder, ETH_MODER, PRO) && nread)
|
address is meant for us. */
|
|
if (!TEST_FLAG (eth->regs.moder, ETH_MODER, PRO))
|
{
|
{
|
if (TEST_FLAG (eth->regs.moder, ETH_MODER, IAM)
|
if (TEST_FLAG (eth->regs.moder, ETH_MODER, IAM))
|
&& (eth->rx_buff[0] & 1))
|
|
{
|
{
|
/* Nothing for now */
|
/* There is little documentation of how IAM is supposed to work. It
|
|
seems that some mapping function (not defined) maps the address
|
|
down to a number in the range 0-63. If that bit is set in
|
|
HASH0/HASH1 registers, the packet is accepted. */
|
|
fprintf (stderr, "Warning: Individual Address Mode ignored.\n");
|
}
|
}
|
|
|
|
/* Check for HW address match. */
|
if (((eth->mac_address[5] != eth->rx_buff[0]) &&
|
if ((0 != bcmp (eth->mac_address, buf, ETHER_ADDR_LEN)) &&
|
(eth->rx_buff[5] != 0xff) ) ||
|
(0 != bcmp (mac_broadcast, buf, ETHER_ADDR_LEN)))
|
((eth->mac_address[4] != eth->rx_buff[1]) &&
|
|
(eth->rx_buff[4] != 0xff) ) ||
|
|
((eth->mac_address[3] != eth->rx_buff[2]) &&
|
|
(eth->rx_buff[3] != 0xff) ) ||
|
|
((eth->mac_address[2] != eth->rx_buff[3]) &&
|
|
(eth->rx_buff[2] != 0xff) ) ||
|
|
((eth->mac_address[1] != eth->rx_buff[4]) &&
|
|
(eth->rx_buff[1] != 0xff) ) ||
|
|
((eth->mac_address[0] != eth->rx_buff[5]) &&
|
|
(eth->rx_buff[0] != 0xff)))
|
|
|
|
{
|
{
|
#if ETH_DEBUG
|
#if ETH_DEBUG
|
printf("ETH_RXSTATE dropping packet for %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
|
printf ("packet for %.2x:%.2x:%.2x:%.2x:%.2x:%.2x ignored.\n",
|
eth->rx_buff[0],
|
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
|
eth->rx_buff[1],
|
|
eth->rx_buff[2],
|
|
eth->rx_buff[3],
|
|
eth->rx_buff[4],
|
|
eth->rx_buff[5]);
|
|
#endif
|
#endif
|
break;
|
/* Not for us. No more to do here. */
|
|
return;
|
}
|
}
|
}
|
}
|
|
|
eth->rx.packet_length = nread;
|
/* Transfer the buffer into the BD. */
|
eth->rx.bytes_left = nread;
|
#if ETH_DEBUG
|
eth->rx.bytes_read = 0;
|
printf ("writing to Rx BD%d: %d bytes @ 0x%.8x\n",
|
|
(int) eth->rx_bd_index / 2, (int) packet_length,
|
if (nread)
|
(unsigned int)bd_addr);
|
eth->rx.state = ETH_RXSTATE_WRITEFIFO;
|
#endif
|
|
|
break;
|
for (bytes_read = 0; bytes_read < packet_length; bytes_read +=4)
|
case ETH_RTX_VAPI:
|
{
|
break;
|
unsigned long int send_word =
|
|
((unsigned long) buf[bytes_read] << 24) |
|
|
((unsigned long) buf[bytes_read + 1] << 16) |
|
|
((unsigned long) buf[bytes_read + 2] << 8) |
|
|
((unsigned long) buf[bytes_read + 3] );
|
|
set_direct32 (bd_addr + bytes_read, send_word, 0, 0);
|
}
|
}
|
break;
|
|
|
|
case ETH_RXSTATE_WRITEFIFO:
|
|
#if ETH_DEBUG
|
#if ETH_DEBUG
|
printf("ETH_RXSTATE_WRITEFIFO: writing to RXBD%d: %d bytes @ 0x%.8x\n",
|
printf("BD filled with 0x%08lx bytes.\n", bytes_read);
|
(int) eth->rx.bd_index/2, (int)eth->rx.bytes_left,
|
|
(unsigned int)eth->rx.bd_addr);
|
|
#endif
|
#endif
|
if (eth->rx.bytes_left > 0){
|
|
while((int) eth->rx.bytes_left){
|
/* Write result to BD.
|
send_word = ((unsigned long) eth->rx_buff[eth->rx.bytes_read] << 24) |
|
|
((unsigned long) eth->rx_buff[eth->rx.bytes_read + 1] << 16) |
|
@todo Why is the length 4 more than the packet length? Is that for
|
((unsigned long) eth->rx_buff[eth->rx.bytes_read + 2] << 8) |
|
the CRC? */
|
((unsigned long) eth->rx_buff[eth->rx.bytes_read + 3]);
|
SET_FIELD (bd_info, ETH_RX_BD, LENGTH, packet_length + 4);
|
set_direct32 (eth->rx.bd_addr + eth->rx.bytes_read, send_word, 0, 0);
|
CLEAR_FLAG (bd_info, ETH_RX_BD, READY);
|
/* update counters */
|
SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, RXB);
|
if (eth->rx.bytes_left >= 4)
|
|
|
eth->regs.bd_ram[eth->rx_bd_index] = bd_info;
|
|
|
|
/* Advance to next BD. The Rx BDs start after the Tx BDs. */
|
|
if (TEST_FLAG (bd_info, ETH_RX_BD, WRAP) ||
|
|
(eth->rx_bd_index >= ETH_BD_COUNT))
|
{
|
{
|
eth->rx.bytes_left -= 4;
|
eth->rx_bd_index = eth->regs.tx_bd_num * 2;
|
eth->rx.bytes_read += 4;
|
|
}
|
}
|
else
|
else
|
{
|
{
|
eth->rx.bytes_read += eth->rx.bytes_left;
|
eth->rx_bd_index += 2;
|
eth->rx.bytes_left = 0;
|
|
}
|
|
}
|
}
|
|
|
|
/* Raise an interrupt if necessary. */
|
|
if (TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, RXB_M) &&
|
|
TEST_FLAG (bd_info, ETH_RX_BD, IRQ))
|
|
{
|
|
if (eth->int_line_stat)
|
|
{
|
|
fprintf (stderr, "Warning: Interrupt active during Rx.\n");
|
}
|
}
|
|
else
|
|
{
|
#if ETH_DEBUG
|
#if ETH_DEBUG
|
printf("ETH_RXSTATE_WRITEFIFO: bytes read: 0x%.8x\n",
|
printf ("Rx successful receive interrupt\n");
|
(unsigned int)eth->rx.bytes_read);
|
|
#endif
|
#endif
|
if (eth->rx.bytes_left <= 0)
|
report_interrupt (eth->mac_int);
|
{
|
eth->int_line_stat = 1;
|
/* Write result to bd */
|
}
|
SET_FIELD (eth->rx.bd, ETH_RX_BD, LENGTH, eth->rx.packet_length + 4);
|
}
|
CLEAR_FLAG (eth->rx.bd, ETH_RX_BD, READY);
|
} /* eth_fill_bd () */
|
SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, RXB);
|
|
/*
|
|
if (eth->rx.packet_length <
|
|
(GET_FIELD (eth->regs.packetlen, ETH_PACKETLEN, MINFL) - 4))
|
|
SET_FLAG (eth->rx.bd, ETH_RX_BD, TOOSHORT);
|
|
if (eth->rx.packet_length >
|
|
GET_FIELD (eth->regs.packetlen, ETH_PACKETLEN, MAXFL))
|
|
SET_FLAG (eth->rx.bd, ETH_RX_BD, TOOBIG);
|
|
*/
|
|
eth->regs.bd_ram[eth->rx.bd_index] = eth->rx.bd;
|
|
|
|
/* advance to next BD */
|
|
if (TEST_FLAG (eth->rx.bd, ETH_RX_BD, WRAP)
|
|
|| eth->rx.bd_index >= ETH_BD_COUNT)
|
|
eth->rx.bd_index = eth->regs.tx_bd_num << 1;
|
|
else
|
|
eth->rx.bd_index += 2;
|
|
|
|
SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, RXB);
|
/* -------------------------------------------------------------------------- */
|
|
/*!Ignore a packet from the outside world.
