######################################################################
#### ####
#### ORPSoC Xilinx Synthesis Makefile ####
#### ####
#### Author(s): ####
#### - Julius Baxter, julius@opencores.org ####
#### ####
#### ####
######################################################################
#### ####
#### Copyright (C) 2009,2010,2011 Authors and OPENCORES.ORG ####
#### ####
#### This source file may be used and distributed without ####
#### restriction provided that this copyright statement is not ####
#### removed from the file and that any derivative work contains ####
#### the original copyright notice and the associated disclaimer. ####
#### ####
#### This source file is free software; you can redistribute it ####
#### and/or modify it under the terms of the GNU Lesser General ####
#### Public License as published by the Free Software Foundation; ####
#### either version 2.1 of the License, or (at your option) any ####
#### later version. ####
#### ####
#### This source is distributed in the hope that it will be ####
#### useful, but WITHOUT ANY WARRANTY; without even the implied ####
#### warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ####
#### PURPOSE. See the GNU Lesser General Public License for more ####
#### details. ####
#### ####
#### You should have received a copy of the GNU Lesser General ####
#### Public License along with this source; if not, download it ####
#### from http://www.opencores.org/lgpl.shtml ####
#### ####
######################################################################
# Name of the directory we're currently in
CUR_DIR=$(shell pwd)
# We don't want the usbhostslave module to be pulled in during synthesis because
# we haven't copied the headers to our RTL director
#COMMON_VERILOG_MODULES_EXCLUDE+= usbhostslave
# The root path of the board build
BOARD_ROOT ?=$(CUR_DIR)/../../..
include $(BOARD_ROOT)/Makefile.inc
RTL_TOP ?=$(DESIGN_NAME)_top
SYN_RUN_DIR=$(BOARD_SYN_DIR)/run
TIMESCALE_FILE=timescale.v
SYNDIR_TIMESCALE_FILE=$(SYN_RUN_DIR)/$(TIMESCALE_FILE)
$(SYNDIR_TIMESCALE_FILE):
$(Q)echo "" > $@
SYN_VERILOG_DEFINES=synthesis-defines.v
SYNDIR_SYN_VERILOG_DEFINES=$(SYN_RUN_DIR)/$(SYN_VERILOG_DEFINES)
$(SYNDIR_SYN_VERILOG_DEFINES):
$(Q)echo "\`define SYNTHESIS" > $@
$(Q)echo "\`define XILINX" >> $@
$(Q)echo "" >> $@
GENERATED_DEFINES = $(BOOTROM_VERILOG)
GENERATED_DEFINES += $(SYNDIR_TIMESCALE_FILE)
GENERATED_DEFINES += $(SYNDIR_SYN_VERILOG_DEFINES)
FPGA_PART ?=xc5vlx50-ff676-1
OPT_MODE ?=Speed
OPT_LEVEL ?=2
XILINX_FLAGS ?=-intstyle silent
XILINX_XST_FLAGS ?= -power NO -glob_opt AllClockNets -write_timing_constraints NO -cross_clock_analysis NO -slice_utilization_ratio 100 -bram_utilization_ratio 100 -dsp_utilization_ratio 100 -safe_implementation No -fsm_style lut -ram_extract Yes -ram_style Auto -rom_extract Yes -rom_style Auto -auto_bram_packing NO -mux_extract YES -mux_style Auto -decoder_extract YES -priority_extract YES -shreg_extract YES -shift_extract YES -xor_collapse YES -resource_sharing YES -async_to_sync NO -use_dsp48 auto -iobuf YES -max_fanout 100000 -bufg 32 -register_duplication YES -equivalent_register_removal YES -register_balancing No -slice_packing YES -optimize_primitives NO -use_clock_enable Auto -use_sync_set Auto -use_sync_reset Auto -iob Auto -slice_utilization_ratio_maxmargin 5
XCF_FILE=$(DESIGN_NAME).xcf
XST_FILE=$(DESIGN_NAME).xst
PRJ_FILE=$(DESIGN_NAME).prj
NGC_FILE=$(DESIGN_NAME).ngc
NETLIST_FILE=$(DESIGN_NAME).v
XST_PRJ_FILE_SRC_DECLARE=verilog work
print-config:
$(Q)echo; echo "\t### Synthesis make configuration ###"; echo
$(Q)echo "\tFPGA_PART="$(FPGA_PART)
$(Q)echo "\tOPT_MODE="$(OPT_MODE)
$(Q)echo "\tOTP_LEVEL="$(OPT_LEVEL)
$(Q)echo "\tXILINX_XST_FLAGS="$(XILINX_XST_FLAGS)
$(Q)echo
all: $(NGC_FILE)
# Generate the .xst file
# See this page for information on options:
# http://www.xilinx.com/itp/xilinx4/data/docs/xst/command_line5.html
$(XST_FILE):
