Subversion Repositories openrisc

#ifndef CYGONCE_CERF_H
#define CYGONCE_CERF_H
 
/*=============================================================================
//
//      cerfpda.h
//
//      Platform specific support (register layout, etc)
//
//=============================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//=============================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    gthomas
// Contributors: gthomas
// Date:         2000-05-08
// Purpose:      Intel SA1110/Assabet platform specific support routines
// Description: 
// Usage:        #include <cyg/hal/cerfpda.h>
//
//####DESCRIPTIONEND####
//
//===========================================================================*/
 
 
#ifndef __ASSEMBLER__
//
// Board Control Register
// Note: This register is write-only.  Thus a shadow copy is provided so that
// it may be safely updated/shared by multiple threads.
//
extern unsigned long _cerfpda_BCR;  // Shadow copy
 
extern void cerfpda_BCR(unsigned long mask, unsigned long value);
 
#endif
 
// 
// Signal assertion levels
//
#define SA1110_LOGIC_ONE(m)  (m & 0xFFFFFFFF)
#define SA1110_LOGIC_ZERO(m) (m & 0x00000000)
 
//
// SA1110/Cerf Board Control Register
//
#define SA1110_BOARD_CONTROL        REG32_PTR(0x10000000)
#define SA1110_BCR_MIN              0x00000000     // Reset state
 
#define SA1110_BCR_CF_POWER         0x00000000     // 1 = CompactFlash power on (##### NA ######)
#define SA1110_BCR_CF_POWER_ON      SA1110_LOGIC_ONE(SA1110_BCR_CF_POWER)
#define SA1110_BCR_CF_POWER_OFF     SA1110_LOGIC_ZERO(SA1110_BCR_CF_POWER)
#define SA1110_BCR_CF_RESET         0x00000000     // 1 = CompactFlash reset (##### NA #####)
#define SA1110_BCR_CF_RESET_ENABLE  SA1110_LOGIC_ONE(SA1110_BCR_CF_RESET)
#define SA1110_BCR_CF_RESET_DISABLE SA1110_LOGIC_ZERO(SA1110_BCR_CF_RESET)
#define SA1110_BCR_SOFT_RESET       0x00000004     // 0 = resets UCB1300, ADI7171, UDA1341
#define SA1110_BCR_IRDA_FREQ        0x00000008     // 0 = SIR, 1 = MIR/FIR
#define SA1110_BCR_IRDA_MD          0x00000030     // IrDA Mode & range
#define SA1110_BCR_IRDA_MD_MAX      0x00000000     // Max range and power
#define SA1110_BCR_IRDA_MD_OFF      0x00000010     // Shutdown
#define SA1110_BCR_IRDA_MD_23       0x00000020     // 2/3 power
#define SA1110_BCR_IRDA_MD_13       0x00000030     // 1/3 power
#define SA1110_BCR_STEREO_LB        0x00000040     // 1 = Stereo loopback on
#define SA1110_BCR_CF_BUS           0x00000000     // 0 = CompactFlash bus on (##### NA #####)
#define SA1110_BCR_CF_BUS_ON        SA1110_LOGIC_ZERO(SA1110_BCR_CF_BUS)
#define SA1110_BCR_CF_BUS_OFF       SA1110_LOGIC_ONE(SA1110_BCR_CF_BUS)
#define SA1110_BCR_AUDIO_ON         0x00000100     // 1 = UDA1341, MIC, DAA power on
#define SA1110_BCR_BACKLIGHT        0x00000200     // 1 = LCD backlight on
#define SA1110_BCR_LCD_BPP          0x00000400     // 1 = 16 RGB, 0 = 12 RGB
#define SA1110_BCR_LCD_16BPP        SA1110_LOGIC_ONE(SA1110_BCR_LCD_BPP)
#define SA1110_BCR_LCD_12BPP        SA1110_LOGIC_ZERO(SA1110_BCR_LCD_BPP)
#define SA1110_BCR_LCD              0x00000800     // 1 = LCD panel and controller on
#define SA1110_BCR_LCD_ON           SA1110_LOGIC_ONE(SA1110_BCR_LCD)
#define SA1110_BCR_LCD_OFF          SA1110_LOGIC_ZERO(SA1110_BCR_LCD)
#define SA1110_BCR_RS232_ENABLE     0x00001000     // 1 = Enable RS232 signals
#define SA1110_BCR_RED_LED          0x00000001     // 0 = Red LED on
#define SA1110_BCR_RED_LED_ON       SA1110_LOGIC_ZERO(SA1110_BCR_RED_LED)
#define SA1110_BCR_RED_LED_OFF      SA1110_LOGIC_ONE(SA1110_BCR_RED_LED)
#define SA1110_BCR_GREEN_LED        0x00000002     // 0 = Green LED on
#define SA1110_BCR_GREEN_LED_ON     SA1110_LOGIC_ZERO(SA1110_BCR_GREEN_LED)
#define SA1110_BCR_GREEN_LED_OFF    SA1110_LOGIC_ONE(SA1110_BCR_GREEN_LED)
#define SA1110_BCR_MOTOR            0x00000004     // 1 = Vibrator motor on
#define SA1110_BCR_MOTOR_ON         SA1110_LOGIC_ONE(SA1110_BCR_MOTOR)
#define SA1110_BCR_MOTOR_OFF        SA1110_LOGIC_ZERO(SA1110_BCR_MOTOR)
#define SA1110_BCR_COM_DTR          0x00010000     // COM port Data Terminal Ready
#define SA1110_BCR_COM_RTS          0x00020000     // COM port Request To Send
#define SA1110_BCR_RADIO_WAKE       0x00040000     // 1 = Wake up CPU with radio
#define SA1110_BCR_MUTE             0x00200000     // 1 = Audio muted
 