|
|
|
if ((TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, RXB_M)) &&
|
We don't have a BD ready, so any packets waiting should be thrown away.
|
(TEST_FLAG (eth->rx.bd, ETH_RX_BD, IRQ)) &&
|
|
!eth->int_line_stat)
|
@param[in] eth The Ethernet data structure. */
|
|
/* -------------------------------------------------------------------------- */
|
|
static void
|
|
eth_ignore_packet (struct eth_device *eth)
|
|
{
|
|
unsigned char buf[ETH_MAXPL];
|
|
ssize_t nread = eth_read_packet (eth, buf);
|
|
|
|
if (nread < 0)
|
|
{
|
|
fprintf (stderr,
|
|
"Warning: Read of when Ethernet busy failed %s.\n",
|
|
strerror (errno));
|
|
}
|
|
else if (nread > 0)
|
|
{
|
|
/* Record that a packet was thrown away. */
|
|
SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, BUSY);
|
|
PRINTF ("Ethernet discarding %d bytes from TAP while BD full.\n",
|
|
nread);
|
|
|
|
/* Raise an interrupt if necessary. */
|
|
if (TEST_FLAG (eth->regs.int_mask, ETH_INT_MASK, BUSY_M))
|
|
{
|
|
if (eth->int_line_stat)
|
|
{
|
|
fprintf (stderr, "Warning: Interrupt active during ignore.\n");
|
|
}
|
|
else
|
{
|
{
|
#if ETH_DEBUG
|
#if ETH_DEBUG
|
printf ("ETH_RXSTATE_WRITEFIFO interrupt\n");
|
printf ("Ethernet Rx BUSY interrupt\n");
|
#endif
|
#endif
|
report_interrupt (eth->mac_int);
|
report_interrupt (eth->mac_int);
|
eth->int_line_stat = 1;
|
eth->int_line_stat = 1;
|
}
|
}
|
|
}
|
|
}
|
|
} /* eth_ignore_packet () */
|
|
|
/* ready to receive next packet */
|
|
eth->rx.state = ETH_RXSTATE_IDLE;
|
/* -------------------------------------------------------------------------- */
|
|
/*!Rx clock function.
|
|
|
|
Responsible for starting and completing any RX actions.
|
|
|
|
The original version had 4 states, which allowed modeling the transfer of
|
|
data one byte per cycle. For now we use only the one state for
|
|
efficiency. When the buffer is empty, we fill it from the external world.
|
|
|
|
We schedule to wake up again each cycle. This means we will get called when
|
|
the core is still processing the previous interrupt. To avoid races, we do
|
|
nothing until the interrupt is cleared.
|
|
|
|
@todo We should eventually reinstate the one byte per cycle transfer.
|
|
|
|
@param[in] dat The Ethernet data structure, passed as a void pointer. */
|
|
/* -------------------------------------------------------------------------- */
|
|
static void
|
|
eth_controller_rx_clock (void *dat)
|
|
{
|
|
struct eth_device *eth = dat;
|
|
|
|
/* Only do anything if there is not an interrupt outstanding. */
|
|
if (!eth->int_line_stat)
|
|
{
|
|
/* First word of the BD is flags, where we can test if it's ready. */
|
|
if (TEST_FLAG (eth->regs.bd_ram[eth->rx_bd_index], ETH_RX_BD, READY))
|
|
{
|
|
/* The BD is empty, so we try to fill it with data from the outside
|
|
world. */
|
|
eth_fill_bd (eth); /* BD ready to be filled. */
|
|
}
|
|
else if ((TEST_FLAG (eth->regs.moder, ETH_MODER, RXEN)) &&
|
|
(ETH_RTX_FILE == eth->rtx_type))
|
|
{
|
|
/* The BD is full, Rx is enabled and we are reading from an external
|
|
TAP interface. We can't take any more, so we'll throw oustanding
|
|
input packets on the floor.
|
|
|
|
@note We don't do this for file I/O, since it would discard
|
|
everything immediately! */
|
|
eth_ignore_packet (eth);
|
}
|
}
|
break;
|
|
}
|
}
|
|
|
/* Reschedule. Was 10 ticks when waiting (ETH_RXSTATE_RECV). Now always 1
|
/* Whatever happens, we reschedule a wake up in the future. This used to be
|
tick. */
|
every 10 ticks, but now it is very 1 tick. */
|
SCHED_ADD (eth_controller_rx_clock, dat, 1);
|
SCHED_ADD (eth_controller_rx_clock, dat, 1);
|
}
|
|
|
} /* eth_controller_rx_clock () */
|
|
|
|
|
/* ========================================================================= */
|
/* ========================================================================= */
|
|
|
/* ========================================================================= */
|
/* ========================================================================= */
|
|
|
|
|
/*
|
/*
|
* VAPI connection to outside
|
* VAPI connection to outside
|
*/
|
*/
|
static void
|
static void
|
eth_vapi_read (unsigned long id, unsigned long data, void *dat)
|
eth_vapi_read (unsigned long id, unsigned long data, void *dat)
|
{
|
{
|
unsigned long which;
|
unsigned long which;
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
|
which = id - eth->base_vapi_id;
|
which = id - eth->base_vapi_id;
|
|
|
if (!eth)
|
if (!eth)
|
{
|
{
|
return;
|
return;
|
}
|
}
|
|
|
switch (which)
|
switch (which)
|
{
|
{
|
case ETH_VAPI_DATA:
|
case ETH_VAPI_DATA:
|
break;
|
break;
|
case ETH_VAPI_CTRL:
|
case ETH_VAPI_CTRL:
|
break;
|
break;
|
}
|
}
|
}
|
}
|
|
|
/* -------------------------------------------------------------------------- */
|
/* -------------------------------------------------------------------------- */
|
/*!Reset the Ethernet.
|
/*!Reset the Ethernet.
|
|
|
Open the correct type of simulation interface to the outside world.
|
Open the correct type of simulation interface to the outside world.
|
|
|
Initialize all registers to default and places devices in memory address
|
Initialize all registers to default and places devices in memory address
|
space.
|
space.
|
|
|
@param[in] dat The Ethernet interface data structure. */
|
@param[in] dat The Ethernet interface data structure. */
|
/* -------------------------------------------------------------------------- */
|
/* -------------------------------------------------------------------------- */
|
static void
|
static void
|
eth_reset (void *dat)
|
eth_reset (void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
struct ifreq ifr;
|
struct ifreq ifr;
|
|
|
#if ETH_DEBUG
|
#if ETH_DEBUG
|
printf ("Resetting Ethernet\n");
|
printf ("Resetting Ethernet\n");
|
#endif
|
#endif
|
/* Nothing to do if we do not have a base address set.
|
/* Nothing to do if we do not have a base address set.
