//
//
//

module asram_if(
                  inout   [15:0]  sram_dq,    //  SRAM Data bus 16 Bits
                  output  [17:0]  sram_addr,  //  SRAM Address bus 18 Bits
                  output          sram_ub_n,  //  SRAM High-byte Data Mask
                  output          sram_lb_n,  //  SRAM Low-byte Data Mask
                  output          sram_we_n,  //  SRAM Write Enable
                  output          sram_ce_n,  //  SRAM Chip Enable
                  output          sram_oe_n,  //  SRAM Output Enable
                  input           wb_clk_i,   // WISHBONE interface
                  input           wb_rst_i,
                  input   [18:0]  wb_adr_i,
                  input   [31:0]  wb_dat_i,
                  input           wb_we_i,
                  input           wb_stb_i,
                  input           wb_cyc_i,
                  input   [3:0]   wb_sel_i,
                  output  [31:0]  wb_dat_o,
                  output          wb_ack_o
                );

                
  //---------------------------------------------------
  // wb_size_bridge  
  wire [15:0] wb_lo_dat_o;
  wire [31:0] wb_lo_adr_o;
  wire        wb_lo_cyc_o;
  wire        wb_lo_stb_o;
  wire        wb_lo_we_o;
  wire [1:0]  wb_lo_sel_o;
  wire        wb_lo_ack_i = 1'b1;
  wire        wb_lo_err_i = 1'b0;
  wire        wb_lo_rty_i = 1'b0;
  
  wb_size_bridge i_wb_size_bridge(
                                    .wb_hi_clk_i(wb_clk_i),
                                    .wb_hi_rst_i(wb_rst_i),
                                    .wb_hi_dat_o(wb_dat_o),
                                    .wb_hi_dat_i(wb_dat_i),
                                    .wb_hi_adr_i( {13'h0000, wb_adr_i} ),
                                    .wb_hi_cyc_i(wb_cyc_i),
                                    .wb_hi_stb_i(wb_stb_i),
                                    .wb_hi_we_i(wb_we_i),
                                    .wb_hi_sel_i(wb_sel_i),
                                    .wb_hi_ack_o(wb_ack_o),
                                    .wb_hi_err_o(),
                                    .wb_hi_rty_o(),
            
                                    .wb_lo_clk_o(),
                                    .wb_lo_rst_o(),
                                    .wb_lo_dat_i(sram_dq),
                                    .wb_lo_dat_o(wb_lo_dat_o),
                                    .wb_lo_adr_o(wb_lo_adr_o),
                                    .wb_lo_cyc_o(wb_lo_cyc_o),
                                    .wb_lo_stb_o(wb_lo_stb_o),
                                    .wb_lo_we_o(wb_lo_we_o),
                                    .wb_lo_sel_o(wb_lo_sel_o),
                                    .wb_lo_ack_i(wb_lo_ack_i),
                                    .wb_lo_err_i(wb_lo_err_i),
                                    .wb_lo_rty_i(wb_lo_rty_i),
                                    
                                    .lo_byte_if_i(1'b0)
                                  );
                
                
  //---------------------------------------------------
  // outputs  
  assign sram_dq    = wb_lo_we_o ? wb_lo_dat_o : 16'hzz;
  assign sram_addr  = wb_lo_adr_o[18:1];
  assign sram_ub_n  = ~wb_lo_sel_o[1];
  assign sram_lb_n  = ~wb_lo_sel_o[0];
  assign sram_we_n  = ~wb_lo_we_o;
//   assign sram_ce_n  = ~(wb_lo_stb_o & wb_lo_cyc_o);
  assign sram_ce_n  = 1'b0;
  assign sram_oe_n  = wb_lo_we_o;
                
  
endmodule


<p>Error running this command: <code>diff -w -U 5 "" "/tmp/MKb9f4"</code></p><p>diff: : No such file or directory</p>