Subversion Repositories openmsp430

//----------------------------------------------------------------------------
// Copyright (C) 2009 , Olivier Girard
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//     * Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
//     * Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in the
//       documentation and/or other materials provided with the distribution.
//     * Neither the name of the authors nor the names of its contributors
//       may be used to endorse or promote products derived from this software
//       without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
// OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
// THE POSSIBILITY OF SUCH DAMAGE
//
//----------------------------------------------------------------------------
//
// *File Name: omsp_watchdog.v
//
// *Module Description:
//                       Watchdog Timer
//
// *Author(s):
//              - Olivier Girard,    olgirard@gmail.com
//
//----------------------------------------------------------------------------
// $Rev$
// $LastChangedBy$
// $LastChangedDate$
//----------------------------------------------------------------------------
`ifdef OMSP_NO_INCLUDE
`else
`include "openMSP430_defines.v"
`endif
 
module  omsp_watchdog (
 
// OUTPUTs
    per_dout,                       // Peripheral data output
    wdt_irq,                        // Watchdog-timer interrupt
    wdt_reset,                      // Watchdog-timer reset
    wdt_wkup,                       // Watchdog Wakeup
    wdtifg,                         // Watchdog-timer interrupt flag
    wdtnmies,                       // Watchdog-timer NMI edge selection
 
// INPUTs
    aclk,                           // ACLK
    aclk_en,                        // ACLK enable
    dbg_freeze,                     // Freeze Watchdog counter
    mclk,                           // Main system clock
    per_addr,                       // Peripheral address
    per_din,                        // Peripheral data input
    per_en,                         // Peripheral enable (high active)
    per_we,                         // Peripheral write enable (high active)
    por,                            // Power-on reset
    puc_rst,                        // Main system reset
    scan_enable,                    // Scan enable (active during scan shifting)
    scan_mode,                      // Scan mode
    smclk,                          // SMCLK
    smclk_en,                       // SMCLK enable
    wdtie,                          // Watchdog timer interrupt enable
    wdtifg_irq_clr,                 // Watchdog-timer interrupt flag irq accepted clear
    wdtifg_sw_clr,                  // Watchdog-timer interrupt flag software clear
    wdtifg_sw_set                   // Watchdog-timer interrupt flag software set
);
 
// OUTPUTs
//=========
output       [15:0] per_dout;       // Peripheral data output
output              wdt_irq;        // Watchdog-timer interrupt
output              wdt_reset;      // Watchdog-timer reset
output              wdt_wkup;       // Watchdog Wakeup
output              wdtifg;         // Watchdog-timer interrupt flag
output              wdtnmies;       // Watchdog-timer NMI edge selection
 
// INPUTs
//=========
input               aclk;           // ACLK
input               aclk_en;        // ACLK enable
input               dbg_freeze;     // Freeze Watchdog counter
input               mclk;           // Main system clock
input        [13:0] per_addr;       // Peripheral address
input        [15:0] per_din;        // Peripheral data input
input               per_en;         // Peripheral enable (high active)
input         [1:0] per_we;         // Peripheral write enable (high active)
input               por;            // Power-on reset
input               puc_rst;        // Main system reset
input               scan_enable;    // Scan enable (active during scan shifting)
input               scan_mode;      // Scan mode
input               smclk;          // SMCLK
input               smclk_en;       // SMCLK enable
input               wdtie;          // Watchdog timer interrupt enable
input               wdtifg_irq_clr; // Clear Watchdog-timer interrupt flag
input               wdtifg_sw_clr;  // Watchdog-timer interrupt flag software clear
input               wdtifg_sw_set;  // Watchdog-timer interrupt flag software set
 
 
//=============================================================================
// 1)  PARAMETER DECLARATION
//=============================================================================
 
// Register base address (must be aligned to decoder bit width)
parameter       [14:0] BASE_ADDR   = 15'h0120;
 
// Decoder bit width (defines how many bits are considered for address decoding)
parameter              DEC_WD      =  2;
 
// Register addresses offset
parameter [DEC_WD-1:0] WDTCTL      = 'h0;
 
// Register one-hot decoder utilities
parameter              DEC_SZ      =  (1 << DEC_WD);
parameter [DEC_SZ-1:0] BASE_REG    =  {{DEC_SZ-1{1'b0}}, 1'b1};
 