|
|
|
TODO: Surely this should test for being enabled? */
|
TODO: Surely this should test for being enabled? */
|
if (0 == eth->baseaddr)
|
if (0 == eth->baseaddr)
|
{
|
{
|
return;
|
return;
|
}
|
}
|
|
|
switch (eth->rtx_type)
|
switch (eth->rtx_type)
|
{
|
{
|
case ETH_RTX_FILE:
|
case ETH_RTX_FILE:
|
|
|
/* (Re-)open TX/RX files */
|
/* (Re-)open TX/RX files */
|
if (eth->rxfd >= 0)
|
if (eth->rxfd >= 0)
|
{
|
{
|
close (eth->rxfd);
|
close (eth->rxfd);
|
}
|
}
|
|
|
if (eth->txfd >= 0)
|
if (eth->txfd >= 0)
|
{
|
{
|
close (eth->txfd);
|
close (eth->txfd);
|
}
|
}
|
|
|
eth->rxfd = -1;
|
eth->rxfd = -1;
|
eth->txfd = -1;
|
eth->txfd = -1;
|
|
|
eth->rxfd = open (eth->rxfile, O_RDONLY);
|
eth->rxfd = open (eth->rxfile, O_RDONLY);
|
if (eth->rxfd < 0)
|
if (eth->rxfd < 0)
|
{
|
{
|
fprintf (stderr, "Warning: Cannot open Ethernet RX file \"%s\": %s\n",
|
fprintf (stderr, "Warning: Cannot open Ethernet RX file \"%s\": %s\n",
|
eth->rxfile, strerror (errno));
|
eth->rxfile, strerror (errno));
|
}
|
}
|
|
|
eth->txfd = open (eth->txfile,
|
eth->txfd = open (eth->txfile,
|
#if defined(O_SYNC) /* BSD/MacOS X doesn't know about O_SYNC */
|
#if defined(O_SYNC) /* BSD/MacOS X doesn't know about O_SYNC */
|
O_SYNC |
|
O_SYNC |
|
#endif
|
#endif
|
O_RDWR | O_CREAT | O_APPEND,
|
O_RDWR | O_CREAT | O_APPEND,
|
S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
|
S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
|
if (eth->txfd < 0)
|
if (eth->txfd < 0)
|
{
|
{
|
fprintf (stderr, "Warning: Cannot open Ethernet TX file \"%s\": %s\n",
|
fprintf (stderr, "Warning: Cannot open Ethernet TX file \"%s\": %s\n",
|
eth->txfile, strerror (errno));
|
eth->txfile, strerror (errno));
|
}
|
}
|
|
|
eth->loopback_offset = lseek (eth->txfd, 0, SEEK_END);
|
|
break;
|
break;
|
|
|
case ETH_RTX_TAP:
|
case ETH_RTX_TAP:
|
|
|
/* (Re-)open TAP interface if necessary */
|
/* (Re-)open TAP interface if necessary */
|
if (eth->rtx_fd != 0)
|
if (eth->rtx_fd != 0)
|
{
|
{
|
break;
|
break;
|
}
|
}
|
|
|
/* Open the TUN/TAP device */
|
/* Open the TUN/TAP device */
|
eth->rtx_fd = open ("/dev/net/tun", O_RDWR);
|
eth->rtx_fd = open ("/dev/net/tun", O_RDWR);
|
if( eth->rtx_fd < 0 )
|
if( eth->rtx_fd < 0 )
|
{
|
{
|
fprintf (stderr, "Warning: Failed to open TUN/TAP device: %s\n",
|
fprintf (stderr, "Warning: Failed to open TUN/TAP device: %s\n",
|
strerror (errno));
|
strerror (errno));
|
eth->rtx_fd = 0;
|
eth->rtx_fd = 0;
|
return;
|
return;
|
}
|
}
|
|
|
/* Turn it into a specific TAP device. If we haven't specified a
|
/* Turn it into a specific TAP device. If we haven't specified a
|
specific (persistent) device, one will be created, but that requires
|
specific (persistent) device, one will be created, but that requires
|
superuser, or at least CAP_NET_ADMIN capabilities. */
|
superuser, or at least CAP_NET_ADMIN capabilities. */
|
memset (&ifr, 0, sizeof(ifr));
|
memset (&ifr, 0, sizeof(ifr));
|
ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
|
ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
|
strncpy (ifr.ifr_name, eth->tap_dev, IFNAMSIZ);
|
strncpy (ifr.ifr_name, eth->tap_dev, IFNAMSIZ);
|
|
|
if (ioctl (eth->rtx_fd, TUNSETIFF, (void *) &ifr) < 0)
|
if (ioctl (eth->rtx_fd, TUNSETIFF, (void *) &ifr) < 0)
|
{
|
{
|
fprintf (stderr, "Warning: Failed to set TAP device: %s\n",
|
fprintf (stderr, "Warning: Failed to set TAP device: %s\n",
|
strerror (errno));
|
strerror (errno));
|
close (eth->rtx_fd);
|
close (eth->rtx_fd);
|
eth->rtx_fd = 0;
|
eth->rtx_fd = 0;
|
return;
|
return;
|
}
|
}
|
#if ETH_DEBUG
|
#if ETH_DEBUG
|
PRINTF ("Opened TAP %s\n", ifr.ifr_name);
|
PRINTF ("Opened TAP %s\n", ifr.ifr_name);
|
#endif
|
#endif
|
/* Do we need to flush any packets? */
|
/* Do we need to flush any packets? */
|
break;
|
break;
|
}
|
}
|
|
|
/* Set registers to default values */
|
/* Set registers to default values */
|
memset (&(eth->regs), 0, sizeof (eth->regs));
|
memset (&(eth->regs), 0, sizeof (eth->regs));
|
|
|
eth->regs.moder = 0x0000A000;
|
eth->regs.moder = 0x0000A000;
|
eth->regs.ipgt = 0x00000012;
|
eth->regs.ipgt = 0x00000012;
|
eth->regs.ipgr1 = 0x0000000C;
|
eth->regs.ipgr1 = 0x0000000C;
|
eth->regs.ipgr2 = 0x00000012;
|
eth->regs.ipgr2 = 0x00000012;
|
eth->regs.packetlen = 0x003C0600;
|
eth->regs.packetlen = 0x003C0600;
|
eth->regs.collconf = 0x000F003F;
|
eth->regs.collconf = 0x000F003F;
|
eth->regs.miimoder = 0x00000064;
|
eth->regs.miimoder = 0x00000064;
|
eth->regs.tx_bd_num = 0x00000040;
|
eth->regs.tx_bd_num = 0x00000040;
|
|
|
/* Clear TX/RX status and initialize buffer descriptor index. */
|
/* Reset TX/RX BD indexes. The Rx BD indexes start after the Tx BD indexes. */
|
memset (&(eth->tx), 0, sizeof (eth->tx));
|
eth->tx_bd_index = 0;
|
memset (&(eth->rx), 0, sizeof (eth->rx));
|
eth->rx_bd_index = eth->regs.tx_bd_num * 2;
|
|
|
/* Reset TX/RX BD indexes */
|
|
eth->tx.bd_index = 0;
|
|
eth->rx.bd_index = eth->regs.tx_bd_num << 1;
|
|
|
|
/* Reset IRQ line status */
|
/* Reset IRQ line status */
|
eth->int_line_stat = 0;
|
eth->int_line_stat = 0;
|
|
|
/* Initialize VAPI */
|
/* Initialize VAPI */
|
if (eth->base_vapi_id)
|
if (eth->base_vapi_id)
|
{
|
{
|
vapi_install_multi_handler (eth->base_vapi_id, ETH_NUM_VAPI_IDS,
|
vapi_install_multi_handler (eth->base_vapi_id, ETH_NUM_VAPI_IDS,
|
eth_vapi_read, dat);
|
eth_vapi_read, dat);
|
}
|
}
|
} /* eth_reset () */
|
} /* eth_reset () */
|
|
|
|
|
/*
|
/*
|
Print register values on stdout
|
Print register values on stdout
|
*/
|
*/
|
static void
|
static void
|
eth_status (void *dat)
|
