URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_pm.v] - Rev 333
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// OR1200's Power Management //// //// //// //// This file is part of the OpenRISC 1200 project //// //// http://www.opencores.org/cores/or1k/ //// //// //// //// Description //// //// PM according to OR1K architectural specification. //// //// //// //// To Do: //// //// - add support for dynamic clock gating //// //// //// //// Author(s): //// //// - Damjan Lampret, lampret@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: or1200_pm.v,v $ // Revision 2.0 2010/06/30 11:00:00 ORSoC // No update // // Revision 1.1 2002/01/03 08:16:15 lampret // New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs. // // Revision 1.8 2001/10/21 17:57:16 lampret // Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF. // // Revision 1.7 2001/10/14 13:12:10 lampret // MP3 version. // // Revision 1.1.1.1 2001/10/06 10:18:35 igorm // no message // // Revision 1.2 2001/08/09 13:39:33 lampret // Major clean-up. // // Revision 1.1 2001/07/20 00:46:21 lampret // Development version of RTL. Libraries are missing. // // // synopsys translate_off `include "timescale.v" // synopsys translate_on `include "or1200_defines.v" module or1200_pm( // RISC Internal Interface clk, rst, pic_wakeup, spr_write, spr_addr, spr_dat_i, spr_dat_o, // Power Management Interface pm_clksd, pm_cpustall, pm_dc_gate, pm_ic_gate, pm_dmmu_gate, pm_immu_gate, pm_tt_gate, pm_cpu_gate, pm_wakeup, pm_lvolt ); // // RISC Internal Interface // input clk; // Clock input rst; // Reset input pic_wakeup; // Wakeup from the PIC input spr_write; // SPR Read/Write input [31:0] spr_addr; // SPR Address input [31:0] spr_dat_i; // SPR Write Data output [31:0] spr_dat_o; // SPR Read Data // // Power Management Interface // input pm_cpustall; // Stall the CPU output [3:0] pm_clksd; // Clock Slowdown factor output pm_dc_gate; // Gate DCache clock output pm_ic_gate; // Gate ICache clock output pm_dmmu_gate; // Gate DMMU clock output pm_immu_gate; // Gate IMMU clock output pm_tt_gate; // Gate Tick Timer clock output pm_cpu_gate; // Gate main RISC/CPU clock output pm_wakeup; // Activate (de-gate) all clocks output pm_lvolt; // Lower operating voltage `ifdef OR1200_PM_IMPLEMENTED // // Power Management Register bits // reg [3:0] sdf; // Slow-down factor reg dme; // Doze Mode Enable reg sme; // Sleep Mode Enable reg dcge; // Dynamic Clock Gating Enable // // Internal wires // wire pmr_sel; // PMR select // // PMR address decoder (partial decoder) // `ifdef OR1200_PM_PARTIAL_DECODING assign pmr_sel = (spr_addr[`OR1200_SPR_GROUP_BITS] == `OR1200_SPRGRP_PM) ? 1'b1 : 1'b0; `else assign pmr_sel = ((spr_addr[`OR1200_SPR_GROUP_BITS] == `OR1200_SPRGRP_PM) && (spr_addr[`OR1200_SPR_OFS_BITS] == `OR1200_PM_OFS_PMR)) ? 1'b1 : 1'b0; `endif // // Write to PMR and also PMR[DME]/PMR[SME] reset when // pic_wakeup is asserted // always @(posedge clk or posedge rst) if (rst) {dcge, sme, dme, sdf} <= 7'b0; else if (pmr_sel && spr_write) begin sdf <= spr_dat_i[`OR1200_PM_PMR_SDF]; dme <= spr_dat_i[`OR1200_PM_PMR_DME]; sme <= spr_dat_i[`OR1200_PM_PMR_SME]; dcge <= spr_dat_i[`OR1200_PM_PMR_DCGE]; end else if (pic_wakeup) begin dme <= 1'b0; sme <= 1'b0; end // // Read PMR // `ifdef OR1200_PM_READREGS assign spr_dat_o[`OR1200_PM_PMR_SDF] = sdf; assign spr_dat_o[`OR1200_PM_PMR_DME] = dme; assign spr_dat_o[`OR1200_PM_PMR_SME] = sme; assign spr_dat_o[`OR1200_PM_PMR_DCGE] = dcge; `ifdef OR1200_PM_UNUSED_ZERO assign spr_dat_o[`OR1200_PM_PMR_UNUSED] = 25'b0; `endif `endif // // Generate pm_clksd // assign pm_clksd = sdf; // // Statically generate all clock gate outputs // TODO: add dynamic clock gating feature // assign pm_cpu_gate = (dme | sme) & ~pic_wakeup; assign pm_dc_gate = pm_cpu_gate; assign pm_ic_gate = pm_cpu_gate; assign pm_dmmu_gate = pm_cpu_gate; assign pm_immu_gate = pm_cpu_gate; assign pm_tt_gate = sme & ~pic_wakeup; // // Assert pm_wakeup when pic_wakeup is asserted // assign pm_wakeup = pic_wakeup; // // Assert pm_lvolt when pm_cpu_gate or pm_cpustall are asserted // assign pm_lvolt = pm_cpu_gate | pm_cpustall; `else // // When PM is not implemented, drive all outputs as would when PM is disabled // assign pm_clksd = 4'b0; assign pm_cpu_gate = 1'b0; assign pm_dc_gate = 1'b0; assign pm_ic_gate = 1'b0; assign pm_dmmu_gate = 1'b0; assign pm_immu_gate = 1'b0; assign pm_tt_gate = 1'b0; assign pm_wakeup = 1'b1; assign pm_lvolt = 1'b0; // // Read PMR // `ifdef OR1200_PM_READREGS assign spr_dat_o[`OR1200_PM_PMR_SDF] = 4'b0; assign spr_dat_o[`OR1200_PM_PMR_DME] = 1'b0; assign spr_dat_o[`OR1200_PM_PMR_SME] = 1'b0; assign spr_dat_o[`OR1200_PM_PMR_DCGE] = 1'b0; `ifdef OR1200_PM_UNUSED_ZERO assign spr_dat_o[`OR1200_PM_PMR_UNUSED] = 25'b0; `endif `endif `endif endmodule
Go to most recent revision | Compare with Previous | Blame | View Log