// Register one-hot decoder
parameter [DEC_SZ-1:0] WDTCTL_D    = (BASE_REG << WDTCTL);
 
 
//============================================================================
// 2)  REGISTER DECODER
//============================================================================
 
// Local register selection
wire              reg_sel   =  per_en & (per_addr[13:DEC_WD-1]==BASE_ADDR[14:DEC_WD]);
 
// Register local address
wire [DEC_WD-1:0] reg_addr  =  {per_addr[DEC_WD-2:0], 1'b0};
 
// Register address decode
wire [DEC_SZ-1:0] reg_dec   =  (WDTCTL_D & {DEC_SZ{(reg_addr==WDTCTL)}});
 
// Read/Write probes
wire              reg_write =  |per_we & reg_sel;
wire              reg_read  = ~|per_we & reg_sel;
 
// Read/Write vectors
wire [DEC_SZ-1:0] reg_wr    = reg_dec & {DEC_SZ{reg_write}};
wire [DEC_SZ-1:0] reg_rd    = reg_dec & {DEC_SZ{reg_read}};
 
 
//============================================================================
// 3) REGISTERS
//============================================================================
 
// WDTCTL Register
//-----------------
// WDTNMI is not implemented and therefore masked
 
reg  [7:0] wdtctl;
 
wire       wdtctl_wr = reg_wr[WDTCTL];
 
`ifdef CLOCK_GATING
wire       mclk_wdtctl;
omsp_clock_gate clock_gate_wdtctl (.gclk(mclk_wdtctl),
                                   .clk (mclk), .enable(wdtctl_wr), .scan_enable(scan_enable));
`else
wire       UNUSED_scan_enable = scan_enable;
wire       mclk_wdtctl        = mclk;
`endif
 
`ifdef NMI
parameter [7:0] WDTNMIES_MASK = 8'h40;
`else
parameter [7:0] WDTNMIES_MASK = 8'h00;
`endif
 
`ifdef ASIC_CLOCKING
  `ifdef WATCHDOG_MUX
parameter [7:0] WDTSSEL_MASK  = 8'h04;
  `else
parameter [7:0] WDTSSEL_MASK  = 8'h00;
  `endif
`else
parameter [7:0] WDTSSEL_MASK  = 8'h04;
`endif
 
parameter [7:0] WDTCTL_MASK   = (8'b1001_0011 | WDTSSEL_MASK | WDTNMIES_MASK);
 
always @ (posedge mclk_wdtctl or posedge puc_rst)
  if (puc_rst)        wdtctl <=  8'h00;
`ifdef CLOCK_GATING
  else                wdtctl <=  per_din[7:0] & WDTCTL_MASK;
`else
  else if (wdtctl_wr) wdtctl <=  per_din[7:0] & WDTCTL_MASK;
`endif
 
wire       wdtpw_error = wdtctl_wr & (per_din[15:8]!=8'h5a);
wire       wdttmsel    = wdtctl[4];
wire       wdtnmies    = wdtctl[6];
 
 
//============================================================================
// 4) DATA OUTPUT GENERATION
//============================================================================
 
`ifdef NMI
parameter [7:0] WDTNMI_RD_MASK  = 8'h20;
`else
parameter [7:0] WDTNMI_RD_MASK  = 8'h00;
`endif
`ifdef WATCHDOG_MUX
parameter [7:0] WDTSSEL_RD_MASK = 8'h00;
`else
  `ifdef WATCHDOG_NOMUX_ACLK
parameter [7:0] WDTSSEL_RD_MASK = 8'h04;
  `else
parameter [7:0] WDTSSEL_RD_MASK = 8'h00;
  `endif
`endif
parameter [7:0] WDTCTL_RD_MASK  = WDTNMI_RD_MASK | WDTSSEL_RD_MASK;
 
// Data output mux
wire [15:0] wdtctl_rd  = {8'h69, wdtctl | WDTCTL_RD_MASK} & {16{reg_rd[WDTCTL]}};
wire [15:0] per_dout   =  wdtctl_rd;
 
 
//=============================================================================
// 5)  WATCHDOG TIMER (ASIC IMPLEMENTATION)
//=============================================================================
`ifdef ASIC_CLOCKING
 