eth_status (void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
|
PRINTF ("\nEthernet MAC at 0x%" PRIxADDR ":\n", eth->baseaddr);
|
PRINTF ("\nEthernet MAC at 0x%" PRIxADDR ":\n", eth->baseaddr);
|
PRINTF ("MODER : 0x%08lX\n", eth->regs.moder);
|
PRINTF ("MODER : 0x%08lX\n", eth->regs.moder);
|
PRINTF ("INT_SOURCE : 0x%08lX\n", eth->regs.int_source);
|
PRINTF ("INT_SOURCE : 0x%08lX\n", eth->regs.int_source);
|
PRINTF ("INT_MASK : 0x%08lX\n", eth->regs.int_mask);
|
PRINTF ("INT_MASK : 0x%08lX\n", eth->regs.int_mask);
|
PRINTF ("IPGT : 0x%08lX\n", eth->regs.ipgt);
|
PRINTF ("IPGT : 0x%08lX\n", eth->regs.ipgt);
|
PRINTF ("IPGR1 : 0x%08lX\n", eth->regs.ipgr1);
|
PRINTF ("IPGR1 : 0x%08lX\n", eth->regs.ipgr1);
|
PRINTF ("IPGR2 : 0x%08lX\n", eth->regs.ipgr2);
|
PRINTF ("IPGR2 : 0x%08lX\n", eth->regs.ipgr2);
|
PRINTF ("PACKETLEN : 0x%08lX\n", eth->regs.packetlen);
|
PRINTF ("PACKETLEN : 0x%08lX\n", eth->regs.packetlen);
|
PRINTF ("COLLCONF : 0x%08lX\n", eth->regs.collconf);
|
PRINTF ("COLLCONF : 0x%08lX\n", eth->regs.collconf);
|
PRINTF ("TX_BD_NUM : 0x%08lX\n", eth->regs.tx_bd_num);
|
PRINTF ("TX_BD_NUM : 0x%08lX\n", eth->regs.tx_bd_num);
|
PRINTF ("CTRLMODER : 0x%08lX\n", eth->regs.controlmoder);
|
PRINTF ("CTRLMODER : 0x%08lX\n", eth->regs.controlmoder);
|
PRINTF ("MIIMODER : 0x%08lX\n", eth->regs.miimoder);
|
PRINTF ("MIIMODER : 0x%08lX\n", eth->regs.miimoder);
|
PRINTF ("MIICOMMAND : 0x%08lX\n", eth->regs.miicommand);
|
PRINTF ("MIICOMMAND : 0x%08lX\n", eth->regs.miicommand);
|
PRINTF ("MIIADDRESS : 0x%08lX\n", eth->regs.miiaddress);
|
PRINTF ("MIIADDRESS : 0x%08lX\n", eth->regs.miiaddress);
|
PRINTF ("MIITX_DATA : 0x%08lX\n", eth->regs.miitx_data);
|
PRINTF ("MIITX_DATA : 0x%08lX\n", eth->regs.miitx_data);
|
PRINTF ("MIIRX_DATA : 0x%08lX\n", eth->regs.miirx_data);
|
PRINTF ("MIIRX_DATA : 0x%08lX\n", eth->regs.miirx_data);
|
PRINTF ("MIISTATUS : 0x%08lX\n", eth->regs.miistatus);
|
PRINTF ("MIISTATUS : 0x%08lX\n", eth->regs.miistatus);
|
PRINTF ("MAC Address : %02X:%02X:%02X:%02X:%02X:%02X\n",
|
PRINTF ("MAC Address : %02X:%02X:%02X:%02X:%02X:%02X\n",
|
eth->mac_address[0], eth->mac_address[1], eth->mac_address[2],
|
eth->mac_address[5], eth->mac_address[4], eth->mac_address[3],
|
eth->mac_address[3], eth->mac_address[4], eth->mac_address[5]);
|
eth->mac_address[2], eth->mac_address[1], eth->mac_address[0]);
|
PRINTF ("HASH0 : 0x%08lX\n", eth->regs.hash0);
|
PRINTF ("HASH0 : 0x%08lX\n", eth->regs.hash0);
|
PRINTF ("HASH1 : 0x%08lX\n", eth->regs.hash1);
|
PRINTF ("HASH1 : 0x%08lX\n", eth->regs.hash1);
|
}
|
}
|
|
|
/* ========================================================================= */
|
/* ========================================================================= */
|
|
|
|
|
/*
|
/*
|
Read a register
|
Read a register
|
*/
|
*/
|
static uint32_t
|
static uint32_t
|
eth_read32 (oraddr_t addr, void *dat)
|
eth_read32 (oraddr_t addr, void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
|
switch (addr)
|
switch (addr)
|
{
|
{
|
case ETH_MODER:
|
case ETH_MODER:
|
return eth->regs.moder;
|
return eth->regs.moder;
|
case ETH_INT_SOURCE:
|
case ETH_INT_SOURCE:
|
return eth->regs.int_source;
|
return eth->regs.int_source;
|
case ETH_INT_MASK:
|
case ETH_INT_MASK:
|
return eth->regs.int_mask;
|
return eth->regs.int_mask;
|
case ETH_IPGT:
|
case ETH_IPGT:
|
return eth->regs.ipgt;
|
return eth->regs.ipgt;
|
case ETH_IPGR1:
|
case ETH_IPGR1:
|
return eth->regs.ipgr1;
|
return eth->regs.ipgr1;
|
case ETH_IPGR2:
|
case ETH_IPGR2:
|
return eth->regs.ipgr2;
|
return eth->regs.ipgr2;
|
case ETH_PACKETLEN:
|
case ETH_PACKETLEN:
|
return eth->regs.packetlen;
|
return eth->regs.packetlen;
|
case ETH_COLLCONF:
|
case ETH_COLLCONF:
|
return eth->regs.collconf;
|
return eth->regs.collconf;
|
case ETH_TX_BD_NUM:
|
case ETH_TX_BD_NUM:
|
return eth->regs.tx_bd_num;
|
return eth->regs.tx_bd_num;
|
case ETH_CTRLMODER:
|
case ETH_CTRLMODER:
|
return eth->regs.controlmoder;
|
return eth->regs.controlmoder;
|
case ETH_MIIMODER:
|
case ETH_MIIMODER:
|
return eth->regs.miimoder;
|
return eth->regs.miimoder;
|
case ETH_MIICOMMAND:
|
case ETH_MIICOMMAND:
|
return eth->regs.miicommand;
|
return eth->regs.miicommand;
|
case ETH_MIIADDRESS:
|
case ETH_MIIADDRESS:
|
return eth->regs.miiaddress;
|
return eth->regs.miiaddress;
|
case ETH_MIITX_DATA:
|
case ETH_MIITX_DATA:
|
return eth->regs.miitx_data;
|
return eth->regs.miitx_data;
|
case ETH_MIIRX_DATA:
|
case ETH_MIIRX_DATA:
|
/*printf("or1ksim: read MIIM RX: 0x%x\n",(int)eth->regs.miirx_data);*/
|
/*printf("or1ksim: read MIIM RX: 0x%x\n",(int)eth->regs.miirx_data);*/
|
return eth->regs.miirx_data;
|
return eth->regs.miirx_data;
|
case ETH_MIISTATUS:
|
case ETH_MIISTATUS:
|
return eth->regs.miistatus;
|
return eth->regs.miistatus;
|
case ETH_MAC_ADDR0:
|
case ETH_MAC_ADDR0:
|
return (((unsigned long) eth->mac_address[3]) << 24) |
|
return (((unsigned long) eth->mac_address[2]) << 24) |
|
(((unsigned long) eth->mac_address[2]) << 16) |
|
(((unsigned long) eth->mac_address[3]) << 16) |
|
(((unsigned long) eth->mac_address[1]) << 8) |
|
(((unsigned long) eth->mac_address[4]) << 8) |
|
(unsigned long) eth->mac_address[0];
|
(unsigned long) eth->mac_address[5];
|
case ETH_MAC_ADDR1:
|
case ETH_MAC_ADDR1:
|
return (((unsigned long) eth->mac_address[5]) << 8) |
|
return (((unsigned long) eth->mac_address[0]) << 8) |
|
(unsigned long) eth->mac_address[4];
|
(unsigned long) eth->mac_address[1];
|
case ETH_HASH0:
|
case ETH_HASH0:
|
return eth->regs.hash0;
|
return eth->regs.hash0;
|
case ETH_HASH1:
|
case ETH_HASH1:
|
return eth->regs.hash1;
|
return eth->regs.hash1;
|
