URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-2.0/] [packages/] [hal/] [mn10300/] [am31/] [v2_0/] [include/] [variant.inc] - Rev 323
Go to most recent revision | Compare with Previous | Blame | View Log
#ifndef CYGONCE_HAL_VARIANT_INC
#define CYGONCE_HAL_VARIANT_INC
##=============================================================================
##
## variant.inc
##
## AM31 assembler header file
##
##=============================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
##=============================================================================
#######DESCRIPTIONBEGIN####
##
## Author(s): nickg
## Contributors: nickg
## Date: 1999-04-06
## Purpose: AM31 definitions.
## Description: This file contains various definitions and macros that are
## useful for writing assembly code for the AM31 CPU variant.
## Usage:
## #include <cyg/hal/variant.inc>
## ...
##
##
######DESCRIPTIONEND####
##
##=============================================================================
#include <pkgconf/hal.h>
#include <cyg/hal/platform.inc>
#------------------------------------------------------------------------------
# Register definitions
#define NMICR 0x34000100 // NMI control register
#define DCR 0x20000030 // Debug control register
#define ISR 0x20000034 // Interrupt control register
#define DCR_DE 0x0010 // DE bit in DCR
#------------------------------------------------------------------------------
# CPU state save and restore macros
.macro hal_cpu_save_all
movm [d2,d3,a2,a3,other],(sp) # push all registers
.endm
.macro hal_cpu_load_all
movm (sp),[d2,d3,a2,a3,other] # pop regs
.endm
.macro hal_cpu_get_psw reg
mov psw,\reg
.endm
.macro hal_cpu_set_psw reg
mov \reg,psw
.endm
# Location of PC in saved register context (HAL_SavedRegisters)
#define SAVED_CONTEXT_PC_OFFSET 56
##-----------------------------------------------------------------------------
# It appears that there is an undocumented extra bit
# in the PSW that masks the delivery of NMIs. It is in
# the upper 16 bits of the register that we cannot access
# directly. So, to clear it, we must set up a fake interrupt
# state and do an RTI to load the PSW. We need to do this if
# we are going to be able to set breakpoints in NMI handlers.
# Note that the AM33 has a documented NMID at bit 17 of the
# extended PSW (along with instructions to access it).
.macro hal_cpu_clear_nmid
mov PSW,d3 # D3 = PSW
and 0xFFFF,d3
mov nmid\@,d2 # D2 = Next PC
movm [d2,d3],(sp) # Push
rti # and load into CPU
nmid\@:
.endm
##-----------------------------------------------------------------------------
## Register addresses and initialization values
.equ IOBCTR ,0x32000010
.equ MEMCTR0 ,0x32000020
.equ MEMCTR1 ,0x32000022
.equ MEMCTR2 ,0x32000024
.equ MEMCTR3 ,0x32000026
.equ MEMCTR4 ,0x32000028
.equ MEMCTR5 ,0x3200002a
.equ MEMCTR6 ,0x3200002c
.equ MEMCTR7 ,0x3200002e
.equ DRAMCTR ,0x32000040
.equ REFCNT ,0x32000042
.equ INIT_MEMCTR0,0x1200 # 2wait
.equ INIT_MEMCTR1,0x0120 # 1wait-32bit-
.equ INIT_MEMCTR2,0x0065
.equ INIT_DRAMCTR,0x0287
.equ INIT_REFCNT,0x00eb
.equ P2OUT ,0x36008004
.equ P2MD ,0x36008024
.equ P2SS ,0x36008044
.equ P2DIR ,0x36008064
.equ INIT_P2MD,0xf0
.equ INIT_P2DIR,0xff
#------------------------------------------------------------------------------
# MEMC macros.
#ifndef CYGPKG_HAL_MN10300_MEMC_DEFINED
.macro hal_memc_init
mov INIT_MEMCTR0,d2
movhu d2,(MEMCTR0)
mov INIT_MEMCTR1,d2
movhu d2,(MEMCTR1)
mov INIT_MEMCTR2,d2
movhu d2,(MEMCTR2)
mov INIT_REFCNT,d2
movhu d2,(REFCNT)
mov INIT_DRAMCTR,d2
movhu d2,(DRAMCTR)
