URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [hal/] [frv/] [arch/] [current/] [src/] [hal_misc.c] - Rev 853
Go to most recent revision | Compare with Previous | Blame | View Log
/*========================================================================== // // hal_misc.c // // HAL miscellaneous functions // //========================================================================== // ####ECOSGPLCOPYRIGHTBEGIN#### // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. // // eCos is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free // Software Foundation; either version 2 or (at your option) any later // version. // // eCos is distributed in the hope that it will be useful, but WITHOUT // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License // for more details. // // You should have received a copy of the GNU General Public License // along with eCos; if not, write to the Free Software Foundation, Inc., // 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. // // As a special exception, if other files instantiate templates or use // macros or inline functions from this file, or you compile this file // and link it with other works to produce a work based on this file, // this file does not by itself cause the resulting work to be covered by // the GNU General Public License. However the source code for this file // must still be made available in accordance with section (3) of the GNU // General Public License v2. // // This exception does not invalidate any other reasons why a work based // on this file might be covered by the GNU General Public License. // ------------------------------------------- // ####ECOSGPLCOPYRIGHTEND#### //========================================================================== //#####DESCRIPTIONBEGIN#### // // Author(s): nickg, gthomas // Contributors: nickg, gthomas // Date: 1999-02-20 // Purpose: HAL miscellaneous functions // Description: This file contains miscellaneous functions provided by the // HAL. // //####DESCRIPTIONEND#### // //=========================================================================*/ #include <pkgconf/hal.h> #include <pkgconf/hal_frv.h> #ifdef CYGPKG_KERNEL #include <pkgconf/kernel.h> #endif #ifdef CYGPKG_CYGMON #include <pkgconf/cygmon.h> #endif #include <cyg/infra/cyg_type.h> #include <cyg/infra/cyg_trac.h> // tracing macros #include <cyg/infra/cyg_ass.h> // assertion macros #include <cyg/infra/diag.h> #include <cyg/hal/hal_arch.h> // HAL header #include <cyg/hal/hal_intr.h> // HAL header #include <cyg/hal/hal_cache.h> // HAL header /*------------------------------------------------------------------------*/ /* First level C exception handler. */ externC void __handle_exception (void); externC HAL_SavedRegisters *_hal_registers; #ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS // Historical - this datum is defined by the GDB stubs if present externC #endif void* volatile __mem_fault_handler; #if 0 #ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS /* Force exception handling into the GDB stubs. This is done by taking over the exception vectors while executing in the stubs. This allows for the debugged program to handle exceptions itself, except while the GDB processing is underway. The only vector that can't be handled this way is the illegal instruction vector which is used for breakpoint/single-step and must be maintained by the stubs at all times. Note: the interrupt vectors are _not_ preempted as the stubs probably can't handle them properly. */ #define ARM_VECTORS 8 extern unsigned long vectors[]; // exception vectors as defined by the stubs #if !defined(CYGPKG_CYGMON) static unsigned long *hardware_vectors = (unsigned long *)0x20; static unsigned long hold_vectors[ARM_VECTORS]; static int exception_level; static void __take_over_debug_traps(void) { hold_vectors[CYGNUM_HAL_VECTOR_ABORT_PREFETCH] = hardware_vectors[CYGNUM_HAL_VECTOR_ABORT_PREFETCH]; hardware_vectors[CYGNUM_HAL_VECTOR_ABORT_PREFETCH] = vectors[CYGNUM_HAL_VECTOR_ABORT_PREFETCH]; hold_vectors[CYGNUM_HAL_VECTOR_ABORT_DATA] = hardware_vectors[CYGNUM_HAL_VECTOR_ABORT_DATA]; hardware_vectors[CYGNUM_HAL_VECTOR_ABORT_DATA] = vectors[CYGNUM_HAL_VECTOR_ABORT_DATA]; } static void __restore_debug_traps(void) { hardware_vectors[CYGNUM_HAL_VECTOR_ABORT_PREFETCH] = hold_vectors[CYGNUM_HAL_VECTOR_ABORT_PREFETCH]; hardware_vectors[CYGNUM_HAL_VECTOR_ABORT_DATA] = hold_vectors[CYGNUM_HAL_VECTOR_ABORT_DATA]; } #endif // !CYGPKG_CYGMON #endif #endif // if 0 void exception_handler(HAL_SavedRegisters *regs) { // Special case handler for code which has chosen to take care // of data exceptions (i.e. code which expects them to happen) // This is common in discovery code, e.g. checking for a particular // device which may generate an exception when probing if the // device is not present if (__mem_fault_handler && regs->vector == CYGNUM_HAL_EXCEPTION_DATA_ACCESS) { regs->pc = (unsigned long)__mem_fault_handler; return; // Caught an exception inside stubs } #if defined(CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS) && !defined(CYGPKG_CYGMON) //?? if (++exception_level == 1) __take_over_debug_traps(); _hal_registers = regs; __handle_exception(); //?? if (--exception_level == 0) __restore_debug_traps(); #elif defined(CYGPKG_KERNEL_EXCEPTIONS) // We should decode the vector and pass a more appropriate // value as the second argument. For now we simply pass a // pointer to the saved registers. We should also divert // breakpoint and other debug vectors into the debug stubs. cyg_hal_deliver_exception( regs->vector, (CYG_ADDRWORD)regs ); #else CYG_FAIL("Exception!!!"); #endif return; } void hal_spurious_IRQ(HAL_SavedRegisters *regs) CYGBLD_ATTRIB_WEAK; void hal_spurious_IRQ(HAL_SavedRegisters *regs) { #if defined(CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS) exception_handler(regs); #else CYG_FAIL("Spurious interrupt!!"); #endif } /*------------------------------------------------------------------------*/ /* C++ support - run initial constructors */ #ifdef CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG cyg_bool cyg_hal_stop_constructors; #endif typedef void (*pfunc) (void); extern pfunc __CTOR_LIST__[]; extern pfunc __CTOR_END__[]; void cyg_hal_invoke_constructors (void) { #ifdef CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG static pfunc *p = &__CTOR_END__[-1]; cyg_hal_stop_constructors = 0; for (; p >= __CTOR_LIST__; p--) { (*p) (); if (cyg_hal_stop_constructors) { p--; break; } } #else pfunc *p; for (p = &__CTOR_END__[-1]; p >= __CTOR_LIST__; p--) { (*p) (); } #endif } /*------------------------------------------------------------------------*/ /* Architecture default ISR */ externC cyg_uint32 hal_arch_default_isr(CYG_ADDRWORD vector, CYG_ADDRWORD data) { CYG_TRACE1(true, "Interrupt: %d", vector); CYG_FAIL("Spurious Interrupt!!!"); return 0; } /*------------------------------------------------------------------------*/ /* Idle thread action */ void hal_idle_thread_action( cyg_uint32 count ) { } /*-------------------------------------------------------------------------*/ /* Misc functions */ #ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS__ /* This function will generate a breakpoint exception. It is used at the beginning of a program to sync up with a debugger and can be used otherwise as a quick means to stop program execution and "break" into the debugger. */ void breakpoint(void) { HAL_BREAKPOINT(_breakinst); } /* This function returns the opcode for a 'trap' instruction. */ unsigned long __break_opcode (void) { return HAL_BREAKINST; } #endif int hal_lsbindex(int mask) { int i; for (i = 0; i < 32; i++) { if (mask & (1<<i)) return (i); } return (-1); } int hal_msbindex(int mask) { int i; for (i = 31; i >= 0; i--) { if (mask & (1<<i)) return (i); } return (-1); } /*------------------------------------------------------------------------*/ // EOF hal_misc.c
Go to most recent revision | Compare with Previous | Blame | View Log