$(Q)echo; echo "\t#### Generating XST file ####"; echo
$(Q)echo "# XST Script for ORPSoC Synthesis" > $@
$(Q)echo "# This file is autogenerated - any changes will be overwritten" >> $@
$(Q)echo "# See the Makefile in syn/xst/bin to make changes" >> $@
$(Q)echo "run" >> $@
$(Q)echo "-ifn "$(PRJ_FILE) >> $@
$(Q)echo "-ifmt mixed" >> $@
$(Q)echo "-top "$(RTL_TOP) >> $@
$(Q)echo "-ofmt NGC" >> $@
$(Q)echo "-ofn "$(NGC_FILE) >> $@
$(Q)echo "-p "$(FPGA_PART) >> $@
$(Q)echo "-opt_level "$(OPT_LEVEL) >> $@
$(Q)echo "-opt_mode "$(OPT_MODE) >> $@
$(Q)echo "-uc "$(XCF_FILE) >> $@
# $(Q)echo "elaborate " >> $@
# $(Q)echo -n "-vlgpath \"" >> $@
# option missing from XST - wtf?! $(Q)for vlogpath in $(VERILOG_SRC_PATHS); do \
echo -n $$vlogpath" "; done >> $@
# $(Q)echo "\"" >> $@
# Give board then common verilog include paths, hoping xst does a sensible thing
# and searches them in order.
$(Q)echo "-vlgincdir { "$(BOARD_RTL_VERILOG_INCLUDE_DIR)" "$(COMMON_RTL_VERILOG_DIR)/include" "$(BOOTROM_SW_DIR) " }" >> $@
$(Q)echo >> $@
# Generate Xilinx project (.prj) file
$(PRJ_FILE): $(RTL_VERILOG_SRC)
$(Q)echo; echo "\t#### Generating Xilinx PRJ file ####";
# $(Q)echo "# Autogenerated XST .prj file" > $@
# $(Q)echo "# Any changes will be written over." >> $@
$(Q)for file in $(RTL_VERILOG_SRC); do \
echo $(XST_PRJ_FILE_SRC_DECLARE) $$file >> $@ ; \
done
$(Q)echo >> $@
$(Q)echo
# Constraints file
$(XCF_FILE):
$(Q)echo; echo "\t#### Generating Xilinx XCF file ####"; echo
$(Q)echo "# Autogenerated XST .prj file" > $@
$(Q)echo "#" >> $@
$(Q)echo "# Not much here, XST is smart enough to determine clocks through DCMs" >> $@
$(Q)echo "#" >> $@
$(Q)echo "# TODO: Potentially use the other XTAL for DDR RAM clocking" >> $@
$(Q)echo "#" >> $@
$(Q)echo "# 200MHz diff. XTAL used as main system clock" >> $@
$(Q)echo "NET \"sys_clk_in_p\" TNM_NET = \"sys_clk_in_p_grp\";" >> $@
$(Q)echo "NET \"sys_clk_in_n\" TNM_NET = \"sys_clk_in_n_grp\";" >> $@
$(Q)echo "TIMESPEC \"TS_sys_clk_in_p_grp\" = PERIOD \"sys_clk_in_p_grp\" 5 ns HIGH 50 %;" >> $@
$(Q)echo "TIMESPEC \"TS_sys_clk_in_n_grp\" = PERIOD \"sys_clk_in_n_grp\" 5 ns LOW 50 %;" >> $@
$(Q)echo "# 100 MHz user clock" >> $@
$(Q)echo "#NET \"sys_clk_in\" TNM_NET = \"sys_clk_in_grp\";" >> $@
$(Q)echo "#TIMESPEC \"TS_sys_clk_in\" = PERIOD \"sys_clk_in_grp\" 10 ns HIGH 50%;" >> $@
$(Q)echo "# Ignore the reset logic" >> $@
$(Q)echo "NET rst_n_pad_i* TIG;" >> $@
$(Q)echo "# SSRAM multicylce constraints:" >> $@
$(Q)echo "# Define the two clock domains as timespecs" >> $@
$(Q)echo "#NET dcm0_clkdv TNM_NET=\"wb_clk\";" >> $@
$(Q)echo "#TIMESPEC \"TS_wb_clk\" = PERIOD \"wb_clk\" 20 ns HIGH 10;" >> $@
$(Q)echo "#NET dcm0_clk0 TNM_NET = \"ssram_clk200\";" >> $@
$(Q)echo "#TIMESPEC \"TS_ssram_clk200\" = PERIOD \"ssram_clk200\" \"TS_wb_clk\" / 4;" >> $@
$(Q)echo "# Now define their relationship - logic should be configured so that there's" >> $@
$(Q)echo "# 1 WB cycle at all times before anything is sampled across domains" >> $@
$(Q)echo "#TIMESPEC \"TS_wb_clk_ssram_clk200\" = from \"wb_clk\" TO \"ssram_clk200\" 15 ns;" >> $@
$(Q)echo "#TIMESPEC \"TS_ssram_clk200_wb_clk\" = from \"ssram_clk200\" TO \"wb_clk\" 20 ns;" >> $@
# XST command
$(NGC_FILE): $(PRJ_FILE) $(XST_FILE) $(XCF_FILE) $(GENERATED_DEFINES)
$(Q)echo; echo "\t#### Running XST ####"; echo;
$(Q)(. $(XILINX_SETTINGS_SCRIPT) ; xst -ifn $(XST_FILE) $(XILINX_FLAGS) $(XST_FLAGS) )
$(Q)echo
netlist: $(NETLIST_FILE)
# Netlist generation command
$(NETLIST_FILE): $(NGC_FILE)
$(Q)echo; echo "\t#### Generating verilog netlist ####"; echo;
$(Q)(. $(XILINX_SETTINGS_SCRIPT) ; \
netgen -sim -aka -dir . -ofmt verilog $< -w $@ )
clean:
$(Q)rm -rf *.* xst
clean-sw:
$(MAKE) -C $(PROJECT_ROOT)/sw/lib distclean
distclean: clean-sw clean
.PRECIOUS : $(NGC_FILE) $(XST_FILE) $(XCF_FILE)
Error running this command: diff -w -U 5 "" "/tmp/b7l136"
diff: : No such file or directory