.endm
#define CYGPKG_HAL_MN10300_MEMC_DEFINED
#endif
##-----------------------------------------------------------------------------
# Default interrupt decoding macros.
#ifndef CYGPKG_HAL_MN10300_INTC_DEFINED
# initialize all interrupts to disabled
.macro hal_intc_init
.endm
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
#define CYG_ISR_TABLE_SIZE 10
.macro hal_intc_decode dreg,areg,dreg1
mov _mn10300_interrupt_control,\areg
movhu (0x100,\areg),\dreg1 # dreg1 = IAGR
mov (0,a2),\dreg # dreg = vector priority
mov \dreg1,(0,a2) # store real vector in saved state
asl 2,\dreg # dreg = byte index of isr
add 12,\dreg # skip NMI vectors
.endm
#define CYGPKG_HAL_MN10300_INTC_DECODE_DEFINED
#else
#define CYG_ISR_TABLE_SIZE 34
# decode the interrupt
.macro hal_intc_decode dreg,areg,dreg1
mov _mn10300_interrupt_control,\areg
movhu (0x100,\areg),\dreg # dreg = IAGR
mov \dreg,(0,a2) # store real vector in saved state
add 12,\dreg # skip NMI vectors
.endm
#define CYGPKG_HAL_MN10300_INTC_DECODE_DEFINED
#endif
#define CYGPKG_HAL_MN10300_INTC_DEFINED
#endif
#------------------------------------------------------------------------------
# Diagnostics macros.
#ifndef CYGPKG_HAL_MN10300_DIAG_DEFINED
.macro hal_diag_init
# Set up LED
mov INIT_P2MD,d2
movbu d2,(P2MD)
mov INIT_P2DIR,d2
movbu d2,(P2DIR)
.endm
.macro hal_diag_excpt_start
.endm
.macro hal_diag_intr_start
.endm
.macro hal_diag_restore
.endm
.macro hal_diag_led val
movm [d2],(sp)
mov \val,d2
asl 4,d2
movbu d2,(P2OUT)
movm (sp),[d2]
.endm
.macro hal_diag_data
led_count: .long 0
led_value: .byte 0x40
led_foo1: .byte 0x00 # Keep alignment to work around compiler/linker bug
led_foo2: .byte 0x00
led_foo3: .byte 0x00
.endm
#define CYGPKG_HAL_MN10300_DIAG_DEFINED
#endif
#------------------------------------------------------------------------------
# Monitor initialization.
#ifndef CYGPKG_HAL_MN10300_MON_DEFINED
.macro hal_mon_init
hal_mon_init_vectors
hal_mon_init_vsr
.endm
#if defined(CYG_HAL_STARTUP_ROM) || \
defined(CYGPKG_HAL_MN10300_AM31_SIM)
.macro hal_mon_init_vectors
mov _mn10300_interrupt_vectors,a0
mov __hardware_vector_0,d0
movhu d0,(0,a0)
mov __hardware_vector_1,d0
movhu d0,(4,a0)
mov __hardware_vector_2,d0
movhu d0,(8,a0)
mov __hardware_vector_3,d0
movhu d0,(12,a0)
mov __hardware_vector_4,d0
movhu d0,(16,a0)
mov __hardware_vector_5,d0
movhu d0,(20,a0)
mov __hardware_vector_6,d0
movhu d0,(24,a0)
.endm
#else
.macro hal_mon_init_vectors
.endm
#endif
#if defined(CYG_HAL_STARTUP_RAM)
# init vsr table in SRAM where the ROM
# vectors the interrupts.
.macro hal_mon_init_vsr
mov _hal_vsr_table,a0
mov __default_interrupt_vsr,d0
mov d0,(0,a0)
mov d0,(4,a0)
mov d0,(8,a0)
#ifndef CYGSEM_HAL_USE_ROM_MONITOR_CygMon
# When using Cygmon, leave level 3 for GDB
# Ctrl-C interrupts.
mov d0,(12,a0)
#endif
mov d0,(16,a0)
mov d0,(20,a0)
mov d0,(24,a0)
mov __default_nmi_vsr,d0
mov d0,(28,a0)
mov __default_trap_vsr,d0
mov d0,(32,a0)
.endm
#else
.macro hal_mon_init_vsr
.endm
#endif
#if !(defined(CYG_HAL_STARTUP_ROM) || \
defined(CYGPKG_HAL_MN10300_AM31_SIM) || \
!defined(CYGSEM_HAL_USE_ROM_MONITOR))
#define CYG_HAL_MN10300_VSR_TABLE_DEFINED
#endif
#define CYGPKG_HAL_MN10300_MON_DEFINED
#endif
#------------------------------------------------------------------------------
#endif // ifndef CYGONCE_HAL_VARIANT_INC
# end of variant.inc
Go to most recent revision | Compare with Previous | Blame | View Log