URL
https://opencores.org/ocsvn/ethmac/ethmac/trunk
Subversion Repositories ethmac
[/] [ethmac/] [tags/] [rel_24/] [rtl/] [verilog/] [eth_wishbone.v] - Rev 41
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// eth_wishbone.v //// //// //// //// This file is part of the Ethernet IP core project //// //// http://www.opencores.org/projects/ethmac/ //// //// //// //// Author(s): //// //// - Igor Mohor (igorM@opencores.org) //// //// //// //// All additional information is avaliable in the Readme.txt //// //// file. //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2001 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.3 2002/02/05 16:44:39 mohor // Both rx and tx part are finished. Tested with wb_clk_i between 10 and 200 // MHz. Statuses, overrun, control frame transmission and reception still need // to be fixed. // // Revision 1.2 2002/02/01 12:46:51 mohor // Tx part finished. TxStatus needs to be fixed. Pause request needs to be // added. // // Revision 1.1 2002/01/23 10:47:59 mohor // Initial version. Equals to eth_wishbonedma.v at this moment. // // // // // igor !!! // Napravi, pause frame // Poskusi spremeniti vse signale na wb strani da bodo imeli enake koncnice (npr _wb), // vsi na MTxClk strani pa _txclk // Evaluiraj dato da pre start framom ni prisel abort ali kaj podobnega (kot je bilo v GotData, ki ga zbrisi) // Naj m_wb_err_i vzge status underrun ali uverrun `include "eth_defines.v" `include "timescale.v" module eth_wishbone ( // WISHBONE common WB_CLK_I, WB_DAT_I, WB_DAT_O, // WISHBONE slave WB_ADR_I, WB_SEL_I, WB_WE_I, WB_ACK_O, BDCs, Reset, // WISHBONE master m_wb_adr_o, m_wb_sel_o, m_wb_we_o, m_wb_dat_o, m_wb_dat_i, m_wb_cyc_o, m_wb_stb_o, m_wb_ack_i, m_wb_err_i, //TX MTxClk, TxStartFrm, TxEndFrm, TxUsedData, TxData, StatusIzTxEthMACModula, TxRetry, TxAbort, TxUnderRun, TxDone, TPauseRq, TxPauseTV, PerPacketCrcEn, PerPacketPad, //RX MRxClk, RxData, RxValid, RxStartFrm, RxEndFrm, RxAbort, // Register r_TxEn, r_RxEn, r_TxBDNum, r_DmaEn, TX_BD_NUM_Wr, WillSendControlFrame, TxCtrlEndFrm, // igor !!! WillSendControlFrame gre najbrz ven // Interrupts TxB_IRQ, TxE_IRQ, RxB_IRQ, RxF_IRQ, Busy_IRQ ); parameter Tp = 1; // WISHBONE common input WB_CLK_I; // WISHBONE clock input [31:0] WB_DAT_I; // WISHBONE data input output [31:0] WB_DAT_O; // WISHBONE data output // WISHBONE slave input [9:2] WB_ADR_I; // WISHBONE address input input [3:0] WB_SEL_I; // WISHBONE byte select input input WB_WE_I; // WISHBONE write enable input input BDCs; // Buffer descriptors are selected output WB_ACK_O; // WISHBONE acknowledge output // WISHBONE master output [31:0] m_wb_adr_o; // output [3:0] m_wb_sel_o; // output m_wb_we_o; // output [31:0] m_wb_dat_o; // output m_wb_cyc_o; // output m_wb_stb_o; // input [31:0] m_wb_dat_i; // input m_wb_ack_i; // input m_wb_err_i; // input Reset; // Reset signal // DMA // input [1:0] WB_ACK_I; // DMA acknowledge input // output [1:0] WB_REQ_O; // DMA request output // output [1:0] WB_ND_O; // DMA force new descriptor output // output WB_RD_O; // DMA restart descriptor output // Tx input MTxClk; // Transmit clock (from PHY) input TxUsedData; // Transmit packet used data input [15:0] StatusIzTxEthMACModula; input TxRetry; // Transmit packet retry input TxAbort; // Transmit packet abort input TxDone; // Transmission ended output TxStartFrm; // Transmit packet start frame output TxEndFrm; // Transmit packet end frame output [7:0] TxData; // Transmit packet data byte output TxUnderRun; // Transmit packet under-run output PerPacketCrcEn; // Per packet crc enable output PerPacketPad; // Per packet pading output TPauseRq; // Tx PAUSE control frame output [15:0] TxPauseTV; // PAUSE timer value input WillSendControlFrame; input TxCtrlEndFrm; // Rx input MRxClk; // Receive clock (from PHY) input [7:0] RxData; // Received data byte (from PHY) input RxValid; // input RxStartFrm; // input RxEndFrm; // input RxAbort; // This signal is set when address doesn't match. //Register input r_TxEn; // Transmit enable input r_RxEn; // Receive enable input [7:0] r_TxBDNum; // Receive buffer descriptor number input r_DmaEn; // DMA enable input TX_BD_NUM_Wr; // RxBDNumber written // Interrupts output TxB_IRQ; output TxE_IRQ; output RxB_IRQ; output RxF_IRQ; output Busy_IRQ; reg TxStartFrm; reg TxEndFrm; reg [7:0] TxData; reg TxUnderRun; reg TxBDRead; wire TxStatusWrite; reg [1:0] TxValidBytesLatched; reg [15:0] TxLength; reg [15:0] TxStatus; reg [15:0] RxStatus; reg TxStartFrm_wb; reg TxRetry_wb; reg