// Watchdog clock source selection
//---------------------------------
wire wdt_clk;
 
`ifdef WATCHDOG_MUX
omsp_clock_mux clock_mux_watchdog (
   .clk_out   (wdt_clk),
   .clk_in0   (smclk),
   .clk_in1   (aclk),
   .reset     (puc_rst),
   .scan_mode (scan_mode),
   .select_in (wdtctl[2])
);
`else
  `ifdef WATCHDOG_NOMUX_ACLK
     assign wdt_clk      = aclk;
     wire   UNUSED_smclk = smclk;
  `else
     wire   UNUSED_aclk  = aclk;
     assign wdt_clk      = smclk;
  `endif
`endif
 
// Reset synchronizer for the watchdog local clock domain
//--------------------------------------------------------
 
wire wdt_rst_noscan;
wire wdt_rst;
 
// Reset Synchronizer
omsp_sync_reset sync_reset_por (
    .rst_s        (wdt_rst_noscan),
    .clk          (wdt_clk),
    .rst_a        (puc_rst)
);
 
// Scan Reset Mux
omsp_scan_mux scan_mux_wdt_rst (
    .scan_mode    (scan_mode),
    .data_in_scan (puc_rst),
    .data_in_func (wdt_rst_noscan),
    .data_out     (wdt_rst)
);
 
 
// Watchog counter clear (synchronization)
//-----------------------------------------
 
// Toggle bit whenever the watchog needs to be cleared
reg        wdtcnt_clr_toggle;
wire       wdtcnt_clr_detect = (wdtctl_wr & per_din[3]);
always @ (posedge mclk or posedge puc_rst)
  if (puc_rst)                wdtcnt_clr_toggle <= 1'b0;
  else if (wdtcnt_clr_detect) wdtcnt_clr_toggle <= ~wdtcnt_clr_toggle;
 
// Synchronization
wire wdtcnt_clr_sync;
omsp_sync_cell sync_cell_wdtcnt_clr (
    .data_out  (wdtcnt_clr_sync),
    .data_in   (wdtcnt_clr_toggle),
    .clk       (wdt_clk),
    .rst       (wdt_rst)
);
 
// Edge detection
reg wdtcnt_clr_sync_dly;
always @ (posedge wdt_clk or posedge wdt_rst)
  if (wdt_rst)  wdtcnt_clr_sync_dly <= 1'b0;
  else          wdtcnt_clr_sync_dly <= wdtcnt_clr_sync;
 
wire wdtqn_edge;
wire wdtcnt_clr = (wdtcnt_clr_sync ^ wdtcnt_clr_sync_dly) | wdtqn_edge;
 
 
// Watchog counter increment (synchronization)
//----------------------------------------------
wire wdtcnt_incr;
 
omsp_sync_cell sync_cell_wdtcnt_incr (
    .data_out  (wdtcnt_incr),
    .data_in   (~wdtctl[7] & ~dbg_freeze),
    .clk       (wdt_clk),
    .rst       (wdt_rst)
);
 
 
// Watchdog 16 bit counter
//--------------------------
reg  [15:0] wdtcnt;
 
wire [15:0] wdtcnt_nxt  = wdtcnt+16'h0001;
 
`ifdef CLOCK_GATING
wire       wdtcnt_en   = wdtcnt_clr | wdtcnt_incr;
wire       wdt_clk_cnt;
omsp_clock_gate clock_gate_wdtcnt (.gclk(wdt_clk_cnt),
                                   .clk (wdt_clk), .enable(wdtcnt_en), .scan_enable(scan_enable));
`else
wire       wdt_clk_cnt = wdt_clk;
`endif
 
always @ (posedge wdt_clk_cnt or posedge wdt_rst)
  if (wdt_rst)           wdtcnt <= 16'h0000;
  else if (wdtcnt_clr)   wdtcnt <= 16'h0000;
`ifdef CLOCK_GATING
  else                   wdtcnt <= wdtcnt_nxt;
`else
  else if (wdtcnt_incr)  wdtcnt <= wdtcnt_nxt;
`endif
 