/*case ETH_DMA_RX_TX: return eth_rx( eth ); */
|
/*case ETH_DMA_RX_TX: return eth_rx( eth ); */
|
}
|
}
|
|
|
if ((addr >= ETH_BD_BASE) && (addr < ETH_BD_BASE + ETH_BD_SPACE))
|
if ((addr >= ETH_BD_BASE) && (addr < ETH_BD_BASE + ETH_BD_SPACE))
|
return eth->regs.bd_ram[(addr - ETH_BD_BASE) / 4];
|
return eth->regs.bd_ram[(addr - ETH_BD_BASE) / 4];
|
|
|
PRINTF ("eth_read32( 0x%" PRIxADDR " ): Illegal address\n",
|
PRINTF ("eth_read32( 0x%" PRIxADDR " ): Illegal address\n",
|
addr + eth->baseaddr);
|
addr + eth->baseaddr);
|
return 0;
|
return 0;
|
}
|
}
|
|
|
/* ========================================================================= */
|
/* ========================================================================= */
|
|
|
|
|
/*
|
/*
|
Write a register
|
Write a register
|
*/
|
*/
|
static void
|
static void
|
eth_write32 (oraddr_t addr, uint32_t value, void *dat)
|
eth_write32 (oraddr_t addr, uint32_t value, void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
unsigned char buf[ETH_MAXPL];
|
|
|
switch (addr)
|
switch (addr)
|
{
|
{
|
case ETH_MODER:
|
case ETH_MODER:
|
#if ETH_DEBUG
|
#if ETH_DEBUG
|
printf("eth_write32: MODER 0x%x\n",value);
|
printf("eth_write32: MODER 0x%x\n",value);
|
#endif
|
#endif
|
if (!TEST_FLAG (eth->regs.moder, ETH_MODER, RXEN) &&
|
if (!TEST_FLAG (eth->regs.moder, ETH_MODER, RXEN) &&
|
TEST_FLAG (value, ETH_MODER, RXEN))
|
TEST_FLAG (value, ETH_MODER, RXEN))
|
{
|
{
|
// Reset RX BD index
|
// Reset RX BD index
|
eth->rx.bd_index = eth->regs.tx_bd_num << 1;
|
eth->rx_bd_index = eth->regs.tx_bd_num << 1;
|
|
|
// Clear TAP
|
// Clear TAP
|
{
|
{
|
/* Poll to see if there is data to read */
|
/* Poll to see if there is data to read */
|
struct pollfd fds[1];
|
struct pollfd fds[1];
|
int n;
|
int n;
|
int nread;
|
int nread;
|
|
|
fds[0].fd = eth->rtx_fd;
|
fds[0].fd = eth->rtx_fd;
|
fds[0].events = POLLIN;
|
fds[0].events = POLLIN;
|
|
|
do {
|
do {
|
n = poll (fds, 1, 0);
|
n = poll (fds, 1, 0);
|
if (n < 0)
|
if (n < 0)
|
{
|
{
|
fprintf (stderr, "Warning: Poll in while emptying TAP: %s: ignored.\n",
|
fprintf (stderr, "Warning: Poll in while emptying TAP: %s: ignored.\n",
|
strerror (errno));
|
strerror (errno));
|
}
|
}
|
else if ((n > 0) && ((fds[0].revents & POLLIN) == POLLIN))
|
else if ((n > 0) && ((fds[0].revents & POLLIN) == POLLIN))
|
{
|
{
|
nread = read (eth->rtx_fd, eth->rx_buff, ETH_MAXPL);
|
nread = read (eth->rtx_fd, buf, ETH_MAXPL);
|
|
|
if (nread < 0)
|
if (nread < 0)
|
{
|
{
|
fprintf (stderr,
|
fprintf (stderr,
|
"Warning: Read failed %s: ignored\n",
|
"Warning: Read failed %s: ignored\n",
|
strerror (errno));
|
strerror (errno));
|
}
|
}
|
}
|
}
|
} while (n > 0);
|
} while (n > 0);
|
}
|
}
|
|
|
SCHED_ADD (eth_controller_rx_clock, dat, 1);
|
SCHED_ADD (eth_controller_rx_clock, dat, 1);
|
}
|
}
|
else if (!TEST_FLAG (value, ETH_MODER, RXEN) &&
|
else if (!TEST_FLAG (value, ETH_MODER, RXEN) &&
|
TEST_FLAG (eth->regs.moder, ETH_MODER, RXEN))
|
TEST_FLAG (eth->regs.moder, ETH_MODER, RXEN))
|
SCHED_FIND_REMOVE (eth_controller_rx_clock, dat);
|
SCHED_FIND_REMOVE (eth_controller_rx_clock, dat);
|
|
|
if (!TEST_FLAG (eth->regs.moder, ETH_MODER, TXEN) &&
|
if (!TEST_FLAG (eth->regs.moder, ETH_MODER, TXEN) &&
|
TEST_FLAG (value, ETH_MODER, TXEN))
|
TEST_FLAG (value, ETH_MODER, TXEN))
|
{
|
{
|
eth->tx.bd_index = 0;
|
eth->tx_bd_index = 0;
|
SCHED_ADD (eth_controller_tx_clock, dat, 1);
|
SCHED_ADD (eth_controller_tx_clock, dat, 1);
|
}
|
}
|
else if (!TEST_FLAG (value, ETH_MODER, TXEN) &&
|
else if (!TEST_FLAG (value, ETH_MODER, TXEN) &&
|
TEST_FLAG (eth->regs.moder, ETH_MODER, TXEN))
|
TEST_FLAG (eth->regs.moder, ETH_MODER, TXEN))
|
SCHED_FIND_REMOVE (eth_controller_tx_clock, dat);
|
SCHED_FIND_REMOVE (eth_controller_tx_clock, dat);
|
|
|
eth->regs.moder = value;
|
eth->regs.moder = value;
|
|
|
if (TEST_FLAG (value, ETH_MODER, RST))
|
if (TEST_FLAG (value, ETH_MODER, RST))
|
eth_reset (dat);
|
eth_reset (dat);
|
return;
|
return;
|
case ETH_INT_SOURCE:
|
case ETH_INT_SOURCE:
|
#if ETH_DEBUG
|
#if ETH_DEBUG
|
printf("eth_write32: INT_SOURCE 0x%x\n",value);
|
printf("eth_write32: INT_SOURCE 0x%x\n",value);
|
#endif
|
#endif
|
eth->regs.int_source &= ~value;
|
eth->regs.int_source &= ~value;
|
|
|
// Clear IRQ line if all interrupt sources have been dealt with
|
// Clear IRQ line if all interrupt sources have been dealt with
|
if (!(eth->regs.int_source & eth->regs.int_mask) && eth->int_line_stat)
|
if (!(eth->regs.int_source & eth->regs.int_mask) && eth->int_line_stat)
|
{
|
{
|
clear_interrupt (eth->mac_int);
|
clear_interrupt (eth->mac_int);
|
eth->int_line_stat = 0;
|
eth->int_line_stat = 0;
|
}
|
}
|
|
|
return;
|
return;
|
case ETH_INT_MASK:
|
case ETH_INT_MASK:
|
#if ETH_DEBUG
|
#if ETH_DEBUG
|
printf("eth_write32: INT_MASK 0x%x\n",value);
|
printf("eth_write32: INT_MASK 0x%x\n",value);
|
#endif
|
#endif
|
eth->regs.int_mask = value;
|
eth->regs.int_mask = value;
|
if ((eth->regs.int_source & eth->regs.int_mask) && !eth->int_line_stat)
|
if ((eth->regs.int_source & eth->regs.int_mask) && !eth->int_line_stat)
|
report_interrupt (eth->mac_int);
|
report_interrupt (eth->mac_int);
|
else
|
else
|
if (eth->int_line_stat)
|
if (eth->int_line_stat)
|
{
|
{
|
clear_interrupt (eth->mac_int);
|
clear_interrupt (eth->mac_int);
|
eth->int_line_stat = 0;
|
eth->int_line_stat = 0;
|
}
|
}
|
return;
|
return;
|
case ETH_IPGT:
|
case ETH_IPGT:
|
eth->regs.ipgt = value;
|
eth->regs.ipgt = value;
|
return;
|
return;
|
case ETH_IPGR1:
|
case ETH_IPGR1:
|
eth->regs.ipgr1 = value;
|
eth->regs.ipgr1 = value;
|
return;
|
return;
|
case ETH_IPGR2:
|
case ETH_IPGR2:
|
eth->regs.ipgr2 = value;
|
eth->regs.ipgr2 = value;
|
return;
|
return;
|
case ETH_PACKETLEN:
|
case ETH_PACKETLEN:
|
eth->regs.packetlen = value;
|
eth->regs.packetlen = value;
|
return;
|
return;
|
case ETH_COLLCONF:
|
case ETH_COLLCONF:
|
eth->regs.collconf = value;
|
eth->regs.collconf = value;
|
return;
|
return;
|
case ETH_TX_BD_NUM:
|
case ETH_TX_BD_NUM:
|
/* When TX_BD_NUM is written, also reset current RX BD index */
|
/* When TX_BD_NUM is written, also reset current RX BD index */
|
eth->regs.tx_bd_num = value & 0xFF;
|
eth->regs.tx_bd_num = value & 0xFF;
|
eth->rx.bd_index = eth->regs.tx_bd_num << 1;
|
eth->rx_bd_index = eth->regs.tx_bd_num << 1;
|
return;
|
return;
|
case ETH_CTRLMODER:
|
case ETH_CTRLMODER:
|
eth->regs.controlmoder = value;
|
eth->regs.controlmoder = value;
|
return;
|
return;
|
case ETH_MIIMODER:
|
case ETH_MIIMODER:
|
eth->regs.miimoder = value;
|
eth->regs.miimoder = value;
|
return;
|
return;
|
case ETH_MIICOMMAND:
|
case ETH_MIICOMMAND:
|
eth->regs.miicommand = value;
|
eth->regs.miicommand = value;
|
/* Perform MIIM transaction, if required */
|
/* Perform MIIM transaction, if required */
|
eth_miim_trans (eth);
|
eth_miim_trans (eth);
|
return;
|
return;
|
case ETH_MIIADDRESS:
|
case ETH_MIIADDRESS:
|
eth->regs.miiaddress = value;
|
eth->regs.miiaddress = value;
|
return;
|
return;
|
case ETH_MIITX_DATA:
|
case ETH_MIITX_DATA:
|
eth->regs.miitx_data = value;
|
eth->regs.miitx_data = value;
|
return;
|
return;
|
case ETH_MIIRX_DATA:
|
case ETH_MIIRX_DATA:
|
/* Register is R/O
|
/* Register is R/O
|
eth->regs.miirx_data = value;
|
eth->regs.miirx_data = value;
|
*/
|
*/
|
return;
|
return;
|
case ETH_MIISTATUS:
|
case ETH_MIISTATUS:
|
/* Register is R/O
|
/* Register is R/O
|
eth->regs.miistatus = value;
|
eth->regs.miistatus = value;
|
*/
|
*/
|
return;
|
return;
|
|
|
case ETH_MAC_ADDR0:
|
case ETH_MAC_ADDR0:
|
eth->mac_address[0] = value & 0xFF;
|
eth->mac_address[5] = value & 0xFF;
|
eth->mac_address[1] = (value >> 8) & 0xFF;
|
eth->mac_address[4] = (value >> 8) & 0xFF;
|
eth->mac_address[2] = (value >> 16) & 0xFF;
|
eth->mac_address[3] = (value >> 16) & 0xFF;
|
eth->mac_address[3] = (value >> 24) & 0xFF;
|
eth->mac_address[2] = (value >> 24) & 0xFF;
|
return;
|
return;
|
case ETH_MAC_ADDR1:
|
case ETH_MAC_ADDR1:
|
eth->mac_address[4] = value & 0xFF;
|
eth->mac_address[1] = value & 0xFF;
|
eth->mac_address[5] = (value >> 8) & 0xFF;
|
eth->mac_address[0] = (value >> 8) & 0xFF;
|
return;
|
return;
|
case ETH_HASH0:
|
case ETH_HASH0:
|
eth->regs.hash0 = value;
|
eth->regs.hash0 = value;
|
return;
|
return;
|
case ETH_HASH1:
|
case ETH_HASH1:
|
eth->regs.hash1 = value;
|
eth->regs.hash1 = value;
|
return;
|
return;
|
|
|
/*case ETH_DMA_RX_TX: eth_tx( eth, value ); return; */
|
/*case ETH_DMA_RX_TX: eth_tx( eth, value ); return; */
|
}
|
}
|
|
|
if ((addr >= ETH_BD_BASE) && (addr < ETH_BD_BASE + ETH_BD_SPACE))
|
if ((addr >= ETH_BD_BASE) && (addr < ETH_BD_BASE + ETH_BD_SPACE))
|
{
|
{
|
eth->regs.bd_ram[(addr - ETH_BD_BASE) / 4] = value;
|
eth->regs.bd_ram[(addr - ETH_BD_BASE) / 4] = value;
|
return;
|
return;
|
}
|
}
|
|
|
PRINTF ("eth_write32( 0x%" PRIxADDR " ): Illegal address\n",
|
PRINTF ("eth_write32( 0x%" PRIxADDR " ): Illegal address\n",
|
addr + eth->baseaddr);
|
addr + eth->baseaddr);
|
return;
|
return;
|
}
|
}
|
|
|
/* ========================================================================= */
|
/* ========================================================================= */
|
|
|
|
|
/* ========================================================================= */
|
/* ========================================================================= */
|
|
|
|
|
|
|
/* ========================================================================= */
|
/* ========================================================================= */
|
|
|
/*-----------------------------------------------[ Ethernet configuration ]---*/
|
/*-----------------------------------------------[ Ethernet configuration ]---*/
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
/*!Enable or disable the Ethernet interface
|
/*!Enable or disable the Ethernet interface
|
|
|
@param[in] val The value to use
|
@param[in] val The value to use
|
@param[in] dat The config data structure */
|
@param[in] dat The config data structure */
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
static void
|
static void
|
eth_enabled (union param_val val,
|
eth_enabled (union param_val val,
|
void *dat)
|
void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
|
eth->enabled = val.int_val;
|
eth->enabled = val.int_val;
|
|
|
} /* eth_enabled() */
|
} /* eth_enabled() */
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
/*!Set the Ethernet interface base address
|
/*!Set the Ethernet interface base address
|
|
|
@param[in] val The value to use
|
@param[in] val The value to use
|
@param[in] dat The config data structure */
|
@param[in] dat The config data structure */
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
static void
|
static void
|
eth_baseaddr (union param_val val,
|
eth_baseaddr (union param_val val,
|
void *dat)
|
void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
|
eth->baseaddr = val.addr_val;
|
eth->baseaddr = val.addr_val;
|
|
|
} /* eth_baseaddr() */
|
} /* eth_baseaddr() */
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
/*!Set the Ethernet DMA port
|
/*!Set the Ethernet DMA port
|
|
|
This is not currently supported, so a warning message is printed.
|
This is not currently supported, so a warning message is printed.