TxAbort_wb; reg TxDone_wb; reg TxDone_wb_q; reg TxAbort_wb_q; reg TxRetry_wb_q; reg RxBDReady; reg TxBDReady; reg RxBDRead; wire RxStatusWrite; reg [31:0] TxDataLatched; reg [1:0] TxByteCnt; reg LastWord; reg ReadTxDataFromFifo_tck; reg BlockingTxStatusWrite; reg BlockingTxBDRead; reg Flop; reg [7:0] TxBDAddress; reg [7:0] RxBDAddress; reg TxRetrySync1; reg TxAbortSync1; reg TxDoneSync1; reg TxAbort_q; reg TxRetry_q; reg TxUsedData_q; reg [31:0] RxDataLatched2; reg [23:0] RxDataLatched1; reg [1:0] RxValidBytes; reg [1:0] RxByteCnt; reg LastByteIn; reg ShiftWillEnd; reg WriteRxDataToFifo; reg ShiftEnded; reg BDWrite; // BD Write Enable for access from WISHBONE side reg BDRead; // BD Read access from WISHBONE side wire [31:0] RxBDDataIn; // Rx BD data in wire [31:0] TxBDDataIn; // Tx BD data in reg TxEndFrm_wb; wire TxRetryPulse; wire TxDonePulse; wire TxAbortPulse; wire StartRxBDRead; wire StartRxStatusWrite; wire StartTxBDRead; wire TxIRQEn; wire WrapTxStatusBit; wire WrapRxStatusBit; wire [1:0] TxValidBytes; wire [7:0] TempTxBDAddress; wire [7:0] TempRxBDAddress; reg [15:0] RxLength; wire [15:0] NewRxStatus; wire SetGotData; wire GotDataEvaluate; reg temp_ack; `ifdef ETH_REGISTERED_OUTPUTS reg temp_ack2; reg [31:0] registered_ram_do; `endif reg WbEn, WbEn_q; reg RxEn, RxEn_q; reg TxEn, TxEn_q; wire ram_ce; wire ram_we; wire ram_oe; reg [7:0] ram_addr; reg [31:0] ram_di; wire [31:0] ram_do; wire StartTxPointerRead; wire ResetTxPointerRead; reg TxPointerRead; reg TxEn_needed; reg RxEn_needed; wire StartRxPointerRead; reg RxPointerRead; always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) begin temp_ack <=#Tp 1'b0; `ifdef ETH_REGISTERED_OUTPUTS temp_ack2 <=#Tp 1'b0; registered_ram_do <=#Tp 32'h0; `endif end else begin temp_ack <=#Tp BDWrite & WbEn & WbEn_q | BDRead & WbEn & ~WbEn_q; `ifdef ETH_REGISTERED_OUTPUTS temp_ack2 <=#Tp temp_ack; registered_ram_do <=#Tp ram_do; `endif end end `ifdef ETH_REGISTERED_OUTPUTS assign WB_ACK_O = temp_ack2; assign WB_DAT_O = registered_ram_do; `else assign WB_ACK_O = temp_ack; assign WB_DAT_O = ram_do; `endif // Generic synchronous single-port RAM interface generic_spram #(8, 32) ram ( // Generic synchronous single-port RAM interface .clk(WB_CLK_I), .rst(Reset), .ce(ram_ce), .we(ram_we), .oe(ram_oe), .addr(ram_addr), .di(ram_di), .do(ram_do) ); assign ram_ce = 1'b1; assign ram_we = BDWrite & WbEn & WbEn_q | TxStatusWrite | RxStatusWrite; assign ram_oe = BDRead & WbEn & WbEn_q | TxEn & TxEn_q & (TxBDRead | TxPointerRead) | RxEn & RxEn_q & (RxBDRead | RxPointerRead); // Tu manjka se read kadar se bere RxBD always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxEn_needed <=#Tp 1'b0; else if(~TxBDReady & r_TxEn & WbEn & ~WbEn_q) TxEn_needed <=#Tp 1'b1; else if(TxPointerRead & TxEn & TxEn_q) TxEn_needed <=#Tp 1'b0; end reg [3:0] debug; // Enabling access to the RAM for three devices. always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) begin WbEn <=#Tp 1'b1; RxEn <=#Tp 1'b0; TxEn <=#Tp 1'b0; ram_addr <=#Tp 8'h0; ram_di <=#Tp 32'h0; debug <=#Tp 4'h0; end else begin // Switching between three stages depends on enable signals casex ({WbEn_q, RxEn_q, TxEn_q, RxEn_needed, TxEn_needed}) // synopsys parallel_case 5'b100_1x : begin WbEn <=#Tp 1'b0; RxEn <=#Tp 1'b1; // wb access stage and r_RxEn is enabled TxEn <=#Tp 1'b0; ram_addr <=#Tp RxBDAddress + RxPointerRead; ram_di <=#Tp RxBDDataIn; debug <=#Tp 4'h1; end 5'b100_01 : begin WbEn <=#Tp 1'b0; RxEn <=#Tp 1'b0; TxEn <=#Tp 1'b1; // wb access stage, r_RxEn is disabled but r_TxEn is enabled ram_addr <=#Tp TxBDAddress + TxPointerRead; ram_di <=#Tp TxBDDataIn; debug <=#Tp 4'h2; end 5'b010_x0 : begin WbEn <=#Tp 1'b1; // RxEn access stage and r_TxEn is disabled RxEn <=#Tp 1'b0; TxEn <=#Tp 1'b0; ram_addr <=#Tp WB_ADR_I[9:2]; ram_di <=#Tp WB_DAT_I; BDWrite <=#Tp BDCs & WB_WE_I; BDRead <=#Tp BDCs & ~WB_WE_I; debug <=#Tp 4'h3; end 5'b010_x1 : begin WbEn <=#Tp 1'b0; RxEn <=#Tp 1'b0; TxEn <=#Tp 1'b1; // RxEn access stage and r_TxEn is enabled ram_addr <=#Tp TxBDAddress + TxPointerRead; ram_di <=#Tp TxBDDataIn; debug <=#Tp 4'h4; end 5'b001_xx : begin WbEn <=#Tp 1'b1; // TxEn access stage (we always go to wb access stage) RxEn <=#Tp 1'b0; TxEn <=#Tp 1'b0; ram_addr <=#Tp WB_ADR_I[9:2]; ram_di <=#Tp WB_DAT_I; BDWrite <=#Tp BDCs & WB_WE_I; BDRead <=#Tp BDCs & ~WB_WE_I; debug <=#Tp 4'h5; end 5'b100_00 : begin WbEn <=#Tp 1'b0; // WbEn access stage and there is no need for other stages. WbEn needs to be switched off for a bit debug <=#Tp 4'h6; end 5'b000_00 : begin WbEn <=#Tp 1'b1; // Idle state. We go to WbEn access stage. RxEn <=#Tp 1'b0; TxEn <=#Tp 1'b0; ram_addr <=#Tp WB_ADR_I[9:2]; ram_di <=#Tp WB_DAT_I; BDWrite <=#Tp BDCs & WB_WE_I; BDRead <=#Tp BDCs & ~WB_WE_I; debug <=#Tp 4'h7; end default : begin WbEn <=#Tp 1'b1; // We go to wb access stage RxEn <=#Tp 1'b0; TxEn <=#Tp 1'b0; ram_addr <=#Tp WB_ADR_I[9:2]; ram_di <=#Tp WB_DAT_I; BDWrite <=#Tp BDCs & WB_WE_I; BDRead <=#Tp BDCs & ~WB_WE_I; debug <=#Tp 4'h8; end endcase end end // Delayed stage signals always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) begin WbEn_q <=#Tp 1'b0; RxEn_q <=#Tp 1'b0; TxEn_q <=#Tp 1'b0; end else begin WbEn_q <=#Tp WbEn; RxEn_q <=#Tp RxEn; TxEn_q <=#Tp TxEn; end end // Changes for tx occur every second clock. Flop is used for this manner. always @ (posedge MTxClk or posedge Reset) begin if(Reset) Flop <=#Tp 1'b0; else if(TxDone | TxAbort | TxRetry_q) Flop <=#Tp 1'b0; else if(TxUsedData) Flop <=#Tp ~Flop; end wire ResetTxBDReady; assign ResetTxBDReady = TxDonePulse | TxAbortPulse | TxRetryPulse; // Latching READY status of the Tx buffer descriptor always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxBDReady <=#Tp 1'b0; else if(TxEn & TxEn_q & TxBDRead) TxBDReady <=#Tp ram_do[15] & (ram_do[31:16] > 4); // TxBDReady is sampled only once at the beginning. else // Only packets larger then 4 bytes are transmitted. if(ResetTxBDReady) TxBDReady <=#Tp 1'b0; end // Reading the Tx buffer descriptor assign StartTxBDRead = (TxRetry_wb | TxStatusWrite) & ~BlockingTxBDRead; always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxBDRead <=#Tp 1'b1; else if(StartTxBDRead) TxBDRead <=#Tp 1'b1; else if(TxBDReady) TxBDRead <=#Tp 1'b0; end // Reading Tx BD pointer assign StartTxPointerRead = TxBDRead & TxBDReady; // Reading Tx BD Pointer always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxPointerRead <=#Tp 1'b0; else if(StartTxPointerRead) TxPointerRead <=#Tp 1'b1; else if(TxEn_q) TxPointerRead <=#Tp 1'b0; end // Writing status back to the Tx buffer descriptor assign TxStatusWrite = (TxDone_wb | TxAbort_wb) & TxEn & TxEn_q & ~BlockingTxStatusWrite; // Status writing must occur only once. Meanwhile it is blocked. always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) BlockingTxStatusWrite <=#Tp 1'b0; else if(TxStatusWrite) BlockingTxStatusWrite <=#Tp 1'b1; else if(~TxDone_wb & ~TxAbort_wb) BlockingTxStatusWrite <=#Tp 1'b0; end // TxBDRead state is activated only once. always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) BlockingTxBDRead <=#Tp 1'b0; else if(StartTxBDRead) BlockingTxBDRead <=#Tp 1'b1; else if(TxStartFrm_wb) BlockingTxBDRead <=#Tp 1'b0; end // Latching status from the tx buffer descriptor // Data is avaliable one cycle after the access is started (at that time signal TxEn is not active) always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxStatus <=#Tp 15'h0; else if(TxEn & TxEn_q & TxBDRead) TxStatus <=#Tp ram_do[15:0]; end reg ReadTxDataFromMemory; wire WriteRxDataToMemory; reg MasterWbTX; reg MasterWbRX; reg [31:0] m_wb_adr_o; reg m_wb_cyc_o; reg m_wb_stb_o; reg m_wb_we_o; wire TxLengthEq0; wire TxLengthLt4; //Latching length from the buffer descriptor; always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxLength <=#Tp 16'h0; else if(TxEn & TxEn_q & TxBDRead) TxLength <=#Tp ram_do[31:16]; else if(MasterWbTX & m_wb_ack_i) begin if(TxLengthLt4) TxLength <=#Tp 16'h0; else TxLength <=#Tp TxLength - 3'h4; // Length is subtracted at the data request end end assign TxLengthEq0 = TxLength == 0; assign TxLengthLt4 = TxLength < 4; reg BlockingIncrementTxPointer; reg [31:0] TxPointer; reg [31:0] RxPointer; //Latching Tx buffer pointer from buffer descriptor; always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxPointer <=#Tp 0; else if(TxEn & TxEn_q & TxPointerRead) TxPointer <=#Tp ram_do; else if(MasterWbTX & ~BlockingIncrementTxPointer) TxPointer <=#Tp TxPointer + 4; // Pointer increment end wire MasterAccessFinished; //Latching Tx buffer pointer from buffer descriptor; always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) BlockingIncrementTxPointer <=#Tp 0; else if(MasterAccessFinished) BlockingIncrementTxPointer <=#Tp 0; else if(MasterWbTX) BlockingIncrementTxPointer <=#Tp 1'b1; end wire TxBufferAlmostFull; wire TxBufferFull; wire TxBufferEmpty; wire TxBufferAlmostEmpty; wire ResetReadTxDataFromMemory; wire SetReadTxDataFromMemory; reg BlockReadTxDataFromMemory; assign ResetReadTxDataFromMemory = (TxLengthEq0) | TxAbortPulse | TxRetryPulse; assign SetReadTxDataFromMemory = TxEn & TxEn_q & TxPointerRead; always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) ReadTxDataFromMemory <=#Tp 1'b0; else if(ResetReadTxDataFromMemory) ReadTxDataFromMemory <=#Tp 1'b0; else if(SetReadTxDataFromMemory) ReadTxDataFromMemory <=#Tp 1'b1; end wire ReadTxDataFromMemory_2 = ReadTxDataFromMemory & ~BlockReadTxDataFromMemory; wire [31:0] TxData_wb; wire ReadTxDataFromFifo_wb; always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) BlockReadTxDataFromMemory <=#Tp 1'b0; else if(ReadTxDataFromFifo_wb) BlockReadTxDataFromMemory <=#Tp 1'b0; else if((TxBufferAlmostFull | TxLength <= 4)& MasterWbTX) BlockReadTxDataFromMemory <=#Tp 1'b1; end assign MasterAccessFinished = m_wb_ack_i | m_wb_err_i; assign m_wb_sel_o = 4'hf; // Enabling master wishbone access to the memory for two devices TX and RX. always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) begin MasterWbTX <=#Tp 1'b0; MasterWbRX <=#Tp 1'b0; m_wb_adr_o <=#Tp 32'h0; m_wb_cyc_o <=#Tp 1'b0; m_wb_stb_o <=#Tp 1'b0; m_wb_we_o <=#Tp 1'b0; end else begin // Switching between two stages depends on enable signals casex ({MasterWbTX, MasterWbRX, ReadTxDataFromMemory_2, WriteRxDataToMemory, MasterAccessFinished}) // synopsys parallel_case full_case 5'b00_x1_x : begin MasterWbTX <=#Tp 1'b0; // idle and master write is needed (data write to rx buffer) MasterWbRX <=#Tp 1'b1; m_wb_adr_o <=#Tp RxPointer; m_wb_cyc_o <=#Tp 1'b1; m_wb_stb_o <=#Tp 1'b1; m_wb_we_o <=#Tp 1'b1; end 5'b00_10_x : begin MasterWbTX <=#Tp 1'b1; // idle and master read is needed (data read from tx buffer) MasterWbRX <=#Tp 1'b0; m_wb_adr_o <=#Tp TxPointer; m_wb_cyc_o <=#Tp 1'b1; m_wb_stb_o <=#Tp 1'b1; m_wb_we_o <=#Tp 1'b0; end 5'b10_10_1 : begin MasterWbTX <=#Tp 1'b1; // master read and master read is needed (data read from tx buffer) MasterWbRX <=#Tp 1'b0; m_wb_adr_o <=#Tp TxPointer; m_wb_cyc_o <=#Tp 1'b1; m_wb_stb_o <=#Tp 1'b1; m_wb_we_o <=#Tp 1'b0; end 5'b01_01_1 : begin MasterWbTX <=#Tp 1'b0; // master write and master write is needed (data write to rx buffer) MasterWbRX <=#Tp 1'b1; m_wb_adr_o <=#Tp RxPointer; m_wb_we_o <=#Tp 1'b1; end 5'b10_x1_1 : begin MasterWbTX <=#Tp 1'b0; // master read and master write is needed (data write to rx buffer) MasterWbRX <=#Tp 1'b1; m_wb_adr_o <=#Tp RxPointer; m_wb_we_o <=#Tp 1'b1; end 5'b01_1x_1 : begin MasterWbTX <=#Tp 1'b1; // master write and master read is needed (data read from tx buffer) MasterWbRX <=#Tp 1'b0; m_wb_adr_o <=#Tp TxPointer; m_wb_we_o <=#Tp 1'b0; end 5'bxx_00_1 : begin MasterWbTX <=#Tp 1'b0; // whatever and no master read or write is needed (ack or err comes finishing previous access) MasterWbRX <=#Tp 1'b0; m_wb_cyc_o <=#Tp 1'b0; m_wb_stb_o <=#Tp 1'b0; end endcase end end wire TxFifoClear; assign TxFifoClear = (TxAbort_wb | TxRetry_wb) & ~TxBDReady; eth_fifo #(`TX_FIFO_DATA_WIDTH, `TX_FIFO_DEPTH, `TX_FIFO_CNT_WIDTH) tx_fifo (.data_in(m_wb_dat_i), .data_out(TxData_wb), .clk(WB_CLK_I), .reset(Reset), .write(MasterWbTX & m_wb_ack_i), .read(ReadTxDataFromFifo_wb), .clear(TxFifoClear), .full(TxBufferFull), .almost_full(TxBufferAlmostFull), .almost_empty(TxBufferAlmostEmpty), .empty(TxBufferEmpty)); reg StartOccured; reg TxStartFrm_sync1; reg TxStartFrm_sync2; reg TxStartFrm_syncb1; reg TxStartFrm_syncb2; // Start: Generation of the TxStartFrm_wb which is then synchronized to the MTxClk always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxStartFrm_wb <=#Tp 1'b0; else if(TxBDReady & ~StartOccured & (TxBufferFull | TxLengthEq0)) TxStartFrm_wb <=#Tp 1'b1; else if(TxStartFrm_syncb2) TxStartFrm_wb <=#Tp 1'b0; end // StartOccured: TxStartFrm_wb occurs only ones at the beginning. Then it's blocked. always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) StartOccured <=#Tp 1'b0; else if(TxStartFrm_wb) StartOccured <=#Tp 1'b1; else if(ResetTxBDReady) StartOccured <=#Tp 1'b0; end // Synchronizing TxStartFrm_wb to MTxClk always @ (posedge MTxClk or posedge Reset) begin if(Reset) TxStartFrm_sync1 <=#Tp 1'b0; else TxStartFrm_sync1 <=#Tp TxStartFrm_wb; end always @ (posedge MTxClk or posedge Reset) begin if(Reset) TxStartFrm_sync2 <=#Tp 1'b0; else TxStartFrm_sync2 <=#Tp TxStartFrm_sync1; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxStartFrm_syncb1 <=#Tp 1'b0; else TxStartFrm_syncb1 <=#Tp TxStartFrm_sync2; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxStartFrm_syncb2 <=#Tp 1'b0; else TxStartFrm_syncb2 <=#Tp TxStartFrm_syncb1; end always @ (posedge MTxClk or posedge Reset) begin