 
// Local synchronizer for the wdtctl.WDTISx
// configuration (note that we can live with
// a full bus synchronizer as it won't hurt
// if we get a wrong WDTISx value for a
// single clock cycle)
//--------------------------------------------
reg [1:0] wdtisx_s;
reg [1:0] wdtisx_ss;
always @ (posedge wdt_clk_cnt or posedge wdt_rst)
  if (wdt_rst)
    begin
       wdtisx_s  <=  2'h0;
       wdtisx_ss <=  2'h0;
    end
  else
    begin
       wdtisx_s  <=  wdtctl[1:0];
       wdtisx_ss <=  wdtisx_s;
    end
 
 
// Interval selection mux
//--------------------------
reg        wdtqn;
 
always @(wdtisx_ss or wdtcnt_nxt)
    case(wdtisx_ss)
      2'b00  : wdtqn =  wdtcnt_nxt[15];
      2'b01  : wdtqn =  wdtcnt_nxt[13];
      2'b10  : wdtqn =  wdtcnt_nxt[9];
      default: wdtqn =  wdtcnt_nxt[6];
    endcase
 
 
// Watchdog event detection
//-----------------------------
 
// Interval end detection
assign     wdtqn_edge =  (wdtqn & wdtcnt_incr);
 
// Toggle bit for the transmition to the MCLK domain
reg        wdt_evt_toggle;
always @ (posedge wdt_clk_cnt or posedge wdt_rst)
  if (wdt_rst)         wdt_evt_toggle <= 1'b0;
  else if (wdtqn_edge) wdt_evt_toggle <= ~wdt_evt_toggle;
 
// Synchronize in the MCLK domain
wire       wdt_evt_toggle_sync;
omsp_sync_cell sync_cell_wdt_evt (
    .data_out  (wdt_evt_toggle_sync),
    .data_in   (wdt_evt_toggle),
    .clk       (mclk),
    .rst       (puc_rst)
);
 
// Delay for edge detection of the toggle bit
reg        wdt_evt_toggle_sync_dly;
always @ (posedge mclk or posedge puc_rst)
  if (puc_rst) wdt_evt_toggle_sync_dly <= 1'b0;
  else         wdt_evt_toggle_sync_dly <= wdt_evt_toggle_sync;
 
wire       wdtifg_evt =  (wdt_evt_toggle_sync_dly ^ wdt_evt_toggle_sync) | wdtpw_error;
 
 
// Watchdog wakeup generation
//-------------------------------------------------------------
 
// Clear wakeup when the watchdog flag is cleared (glitch free)
reg  wdtifg_clr_reg;
wire wdtifg_clr;
always @ (posedge mclk or posedge puc_rst)
  if (puc_rst) wdtifg_clr_reg <= 1'b1;
  else         wdtifg_clr_reg <= wdtifg_clr;
 
// Set wakeup when the watchdog event is detected (glitch free)
reg  wdtqn_edge_reg;
always @ (posedge wdt_clk_cnt or posedge wdt_rst)
  if (wdt_rst) wdtqn_edge_reg <= 1'b0;
  else         wdtqn_edge_reg <= wdtqn_edge;
 
// Watchdog wakeup cell
wire wdt_wkup_pre;
omsp_wakeup_cell wakeup_cell_wdog (
                                   .wkup_out   (wdt_wkup_pre),    // Wakup signal (asynchronous)
                                   .scan_clk   (mclk),            // Scan clock
                                   .scan_mode  (scan_mode),       // Scan mode
                                   .scan_rst   (puc_rst),         // Scan reset
                                   .wkup_clear (wdtifg_clr_reg),  // Glitch free wakeup event clear
                                   .wkup_event (wdtqn_edge_reg)   // Glitch free asynchronous wakeup event
);
 
// When not in HOLD, the watchdog can generate a wakeup when:
//     - in interval mode (if interrupts are enabled)
//     - in reset mode (always)
reg  wdt_wkup_en;
always @ (posedge mclk or posedge puc_rst)
  if (puc_rst) wdt_wkup_en <= 1'b0;
  else         wdt_wkup_en <= ~wdtctl[7] & (~wdttmsel | (wdttmsel & wdtie));
 
// Make wakeup when not enabled
wire wdt_wkup;
omsp_and_gate and_wdt_wkup (.y(wdt_wkup), .a(wdt_wkup_pre), .b(wdt_wkup_en));
 