|
|
|
@param[in] val The value to use
|
@param[in] val The value to use
|
@param[in] dat The config data structure */
|
@param[in] dat The config data structure */
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
static void
|
static void
|
eth_dma (union param_val val,
|
eth_dma (union param_val val,
|
void *dat)
|
void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
|
fprintf (stderr, "Warning: External Ethernet DMA not currently supported\n");
|
fprintf (stderr, "Warning: External Ethernet DMA not currently supported\n");
|
eth->dma = val.addr_val;
|
eth->dma = val.addr_val;
|
|
|
} /* eth_dma() */
|
} /* eth_dma() */
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
/*!Set the Ethernet IRQ
|
/*!Set the Ethernet IRQ
|
|
|
@param[in] val The value to use
|
@param[in] val The value to use
|
@param[in] dat The config data structure */
|
@param[in] dat The config data structure */
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
static void
|
static void
|
eth_irq (union param_val val,
|
eth_irq (union param_val val,
|
void *dat)
|
void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
|
eth->mac_int = val.int_val;
|
eth->mac_int = val.int_val;
|
|
|
} /* eth_irq() */
|
} /* eth_irq() */
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
/*!Set the Ethernet interface type
|
/*!Set the Ethernet interface type
|
|
|
Currently two types are supported, file and tap.
|
Currently two types are supported, file and tap.
|
|
|
@param[in] val The value to use. Currently "file" and "tap" are supported.
|
@param[in] val The value to use. Currently "file" and "tap" are supported.
|
@param[in] dat The config data structure */
|
@param[in] dat The config data structure */
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
static void
|
static void
|
eth_rtx_type (union param_val val,
|
eth_rtx_type (union param_val val,
|
void *dat)
|
void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
|
if (0 == strcasecmp ("file", val.str_val))
|
if (0 == strcasecmp ("file", val.str_val))
|
{
|
{
|
printf ("Ethernet FILE type\n");
|
printf ("Ethernet FILE type\n");
|
eth->rtx_type = ETH_RTX_FILE;
|
eth->rtx_type = ETH_RTX_FILE;
|
}
|
}
|
else if (0 == strcasecmp ("tap", val.str_val))
|
else if (0 == strcasecmp ("tap", val.str_val))
|
{
|
{
|
printf ("Ethernet TAP type\n");
|
printf ("Ethernet TAP type\n");
|
eth->rtx_type = ETH_RTX_TAP;
|
eth->rtx_type = ETH_RTX_TAP;
|
}
|
}
|
else
|
else
|
{
|
{
|
fprintf (stderr, "Warning: Unknown Ethernet type: file assumed.\n");
|
fprintf (stderr, "Warning: Unknown Ethernet type: file assumed.\n");
|
eth->rtx_type = ETH_RTX_FILE;
|
eth->rtx_type = ETH_RTX_FILE;
|
}
|
}
|
} /* eth_rtx_type() */
|
} /* eth_rtx_type() */
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
/*!Set the Ethernet DMA Rx channel
|
/*!Set the Ethernet DMA Rx channel
|
|
|
External DMA is not currently supported, so a warning message is printed.
|
External DMA is not currently supported, so a warning message is printed.
|
|
|
@param[in] val The value to use
|
@param[in] val The value to use
|
@param[in] dat The config data structure */
|
@param[in] dat The config data structure */
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
static void
|
static void
|
eth_rx_channel (union param_val val,
|
eth_rx_channel (union param_val val,
|
void *dat)
|
void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
|
fprintf (stderr, "Warning: External Ethernet DMA not currently supported: "
|
fprintf (stderr, "Warning: External Ethernet DMA not currently supported: "
|
"Rx channel ignored\n");
|
"Rx channel ignored\n");
|
eth->rx_channel = val.int_val;
|
eth->rx_channel = val.int_val;
|
|
|
} /* eth_rx_channel() */
|
} /* eth_rx_channel() */
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
/*!Set the Ethernet DMA Tx channel
|
/*!Set the Ethernet DMA Tx channel
|
|
|
External DMA is not currently supported, so a warning message is printed.
|
External DMA is not currently supported, so a warning message is printed.
|
|
|
@param[in] val The value to use
|
@param[in] val The value to use
|
@param[in] dat The config data structure */
|
@param[in] dat The config data structure */
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
static void
|
static void
|
eth_tx_channel (union param_val val,
|
eth_tx_channel (union param_val val,
|
void *dat)
|
void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
|
fprintf (stderr, "Warning: External Ethernet DMA not currently supported: "
|
fprintf (stderr, "Warning: External Ethernet DMA not currently supported: "
|
"Tx channel ignored\n");
|
"Tx channel ignored\n");
|
eth->tx_channel = val.int_val;
|
eth->tx_channel = val.int_val;
|
|
|
} /* eth_tx_channel() */
|
} /* eth_tx_channel() */
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
/*!Set the Ethernet DMA Rx file
|
/*!Set the Ethernet DMA Rx file
|
|
|
Free any previously allocated value.
|
Free any previously allocated value.
|
|
|
@param[in] val The value to use
|
@param[in] val The value to use
|
@param[in] dat The config data structure */
|
@param[in] dat The config data structure */
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
static void
|
static void
|
eth_rxfile (union param_val val,
|
eth_rxfile (union param_val val,
|
void *dat)
|
void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
|
if (NULL != eth->rxfile)
|
if (NULL != eth->rxfile)
|
{
|
{
|
free (eth->rxfile);
|
free (eth->rxfile);
|
eth->rxfile = NULL;
|
eth->rxfile = NULL;
|
}
|
}
|
|
|
if (!(eth->rxfile = strdup (val.str_val)))
|
if (!(eth->rxfile = strdup (val.str_val)))
|
{
|
{
|
fprintf (stderr, "Peripheral Ethernet: Run out of memory\n");
|
fprintf (stderr, "Peripheral Ethernet: Run out of memory\n");
|
exit (-1);
|
exit (-1);
|
}
|
}
|
} /* eth_rxfile() */
|
} /* eth_rxfile() */
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
/*!Set the Ethernet DMA Tx file
|
/*!Set the Ethernet DMA Tx file
|
|
|
Free any previously allocated value.
|
Free any previously allocated value.
|
|
|
@param[in] val The value to use
|
@param[in] val The value to use
|
@param[in] dat The config data structure */
|
@param[in] dat The config data structure */
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
static void
|
static void
|
eth_txfile (union param_val val,
|
eth_txfile (union param_val val,
|
void *dat)
|
void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
|
if (NULL != eth->txfile)
|
if (NULL != eth->txfile)
|
{
|
{
|
free (eth->txfile);
|
free (eth->txfile);
|
eth->txfile = NULL;
|
eth->txfile = NULL;
|
}
|
}
|
|
|
if (!(eth->txfile = strdup (val.str_val)))
|
if (!(eth->txfile = strdup (val.str_val)))
|
{
|
{
|
fprintf (stderr, "Peripheral Ethernet: Run out of memory\n");
|
fprintf (stderr, "Peripheral Ethernet: Run out of memory\n");
|
exit (-1);
|
exit (-1);
|
}
|
}
|
} /* eth_txfile() */
|
} /* eth_txfile() */
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
/*!Set the Ethernet TAP device.
|
/*!Set the Ethernet TAP device.
|
|
|
If we are not superuser (or do not have CAP_NET_ADMIN priviledges), then we
|
If we are not superuser (or do not have CAP_NET_ADMIN priviledges), then we
|
must work with a persistent TAP device that is already set up. This option
|
must work with a persistent TAP device that is already set up. This option
|
specifies the device to user.
|
specifies the device to user.
|
|
|
@param[in] val The value to use.
|
@param[in] val The value to use.
