URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] [uart16550/] [uart_wb.v] - Rev 599
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// uart_wb.v //// //// //// //// //// //// This file is part of the "UART 16550 compatible" project //// //// http://www.opencores.org/cores/uart16550/ //// //// //// //// Documentation related to this project: //// //// - http://www.opencores.org/cores/uart16550/ //// //// //// //// Projects compatibility: //// //// - WISHBONE //// //// RS232 Protocol //// //// 16550D uart (mostly supported) //// //// //// //// Overview (main Features): //// //// UART core WISHBONE interface. //// //// //// //// Known problems (limits): //// //// Inserts one wait state on all transfers. //// //// Note affected signals and the way they are affected. //// //// //// //// To Do: //// //// Nothing. //// //// //// //// Author(s): //// //// - gorban@opencores.org //// //// - Jacob Gorban //// //// - Igor Mohor (igorm@opencores.org) //// //// //// //// Created: 2001/05/12 //// //// Last Updated: 2001/05/17 //// //// (See log for the revision history) //// //// //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000, 2001 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.16 2002/07/29 21:16:18 gorban // The uart_defines.v file is included again in sources. // // Revision 1.15 2002/07/22 23:02:23 gorban // Bug Fixes: // * Possible loss of sync and bad reception of stop bit on slow baud rates fixed. // Problem reported by Kenny.Tung. // * Bad (or lack of ) loopback handling fixed. Reported by Cherry Withers. // // Improvements: // * Made FIFO's as general inferrable memory where possible. // So on FPGA they should be inferred as RAM (Distributed RAM on Xilinx). // This saves about 1/3 of the Slice count and reduces P&R and synthesis times. // // * Added optional baudrate output (baud_o). // This is identical to BAUDOUT* signal on 16550 chip. // It outputs 16xbit_clock_rate - the divided clock. // It's disabled by default. Define UART_HAS_BAUDRATE_OUTPUT to use. // // Revision 1.12 2001/12/19 08:03:34 mohor // Warnings cleared. // // Revision 1.11 2001/12/06 14:51:04 gorban // Bug in LSR[0] is fixed. // All WISHBONE signals are now sampled, so another wait-state is introduced on all transfers. // // Revision 1.10 2001/12/03 21:44:29 gorban // Updated specification documentation. // Added full 32-bit data bus interface, now as default. // Address is 5-bit wide in 32-bit data bus mode. // Added wb_sel_i input to the core. It's used in the 32-bit mode. // Added debug interface with two 32-bit read-only registers in 32-bit mode. // Bits 5 and 6 of LSR are now only cleared on TX FIFO write. // My small test bench is modified to work with 32-bit mode. // // Revision 1.9 2001/10/20 09:58:40 gorban // Small synopsis fixes // // Revision 1.8 2001/08/24 21:01:12 mohor // Things connected to parity changed. // Clock devider changed. // // Revision 1.7 2001/08/23 16:05:05 mohor // Stop bit bug fixed. // Parity bug fixed. // WISHBONE read cycle bug fixed, // OE indicator (Overrun Error) bug fixed. // PE indicator (Parity Error) bug fixed. // Register read bug fixed. // // Revision 1.4 2001/05/31 20:08:01 gorban // FIFO changes and other corrections. // // Revision 1.3 2001/05/21 19:12:01 gorban // Corrected some Linter messages. // // Revision 1.2 2001/05/17 18:34:18 gorban // First 'stable' release. Should be sythesizable now. Also added new header. // // Revision 1.0 2001-05-17 21:27:13+02 jacob // Initial revision // // // UART core WISHBONE interface // // Author: Jacob Gorban (jacob.gorban@flextronicssemi.com) // Company: Flextronics Semiconductor // // synopsys translate_off `include "timescale.v" // synopsys translate_on `include "uart_defines.v" module uart_wb (clk, wb_rst_i, wb_we_i, wb_stb_i, wb_cyc_i, wb_ack_o, wb_adr_i, wb_adr_int, wb_dat_i, wb_dat_o, wb_dat8_i, wb_dat8_o, wb_dat32_o, wb_sel_i, we_o, re_o // Write and read enable output for the core ); input clk; // WISHBONE interface input wb_rst_i; input wb_we_i; input wb_stb_i; input wb_cyc_i; input [3:0] wb_sel_i; input [`UART_ADDR_WIDTH-1:0] wb_adr_i; //WISHBONE address line `ifdef DATA_BUS_WIDTH_8 input [7:0] wb_dat_i; //input WISHBONE bus output [7:0] wb_dat_o; reg [7:0] wb_dat_o; wire [7:0] wb_dat_i; reg [7:0] wb_dat_is; `else // for 32 data bus mode input [31:0] wb_dat_i; //input WISHBONE bus output [31:0] wb_dat_o; reg [31:0] wb_dat_o; wire [31:0] wb_dat_i; reg [31:0] wb_dat_is; `endif // !`ifdef DATA_BUS_WIDTH_8 output [`UART_ADDR_WIDTH-1:0] wb_adr_int; // internal signal for address bus input [7:0] wb_dat8_o; // internal 8 bit output to be put into wb_dat_o output [7:0] wb_dat8_i; input [31:0] wb_dat32_o; // 32 bit data output (for debug interface) output wb_ack_o; output we_o; output re_o; wire we_o; reg wb_ack_o; reg [7:0] wb_dat8_i; wire [7:0] wb_dat8_o; wire [`UART_ADDR_WIDTH-1:0] wb_adr_int; // internal signal for address bus reg [`UART_ADDR_WIDTH-1:0] wb_adr_is; reg wb_we_is; reg wb_cyc_is; reg wb_stb_is; reg [3:0] wb_sel_is; wire [3:0] wb_sel_i; reg wre ;// timing control signal for write or read enable // wb_ack_o FSM reg [1:0] wbstate; always @(posedge clk or posedge wb_rst_i) if (wb_rst_i) begin wb_ack_o <= 1'b0; wbstate <= 0; wre <= 1'b1; end else case (wbstate) 0: begin if (wb_stb_is & wb_cyc_is) begin wre <= 0; wbstate <= 1; wb_ack_o <= 1; end else begin wre <= 1; wb_ack_o <= 0; end end 1: begin wb_ack_o <= 0; wbstate <= 2; wre <= 0; end 2,3: begin wb_ack_o <= 0; wbstate <= 0; wre <= 0; end endcase assign we_o = wb_we_is & wb_stb_is & wb_cyc_is & wre ; //WE for registers assign re_o = ~wb_we_is & wb_stb_is & wb_cyc_is & wre ; //RE for registers // Sample input signals always @(posedge clk or posedge wb_rst_i) if (wb_rst_i) begin wb_adr_is <= 0; wb_we_is <= 0; wb_cyc_is <= 0; wb_stb_is <= 0; wb_dat_is <= 0; wb_sel_is <= 0; end else begin wb_adr_is <= wb_adr_i; wb_we_is <= wb_we_i; wb_cyc_is <= wb_cyc_i; wb_stb_is <= wb_stb_i; wb_dat_is <= wb_dat_i; wb_sel_is <= wb_sel_i; end `ifdef DATA_BUS_WIDTH_8 // 8-bit data bus always @(posedge clk or posedge wb_rst_i) if (wb_rst_i) wb_dat_o <= 0; else wb_dat_o <= wb_dat8_o; always @(wb_dat_is) wb_dat8_i = wb_dat_is; assign wb_adr_int = wb_adr_is; `else // 32-bit bus // put output to the correct byte in 32 bits using select line always @(posedge clk or posedge wb_rst_i) if (wb_rst_i) wb_dat_o <= 0; else if (re_o) case (wb_sel_is) 4'b0001: wb_dat_o <= {24'b0, wb_dat8_o}; 4'b0010: wb_dat_o <= {16'b0, wb_dat8_o, 8'b0}; 4'b0100: wb_dat_o <= {8'b0, wb_dat8_o, 16'b0}; 4'b1000: wb_dat_o <= {wb_dat8_o, 24'b0}; 4'b1111: wb_dat_o <= wb_dat32_o; // debug interface output default: wb_dat_o <= 0; endcase // case(wb_sel_i) reg [1:0] wb_adr_int_lsb; always @(wb_sel_is or wb_dat_is) begin case (wb_sel_is) 4'b0001 : wb_dat8_i = wb_dat_is[7:0]; 4'b0010 : wb_dat8_i = wb_dat_is[15:8]; 4'b0100 : wb_dat8_i = wb_dat_is[23:16]; 4'b1000 : wb_dat8_i = wb_dat_is[31:24]; default : wb_dat8_i = wb_dat_is[7:0]; endcase // case(wb_sel_i) `ifdef LITLE_ENDIAN case (wb_sel_is) 4'b0001 : wb_adr_int_lsb = 2'h0; 4'b0010 : wb_adr_int_lsb = 2'h1; 4'b0100 : wb_adr_int_lsb = 2'h2; 4'b1000 : wb_adr_int_lsb = 2'h3; default : wb_adr_int_lsb = 2'h0; endcase // case(wb_sel_i) `else case (wb_sel_is) 4'b0001 : wb_adr_int_lsb = 2'h3; 4'b0010 : wb_adr_int_lsb = 2'h2; 4'b0100 : wb_adr_int_lsb = 2'h1; 4'b1000 : wb_adr_int_lsb = 2'h0; default : wb_adr_int_lsb = 2'h0; endcase // case(wb_sel_i) `endif end assign wb_adr_int = {wb_adr_is[`UART_ADDR_WIDTH-1:2], wb_adr_int_lsb}; `endif // !`ifdef DATA_BUS_WIDTH_8 endmodule
Go to most recent revision | Compare with Previous | Blame | View Log