URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Source/] [portable/] [CodeWarrior/] [HCS12/] [portmacro.h] - Rev 580
Go to most recent revision | Compare with Previous | Blame | View Log
/* FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd. *************************************************************************** * * * If you are: * * * * + New to FreeRTOS, * * + Wanting to learn FreeRTOS or multitasking in general quickly * * + Looking for basic training, * * + Wanting to improve your FreeRTOS skills and productivity * * * * then take a look at the FreeRTOS books - available as PDF or paperback * * * * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * * http://www.FreeRTOS.org/Documentation * * * * A pdf reference manual is also available. Both are usually delivered * * to your inbox within 20 minutes to two hours when purchased between 8am * * and 8pm GMT (although please allow up to 24 hours in case of * * exceptional circumstances). Thank you for your support! * * * *************************************************************************** This file is part of the FreeRTOS distribution. FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception. ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for proprietary components outside of the FreeRTOS kernel. FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site. 1 tab == 4 spaces! http://www.FreeRTOS.org - Documentation, latest information, license and contact details. http://www.SafeRTOS.com - A version that is certified for use in safety critical systems. http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services. */ #ifndef PORTMACRO_H #define PORTMACRO_H /*----------------------------------------------------------- * Port specific definitions. * * The settings in this file configure FreeRTOS correctly for the * given hardware and compiler. * * These settings should not be altered. *----------------------------------------------------------- */ /* Type definitions. */ #define portCHAR char #define portFLOAT float #define portDOUBLE double #define portLONG long #define portSHORT short #define portSTACK_TYPE unsigned portCHAR #define portBASE_TYPE char #if( configUSE_16_BIT_TICKS == 1 ) typedef unsigned portSHORT portTickType; #define portMAX_DELAY ( portTickType ) 0xffff #else typedef unsigned portLONG portTickType; #define portMAX_DELAY ( portTickType ) 0xffffffff #endif /*-----------------------------------------------------------*/ /* Hardware specifics. */ #define portBYTE_ALIGNMENT 1 #define portSTACK_GROWTH ( -1 ) #define portTICK_RATE_MS ( ( portTickType ) 1000 / configTICK_RATE_HZ ) #define portYIELD() __asm( "swi" ); #define portNOP() __asm( "nop" ); /*-----------------------------------------------------------*/ /* Critical section handling. */ #define portENABLE_INTERRUPTS() __asm( "cli" ) #define portDISABLE_INTERRUPTS() __asm( "sei" ) /* * Disable interrupts before incrementing the count of critical section nesting. * The nesting count is maintained so we know when interrupts should be * re-enabled. Once interrupts are disabled the nesting count can be accessed * directly. Each task maintains its own nesting count. */ #define portENTER_CRITICAL() \ { \ extern volatile unsigned portBASE_TYPE uxCriticalNesting; \ \ portDISABLE_INTERRUPTS(); \ uxCriticalNesting++; \ } /* * Interrupts are disabled so we can access the nesting count directly. If the * nesting is found to be 0 (no nesting) then we are leaving the critical * section and interrupts can be re-enabled. */ #define portEXIT_CRITICAL() \ { \ extern volatile unsigned portBASE_TYPE uxCriticalNesting; \ \ uxCriticalNesting--; \ if( uxCriticalNesting == 0 ) \ { \ portENABLE_INTERRUPTS(); \ } \ } /*-----------------------------------------------------------*/ /* Task utilities. */ /* * These macros are very simple as the processor automatically saves and * restores its registers as interrupts are entered and exited. In * addition to the (automatically stacked) registers we also stack the * critical nesting count. Each task maintains its own critical nesting * count as it is legitimate for a task to yield from within a critical * section. If the banked memory model is being used then the PPAGE * register is also stored as part of the tasks context. */ #ifdef BANKED_MODEL /* * Load the stack pointer for the task, then pull the critical nesting * count and PPAGE register from the stack. The remains of the * context are restored by the RTI instruction. */ #define portRESTORE_CONTEXT() \ { \ extern volatile void * pxCurrentTCB; \ extern volatile unsigned portBASE_TYPE uxCriticalNesting; \ \ __asm( "ldx pxCurrentTCB" ); \ __asm( "lds 0, x" ); \ __asm( "pula" ); \ __asm( "staa uxCriticalNesting" ); \ __asm( "pula" ); \ __asm( "staa 0x30" ); /* 0x30 = PPAGE */ \ } /* * By the time this macro is called the processor has already stacked the * registers. Simply stack the nesting count and PPAGE value, then save * the task stack pointer. */ #define portSAVE_CONTEXT() \ { \ extern volatile void * pxCurrentTCB; \ extern volatile unsigned portBASE_TYPE uxCriticalNesting; \ \ __asm( "ldaa 0x30" ); /* 0x30 = PPAGE */ \ __asm( "psha" ); \ __asm( "ldaa uxCriticalNesting" ); \ __asm( "psha" ); \ __asm( "ldx pxCurrentTCB" ); \ __asm( "sts 0, x" ); \ } #else /* * These macros are as per the BANKED versions above, but without saving * and restoring the PPAGE register. */ #define portRESTORE_CONTEXT() \ { \ extern volatile void * pxCurrentTCB; \ extern volatile unsigned portBASE_TYPE uxCriticalNesting; \ \ __asm( "ldx pxCurrentTCB" ); \ __asm( "lds 0, x" ); \ __asm( "pula" ); \ __asm( "staa uxCriticalNesting" ); \ } #define portSAVE_CONTEXT() \ { \ extern volatile void * pxCurrentTCB; \ extern volatile unsigned portBASE_TYPE uxCriticalNesting; \ \ __asm( "ldaa uxCriticalNesting" ); \ __asm( "psha" ); \ __asm( "ldx pxCurrentTCB" ); \ __asm( "sts 0, x" ); \ } #endif /* * Utility macro to call macros above in correct order in order to perform a * task switch from within a standard ISR. This macro can only be used if * the ISR does not use any local (stack) variables. If the ISR uses stack * variables portYIELD() should be used in it's place. */ #define portTASK_SWITCH_FROM_ISR() \ portSAVE_CONTEXT(); \ vTaskSwitchContext(); \ portRESTORE_CONTEXT(); /* Task function macros as described on the FreeRTOS.org WEB site. */ #define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) #define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters ) #endif /* PORTMACRO_H */
Go to most recent revision | Compare with Previous | Blame | View Log