|
@param[in] dat The config data structure */
|
@param[in] dat The config data structure */
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
static void
|
static void
|
eth_tap_dev (union param_val val,
|
eth_tap_dev (union param_val val,
|
void *dat)
|
void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
|
|
if (NULL != eth->tap_dev)
|
if (NULL != eth->tap_dev)
|
{
|
{
|
free (eth->tap_dev);
|
free (eth->tap_dev);
|
eth->tap_dev = NULL;
|
eth->tap_dev = NULL;
|
}
|
}
|
|
|
eth->tap_dev = strdup (val.str_val);
|
eth->tap_dev = strdup (val.str_val);
|
|
|
if (NULL == eth->tap_dev)
|
if (NULL == eth->tap_dev)
|
{
|
{
|
fprintf (stderr, "ERROR: Peripheral Ethernet: Run out of memory\n");
|
fprintf (stderr, "ERROR: Peripheral Ethernet: Run out of memory\n");
|
exit (-1);
|
exit (-1);
|
}
|
}
|
} /* eth_tap_dev() */
|
} /* eth_tap_dev() */
|
|
|
|
|
static void
|
static void
|
eth_vapi_id (union param_val val,
|
eth_vapi_id (union param_val val,
|
void *dat)
|
void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
eth->base_vapi_id = val.int_val;
|
eth->base_vapi_id = val.int_val;
|
}
|
}
|
|
|
|
|
static void
|
static void
|
eth_phy_addr (union param_val val,
|
eth_phy_addr (union param_val val,
|
void *dat)
|
void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
eth->phy_addr = val.int_val & ETH_MIIADDR_FIAD_MASK;
|
eth->phy_addr = val.int_val & ETH_MIIADDR_FIAD_MASK;
|
}
|
}
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
/*!Initialize a new Ethernet configuration
|
/*!Initialize a new Ethernet configuration
|
|
|
ALL parameters are set explicitly to default values. */
|
ALL parameters are set explicitly to default values. */
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
static void *
|
static void *
|
eth_sec_start (void)
|
eth_sec_start (void)
|
{
|
{
|
struct eth_device *new = malloc (sizeof (struct eth_device));
|
struct eth_device *new = malloc (sizeof (struct eth_device));
|
|
|
if (!new)
|
if (!new)
|
{
|
{
|
fprintf (stderr, "Peripheral Eth: Run out of memory\n");
|
fprintf (stderr, "Peripheral Eth: Run out of memory\n");
|
exit (-1);
|
exit (-1);
|
}
|
}
|
|
|
memset (new, 0, sizeof (struct eth_device));
|
memset (new, 0, sizeof (struct eth_device));
|
|
|
new->enabled = 1;
|
new->enabled = 1;
|
new->baseaddr = 0;
|
new->baseaddr = 0;
|
new->dma = 0;
|
new->dma = 0;
|
new->mac_int = 0;
|
new->mac_int = 0;
|
new->int_line_stat= 0;
|
new->int_line_stat= 0;
|
new->rtx_type = ETH_RTX_FILE;
|
new->rtx_type = ETH_RTX_FILE;
|
new->rx_channel = 0;
|
new->rx_channel = 0;
|
new->tx_channel = 0;
|
new->tx_channel = 0;
|
new->rtx_fd = 0;
|
new->rtx_fd = 0;
|
new->rxfile = strdup ("eth_rx");
|
new->rxfile = strdup ("eth_rx");
|
new->txfile = strdup ("eth_tx");
|
new->txfile = strdup ("eth_tx");
|
new->tap_dev = strdup ("");
|
new->tap_dev = strdup ("");
|
new->base_vapi_id = 0;
|
new->base_vapi_id = 0;
|
new->phy_addr = 0;
|
new->phy_addr = 0;
|
|
|
return new;
|
return new;
|
}
|
}
|
|
|
static void
|
static void
|
eth_sec_end (void *dat)
|
eth_sec_end (void *dat)
|
{
|
{
|
struct eth_device *eth = dat;
|
struct eth_device *eth = dat;
|
struct mem_ops ops;
|
struct mem_ops ops;
|
|
|
if (!eth->enabled)
|
if (!eth->enabled)
|
{
|
{
|
free (eth->rxfile);
|
free (eth->rxfile);
|
free (eth->txfile);
|
free (eth->txfile);
|
free (eth->tap_dev);
|
free (eth->tap_dev);
|
free (eth);
|
free (eth);
|
return;
|
return;
|
}
|
}
|
|
|
memset (&ops, 0, sizeof (struct mem_ops));
|
memset (&ops, 0, sizeof (struct mem_ops));
|
|
|
ops.readfunc32 = eth_read32;
|
ops.readfunc32 = eth_read32;
|
ops.writefunc32 = eth_write32;
|
ops.writefunc32 = eth_write32;
|
ops.read_dat32 = dat;
|
ops.read_dat32 = dat;
|
ops.write_dat32 = dat;
|
ops.write_dat32 = dat;
|
|
|
/* FIXME: Correct delay? */
|
/* FIXME: Correct delay? */
|
ops.delayr = 2;
|
ops.delayr = 2;
|
ops.delayw = 2;
|
ops.delayw = 2;
|
reg_mem_area (eth->baseaddr, ETH_ADDR_SPACE, 0, &ops);
|
reg_mem_area (eth->baseaddr, ETH_ADDR_SPACE, 0, &ops);
|
reg_sim_stat (eth_status, dat);
|
reg_sim_stat (eth_status, dat);
|
reg_sim_reset (eth_reset, dat);
|
reg_sim_reset (eth_reset, dat);
|
}
|
}
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
/*!Register a new Ethernet configuration */
|
/*!Register a new Ethernet configuration */
|
/*---------------------------------------------------------------------------*/
|
/*---------------------------------------------------------------------------*/
|
void
|
void
|
reg_ethernet_sec ()
|
reg_ethernet_sec ()
|
{
|
{
|
struct config_section *sec =
|
struct config_section *sec =
|
reg_config_sec ("ethernet", eth_sec_start, eth_sec_end);
|
reg_config_sec ("ethernet", eth_sec_start, eth_sec_end);
|
|
|
reg_config_param (sec, "enabled", PARAMT_INT, eth_enabled);
|
reg_config_param (sec, "enabled", PARAMT_INT, eth_enabled);
|
reg_config_param (sec, "baseaddr", PARAMT_ADDR, eth_baseaddr);
|
reg_config_param (sec, "baseaddr", PARAMT_ADDR, eth_baseaddr);
|
reg_config_param (sec, "dma", PARAMT_INT, eth_dma);
|
reg_config_param (sec, "dma", PARAMT_INT, eth_dma);
|
reg_config_param (sec, "irq", PARAMT_INT, eth_irq);
|
reg_config_param (sec, "irq", PARAMT_INT, eth_irq);
|
reg_config_param (sec, "rtx_type", PARAMT_STR, eth_rtx_type);
|
reg_config_param (sec, "rtx_type", PARAMT_STR, eth_rtx_type);
|
reg_config_param (sec, "rx_channel", PARAMT_INT, eth_rx_channel);
|
reg_config_param (sec, "rx_channel", PARAMT_INT, eth_rx_channel);
|
reg_config_param (sec, "tx_channel", PARAMT_INT, eth_tx_channel);
|
reg_config_param (sec, "tx_channel", PARAMT_INT, eth_tx_channel);
|
reg_config_param (sec, "rxfile", PARAMT_STR, eth_rxfile);
|
reg_config_param (sec, "rxfile", PARAMT_STR, eth_rxfile);
|
reg_config_param (sec, "txfile", PARAMT_STR, eth_txfile);
|
reg_config_param (sec, "txfile", PARAMT_STR, eth_txfile);
|
reg_config_param (sec, "tap_dev", PARAMT_STR, eth_tap_dev);
|
reg_config_param (sec, "tap_dev", PARAMT_STR, eth_tap_dev);
|
reg_config_param (sec, "vapi_id", PARAMT_INT, eth_vapi_id);
|
reg_config_param (sec, "vapi_id", PARAMT_INT, eth_vapi_id);
|
reg_config_param (sec, "phy_addr", PARAMT_INT, eth_phy_addr);
|
reg_config_param (sec, "phy_addr", PARAMT_INT, eth_phy_addr);
|
|
|
} /* reg_ethernet_sec() */
|
} /* reg_ethernet_sec() */
|
|
|
|
|