 
// Watchdog interrupt flag
//------------------------------
reg        wdtifg;
 
wire       wdtifg_set =  wdtifg_evt                  |  wdtifg_sw_set;
assign     wdtifg_clr =  (wdtifg_irq_clr & wdttmsel) |  wdtifg_sw_clr;
 
always @ (posedge mclk or posedge por)
  if (por)             wdtifg <=  1'b0;
  else if (wdtifg_set) wdtifg <=  1'b1;
  else if (wdtifg_clr) wdtifg <=  1'b0;
 
 
// Watchdog interrupt generation
//---------------------------------
wire    wdt_irq       = wdttmsel & wdtifg & wdtie;
 
 
// Watchdog reset generation
//-----------------------------
reg     wdt_reset;
 
always @ (posedge mclk or posedge por)
  if (por) wdt_reset <= 1'b0;
  else     wdt_reset <= wdtpw_error | (wdtifg_set & ~wdttmsel);
 
 
// LINT cleanup
wire        UNUSED_smclk_en = smclk_en;
wire        UNUSED_aclk_en  = aclk_en;
 
 
//=============================================================================
// 6)  WATCHDOG TIMER (FPGA IMPLEMENTATION)
//=============================================================================
`else
 
// Watchdog clock source selection
//---------------------------------
wire  clk_src_en = wdtctl[2] ? aclk_en : smclk_en;
 
 
// Watchdog 16 bit counter
//--------------------------
reg [15:0] wdtcnt;
 
wire        wdtifg_evt;
wire        wdtcnt_clr  = (wdtctl_wr & per_din[3]) | wdtifg_evt;
wire        wdtcnt_incr = ~wdtctl[7] & clk_src_en & ~dbg_freeze;
 
wire [15:0] wdtcnt_nxt  = wdtcnt+16'h0001;
 
always @ (posedge mclk or posedge puc_rst)
  if (puc_rst)           wdtcnt <= 16'h0000;
  else if (wdtcnt_clr)   wdtcnt <= 16'h0000;
  else if (wdtcnt_incr)  wdtcnt <= wdtcnt_nxt;
 
 
// Interval selection mux
//--------------------------
reg        wdtqn;
 
always @(wdtctl or wdtcnt_nxt)
    case(wdtctl[1:0])
      2'b00  : wdtqn =  wdtcnt_nxt[15];
      2'b01  : wdtqn =  wdtcnt_nxt[13];
      2'b10  : wdtqn =  wdtcnt_nxt[9];
      default: wdtqn =  wdtcnt_nxt[6];
    endcase
 
 
// Watchdog event detection
//-----------------------------
 
assign     wdtifg_evt =  (wdtqn & wdtcnt_incr) | wdtpw_error;
 
 
// Watchdog interrupt flag
//------------------------------
reg        wdtifg;
 
wire       wdtifg_set =  wdtifg_evt                  |  wdtifg_sw_set;
wire       wdtifg_clr =  (wdtifg_irq_clr & wdttmsel) |  wdtifg_sw_clr;
 
always @ (posedge mclk or posedge por)
  if (por)             wdtifg <=  1'b0;
  else if (wdtifg_set) wdtifg <=  1'b1;
  else if (wdtifg_clr) wdtifg <=  1'b0;
 
 
// Watchdog interrupt generation
//---------------------------------
wire    wdt_irq       = wdttmsel & wdtifg & wdtie;
wire    wdt_wkup      =  1'b0;
 
 
// Watchdog reset generation
//-----------------------------
reg     wdt_reset;
 
always @ (posedge mclk or posedge por)
  if (por) wdt_reset <= 1'b0;
  else     wdt_reset <= wdtpw_error | (wdtifg_set & ~wdttmsel);
 
 
// LINT cleanup
wire        UNUSED_scan_mode = scan_mode;
wire        UNUSED_smclk     = smclk;
wire        UNUSED_aclk      = aclk;
`endif
wire [15:0] UNUSED_per_din   = per_din;
 
endmodule // omsp_watchdog
 
`ifdef OMSP_NO_INCLUDE
`else
`include "openMSP430_undefines.v"
`endif