if(Reset) TxStartFrm <=#Tp 1'b0; else if(TxStartFrm_sync2) TxStartFrm <=#Tp 1'b1; // igor !!! Dodaj se pogoj, da ni vmes prisel kaksen abort ali kaj podobnega else if(TxUsedData_q) TxStartFrm <=#Tp 1'b0; end // End: Generation of the TxStartFrm_wb which is then synchronized to the MTxClk // TxEndFrm_wb: indicator of the end of frame always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxEndFrm_wb <=#Tp 1'b0; else if(TxLengthLt4 & TxBufferAlmostEmpty & TxUsedData) TxEndFrm_wb <=#Tp 1'b1; else if(TxRetryPulse | TxDonePulse | TxAbortPulse) TxEndFrm_wb <=#Tp 1'b0; end // Marks which bytes are valid within the word. assign TxValidBytes = TxLengthLt4 ? TxLength[1:0] : 2'b0; reg LatchValidBytes; reg LatchValidBytes_q; always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) LatchValidBytes <=#Tp 1'b0; else if(TxLengthLt4 & TxBDReady) LatchValidBytes <=#Tp 1'b1; else LatchValidBytes <=#Tp 1'b0; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) LatchValidBytes_q <=#Tp 1'b0; else LatchValidBytes_q <=#Tp LatchValidBytes; end // Latching valid bytes always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxValidBytesLatched <=#Tp 2'h0; else if(LatchValidBytes & ~LatchValidBytes_q) TxValidBytesLatched <=#Tp TxValidBytes; else if(TxRetryPulse | TxDonePulse | TxAbortPulse) TxValidBytesLatched <=#Tp 2'h0; end // Bit 14 is used as a wrap bit. When active it indicates the last buffer descriptor in a row. After // using this descriptor, first BD will be used again. // TX // bit 15 od tx je ready // bit 14 od tx je interrupt (Tx buffer ali tx error bit se postavi v interrupt registru, ko se ta buffer odda) // bit 13 od tx je wrap // bit 12 od tx je pad // bit 11 od tx je crc // bit 10 od tx je last (crc se doda le ce je bit 11 in hkrati bit 10) // bit 9 od tx je pause request (control frame) // Vsi zgornji biti gredo ven, spodnji biti (od 8 do 0) pa so statusni in se vpisejo po koncu oddajanja // bit 8 od tx je defer indication // bit 7 od tx je late collision // bit 6 od tx je retransmittion limit // bit 5 od tx je underrun // bit 4 od tx je carrier sense lost // bit [3:0] od tx je retry count //assign TxBDReady = TxStatus[15]; // already used assign TxIRQEn = TxStatus[14]; assign WrapTxStatusBit = TxStatus[13]; // ok povezan assign PerPacketPad = TxStatus[12]; // ok povezan assign PerPacketCrcEn = TxStatus[11] & TxStatus[10]; // When last is also set // ok povezan //assign TxPauseRq = TxStatus[9]; // already used Ta gre ven, ker bo stvar izvedena preko registrov // RX // bit 15 od rx je empty // bit 14 od rx je interrupt (Rx buffer ali rx frame received se postavi v interrupt registru, ko se ta buffer zapre) // bit 13 od rx je wrap // bit 12 od rx je reserved // bit 11 od rx je reserved // bit 10 od rx je last (crc se doda le ce je bit 11 in hkrati bit 10) // bit 9 od rx je pause request (control frame) // Vsi zgornji biti gredo ven, spodnji biti (od 8 do 0) pa so statusni in se vpisejo po koncu oddajanja // bit 8 od rx je defer indication // bit 7 od rx je late collision // bit 6 od rx je retransmittion limit // bit 5 od rx je underrun // bit 4 od rx je carrier sense lost // bit [3:0] od rx je retry count assign WrapRxStatusBit = RxStatus[13]; // Temporary Tx and Rx buffer descriptor address assign TempTxBDAddress[7:0] = {8{ TxStatusWrite & ~WrapTxStatusBit}} & (TxBDAddress + 2'h2) ; // Tx BD increment or wrap (last BD) assign TempRxBDAddress[7:0] = {8{ WrapRxStatusBit}} & (r_TxBDNum) | // Using first Rx BD {8{~WrapRxStatusBit}} & (RxBDAddress + 2'h2) ; // Using next Rx BD (incremenrement address) // Latching Tx buffer descriptor address always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxBDAddress <=#Tp 8'h0; else if(TxStatusWrite) TxBDAddress <=#Tp TempTxBDAddress; end // Latching Rx buffer descriptor address always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) RxBDAddress <=#Tp 8'h0; else if(TX_BD_NUM_Wr) // When r_TxBDNum is updated, RxBDAddress is also igor !!! ta del bi se lahko popravil RxBDAddress <=#Tp WB_DAT_I[7:0]; else if(RxStatusWrite) RxBDAddress <=#Tp TempRxBDAddress; end assign NewRxStatus[15:0] = 16'hdead; assign RxBDDataIn = {RxLength, NewRxStatus}; // tu dopolni, da se bo vpisoval status assign TxBDDataIn = {32'h004380ef}; // tu dopolni, da se bo vpisoval status // Signals used for various purposes assign TxRetryPulse = TxRetry_wb & ~TxRetry_wb_q; assign TxDonePulse = TxDone_wb & ~TxDone_wb_q; assign TxAbortPulse = TxAbort_wb & ~TxAbort_wb_q; // assign ClearTxBDReady = ~TxUsedData & TxUsedData_q; assign TPauseRq = 0; // igor !!! v koncni fazi mora tu biti pause request assign TxPauseTV[15:0] = TxLength[15:0]; // igor !!! v koncni fazi mora tu biti pause request // Generating delayed signals always @ (posedge MTxClk or posedge Reset) begin if(Reset) begin TxAbort_q <=#Tp 1'b0; TxRetry_q <=#Tp 1'b0; TxUsedData_q <=#Tp 1'b0; end else begin TxAbort_q <=#Tp TxAbort; TxRetry_q <=#Tp TxRetry; TxUsedData_q <=#Tp TxUsedData; end end // Generating delayed signals always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) begin TxDone_wb_q <=#Tp 1'b0; TxAbort_wb_q <=#Tp 1'b0; TxRetry_wb_q <=#Tp 1'b0; end else begin TxDone_wb_q <=#Tp TxDone_wb; TxAbort_wb_q <=#Tp TxAbort_wb; TxRetry_wb_q <=#Tp TxRetry_wb; end end // Sinchronizing and evaluating tx data //assign SetGotData = (TxStartFrm_wb | NewTxDataAvaliable_wb & ~TxAbort_wb & ~TxRetry_wb) & ~WB_CLK_I; assign SetGotData = (TxStartFrm_wb); // igor namesto zgornje // Evaluating data. If abort or retry occured meanwhile than data is ignored. //assign GotDataEvaluate = GotDataSync3 & ~GotData & (~TxRetry & ~TxAbort | (TxRetry | TxAbort) & (TxStartFrm)); assign GotDataEvaluate = (~TxRetry & ~TxAbort | (TxRetry | TxAbort) & (TxStartFrm)); // Indication of the last word always @ (posedge MTxClk or posedge Reset) begin if(Reset) LastWord <=#Tp 1'b0; else if((TxEndFrm | TxAbort | TxRetry) & Flop) LastWord <=#Tp 1'b0; else if(TxUsedData & Flop & TxByteCnt == 2'h3) LastWord <=#Tp TxEndFrm_wb; end // Tx end frame generation always @ (posedge MTxClk or posedge Reset) begin if(Reset) TxEndFrm <=#Tp 1'b0; else if(Flop & TxEndFrm | TxAbort | TxRetry_q) // igor !!! zakaj je tu TxRetry_q ? TxEndFrm <=#Tp 1'b0; else if(Flop & LastWord) begin case (TxValidBytesLatched) 1 : TxEndFrm <=#Tp TxByteCnt == 2'h0; 2 : TxEndFrm <=#Tp TxByteCnt == 2'h1; 3 : TxEndFrm <=#Tp TxByteCnt == 2'h2; 0 : TxEndFrm <=#Tp TxByteCnt == 2'h3; default : TxEndFrm <=#Tp 1'b0; endcase end end // Tx data selection (latching) always @ (posedge MTxClk or posedge Reset) begin if(Reset) TxData <=#Tp 8'h0; else if(TxStartFrm_sync2 & ~TxStartFrm) TxData <=#Tp TxData_wb[7:0]; else if(TxUsedData & Flop) begin case(TxByteCnt) 0 : TxData <=#Tp TxDataLatched[7:0]; 1 : TxData <=#Tp TxDataLatched[15:8]; 2 : TxData <=#Tp TxDataLatched[23:16]; 3 : TxData <=#Tp TxDataLatched[31:24]; endcase end end // Latching tx data always @ (posedge MTxClk or posedge Reset) begin if(Reset) TxDataLatched[31:0] <=#Tp 32'h0; else if(TxStartFrm_sync2 & ~TxStartFrm | TxUsedData & Flop & TxByteCnt == 2'h3) TxDataLatched[31:0] <=#Tp TxData_wb[31:0]; end // Tx under run always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxUnderRun <=#Tp 1'b0; else if(TxAbortPulse) TxUnderRun <=#Tp 1'b0; else if(TxBufferEmpty & ReadTxDataFromFifo_wb) TxUnderRun <=#Tp 1'b1; end // Tx Byte counter always @ (posedge MTxClk or posedge Reset) begin if(Reset) TxByteCnt <=#Tp 2'h0; else if(TxAbort_q | TxRetry_q) TxByteCnt <=#Tp 2'h0; else if(TxStartFrm & ~TxUsedData) TxByteCnt <=#Tp 2'h1; else if(TxUsedData & Flop) TxByteCnt <=#Tp TxByteCnt + 1; end // Start: Generation of the ReadTxDataFromFifo_tck signal and synchronization to the WB_CLK_I reg ReadTxDataFromFifo_sync1; reg ReadTxDataFromFifo_sync2; reg ReadTxDataFromFifo_sync3; reg ReadTxDataFromFifo_syncb1; reg ReadTxDataFromFifo_syncb2; always @ (posedge MTxClk or posedge Reset) begin if(Reset) ReadTxDataFromFifo_tck <=#Tp 1'b0; else if(ReadTxDataFromFifo_syncb2) ReadTxDataFromFifo_tck <=#Tp 1'b0; else if(TxStartFrm_sync2 & ~TxStartFrm | TxUsedData & Flop & TxByteCnt == 2'h3 & ~LastWord) ReadTxDataFromFifo_tck <=#Tp 1'b1; end // Synchronizing TxStartFrm_wb to MTxClk always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) ReadTxDataFromFifo_sync1 <=#Tp 1'b0; else ReadTxDataFromFifo_sync1 <=#Tp ReadTxDataFromFifo_tck; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) ReadTxDataFromFifo_sync2 <=#Tp 1'b0; else ReadTxDataFromFifo_sync2 <=#Tp ReadTxDataFromFifo_sync1; end always @ (posedge MTxClk or posedge Reset) begin if(Reset) ReadTxDataFromFifo_syncb1 <=#Tp 1'b0; else ReadTxDataFromFifo_syncb1 <=#Tp ReadTxDataFromFifo_sync2; end always @ (posedge MTxClk or posedge Reset) begin if(Reset) ReadTxDataFromFifo_syncb2 <=#Tp 1'b0; else ReadTxDataFromFifo_syncb2 <=#Tp ReadTxDataFromFifo_syncb1; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) ReadTxDataFromFifo_sync3 <=#Tp 1'b0; else ReadTxDataFromFifo_sync3 <=#Tp ReadTxDataFromFifo_sync2; end assign ReadTxDataFromFifo_wb = ReadTxDataFromFifo_sync2 & ~ReadTxDataFromFifo_sync3; // End: Generation of the ReadTxDataFromFifo_tck signal and synchronization to the WB_CLK_I // Synchronizing TxRetry signal (synchronized to WISHBONE clock) always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxRetrySync1 <=#Tp 1'b0; else TxRetrySync1 <=#Tp TxRetry; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxRetry_wb <=#Tp 1'b0; else TxRetry_wb <=#Tp TxRetrySync1; end // Synchronized TxDone_wb signal (synchronized to WISHBONE clock) always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxDoneSync1 <=#Tp 1'b0; else TxDoneSync1 <=#Tp TxDone; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxDone_wb <=#Tp 1'b0; else TxDone_wb <=#Tp TxDoneSync1; end // Synchronizing TxAbort signal (synchronized to WISHBONE clock) always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxAbortSync1 <=#Tp 1'b0; else TxAbortSync1 <=#Tp TxAbort; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) TxAbort_wb <=#Tp 1'b0; else TxAbort_wb <=#Tp TxAbortSync1; end assign StartRxBDRead = RxStatusWrite | RxAbort; // Reading the Rx buffer descriptor always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) RxBDRead <=#Tp 1'b1; else if(StartRxBDRead) RxBDRead <=#Tp 1'b1; else if(RxBDReady) RxBDRead <=#Tp 1'b0; end // Reading of the next receive buffer descriptor starts after reception status is // written to the previous one. // Latching READY status of the Rx buffer descriptor always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) RxBDReady <=#Tp 1'b0; else if(RxEn & RxEn_q & RxBDRead) RxBDReady <=#Tp ram_do[15]; // RxBDReady is sampled only once at the beginning else if(ShiftEnded | RxAbort) // igor !!! tx del ima tu ResetTxBDReady RxBDReady <=#Tp 1'b0; end // Latching Rx buffer descriptor status // Data is avaliable one cycle after the access is started (at that time signal RxEn is not active) always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) RxStatus <=#Tp 16'h0; else if(RxEn & RxEn_q & RxBDRead) RxStatus <=#Tp ram_do[15:0]; end // Reading Rx BD pointer assign StartRxPointerRead = RxBDRead & RxBDReady; // Reading Tx BD Pointer always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) RxPointerRead <=#Tp 1'b0; else if(StartRxPointerRead) RxPointerRead <=#Tp 1'b1; else if(RxEn_q) RxPointerRead <=#Tp 1'b0; end reg BlockingIncrementRxPointer; //Latching Rx buffer pointer from buffer descriptor; always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) RxPointer <=#Tp 32'h0; else if(RxEn & RxEn_q & RxPointerRead) RxPointer <=#Tp ram_do; else if(MasterWbRX & ~BlockingIncrementRxPointer) RxPointer <=#Tp RxPointer + 4; // Pointer increment end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) BlockingIncrementRxPointer <=#Tp 0; else if(MasterAccessFinished) BlockingIncrementRxPointer <=#Tp 0; else if(MasterWbRX) BlockingIncrementRxPointer <=#Tp 1'b1; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) RxEn_needed <=#Tp 1'b0; else if(~RxBDReady & r_RxEn & WbEn & ~WbEn_q) RxEn_needed <=#Tp 1'b1; else if(RxPointerRead & RxEn & RxEn_q) RxEn_needed <=#Tp 1'b0; end // Reception status is written back to the buffer descriptor after the end of frame is detected. assign RxStatusWrite = ShiftEnded & RxEn & RxEn_q; reg RxEnableWindow; // Indicating that last byte is being reveived always @ (posedge MRxClk or posedge Reset) begin if(Reset) LastByteIn <=#Tp 1'b0; else if(ShiftWillEnd & (&RxByteCnt) | RxAbort) LastByteIn <=#Tp 1'b0; else if(RxValid & RxBDReady & RxEndFrm & ~(&RxByteCnt) & RxEnableWindow) LastByteIn <=#Tp 1'b1; end reg ShiftEnded_tck; reg ShiftEndedSync1; reg ShiftEndedSync2; wire StartShiftWillEnd; assign StartShiftWillEnd = LastByteIn & (&RxByteCnt) | RxValid & RxEndFrm & (&RxByteCnt) & RxEnableWindow; // Indicating that data reception will end always @ (posedge MRxClk or posedge Reset) begin if(Reset) ShiftWillEnd <=#Tp 1'b0; else if(ShiftEnded_tck | RxAbort) ShiftWillEnd <=#Tp 1'b0; else if(StartShiftWillEnd) ShiftWillEnd <=#Tp 1'b1; end // Receive byte counter always @ (posedge MRxClk or posedge Reset) begin if(Reset) RxByteCnt <=#Tp 2'h0; else if(ShiftEnded_tck | RxAbort) RxByteCnt <=#Tp 2'h0; else if(RxValid & (RxStartFrm | RxEnableWindow) & RxBDReady | LastByteIn) RxByteCnt <=#Tp RxByteCnt + 1'b1; end // Indicates how many bytes are valid within the last word always @ (posedge MRxClk or posedge Reset) begin if(Reset) RxValidBytes <=#Tp 2'h1; else if(ShiftEnded_tck | RxAbort) RxValidBytes <=#Tp 2'h1; else if(RxValid & ~LastByteIn & ~RxStartFrm & RxEnableWindow) RxValidBytes <=#Tp RxValidBytes + 1; end always @ (posedge MRxClk or posedge Reset) begin if(Reset) RxDataLatched1 <=#Tp 24'h0; else if(RxValid & RxBDReady & ~LastByteIn & (RxStartFrm | RxEnableWindow)) begin case(RxByteCnt) // synopsys parallel_case 2'h0: RxDataLatched1[7:0] <=#Tp RxData; 2'h1: RxDataLatched1[15:8] <=#Tp RxData; 2'h2: RxDataLatched1[23:16] <=#Tp RxData; 2'h3: RxDataLatched1 <=#Tp RxDataLatched1; endcase end end wire SetWriteRxDataToFifo; // Assembling data that will be written to the rx_fifo always @ (posedge MRxClk or posedge Reset) begin if(Reset) RxDataLatched2 <=#Tp 32'h0; else if(SetWriteRxDataToFifo & ~ShiftWillEnd) RxDataLatched2 <=#Tp {RxData, RxDataLatched1[23:0]}; else if(SetWriteRxDataToFifo & ShiftWillEnd) case(RxValidBytes) 0 : RxDataLatched2 <=#Tp {RxData, RxDataLatched1[23:0]}; 1 : RxDataLatched2 <=#Tp { 24'h0, RxDataLatched1[7:0]}; 2 : RxDataLatched2 <=#Tp { 16'h0, RxDataLatched1[15:0]}; 3 : RxDataLatched2 <=#Tp { 8'h0, RxDataLatched1[23:0]}; endcase end // Assembling data that will be written to the rx_fifo always @ (posedge MRxClk or posedge Reset) begin if(Reset) RxLength <=#Tp 16'h0; else if(RxStartFrm) RxLength <=#Tp 16'h1; else if(RxValid & (RxStartFrm | RxEnableWindow)) RxLength <=#Tp RxLength + 1'b1; end reg WriteRxDataToFifoSync1; reg WriteRxDataToFifoSync2; // Indicating start of the reception process assign SetWriteRxDataToFifo = (RxValid & RxBDReady & ~RxStartFrm & RxEnableWindow & (&RxByteCnt)) | (ShiftWillEnd & LastByteIn & (&RxByteCnt)); always @ (posedge MRxClk or posedge Reset) begin if(Reset) WriteRxDataToFifo <=#Tp 1'b0; else if(SetWriteRxDataToFifo & ~RxAbort) WriteRxDataToFifo <=#Tp 1'b1; else if(WriteRxDataToFifoSync1 | RxAbort) WriteRxDataToFifo <=#Tp 1'b0; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) WriteRxDataToFifoSync1 <=#Tp 1'b0; else if(WriteRxDataToFifo) WriteRxDataToFifoSync1 <=#Tp 1'b1; else WriteRxDataToFifoSync1 <=#Tp 1'b0; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) WriteRxDataToFifoSync2 <=#Tp 1'b0; else WriteRxDataToFifoSync2 <=#Tp WriteRxDataToFifoSync1; end wire WriteRxDataToFifo_wb; assign WriteRxDataToFifo_wb = WriteRxDataToFifoSync1 & ~WriteRxDataToFifoSync2; reg RxAbortSync1; reg RxAbortSync2; reg RxAbortSyncb1; reg RxAbortSyncb2; eth_fifo #(`RX_FIFO_DATA_WIDTH, `RX_FIFO_DEPTH, `RX_FIFO_CNT_WIDTH) rx_fifo (.data_in(RxDataLatched2), .data_out(m_wb_dat_o), .clk(WB_CLK_I), .reset(Reset), .write(WriteRxDataToFifo_wb), .read(MasterWbRX & m_wb_ack_i), .clear(RxAbortSync2), .full(RxBufferFull), .almost_full(RxBufferAlmostFull), .almost_empty(RxBufferAlmostEmpty), .empty(RxBufferEmpty)); assign WriteRxDataToMemory = ~RxBufferEmpty & (~MasterWbRX | ~RxBufferAlmostEmpty); // Generation of the end-of-frame signal always @ (posedge MRxClk or posedge Reset) begin if(Reset) ShiftEnded_tck <=#Tp 1'b0; else if(SetWriteRxDataToFifo & StartShiftWillEnd & ~RxAbort) ShiftEnded_tck <=#Tp 1'b1; else if(ShiftEndedSync2 | RxAbort) ShiftEnded_tck <=#Tp 1'b0; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) ShiftEndedSync1 <=#Tp 1'b0; else ShiftEndedSync1 <=#Tp ShiftEnded_tck; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) ShiftEndedSync2 <=#Tp 1'b0; else if(ShiftEndedSync1) ShiftEndedSync2 <=#Tp 1'b1; else if(ShiftEnded) ShiftEndedSync2 <=#Tp 1'b0; end // Generation of the end-of-frame signal always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) ShiftEnded <=#Tp 1'b0; else if(ShiftEndedSync2 & MasterWbRX & m_wb_ack_i & RxBufferAlmostEmpty) ShiftEnded <=#Tp 1'b1; else if(RxStatusWrite) ShiftEnded <=#Tp 1'b0; end // Generation of the end-of-frame signal always @ (posedge MRxClk or posedge Reset) begin if(Reset) RxEnableWindow <=#Tp 1'b0; else if(RxStartFrm) RxEnableWindow <=#Tp 1'b1; else if(RxEndFrm | RxAbort) RxEnableWindow <=#Tp 1'b0; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) RxAbortSync1 <=#Tp 1'b0; else RxAbortSync1 <=#Tp RxAbort; end always @ (posedge WB_CLK_I or posedge Reset) begin if(Reset) RxAbortSync2 <=#Tp 1'b0; else RxAbortSync2 <=#Tp RxAbortSync1; end always @ (posedge MRxClk or posedge Reset) begin if(Reset) RxAbortSyncb1 <=#Tp 1'b0; else RxAbortSyncb1 <=#Tp RxAbortSync2; end always @ (posedge MRxClk or posedge Reset) begin if(Reset) RxAbortSyncb2 <=#Tp 1'b0; else RxAbortSyncb2 <=#Tp RxAbortSyncb1; end // Interrupts assign TxB_IRQ = 1'b0; assign TxE_IRQ = 1'b0; assign RxB_IRQ = 1'b0; assign RxF_IRQ = 1'b0; assign Busy_IRQ = 1'b0; endmodule
Go to most recent revision | Compare with Previous | Blame | View Log