#define SA1110_BCR_ETH_SLEEP        (1 << 27)      // Output pin to put Crystal LAN in sleep mode.
 
//
// Special purpose GPIO interrupt mappings
//
#define SA1110_CF_IRQ               CYGNUM_HAL_INTERRUPT_GPIO22
#define SA1110_CF_DETECT            CYGNUM_HAL_INTERRUPT_GPIO23
#define SA1110_IRQ_GPIO_ETH         CYGNUM_HAL_INTERRUPT_GPIO26
#define SA1110_IRQ_GPIO_16X5X       CYGNUM_HAL_INTERRUPT_GPIO3
//
// GPIO layout
//
#define SA1110_GPIO_CF_DETECT       0x00800000     // 0 = Compact Flash detect
#define SA1110_GPIO_CF_PRESENT      SA1110_LOGIC_ZERO(SA1110_GPIO_CF_DETECT)
//#define SA1110_GPIO_CF_ABSENT       SA1110_LOGIC_ONE(SA1110_GPIO_CF_DETECT)
 
//
// LCD Controller
//
#define SA1110_LCCR0                SA11X0_REGISTER(0x30100000)
#define SA1110_LCSR                 SA11X0_REGISTER(0x30100004)
#define SA1110_DBAR1                SA11X0_REGISTER(0x30100010)
#define SA1110_DCAR1                SA11X0_REGISTER(0x30100014)
#define SA1110_DBAR2                SA11X0_REGISTER(0x30100018)
#define SA1110_DCAR2                SA11X0_REGISTER(0x3010001C)
#define SA1110_LCCR1                SA11X0_REGISTER(0x30100020)
#define SA1110_LCCR2                SA11X0_REGISTER(0x30100024)
#define SA1110_LCCR3                SA11X0_REGISTER(0x30100028)
 
/*---------------------------------------------------------------------------*/
/* end of cerfpda.h                                                          */
#endif /* CYGONCE_CERF_H */